For all how may have a couple of questions…. When fitting, you may have to bend quite a bit to get the whole thing in, do not worry, they are quite durable with strength so don’t worry about cracking, put on plenty of pressure. Which way should the clips be facing? If you watch 5:14, it will show the spike should be facing in towards the car Should I put clips on the front also? You can if you wish, although they should be a tight enough fit without needing this, so do the rear only. After fitting the front ones, my windows won’t go all the way up! Bring your window up and down, using your hand also as a small amount of pressure, and eventually bring the window all the way up using also the palm of your hand keep it like this for around 1 day, and when you next put the window up and down, it will go all the way. If you still have troubles, at the end (beside wing mirrow) pull it a slightly away from the car, and try again. You should hear a slight clicking noise.
I purchased the BMW e90 for my car, and Fiesta MK8 for my friend, they fit perfectly and really easily. Will buy again from the same seller if needed... ❤
I appreciate how the tutorial made everything clear 🙌.. Thanks for sharing your expertise and making it so easy for me to install these wind deflectors on my own!
I’ve just got mine through the door Saturday afternoon. I wondered how the clips go on as well because I thought I’ve been type all the way along the front ones but the type seems to be on the back ones all the way along and still got the clips on I will try it and see what happens I suppose. Thank you very much.
The strips of double sided tape on the long edges are so thin and short (not like in the video) I don't think they will do much. I'll put the clips in the rears but I've had to look in the comments to see if they are needed on the front.
Yer I didn't do none of that with mine but gotta say they look epic on my Dacia sandero 2020 model but the left windows was tricky fitting on but for some reason the drivers side was dead easy to install
Good video, some nice little pointers i.e. where to fix the clips and which way round to have them. Just fitted mine this evening, looks very nice and more attractive.... Now after watching these guidlines, will not fail to fit again in future...... Appreciated...
Excellent video. A note to say after putting both in the front window deflectors there's a noise, a soft thud, as the deflectors push into their original space. So I'll keep them shut for a week to see if this disapperars. Is this normal ? Thank you. Quality product.
Did this resolve? I have just installed mine and I am getting the same noise. Just want to make sure I've installed it properly, and the noise will go away.
My honda crv deflectors don't fit too well. You can see the parts that slide into the channel when installed. The front windows don't like them either. Tried pulling them and pushing the windows but they don't wanna know... 😢
Very helpful, but the fitting of the rear window clips was not as clear as it could have been as hands obscured the view. If this video is produced by the manufacturers I would just like to say it would be nice to see these also made without tint. I just don't see the need for them to be tinted, it just reduces vision.
Why would they fall off? If driving at high speed the windows would be closed pinching the flange of the wind deflectors between the glass and door frame. They only time they could possibly fall out is when the windows are open and not pinning them.
Fitted mine today then warhched the video. Double sided tape is too weak. Clips causing problems but will reinstall them only at the back. I suggest a thin rubber to seal. Rubber to rubber will not slip and there will be no need for the clips.
For all how may have a couple of questions….
When fitting, you may have to bend quite a bit to get the whole thing in, do not worry, they are quite durable with strength so don’t worry about cracking, put on plenty of pressure.
Which way should the clips be facing? If you watch 5:14, it will show the spike should be facing in towards the car
Should I put clips on the front also? You can if you wish, although they should be a tight enough fit without needing this, so do the rear only.
After fitting the front ones, my windows won’t go all the way up! Bring your window up and down, using your hand also as a small amount of pressure, and eventually bring the window all the way up using also the palm of your hand keep it like this for around 1 day, and when you next put the window up and down, it will go all the way. If you still have troubles, at the end (beside wing mirrow) pull it a slightly away from the car, and try again. You should hear a slight clicking noise.
Mine fitted perfectly. Thanks for the way the clips went in. Lets see how are on the M1 tomorrow.
How do they fair at high speeds?
I purchased the BMW e90 for my car, and Fiesta MK8 for my friend, they fit perfectly and really easily.
Will buy again from the same seller if needed...
❤
Thanks for your video, mine just arrived from you for my e90
Great informative video, had no fitting instructions & this was a great help. 👍
I’ve seen a demo say the smooth side of the clips face INTO the vehicle.
I appreciate how the tutorial made everything clear 🙌.. Thanks for sharing your expertise and making it so easy for me to install these wind deflectors on my own!
Glad it was helpful!
I’ve just got mine through the door Saturday afternoon. I wondered how the clips go on as well because I thought I’ve been type all the way along the front ones but the type seems to be on the back ones all the way along and still got the clips on I will try it and see what happens I suppose. Thank you very much.
The strips of double sided tape on the long edges are so thin and short (not like in the video) I don't think they will do much. I'll put the clips in the rears but I've had to look in the comments to see if they are needed on the front.
I definitely needed the clips for the rear but havent used them fron the fronts. They seem to be a snug fit and is on there quite solidly.
Update: They've now been on for 2 months and I've had no issues and driven on the motorway, very heavy rain and been through a car wash.
the clips, can you still see them from the outside of the car? mine wouldn't go any further and can still be seen
Yer I didn't do none of that with mine but gotta say they look epic on my Dacia sandero 2020 model but the left windows was tricky fitting on but for some reason the drivers side was dead easy to install
Good video, some nice little pointers i.e. where to fix the clips and which way round to have them. Just fitted mine this evening, looks very nice and more attractive....
Now after watching these guidlines, will not fail to fit again in future......
Appreciated...
Which way round do the clips fit ?????
❤ the spikes of the clips towards the rubber trim just need a little push with a screwdriver...
5:14 shows which way to fit it, just watch closely. The spike facing into the car.
Excellent video. A note to say after putting both in the front window deflectors there's a noise, a soft thud, as the deflectors push into their original space. So I'll keep them shut for a week to see if this disapperars. Is this normal ? Thank you. Quality product.
Did this resolve? I have just installed mine and I am getting the same noise. Just want to make sure I've installed it properly, and the noise will go away.
@@abusufian7966did the noise go away ?
Can you get thease for a s3 22 plate audi
The clips cannot be installed properly in Peugeot e-208.
The clips seems to fall off after installation.
Yes mine were the same felt loose when I fitted them
I don't know how to attach in my front windows, kept contact everytime
Are those metal clips just for back windows or front too?
Some of the clips when fitted don’t seem tight what can I do
Mine have came. What's the long strip for? Why did mine come with 2 small strips and 1 long strip? Shouldn't there be 4 smaller ones
After 4 months, are they good? They are durable?
My honda crv deflectors don't fit too well. You can see the parts that slide into the channel when installed. The front windows don't like them either. Tried pulling them and pushing the windows but they don't wanna know... 😢
@@TheSnozwangler do you mean the metal clips, we would recommend to use the front deflectors without fitting the clips as they should fit securely.
@@ibra82 no, not the metal clips but the actual plastic of the deflector.
Hello, are no clips needed for the front window?
In most cases you do not need the clips for the front wind deflector, once fitted, check if there is any movement of the deflector inside the channel.
Mine came with metal clips??
Very helpful, but the fitting of the rear window clips was not as clear as it could have been as hands obscured the view. If this video is produced by the manufacturers I would just like to say it would be nice to see these also made without tint. I just don't see the need for them to be tinted, it just reduces vision.
Bro clips are inside the pack? Or you have to bought outside?
Clips are supplied with the deflectors
@@ibra82 thanks mate
Can you not use a dab of super glue to fit them in the channel's so that they don't fall off at high speed's or strong winds.
Yes you can use super glue but we would recommend to apply on a very small area on two different spots.
Why would they fall off? If driving at high speed the windows would be closed pinching the flange of the wind deflectors between the glass and door frame. They only time they could possibly fall out is when the windows are open and not pinning them.
In strong winds the windows will probably be up.. holding them
In place
So why did I get metal clips with mines
Watch the full video
Fitted mine today then warhched the video. Double sided tape is too weak. Clips causing problems but will reinstall them only at the back. I suggest a thin rubber to seal. Rubber to rubber will not slip and there will be no need for the clips.
pas convaincu que ça tienne bien dans le temps ?????????????????