Sony BVM D9H5U Repair & Review
HTML-код
- Опубликовано: 1 окт 2024
- This video is a demo of a Sony BVM Trinitron CRT. This monitor is a BVM D9H5U. The monitor has over 25,000 hours on it and needs to be cleaned, repaired and calibrated. Thanks for watching.
For more info on repairs, advice or support please visit: / retrotechusa
CRT Repair!
#futureproof #sonybvm #bvm #retrogaming #scanlines #classicgaming
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Sorry everyone. I managed to move the wrong screen a bit in the first half of the video. I hope it's not too distracting. I'll do better next time. Thanks!
Hey Man, take care about the "Wanna be friends" message from Logan's account down here, its a some kind of hack or virus, search info about it . By the way, nice video, really nice BVM
In a recent vid you mentioned hard time finding isopropyl alcohol. May want to check out CRC QD Electronic Cleaner. Its an alcohol based spray cleaner I've had excellent results with in the last few days. I drenched a fillthy sega genesis motherboard with it (after it sat unelectrified for several days) while simultaneously gently scrubbing with a toothbrush and it also brought a logitech wireless keyboard back from the dead someone left batteries corrode inside of. drenched it so much the cleaner came out of the keys. hit it with a hair dryer to be sure it was dry but again, fired right up. Stuff is magic.
Love your videos. You’re my go to for PVM content. I just picked up another PVM But I have a question for you if you could help. When I hook my Atari jaguar up to it, using BNC adapters via composite from the Jaguar, it automatically runs at 480i...Why wouldn’t it run in 240p? It’s a Sony PVM-14L2
14:20
The sync issues are unfortunately from the 129x board. Maybe in the custom ones people are making now will solve it eventually.
The sync regeneration in a GscartSW, will take care of sync issues.
That's VER rental stock... that sucker lived a tough life.
Hey Steeve,
Commented a while back on another video about the BVM-1910 I purchased locally. I can't find any information or manuals on the monitor. Is there somewhere you reccomend looking?
Also I am getting an issue with the screen rolling upwards. I think in one of your videos you said this was due to which khz setting it was on but I can not find a switch on the unit to change this.
I have this BVM, it's my only PVM and it feeds it's output to my 36 inch Trinitron, it's amazing but I've been dying to get a 4:3 mask for it, I have to take the bezel off to use it, I just leave it on top of the monitor. It has under 5000 hours the only problem is its a bit far from where I sit. I like it's sharp small scanlines.
What's the advantage of the 4:3 mask? I'm scratching my head here trying to figure it out.
The 4:3 mask allows you to see the entire screen without showing any of the electronics around it, the 16:9 mask cuts off part of the screen and is used to hide the retrace lines.
@@harrisontashjian752 If you're into 3D Printing someone made a custom mask that can replace the 16:9 insert if you're willing to cut it out.
i bought from the same guy, shipped in the same box.
How did the shipping go to France?
Just a quick question, which pvms that are about 8 inchs have speakers on them? Also what kind of audio cable do I have to use for it? Is there a way to plug a stereo audio?
WOW! Loving your works as usual Steve. I like this unit with the stand on it. My Sony unit that I had once had the same feature like this one bro. 8^)
Anthony..
Hey, I have a ibm pcjr color display that I found at my grandparents house and I’m too much of an enthusiast to let it get thrown away. All I have is the display. Are there any adapters available to use newer PCs with it?
Tech Tangents actually did a good video about fixing plastic gaps with powder and super glue.
the battery is V-Mount
do all of these have sync issues? So what would be the best small 8 or 9" BVM for retro gaming?
excuse me could you personally help via online to solve a problem of convergence and purity of a pvm regards
are you going to put one of those d24's up on ebay for auction? that would be amazing
I think I've never seen that 4:3 bezel on the D9 before. Great video as always, thanks :)
I wouldn't mind the HD-SDI card for my D14-H5A
FYI, many of the small monitors of this era were able to be powered by a battery pack like this for field usage. You can still buy batteries that could power this, they are the same that power many of the large broadcast cameras used by 3 chip 12 volt news cameras and the like. This mount is called "V-Mount" and the batteries can be found on B&H or even Amazon... but they are not cheap.
It's kind of legit because you're exactly right. A lot of modern V-Mounts have USB ports now too for various on-camera accessories etc. You could power a Raspberry Pi and the BVM off one of those.
The ending of the video on top of being a great wrap up really hit home how awesome of a resource this channel is. Congratulations on 2 years!
This was great to watch and thanks for the suggestion of use of JB weld for clean breaks.
happy 2 year dude! can't wait to get my hands on one of the D24s!!
Yeah pretty cool BVm just 9” of awesomeness
Thank you Retro Tech!
I would easily pay $5000 for one of these
I've got one I'll sell you then lol
@@UNOxDExELLOS lol