Hi zed4me, is there a chance to have a copy of the manual you have used to setup the Sabvoton controller and Montenergy motor. I got exactly the same setup as you have in this video but I cannot find any manual / instructions on how to set the controller. Can you help me out?
Awesome, I like to convert my 125cc shifter cart to electric...can you please list where you got your parts for the conversion and estimated cost? My karts weight is more so I would need to get more batteries but motor, controller and accelerator should be fine. Please share your sources. thanks
I've never used such a large programmable esc before, but you should see if you can get an exponential curve/control on the throttle. Simply put, on the low end speed you have very fine control, but as you get higher and higher the sensitivity increases. It could make throttle feel more controlled.
well, I'd ask the kind people that has helped you out on all the technical stuff so far as you stated in the vid. I think the better term is "throttle curve", ask if/how to apply it in the settings. Also I'm no expert, but something "advanced" as this might not make a realistic difference in practice.
that Turnigy battery is 4S, 5.0ah, and 20C continuous and 30C peak. His arrangement is 20S2P .. or about 80 volts and 10ah total (looks like he has enough batteries to build two 20S2P packs). THese batteries sell for around $40 each .. or $200 per pack, maybe 5-10min run time? Each pack could put out 200amps .. but he said he was only going to use 100amps ... or 8000 watts ... a bit over 10hp. Sounds about right for the motor he selected.
Yeah...the electric motor itself cost MORE than a 20HP 5 speed+revers brand new 200cc honda clone. AKA the Lifan 200. Costs can be a little less than 400$ sometimes. Oh FYI 20HP = roughly 15KW. With the Lifan it comes with just about everything but a gas tank. Even has an electric starter. Meanwhile your spending $1K+ (my guess) with those expensive batteries and electrogizmos on a go kart that won't even go past 30mph. While the Lifan will probably push you past 80mph if you arent a fat ass and get your chain-tire size ratio right.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
To help people out and make everything a lot more easier can you pit links in the description to everything that you have gotten for your build
Or you could not be a lazy fuck and use google
The Q Or he could grow up to be a douchebag like you.
I'm using the same controller and motor. What is the color combination you used for the hall sensors?
I want this kit how to perches ?? & what is price?
I`m so curious how would your gokart drive,great project! Cheers from Europe!
WHATS THE SITE NAME THAT YOU JUST MENTIONED IN YOUR VIDEO?
Endless-sphere.com
endless-sphere.com/forums/
what program did you use to program the esc
how exactly does the displacement of the throttle feed into the controller to spin the motor?
Joshua Deonarinesingh the throttle is a hall effect throttle. When the throttle is pressed, the controller sees a higher voltage
how fast can it go?
and can you put links in bio?!
Hi Zed4me my name is Ian Maas. I have a question for you how do you hook up everything
how an engine rpm to give?
Hi, what speed controller is that
Do you fly quads? and what is the C-rating on those LiPos
I have a simple one but no I don't really fly them. These lipos are 20-30C discharge rated. I've read not to run them above 15C though.
cool, i would have gone after some of those 50c's lol would really scream, assuming your ESC could handle it
Michael s A lot of those 50C lipos are way overrated. I've used these packs on so many builds, they're the best bang for the buck
David Westernall its gonna be 5-7C continuous, nothing big.
Any issues with the wires getting hot? Thinking about doing the multistar 16000mah batteries.
what sprocket did you use? I want to make sure I have one that fits.
just got it off ebay and made sure it was the right shaft size i think this is 7/8"
Ok, thanks.
I dont want to bother you too much, bet whats the exact speed controller.
Sabvoton SVMC072150
Thanks.
what is each battery name and voltage
Hi zed4me, is there a chance to have a copy of the manual you have used to setup the Sabvoton controller and Montenergy motor. I got exactly the same setup as you have in this video but I cannot find any manual / instructions on how to set the controller. Can you help me out?
what is the name of the batttery charger
Awesome, I like to convert my 125cc shifter cart to electric...can you please list where you got your parts for the conversion and estimated cost? My karts weight is more so I would need to get more batteries but motor, controller and accelerator should be fine. Please share your sources.
thanks
Once everything is built up I'll do a total cost of build video and parts list so other people can replicate it.
zed4me perfect! thanks
i may have missed it but did you ever do this?
Links ?
I've never used such a large programmable esc before, but you should see if you can get an exponential curve/control on the throttle. Simply put, on the low end speed you have very fine control, but as you get higher and higher the sensitivity increases. It could make throttle feel more controlled.
Any idea how to make that happen?
well, I'd ask the kind people that has helped you out on all the technical stuff so far as you stated in the vid. I think the better term is "throttle curve", ask if/how to apply it in the settings. Also I'm no expert, but something "advanced" as this might not make a realistic difference in practice.
zed4me wondering about the parts list and where you get them. Thsnks
zed4me what is the name of te programable esc ? pls i need it
Hello Friend where I can get this battery give me any link if you have
Hobbyking
how much would all of this cost?
Just for the electric setup you're looking at $1000+
what are the specs of these lipo batteries?
that Turnigy battery is 4S, 5.0ah, and 20C continuous and 30C peak. His arrangement is 20S2P .. or about 80 volts and 10ah total (looks like he has enough batteries to build two 20S2P packs). THese batteries sell for around $40 each .. or $200 per pack, maybe 5-10min run time? Each pack could put out 200amps .. but he said he was only going to use 100amps ... or 8000 watts ... a bit over 10hp. Sounds about right for the motor he selected.
what kind is this motor
Robot Chanel watch my latest video on the go kart
friend u know me say how this costing this engine? vc could I psaar saite the shop where u bought. thank you and good evening
Omg I was looking for so long for a reliable moter and controler and this guy pointed to both
Need help to register forum
Sorry I have no affiliation other than being a member
ok thank you
awsome!
Yeah...the electric motor itself cost MORE than a 20HP 5 speed+revers brand new 200cc honda clone. AKA the Lifan 200. Costs can be a little less than 400$ sometimes. Oh FYI 20HP = roughly 15KW.
With the Lifan it comes with just about everything but a gas tank. Even has an electric starter. Meanwhile your spending $1K+ (my guess) with those expensive batteries and electrogizmos on a go kart that won't even go past 30mph. While the Lifan will probably push you past 80mph if you arent a fat ass and get your chain-tire size ratio right.
30mph!!?? I think not. 10kw is easily enough to get to 60mph with so much more acceleration
wow I NEED that motor! Nice videos keep it up!
$400 motor weeeeee
HELLO I am from TURKEY WHAT MOTOR VALUES ARE YOU USİNG (TÜRKÇE ÇEVİR ÖYLE YAZ KANALINI TAKİP EDİYORUM SÜPER)
Cell phones use lithium-ion (li-ion) not lithium polymer (lipo) battery's..
aren't you gonna use a torque converter with that motor?
No way. Electric motors don't need torque converters and also this motor would just be too powerful for it anyway.
maybe if you used torque converter (cvt) you will gain speed at lower rpm which save some battery charge or what !!
amr hakim Torque curve for electric motor very different from gasoline engine. A CVT is not gonna work well with an electric motor in 99% of cases.