each time you come to the last radius of the pocket it does a sweep out and back in to start the cut again. What is the thought process behind this ? to let the mill ramp speed or chip clear..?
I can't imagine buying that piece of inconel, spend a lot of time programming all that, and putting wear on your mills and machine just to make a fake part. You could just put a chunk of wax or aluminum and a cheap ebay bit if you just want to show off a fake part.
Thanks for this vídeos do you have Spanish language or maybe consider that for the future, I’m located in MEXICO but I travel all the time to USA,MEXICO,CANADA,&BRASIL,all work related !!! God Bless
I would like to see a video of them using a JX3 insert on stainless. My work uses them for high temperature steel like inconel but refuses to use them on stainless saying "there not designed for that". Personally I think roughing out 4" of stainless with one JX3 vs multiple indexes of a cngg is worth it but what do I know I'm just a grunt.
How to setup 4th axis??... where to take offsets ...? How to take x y z A of 4th axis...?? Where to put offset??? What is difference between 3 axis and 4th axis A rotary axis???... Make detail videos and make playlist ...
@@TITANSofCNC sir...sir .... Sir oh dear sir.... I know you are so busy.... But I want 4th axis setup and Programming with taking offset of x y z A from beginning.... I only do 3 axis Programming.... I don't know anything about 4th rotary A axis attachment... Can you please please provide me any pdf/ documents/ video.... So i can learn
Have a look around. There are a lot of videos that go over this. NYC cnc has a lot of them, including this series: ruclips.net/video/CJFp9YjDqiY/видео.html Edit: I’m pretty sure titans goes over this in their academy with specific instructions for Fusion360.
@@caseywaite599 naahhhhh... Dear naah.... I looked and searched all videos for multi axis....4th 5th ... No one willing to give education top to bottom ... From beginning to end including setups and taking offset and making Program.....i Nyc channel is nice.... But Sometimes I feel that.... There is so many industries for cnc machining they also have monopoly .... If they will guide and make video regarding 4th and 5th axis then they will loose their job work.... So I don't think they will tell you exact procedure .... I know titans will see this comments ... what to do.... I don't know so i keep commenting on informative video to make videos about multi Axis.... because 3 axis is basic and easy to find content.... Also i know 4th and 5 axis machine type varies by different manufactur. May be these scenario we should consider.
I file a complaint against Tormach, an American company like a scammer. Tormach This company does not send the ordered goods. Of course, the approval was made in October 2021. I file a complaint against fraud against customers of these companies.
The title wasn’t kidding about it being a smooth toolpath, it’s so satisfying to watch. Swarf passes are such a cool toolpath to do
More of these type of videos please!
This is the 3rd in the series
The rest are in the academy 😉
@@TITANSofCNC More of these type of videos please!😃
These videos are cool, I like how you guys show the programming side of these operations
That video IS AWESOME! THANKS 😊
What's the tool life of the ceramic endmill with roughing like that in Monel?
Unglaublich toll!!!
The technology is fantastic BUT
The Teachnology is brilliant
Titan & his gang of game changers
All the Best 4 the NEW YEAR 🍾
How to make taper milling Programm...like NPT/BSPT thread milling Program in nx .... Please demonstrate or share video link
What are the best parameter for parting off tool (sandvik insert)and material SS
each time you come to the last radius of the pocket it does a sweep out and back in to start the cut again.
What is the thought process behind this ? to let the mill ramp speed or chip clear..?
It's just a lead in/lead out. Most Mastercam toolpath offer this feature. It's easier on the tool to do a smooth lead in and out.
what is this part that you're making?
What do you use for those burrs
I would like to see how you deburr that and still look good
Can y’all make a updated video or a few videos explain how to do simple set ups and the process to show beginners
Find videos under Fundamentals at Academy.TITANSofCNC.com
Nice. I know this is probably not a real part, but what kind of part is this based on?
Why would it not be real.... Inconel aint cheap
I can't imagine buying that piece of inconel, spend a lot of time programming all that, and putting wear on your mills and machine just to make a fake part. You could just put a chunk of wax or aluminum and a cheap ebay bit if you just want to show off a fake part.
@@crissd8283 There is usually an NDA involved when you build parts for other people.
Thanks for this vídeos do you have Spanish language or maybe consider that for the future, I’m located in MEXICO but I travel all the time to USA,MEXICO,CANADA,&BRASIL,all work related !!!
God Bless
Watch with RUclips subtitles
I ran 5 axis mag 3s by makino 5 axis is fun to watch
how does it not melt
I want to join in your company to work with you sir
God I’ve always hated working with that material. Ingvar too.
So good
Make video on 4 axis rotary table A axis jobs.... Make playlist of this 4 axis with all over different workpiece..... please
I would like to see a video of them using a JX3 insert on stainless. My work uses them for high temperature steel like inconel but refuses to use them on stainless saying "there not designed for that". Personally I think roughing out 4" of stainless with one JX3 vs multiple indexes of a cngg is worth it but what do I know I'm just a grunt.
Nice!
👍👍👍👍👍👍🇵🇱
beautiful
Оборотов много мне кажется)
That sound makes my skin crawl!
That tool is heating the machined areas it's cutting it could change the properties of the metal.
need coolant
How to setup 4th axis??... where to take offsets ...? How to take x y z A of 4th axis...?? Where to put offset??? What is difference between 3 axis and 4th axis A rotary axis???... Make detail videos and make playlist ...
We have a bunch of 4th axis on this channel and have some incredible fixturing also
@@TITANSofCNC sir...sir .... Sir oh dear sir.... I know you are so busy.... But I want 4th axis setup and Programming with taking offset of x y z A from beginning.... I only do 3 axis Programming.... I don't know anything about 4th rotary A axis attachment... Can you please please provide me any pdf/ documents/ video.... So i can learn
Have a look around. There are a lot of videos that go over this. NYC cnc has a lot of them, including this series:
ruclips.net/video/CJFp9YjDqiY/видео.html
Edit: I’m pretty sure titans goes over this in their academy with specific instructions for Fusion360.
@@caseywaite599 naahhhhh... Dear naah.... I looked and searched all videos for multi axis....4th 5th ... No one willing to give education top to bottom ... From beginning to end including setups and taking offset and making Program.....i Nyc channel is nice.... But Sometimes I feel that.... There is so many industries for cnc machining they also have monopoly .... If they will guide and make video regarding 4th and 5th axis then they will loose their job work.... So I don't think they will tell you exact procedure .... I know titans will see this comments ... what to do.... I don't know so i keep commenting on informative video to make videos about multi Axis.... because 3 axis is basic and easy to find content.... Also i know 4th and 5 axis machine type varies by different manufactur. May be these scenario we should consider.
@@CAMER_21 Learn like most of us and read machine manuals, trust me it works. lol
That's not cutting that's grinding the burrs says it all Hardening the material big time...
И сож не хватает
That inconel looks absolutely awful to machine, it's so stout. It's a brilliant alloy.
어떤 미친놈이 엔드밀 불나는데 가공하냐
I can do this on a engine lathe
I file a complaint against Tormach, an American company like a scammer.
Tormach This company does not send the ordered goods. Of course, the approval was made in October 2021. I file a complaint against fraud against customers of these companies.
Boring