Very nice job. I can't believe the way some people beat on those tightening arms. If they need that much jaw pressure they probably need a bigger vise.
Nice green color. You left out a lot of details in the video. Vise turned out nice, but what's up with the hole in the middle of the anvil surface? Thanks for your effort with the video
DANG! It looks like the previous owner needed a bigger vice! Yes,needed a vice to fix my vice. This my 4th vice restoration video today. I guess that I'm hooked.
Should have welded on the handle collar so it's not so floppy. Although, I suppose that small diameter rod will act as a shear pin and will prevent anyone bending up the handle by over tightening in the future.
Looks like soviet vise. "Тисочки настольные ТУ 2-17-302-81" (Bench vise Technical conditions (ТУ) 2-17-302-81 is the name of this vise, i think. I've got very similar one.
You can use white vinegar with sodium bicarbote solution. Inmerse the metal for 2 to 3 days in the solution and will be clean. No need of electricity. There is a videa on that system. Look for VINEGAR...
Совершенно варварский способ восстановления тисков. У меня подобные тиски. И они также нуждаются в реставрации. И вы посказали мне как не надо делать. Поэтому лайк!!!
Братан, BL, ну почему ты красишь детали без грунтовки, какой видос уже смотрю, нигде грунтовку при покраске не используешь, она же за быстрое время слезет, но если у тебя краска вместе с орутновкрй, то не отвечай на комментарий, а просто лайкни) удачи, молодец!
I often see these videos and wonder why many of the restorers choose not to use a primer before putting on a color coat. I always watched my dad prime parts that were going to later receive paint. Just curious.
Кто как хочет так и..... .делает. от ржавчины почистил и будя. Хотя наверно чем в такую каковы иструмент превратил (впереди,ы остановились без напряга . Все в ржавчине будто специально в химии держал. Покраска фигня, но почему резьбы и трущиеся поверхности не смазал ??? Смазки нет? Ну и использовать губки больших токов в качестве наковальни - функции.
Super tare 👍👍👍👍💡
Nice job using only basic hand tool. Very well done. I salute you, sir.
Ache kosis ki hay
NICE JOB !
To disfigure the screw lever in such a way, someone really hated this small vice. It’s good that the vice got your good hands.
Well done job.
Fantastic just fantastic stay safe and make
C O O L !!!
You removed old wounds and ... left new ones :( I only give you four stars!
Nice tear down and clean up. Beautiful restoration.
you did a wonderful job on it i would recommend using a washer or circlip as a thrust bearing to tighten up the backlash from the handle
Total Thumbs Up ! Beautiful piece of work !
That came out really nice. Thank you for saving it
Next time make a restoration of your drill ; ) Nice Job.
Great work on the "baby"!
Very nice job. I can't believe the way some people beat on those tightening arms. If they need that much jaw pressure they probably need a bigger vise.
You did a great job!
Para mini yunque, eres muy rústico.
Esta pieza era para que quedara con una joya.
Persevera porque o te faltan herramientas o eres rústico.
bahut aala kam
Nicely done.
well done , you really have a great feel for this kind of thing
Hi bro 👋👋👋very good restoration mini vise 👍👍👍
I love vintage tools I subscribed your channel.
Very good !!!!
კარგი ვიდეოა ყოჩაღ
очень хорошие тиски с меня такие есть .
Nice little video. I could use one like that. Looks really great. Nice work! 👍
Nice green color. You left out a lot of details in the video. Vise turned out nice, but what's up with the hole in the middle of the anvil surface? Thanks for your effort with the video
👏👏👏👍👍👍
Удачно!!!
you need some soft vice jaws so you don't destroy every thing you put in it
gostaria de saber que pó e este que vc usa para tirar a ferrugem e quantos e ligado está energia.?
What a nastily made vice that is...
Good
DANG! It looks like the previous owner needed a bigger vice! Yes,needed a vice to fix my vice.
This my 4th vice restoration video today. I guess that I'm hooked.
Should have welded on the handle collar so it's not so floppy. Although, I suppose that small diameter rod will act as a shear pin and will prevent anyone bending up the handle by over tightening in the future.
Looks like soviet vise. "Тисочки настольные ТУ 2-17-302-81" (Bench vise Technical conditions (ТУ) 2-17-302-81 is the name of this vise, i think. I've got very similar one.
What chemicals and ratios did you use in the solution to dissolve the rust?
You can use white vinegar with sodium bicarbote solution. Inmerse the metal for 2 to 3 days in the solution and will be clean. No need of electricity. There is a videa on that system. Look for VINEGAR...
Lovely vice, nice job.
What was the liquid? What was the powder?
I could really use that at work or at home. Want to sell it?
No grease? Is it just me or did I see no grease or oil on this whole restoration. Can't forget that! Besides that you did a good job
A vice holding a vice. Imagine that.... haha
Great job
Just found your channel. Subscribed and notified
Should've used a split pin instead of a bolt for guide pin - stronger and smoother
Совершенно варварский способ восстановления тисков. У меня подобные тиски. И они также нуждаются в реставрации. И вы посказали мне как не надо делать. Поэтому лайк!!!
Как вообще ума хватило зажимать за направляющую, даже без резины или тряпки?
Восстановил такие же тисочки, кому интересно ruclips.net/video/80aLYR2x-LQ/видео.html
Seen so many of these "restoration" videos and they rarely if ever use primer.
Ohh Man!
You should have replaced those t handles. They have been weakened by bending them they will bend again
Get a glass bead blaster no more crappy mess and waiting for results .
სად ნახულობ ამეებს? ??
У меня такие есть
Сделано в СССР, цена 3 р. 50 коп. :-D.
Восстановление только для декоративного предмета, как инструмент не годится уже.
That is the smallest vise I’ve ever seen!
How much i want it lol
Братан, BL, ну почему ты красишь детали без грунтовки, какой видос уже смотрю, нигде грунтовку при покраске не используешь, она же за быстрое время слезет, но если у тебя краска вместе с орутновкрй, то не отвечай на комментарий, а просто лайкни) удачи, молодец!
Is this famous russian technical culture XD!
I often see these videos and wonder why many of the restorers choose not to use a primer before putting on a color coat. I always watched my dad prime parts that were going to later receive paint. Just curious.
У
меня такие же есть достались от деда
Саша Масензовас .какого года?
No olvide restaurar su taladro
Наверное это то когда лучше б сгнили чем такой ремонт.
Great restore. Excellent process. But, uh... 4 commercials? Didn't know you had become so... capitalist?
Nice repair but wouldn't call it a restoration.
That is NOT how to use a file.
Quedo mas aguado que mis calzones.... disculpa no te esforzaste....
Кто как хочет так и..... .делает. от ржавчины почистил и будя. Хотя наверно чем в такую каковы иструмент превратил (впереди,ы остановились без напряга . Все в ржавчине будто специально в химии держал. Покраска фигня, но почему резьбы и трущиеся поверхности не смазал ??? Смазки нет? Ну и использовать губки больших токов в качестве наковальни - функции.
Imediaa male dagifasdeba ucxoetshi aset kontentebs milionobit naxva aqvs
Восстановил такие же тисочки, кому интересно, same type of vise restoration ruclips.net/video/80aLYR2x-LQ/видео.html
if you do, then do it normally. not a good job.
Your file work needs to be a little bit better.
Тиски тисками испортил. Причем со всех сторон.
Very sloppy work.
Хрень на воротил...... У меня такие же тисочки есть, скоро тоже буду снимать рестоврацию. Но более лучше!
Некрасивая и небрежная работа, впрочем как и все, уже просмотренные работы! Может быть дальше будет интереснее.