Thanks ^_^ I see ya! I don't really post tutorial or how to vids all that much, I'm more focused on creating music and posting that process on here, so if you're up for that then by all means welcome aboard! :D
LIFE SAVER !!!!!!!!!!!!! thank you soo much . i got a a ssl fusion i had it figured out then forgot . i also have rme so i was dealing with total mix which made it more complicated . i had to put total mix in daw mode and follow your steps !!!
How would you set up a KP3 to process (Factory mods) the selected tracks on the mixer inside FL ? As a external Fx processor recognized by FL, lets say.. Having some issues trying to setup this module into my studio. It has a lot of potencial, and FL does recognize KP3 via USB but thats pretty much it, can do nothing with it. Nice content man, thanks !
It would be cool if they made an update where you could send the signal out and back in as a plugin insert like in Pro Tools instead of only being able to send it out at the end of the mixer channel. If you wanted to use an outboard compressor on a vocal, it could just go out and then come back in directly to the next plugin on the chain.
Hey Tommy! There could be multiple reasons depending on the gear that you are using, as well as the settings used. If it's an electric noise (like a 60Hz Hum sound) it could be due to a ground loop, or the electrical outlet that you are running your wires to. It could be that your LINE IN level on the audio interface is very high, so it raises the noise floor, and since the compressor is already bringing the noise floor up due to compression, it can amplify that even more. It could also be the quality of the compressor, audio interface, or the TRS / XLR Cables used! Electrical interference could also play a role, make sure that no electric wires are overlapping your audio cables! If anything, bypass the compressor's effects, and make sure that you have that "unity gain" that I mentioned in the video. I hope this helps!
Nice bro but what happened to your antelope pure 2 ? I got some nice gear for fl stufio also i switch to fl 2 years ago i got me the apogee mk2 and neve summing mixer with my maag eq 4m fallowed by dangerous hardware compressor pure magic bro
The problem I'm having is how to setup Focusrite Clarett 8 Pre USB in the Focusrite Control software to be able to get the sound to come thru my Art Dual Limiter and my Pro VLA 2 compressor. Do you have any ideas on how to get this accomplish???
Hey! If the process is the signal coming OUT of the Focusrite Clarett into the Hardware, then back into the DAW, you would have to set the correct OUT routing in the FL Studio's Insert accordingly, and of course having another inesrt for the return of the signal with the IN set according to what you used. For Focusrite Control, what you would want to worry about, would be the monitoring of the Input that you want to hear, aka the signal coming back in. For that, you would have to set one of the headphones or OUT 1-2 to a custom mix, and set the correct playback and input according to what you have connected. It can be confusing, but once it's set, you'll be all good to go.
If the setup works in Logic Pro, then most likely, the problem would have resided in the routing in the Mixer in FL Studio! The Hard-Wiring should be set though!
The Antelope Audio Pure 2 Works is pretty much an Audio Interface with a Mastering Quality A/D Converter. It's sound quality surpasses the Clarett 8Pre by a long-shot! Perhaps this older video of mines can help give an Audio Demonstration! ruclips.net/video/0IPgEhvEGCY/видео.html
TRS cables will be balanced cables. TS cables are not! But it would be best to use TRS cables for these hardware devices. TS cables work best for instruments or live stage performances.
It's the first Fl outboard gear setup that I've seen!!! Thanks bro!
No problem! ^_^ I've made a couple more in the past, but this video really goes into the full depth of the whole setup.
Wow this is why y'all music sound so much better then my mixes. I am blown away by yr gear
Welph! I know what my next video will be on :P
nah its coz you make mix ... listen to mine
I'm marking this for learning.
..thanks!!
Im going into an analog heat a pair of EQPs a Magnetismus and a summing amp. This is gold
I so needed this video.
Sooo much info in this man instant sub
Thanks ^_^ I see ya! I don't really post tutorial or how to vids all that much, I'm more focused on creating music and posting that process on here, so if you're up for that then by all means welcome aboard! :D
LIFE SAVER !!!!!!!!!!!!! thank you soo much . i got a a ssl fusion i had it figured out then forgot . i also have rme so i was dealing with total mix which made it more complicated . i had to put total mix in daw mode and follow your steps !!!
Ayee that is wassup! ^_^ Glad this video helped ya! I seem to really make some good timing videos here and there. lol
How would you set up a KP3 to process (Factory mods) the selected tracks on the mixer inside FL ?
As a external Fx processor recognized by FL, lets say..
Having some issues trying to setup this module into my studio.
It has a lot of potencial, and FL does recognize KP3 via USB but thats pretty much it, can do nothing with it.
Nice content man, thanks !
Grateful for this info.🎉
It would be cool if they made an update where you could send the signal out and back in as a plugin insert like in Pro Tools instead of only being able to send it out at the end of the mixer channel. If you wanted to use an outboard compressor on a vocal, it could just go out and then come back in directly to the next plugin on the chain.
I Completely Agree. I wonder why they haven't made a return insert effect yet...
thank you !!
You're welcome! ^_^
Thanks for tutoring! Hey how do you think why is my compressor is making a lot of noise in FL?
Hey Tommy!
There could be multiple reasons depending on the gear that you are using, as well as the settings used.
If it's an electric noise (like a 60Hz Hum sound) it could be due to a ground loop, or the electrical outlet that you are running your wires to.
It could be that your LINE IN level on the audio interface is very high, so it raises the noise floor, and since the compressor is already bringing the noise floor up due to compression, it can amplify that even more.
It could also be the quality of the compressor, audio interface, or the TRS / XLR Cables used!
Electrical interference could also play a role, make sure that no electric wires are overlapping your audio cables!
If anything, bypass the compressor's effects, and make sure that you have that "unity gain" that I mentioned in the video.
I hope this helps!
This is very useful to me!
Glad to hear that it helps! ^_^
Oh...is it possible to use hdmi? To connect your audio with gold cables?
Nice bro but what happened to your antelope pure 2 ? I got some nice gear for fl stufio also i switch to fl 2 years ago i got me the apogee mk2 and neve summing mixer with my maag eq 4m fallowed by dangerous hardware compressor pure magic bro
0:52 It's there :P
The problem I'm having is how to setup Focusrite Clarett 8 Pre USB in the Focusrite Control software to be able to get the sound to come thru my Art Dual Limiter and my Pro VLA 2 compressor. Do you have any ideas on how to get this accomplish???
Hey! If the process is the signal coming OUT of the Focusrite Clarett into the Hardware, then back into the DAW, you would have to set the correct OUT routing in the FL Studio's Insert accordingly, and of course having another inesrt for the return of the signal with the IN set according to what you used. For Focusrite Control, what you would want to worry about, would be the monitoring of the Input that you want to hear, aka the signal coming back in.
For that, you would have to set one of the headphones or OUT 1-2 to a custom mix, and set the correct playback and input according to what you have connected.
It can be confusing, but once it's set, you'll be all good to go.
I see idet up my ssl fusion wrong in FL 21 but in logic it was cool
If the setup works in Logic Pro, then most likely, the problem would have resided in the routing in the Mixer in FL Studio! The Hard-Wiring should be set though!
@@OmoiSenpai yes I fix it and I enjoy it well wow waiting for the CARNABY HE2 EQ to get that harmonic from it 🔥🥳🥳
Nice Nice ^_^
Omoi !
^_^ I see ya!
❤
Q : can you explain when the pure 2 comes in play, is it when youre premaster is done you run it thru the 2pure to get a better master , or....?
The Antelope Audio Pure 2 Works is pretty much an Audio Interface with a Mastering Quality A/D Converter.
It's sound quality surpasses the Clarett 8Pre by a long-shot!
Perhaps this older video of mines can help give an Audio Demonstration!
ruclips.net/video/0IPgEhvEGCY/видео.html
Should the trs to trs be balanced?
TRS cables will be balanced cables.
TS cables are not!
But it would be best to use TRS cables for these hardware devices. TS cables work best for instruments or live stage performances.
I mix good beats without all this. I'm just bad at singing
Same, that's why I make shoegaze