I only found out about that feature a few months ago while watching QVC, for years we had the shark propped in a corner, this is an extremely helpful piece of advice
I inherited one and my mom never knew about this. I've had it about 3 years and was searching for a bracket to hold it up and found your video. You just saved me $12! Thank you!
They will stand up right if you stand against the wall. The rubber behind it sticks to the wall. I never lay mine down it's always up against the wall after use.
I was a little skeptical about that but it worked great even on a slippery hardwood floor. On a carpeted floor it would be even better! Thanks so much for sharing that. :)
Some folks obviously need help putting two and two together. That protruding hook had to be there for a reason since it does nothing to enhance the vacuums ability to reach under low objects like beds.
This really works, thank you. I thought the accessories hooked on there somehow. I do wish they would put something on the stick, at least for the corner piece.
WOW WOW WOW!!! Who knew, not me 😂 Ive had mine proped up in the "upstairs" of my 5th wheel for over a year taunting me every time I look at it 🤣 This is fantastic. One less thing to tick me off when rolling down the road 👏 Thanks!!
Thank you! Hubby mounted the hanging hook in the closet but this will allow me to park the vacuum during pauses in use! Do you know if I can remove the cup on this model to give it a wash? 🎉 Thanks again for the tip!
That’s interesting, thanks for sharing that. My Shark rocket has a hook that attaches to the wall and it hangs on the wall which is really nice but yeah, while using it good luck, setting it down to answer the phone or to pick something up off the floor😂 it’s the main complaint about this particular model
Mine came with a wall mount so you could hang from that hook in the back. I guess if u didn’t get that hook you could also store it that way. How convenient
Do you happen to know how I can properly clean the canister? It is built with a style of screw that I don’t have screwdrivers for and am unable to take the canister off. I clean the filters but the canister has nooks and cranny’s that I am unable to clean properly.
Can u do a video on when it's starts making like a clogged sucking sound. Cleaned filters I think ok and installed back and still does it. I had another that didn't the same thing. Get warm to hot on the back near where my hand goes. Any ideas of where to check for anything? Thanks so much
Check the nozzle first. Separate the wand from the nozzle and look down into the neck for clogs. Then look through the wand itself. Finally check the screen filter inside the dirt cup.
Holy shit thank you, I was using it today for the first time, and didn't know how to put it back together lol, my wife would of kill me if I left her vacuum all messy lol, thank you
Thank you for sharing, that was driving me crazy so much that I really wanted to send it back because of that. I would have to lean it up against the corner.
I have had this vacuum cleaner for eight years and I love it except for that it’s like a drunken sailor always falling over thank God for RUclips and you !! Now can you tell me why my power brushes aren’t moving
Not unless I can diagnose it myself. Possibly a stuck micro switch. But I’ve also seen the boards in the main vac fail causing the brushes not to turn.
I only found out about that feature a few months ago while watching QVC, for years we had the shark propped in a corner, this is an extremely helpful piece of advice
I inherited one and my mom never knew about this. I've had it about 3 years and was searching for a bracket to hold it up and found your video. You just saved me $12! Thank you!
They will stand up right if you stand against the wall. The rubber behind it sticks to the wall. I never lay mine down it's always up against the wall after use.
👍🏼
I was a little skeptical about that but it worked great even on a slippery hardwood floor. On a carpeted floor it would be even better! Thanks so much for sharing that. :)
Thank you! Where does everyone put the smaller pieces??
Some folks obviously need help putting two and two together. That protruding hook had to be there for a reason since it does nothing to enhance the vacuums ability to reach under low objects like beds.
👍🏼
QVC did not show this feature back in 2014. Thank you so much I might just now begin to like the best vacuum I have ever had.
Exactly what I needed to see. Thanks 👍🏼
This really works, thank you. I thought the accessories hooked on there somehow. I do wish they would put something on the stick, at least for the corner piece.
Thank you! So great to know! Love this vacuum!
Not all heroes wear capes 🦸♂️
😂😂 👊🏼
WOW WOW WOW!!! Who knew, not me 😂 Ive had mine proped up in the "upstairs" of my 5th wheel for over a year taunting me every time I look at it 🤣 This is fantastic. One less thing to tick me off when rolling down the road 👏 Thanks!!
I thought the same thing. These little tricks can really make your day.
Omg I’m so glad I found your video! Thank you! ☺️
Thank you! Hubby mounted the hanging hook in the closet but this will allow me to park the vacuum during pauses in use! Do you know if I can remove the cup on this model to give it a wash? 🎉 Thanks again for the tip!
No not without tools
@@richardsvacuumcenter Thanks so much Richard! Much appreciated!
I didn't know that!!! They also come with a mounting bracket to screw to the wall to hang the whole unit in the same manner.
Perfect! Stopped me from returning this so thank you
That’s interesting, thanks for sharing that. My Shark rocket has a hook that attaches to the wall and it hangs on the wall which is really nice but yeah, while using it good luck, setting it down to answer the phone or to pick something up off the floor😂 it’s the main complaint about this particular model
Mine came with a wall mount so you could hang from that hook in the back. I guess if u didn’t get that hook you could also store it that way. How convenient
Why can’t I find a nozzle replacement hose for the HV 305 model🤦♀️
Not sure.
Do you happen to know how I can properly clean the canister? It is built with a style of screw that I don’t have screwdrivers for and am unable to take the canister off. I clean the filters but the canister has nooks and cranny’s that I am unable to clean properly.
Can u do a video on when it's starts making like a clogged sucking sound. Cleaned filters I think ok and installed back and still does it. I had another that didn't the same thing. Get warm to hot on the back near where my hand goes. Any ideas of where to check for anything? Thanks so much
Check the nozzle first. Separate the wand from the nozzle and look down into the neck for clogs. Then look through the wand itself. Finally check the screen filter inside the dirt cup.
I just mounted the bracket that came with the sweeper on the wall. it just hangs there out of the way and I don't have to take it apart.
That's fantastic - thank you!!!
What about storage for the upholstery brush and crevice tool?
Not sure. 🤷🏼♂️
So, so helpful. Thank you!
thanks that is fantastic tip!!!! my canister cover came off and I cant get it back on ???
Very helpful, thank you!
Great tip! I saw the clip on the back and thought how stupid to put a clip on it so I could hang the top on a wall hook. 😅 Thanks for your video.
Its in the owners guide. I just bought one today from Sams Club.
Holy shit thank you, I was using it today for the first time, and didn't know how to put it back together lol, my wife would of kill me if I left her vacuum all messy lol, thank you
Thank you for sharing, that was driving me crazy so much that I really wanted to send it back because of that. I would have to lean it up against the corner.
I’m having trouble opening the storage hook.
I just purchased it.
?
Thanks for this!!
Wow who knew? Thanks for solving a frustrating problem.
Helpful!!! Thx
A good reminder
I can't open the dust cup?
Sweet good to know I just bought one thank you for that info.
Cool. Thanks!
Thank you sooooo much!!!
Thanks so much😊
Thanks!!
Thank you! Since my rocket came with NO instructions!
Helpful! Thanks
Thank You.
Thank you!
I knew about it because I read instructions where it shows you lol
Just finding this out after having mine for nine years.
I have had this vacuum cleaner for eight years and I love it except for that it’s like a drunken sailor always falling over thank God for RUclips and you !! Now can you tell me why my power brushes aren’t moving
Not unless I can diagnose it myself. Possibly a stuck micro switch. But I’ve also seen the boards in the main vac fail causing the brushes not to turn.
I need a rear filter cover no where to be found
Did you check eBay?
Yes but they won't ship it to Canada lol
Thank you I never knew that
I don’t know you, but I love you. Thanks for this video
Lol thanks
The cord looks like it did not take this storage hook into consideration...still better than nothing. Thanks.
Correction, just tried it and works great and cord was perfect length.
I have the apex model and I put it on the hook before winding up the cord.
This is clearly listed on the simple 1-page Quick Start Guide. No one bothers to read anymore.
Nice
Wow thats cool will try it BTW i
Got the vacuum from goodwill dumpster 😀😀😀
Thanks!
thanks!
Thank you! No, I did not know that.
Get out of town 😆 I've been using my shark for 5+ years and didn't know this😂
thanks but tiktok tought me it could be 5s video
lol 🤷🏼♂️ I’m not one for brevity 😂
THANK YOUUUU
Very cool!
NO ONE knows about. Well at least ONE person must have known because now 30,000 people now😂😂😂
Hahaha
I knew about it, so your title is actually wrong.
lol
Son of bit… I never knew
Whut? No way! I never knew...........
👍🏾