A Better Way To Place Text On A Circle In Inkscape

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 131

  • @OOTUS
    @OOTUS Год назад +30

    Wow, didn't know that the "center text" option also works for text on path. I'm definitely using this method from now on, saves you a lot of hassle. Golden tip!

  • @Dobbo314
    @Dobbo314 Год назад +22

    In computer graphics the starting point for angles is to the "East" (with "North" being straight up); with positive angles moving clockwise. That is why the first text you place on a circle is where it is - not a random position. When you centred the text on the circle the centre point of the text will be placed at the 180 degree point (due "West"). You then used the "Rotate by 90 Clockwise" tool on the circle to position the text at the top; so you did, in fact, rotate the circle despite claiming no rotation was required.

    • @StanleyPinchak
      @StanleyPinchak Год назад +3

      No precise rotation with manual guides*
      Your mileage may vary.

    • @agerray
      @agerray Год назад

      So why was the text placed on the bottom right of the circle at the start of the video?

    • @doctormo
      @doctormo Год назад +4

      ​@@agerray That because the text is left aligned against the eastern line. So starting at zero degrees (which is the right side of the circle) and keep moving clockwise. If the test started out right aligned, then your text would End at the eastern line. When it's centered, it's in the middle between the start and end, or on the oposite side of the circle.
      - Inkscape developer

    • @doctormo
      @doctormo Год назад

      ​@@agerray That because the text is left aligned against the eastern line. So starting at zero degrees (which is the right side of the circle) and keep moving clockwise.
      - Inkscape developer

    • @agerray
      @agerray Год назад +1

      Thank you for the explanation - but as a "simple user" is there a reason why the text couldn't always simply be put on top of the path?

  • @lomicwind
    @lomicwind Год назад +11

    If only I knew it sooner, so simple trick ! Always fiddling with guides to be close to centered text. Thanks Nick !

  • @henningsjlie2235
    @henningsjlie2235 Месяц назад +1

    Had an issue, but I figured it out. Explaining it here to save anyone else the headache.
    When I used "object flip" vertical or horizontal, the text seemed to disappear. Flip 90 deg worked fine, though. This is because when you use flip vert or hor, the text goes inside the edge of the circle. This is apparent in the video, but not pointed out. If the text and the circle are the same color, the text will appear to be gone. Just change some colors, and voila.

  • @michaelsalais7393
    @michaelsalais7393 Год назад +2

    That is so much easier. Thanks for coming up with that, Nick. Love the mouse indicator.

  • @kevinfoo8031
    @kevinfoo8031 Год назад +3

    You always find more things about Inkscape, that's why I'm a subscriber.

  • @KirkWitmer
    @KirkWitmer Год назад +3

    Absolutely brilliant, Nick! Now, if we could just get you to do a tutorial on how to highlight our cursor, like you did for this lesson. ;)

    • @Qthekat1984
      @Qthekat1984 Год назад

      There are 3rd party Apps for your OS. Such as Cursor Highlight for Windows. Just do a web search...

  • @davidtrego-t1x
    @davidtrego-t1x Год назад

    I have only been working with Inkscape for a few months, but I always felt there had to be a more concrete way to do this. Thanks a lot of this post. Definitely adds to my confidence. I'm in the Philly/SJ burbs and now owe you a coffee haha.

  • @SuperWolfkin
    @SuperWolfkin Год назад +12

    I can't wait this is one of my biggest common struggles

  • @phillipschmidtpottery
    @phillipschmidtpottery 7 месяцев назад

    sweet! that is a much better way, and so obvious but still hidden until you brought it to light. Thanks a million!

  • @Vancittyy
    @Vancittyy Год назад

    This could not have come at a better time! I’m using this technique to design my own tattoo ❄️

  • @dannydotb
    @dannydotb Год назад

    Ah, Nick! I don't believe it, dude! I was working on something similar to this only yesterday! I just eyeballed the text by manually rotating it. If only you had this out two days earlier... Excellent video, by the way!

  • @ripudamanpandey1378
    @ripudamanpandey1378 Год назад +1

    Always the best tutorials from this guy ✨

  • @myshamey
    @myshamey 4 месяца назад

    Aaaaaaaaabsolutely fantastic film!!! Short, but full of useful tricks! Thanks a lot Nick!!! ❤❤❤❤❤❤❤

  • @ChrisKewl
    @ChrisKewl Месяц назад

    Thank you so much for this, it has made my life so much easier!

  • @chuckmoney1688
    @chuckmoney1688 Год назад

    Short and concise, excellent tutorial

  • @carpmanfishhead7063
    @carpmanfishhead7063 3 месяца назад

    Fantastic alternative Nick!

  • @johnfogg7858
    @johnfogg7858 Год назад +1

    Thank you!! That was very helpful. Can you explain how to place text at the top and bottom of the INSIDE of a circle?

  • @davidbolding8598
    @davidbolding8598 2 месяца назад

    Magic, Truely Magic, Thank you Nick

  • @alexg3905
    @alexg3905 Месяц назад

    THANK YOU SO MUCH! Yes, those caps are on purpose!

  • @J.Severin
    @J.Severin 3 месяца назад

    wow, what a great video. short and on point. thank you, good job.

  • @richiepyke1380
    @richiepyke1380 Год назад +1

    Nick is the GOAT of Inkscape

  • @mmmmmm2979
    @mmmmmm2979 Год назад

    Thank you so much Nick, this is the video that i was waiting for

  • @onepercentile
    @onepercentile Год назад +1

    Great howto Nick. I'm not sure I'd have a use for putting text outside top and inside bottom of a circle unless the bottom circle was made larger and would be on two different paths. Both would be outside, or both would be inside, no? It seems I read some howto somewhere about Inkscape having controls for the text alignments and offsets from path, but I've forgotten how I did it previously. Maybe it was a dialog help, but the acrobatics involved with putting text on path is a load of guess-work and seems rather a hack than an official approach. I guess they say, "If you don't use it you lose it." Finding information in any official Inkscape manual is a whole other chore unlike Krita unfortunately. I'd love to have an offline PDF manual for the up2date Inkscape tools and even better if it came loaded with the program at install. Nonetheless your videos are an inspiration to achieving more with Inkscape. Cheers.

  • @Beyond_the_drift
    @Beyond_the_drift 3 месяца назад +3

    So when you delete the circle though, the path disappears and the text straightens out, how do you go about fixing that?

    • @FIRNVS
      @FIRNVS Месяц назад

      Have u figure it out?

  • @8bitevolushroom312
    @8bitevolushroom312 Год назад

    Thanks very much friends for all video tutorials very helpful. Cheers

  • @Inkscape-tutorial-pl
    @Inkscape-tutorial-pl Год назад

    Clever, really clever and simple! Thanks Nick.

  • @StephenBoyd21
    @StephenBoyd21 Год назад

    Brilliant tip Nick.

  • @milicamaksic4414
    @milicamaksic4414 10 месяцев назад

    You're amazing Nick!

  • @gloriouschoices
    @gloriouschoices Год назад +1

    Could you hold "shift" as you rotate to jump every 45°. I just saw this. Super awesome. Not near my inkscape to test.

  • @cloud-forge
    @cloud-forge Год назад

    Great one ! Thanks a lot Nick

  • @laracoa
    @laracoa 10 месяцев назад

    Awesome, this was extremely helpful! Thank you!

  • @rlocatellidigital
    @rlocatellidigital 28 дней назад

    Wonderful! Thanks!

  • @brad5015
    @brad5015 Год назад

    Thank you Nick!

  • @CTRL_SMarcos
    @CTRL_SMarcos Год назад

    Nice tip, thanks for the video. One thing, you wouldn't need to select all the text, would you? Just having the text tool active would make its properties work. Always thinking about saving mouse clicks 🙂

  • @THAILANDCANUCK
    @THAILANDCANUCK 11 месяцев назад +1

    Very good info, but how can you get the text on the outside of the circle on the bottom?

  • @thewalkingjuju
    @thewalkingjuju Год назад

    I found a quicker way!
    *Make your Circle, and select it* (My button is set to F1, for Selection Tool)
    *Ctrl+Shift+c* - convert selection to object (Path)
    *Ctrl+]* - Rotate selection 90°
    *Put text on path* (My Text is set to Centered by default, but I tested it, and it still bugs slightly off center, in some cases)
    *Fine tune, because of Centered Text Bug!* 👀

  • @UXDlozi
    @UXDlozi 6 месяцев назад

    You have a new subscriber! Love your work!❤

  • @el2themeck
    @el2themeck Год назад

    Amazing thanks Nick

  • @mudasirhussainbhat6157
    @mudasirhussainbhat6157 Год назад

    Hi , I have learnt lot from your videos . I was wondering that if Mailmerge like feature is available in Inkscape for windows version , there is plugin for Linux based version but doesn’t for windows or any workaround for the same .

  • @alidapretorius5890
    @alidapretorius5890 9 месяцев назад

    Perfect! Thank you!

  • @FolklorCaduco
    @FolklorCaduco Год назад +1

    Nice. What about paths tho? I've tried the 'Pattern along path' effect, but it looks very distorted.

  • @bobbylewis2006
    @bobbylewis2006 Год назад

    Great tutorial

  • @margaretball8835
    @margaretball8835 4 месяца назад

    Thank you!😊

  • @Reinavera73
    @Reinavera73 Год назад

    Gracias Nick.

  • @danober4624
    @danober4624 Год назад

    Nick, your videos are amazingly helpful! Thanks. Are you able to convert text to Hershey text if it's on a path? It's not working for me.

  • @GraphicDesignStudio
    @GraphicDesignStudio Год назад

    This is so nice tips.

  • @el2themeck
    @el2themeck Год назад

    Let's go this is the bane of my inkscape existence

  • @greasyfingergarage
    @greasyfingergarage Год назад

    Well. That certainly would have saved me tons of time in the past.

  • @International72521
    @International72521 Год назад +8

    When text is on the top, it places the text outside the circle. When text is on the bottom, it's on the inside of the circle.

    • @doctormo
      @doctormo Год назад

      The text baseline is always at the bottom of the text. There's no way (yet) to have the text hang off the top.

  • @HoundDogHats
    @HoundDogHats 11 месяцев назад

    Thank you for this.

  • @olymoon2008
    @olymoon2008 10 месяцев назад

    Thank you for the explanation, but when I select the text and click on 90 degree rotate, it just rotates on itself where it is, instead of moving to the top... Any tip to do it like you exactly, please?

  • @jasonethegreat
    @jasonethegreat 11 месяцев назад

    I love this channel.

  • @thierryleriche1196
    @thierryleriche1196 Год назад

    That will save so much time

  • @VelowomanAZ
    @VelowomanAZ Год назад +1

    You are the best...

  • @HelmetVanga
    @HelmetVanga 3 месяца назад

    This is a cool feature to be able to have a text rounded. Now, what if I get rid of the circle since I no longer want it or need it there?

  • @DETAILINGONCAR
    @DETAILINGONCAR 11 месяцев назад +1

    thanks sir

  • @felipecaian1
    @felipecaian1 4 месяца назад

    You saved me, Bro!!!!

  • @voyageruk2002
    @voyageruk2002 Год назад

    Nick I've watched nearly every video you've ever made, but you no longer make the more complex tutorials with multiple parts and gradients.
    Any chance you could make those logo videos you used to do back in the day?

    • @LogosByNick
      @LogosByNick  Год назад

      Yes, I've been wanting to do more of that. I'll hopefully have something for you soon.

  • @HrafnNordhri
    @HrafnNordhri Год назад

    When you flipped the circle the text when inside the circle boundary. How do we get this same text position on the outside like it was on the top?

  • @redguitar6062
    @redguitar6062 Год назад +1

    And along the outside of the circle when aligned to the bottom?

  • @sl5154
    @sl5154 2 месяца назад

    MAGIC!

  • @defeatcobra3193
    @defeatcobra3193 5 месяцев назад

    Is there a way to add additional text to the upper inside of the circle without undoing everything that is in this video?

  • @radionut4422
    @radionut4422 8 месяцев назад

    I am putting text on a circular path. Before putting onpath I am vertically stretching the text to make letters tall without changing their width. When I put them on the path they revert back to normal proportions. Other than trying to find a different Roman font that has tall letters, is there a way to do this?

  • @WhitbyStuff
    @WhitbyStuff Год назад

    Can you do this for a different shape?

  • @batchrocketproject4720
    @batchrocketproject4720 Год назад

    nice tip, thanks

  • @ironhandstudio6612
    @ironhandstudio6612 Год назад

    Nickscape, yes.

  • @qnsboromerch
    @qnsboromerch 10 месяцев назад

    How do you get the text both on the bottom and top line up together. When you flip the text to go to the bottom, it doesn’t line up with the top text. Thank you

  • @Jazmin303
    @Jazmin303 8 месяцев назад

    select all - test _ put on path (words in semi)

  • @CodlFaaic
    @CodlFaaic 3 месяца назад

    I want to place another text also on the top of the same circle. How to do it? Thank you.

  • @jetc4332
    @jetc4332 9 месяцев назад

    AWESOME!!

  • @stevensheldon9271
    @stevensheldon9271 17 дней назад

    How do I put text on the top and bottom of the circle, but both pieces of text being to the outside of the circle?

  • @lmaoroflcopter
    @lmaoroflcopter 6 месяцев назад

    Great so you still have to rotate the circle. Is there no way of specifying where along the path the text is applied? I wish to have text bottom and top of my circle, using this method I need two duplicated circles and map text to each path, then rotate them individually.

  • @jamiewatkins7623
    @jamiewatkins7623 2 месяца назад

    So, how do I get the top of text to align with the bottom outside of the circle?

  • @TarkynSharples2
    @TarkynSharples2 Год назад +3

    Good tutorial. However, Inkscape really needs some context sensitive options for putting text on paths. So much so, that I tend to switch to Affinity Designer for this functionality, even though I prefer Inkscape.
    That said, I'm grateful for all the hard work the Inkscape devs have put in thus far.

    • @doctormo
      @doctormo Год назад

      It's something that the developers want to add. And by developers, I mean me, it's something I want to add. I dislike our text on path tools, so clunky. Also flowed text, that needs to be fixed up too. It's just sitting behind a monstrous number of other things.

  • @jackkirby5287
    @jackkirby5287 Месяц назад

    When it's on the top, it's outside the circle. When it's on the bottom, it's inside the circle. Is there anyway to keep it outside the circle? Also, can I control the distance between the circle and the text?

  • @narciliocosta
    @narciliocosta Год назад

    Great!

  • @BaronB
    @BaronB Год назад

    what is selectors and css in Inkscape?

  • @sl5154
    @sl5154 2 месяца назад

    JUST MAGIC! THANK YOU. MY PROBLEM IS THAT I NEED TO PUT A TEXT ON AN ARC, LIKE A DOOR. REALLY HARD.

    • @sl5154
      @sl5154 2 месяца назад

      I just found your put a text on a heart video. Solved. Thank you again!

  • @biplabmandi2140
    @biplabmandi2140 Год назад +1

    How to put text in wave line path in inkscape ? Please.

  • @stevensheldon9271
    @stevensheldon9271 17 дней назад

    Unfortunately this does not seem to work for me. I have selected the text and centered it, but when I place it on the path, it still goes to a random position on the circle.

  • @vincebaker3384
    @vincebaker3384 Год назад +1

    how do I make the text at the bottom of the circle be on the outside of the circle like the text at the top?

    • @elsonfernand
      @elsonfernand Год назад +3

      Just do the final trick of the video and increase de size of the circle.

    • @davescustommakes
      @davescustommakes Год назад +2

      Duplicate the circle, select the duplicated circle and move it a little so you can tell them apart. Select the original circle and press CTRL+Z to undo the move. Your selection will stay on the original circle. Then hold CTRL and Shift and drag out from a corner until the top of the text is aligned with the bottom of the duplicated circle.

  • @teddy2271
    @teddy2271 Год назад

    Thank u thank u thank u

  • @shaunhable
    @shaunhable 7 месяцев назад

    How does one control if the text is INSIDE the circle or on the OUTSIDE of the circle?

  • @iam_abdullah2
    @iam_abdullah2 Год назад

    I'm having trouble exporting my logo as a stack of PNGs so i can animate them in other software. Is there any possible way?

    • @LogosByNick
      @LogosByNick  Год назад

      Have you tried using the Batch Export setting in the Export menu?

  • @99loops
    @99loops Год назад

    My 'fill' has become two boxes instead of one and it no longer fills with colour. One side is chequered. I haven't knowingly changed any settings and I'm stumped. Appreciate any suggestions from fellow Inkscape users!

  • @sorenfranson3323
    @sorenfranson3323 Год назад

    Is it just me or did Nick's voice rise a little right about the, "rotate 90-degrees"? I was totally expecting a VICTORIOUS ROAR, "I HAVE CONQUERED THE CENTER!!!"
    Because that's how this video makes me feel. 👍

  • @harryrabin4841
    @harryrabin4841 Год назад +2

    How come when you placed the text at the bottom of the circle, it also went inside the circle.

  • @doktorbalaban
    @doktorbalaban Год назад +1

    🎉

  • @NaviaDaddyIssuee
    @NaviaDaddyIssuee 8 месяцев назад

    What if you want to have two text? one one but one at top one at bottom

  • @jpt3640
    @jpt3640 Месяц назад

    So, how can I put text on the bottom so it is not backwards?

  • @dennyskerb4992
    @dennyskerb4992 Год назад +1

    👍👍

  • @marceloribeirosimoes8959
    @marceloribeirosimoes8959 8 дней назад

    I'm trying to make this same thing around an oval path.
    ...man, it's just a mess...

  • @GHILLIESARCADEANDMORE
    @GHILLIESARCADEANDMORE Год назад

    Cool

  • @MapleStDesigns12
    @MapleStDesigns12 9 месяцев назад

    Any idea at all why mine will not center? It's off just a bit, kinda odd

  • @juliemc5528
    @juliemc5528 3 месяца назад

    HOW DO I GET RID OF THE CIRCLE THOUGH AFTER IVE CURVED MY DESIGN? THEY STICK TOGETHER NOW

  • @michaelfrisch5963
    @michaelfrisch5963 Год назад

    somtimes i ask me, when i have transfer grafik to path.

  • @michelkotoff-rizzo3112
    @michelkotoff-rizzo3112 Год назад

    Why doesn't the the put on path button do anything for me?

    • @rupankarkarar7436
      @rupankarkarar7436 11 месяцев назад

      Same here for me😢😢😢
      Which version is this???

  • @6ch6ris6
    @6ch6ris6 5 дней назад

    the problem is on the top it places the text outside of the circle whereas on the bottom it places the text inside the circle. i want both to be outside 😢

  • @graphosxp
    @graphosxp Год назад

    💯👍