BMW iDrive Switch Repair - Knopf reparieren
HTML-код
- Опубликовано: 6 сен 2024
- BMW iDrive Rotary Switch Repair
Knopf reparieren
Music by Eric Matyas
"Dance of the Satellites"
"Network"
"Techno Dreaming"
"Electric Rain"
www.soundimage.org
Knopf reparieren
If your iDrive is working after seeing this video and if you want to send me a "virtual beer" you can do it from here: www.paypal.me/TechTronic9000 or you can at least you can subscribe to my channel.
Hi. You,ré video helps me so much. I fix my idrive in e87 thanks toi it. Thanks you, i send you a papal beer 😉
Funciona perfectamente..!!!!. Muchas gracias, eres un crack, me he ahorrado 500 € que me pedían en el concesionario BMW por poner el iDrive nuevo + la mano de obra. Eternamente agradecido. Un saludo desde Barcelona.
another happy user :D
@@TechTronic9000 hi, my idrive works but the only thing is the button when I click down to choose any option doesn't work, when I go left righ or twist the main button works, so I dont know if you could tell me what I could do please??
Thanks so much, I've been having this issue over couple month on my 2008 e70 x5 and BMW quoted $600 for replacement/ repair. Did this fix in no time, took me about 15 minutes totally. Now switch works perfectly. You saved me so much $$$. Sending you case of "Virtual beer" man! Vielen Dank!
I'm glad to read that. Please consider subscribing as support for my channel.
followed this video and the select button on my 2008 E91 Idrive now works as it should, thanks saved me a small fortune for a new part
+Brian Hurd Thanks for letting me know and I'm glad that it's now fixed. Also feel free to share this video so that other people will benefit from it.
+Brian Hurd
To me as well. Ty TechTronic9000
+Andres L Great to know ! Thanks.
Hello thanks so much from Italy. My 2006 E91 Idrive central button stopped to work few weeks ago, now it's fully functional thanks to your tutorial
Great to hear!
Hi man I have a same issues in my car. I follow your instructions and it's work. Thank you so much. You save me and my money as well.
Glad to hear it
worked, i didn't use solder just touched the existing joints and it works perfectly now, thanks for saving me 300 dollars and a lot of headaches
Glad to hear that, be sure to like, subscribe or share to support me. You can also send a beer using this: www.paypal.com/paypalme/TechTronic9000 :)
Thanks! Do not forget to resolder the 4 pins of the main connector as well! this did my trick!
InYour Arse what main connector u mean?
Thank you very much for this helpful tutorial ! My iDrive works now !
You're welcome! Be sure to at least subscribe as support :)
Thanks! This worked great for me, followed same steps, and now I have a working center button.
I'm glad to hear that, be sure to subscribe, share and like the video as it will go a long way in supporting my small RUclips Channel.
And one more time: Thank you a thousand times. The video saved me lots of time and money!
I'm glad it was useful to you, be sure to subscribe and share to support me :)
Thanks for the video, I just did mine it took me 40 min approximately, for the complete process. Works like a charm.
I'm glad to hear that !
I tried for my E87. It's work. Thank you so much !
Another happy "customer"! Thanks for watching!
Hello, I just done this tonight and now works like a charm. I did knock a small component off in the tighter area but managed to get it back on. Works sweet saved me $400 @bmw
Another success story , thanks !
Thanks! It worked, saved me 150 euros for a used one! ❤❤❤
Thanks. I don't know how, but it worked. How awesome. Now I have full control over my car🖲
Tried on my E81, that the iDrive is slightly different but the PCB similar and it's working again. Aswell re welded the 4pind that are out of the main conector on the other side.
Thank's mate!
Thanks for the info and for watching! Don't forget to subscribe as support, it means a lot for me.
Merci beaucoup pour ce tuto efficace et bien ciblé sur la panne !!
Merci beaucoup d'avoir regardé ma vidéo
Another successful job on a switch took abit of time as i struggled with one close to that small resistor but at the end came out perfect thank you for sharing the video you saved me a fortune too cheers🥂
I'm glad to read that. I hope you have also subscribed as thanks ;)
thanks tech tronic will be trying this later in the week when the new soldering iron arrives.
Perfect, did it this morning, works great. Thanks for providing this great video!
Yey, another fixed one :) I've lost track of how many fixed it until now. Thanks for your comment.
Thank you very much. Worked perfectly. Super tutoriel pour réparer son idrive sur bmw e90. Avant il était impossible de cliquer. Pas très compliqué à faire, il faut juste le bon fer à souder car c'est petit.
I'm glad that I have saved another iDrive switch. Be sure to like, share & subscribe.
I really apreciate your video. I did it in 10 minutes and i fixed , thank u so much
Glad it helped
I did it and it worked...fantastic post! Thanks so much for posting!
Glad it helped!
Perfect. 👍🏼
How can I fix the bootloop problem at a Navi system, M-Ask2, E91 11/2008?
Thank you for the video!....It fixed the problem on my 2007 X5!.....I just cleaned after checking (magnifier glass) the contacts on it were still ok!!................................
UPDATE: after couple days same problem!....FIXED PERFORMING THE SOLDERING OF THE CONTACTS LIKE THE VIDEO EXPLAINS....cleaning only didn't fix it!....
Glad to hear that, another saved iDrive, be sure to like, share and subscribe to support me :)
J’ai pu résoudre mon problème merci beaucoup 👌
salut, c’est quoi le liquide qu’il utilise pour nettoyer ?
Une sorte de solvant tu peut utiliser de l’alcool à 90 ou alors le solvant que les femme utilise pour retirer le vernis des ongle
@@elchicko7822 super ! merci pour ta réponse et à réactivité !
Great, just soldered it and everything works now, thanks a lot!!
+Ray Sun Great ! That's why i did this video, it's a very common fault and BMW services will charge you an arm and a leg to replace the button itself.
Perfect! Worked for me 💪🏻
this worked for my e91 as well, good job
Good to hear
Worked great! Thanks a lot 💪
Great Job. You have save me and my Bmw.
See you again
+Massimo Trevisan I'm glad that i could help you fix it !
Amazing guide!!! Works beautifully.
Glad it helped!
Thanks, my iDrive button working again!
I'm glad that there is yet another happy iDrive user :)
Hey, I did this years ago but the solder joints have corroded and the pad for the capacitor fell off.
Is it possible to expose the traces to resolder the capacitor to the unit again?
It might pe possible, you need to trace them and use some wires to reconnect.
Thank you so much! Great video! Worked perfectly again!
Great to hear that, another one saved, be sure to like, share and subscribe, you can even use my PayPal.ME donate button if you want to send me a "virtual" beer :)
thank you very much...my idrive button works well again
Happy to hear that.
Thank you very much dude you’ve saved me £100 ⭐️⭐️⭐️⭐️⭐️
I'm glad to hear that, be sure to subscribe, share and like the video as it will go a long way in supporting my small RUclips Channel.
Good job ! It works 👍🏻 thank you
Works like a charm
Happy to see another one fixed !
Thanks. My iDrive button works again.
I'm glad that you have fixed it.
Thanks a lot, it is working again finally!!!!!!!!!!
You're welcome!
What was the liquid you used with the tooth brush after soldering and why did you use it
That is isopropyl alcohol, it's used to clean the flux from the circuit board as that can become corrosive as time passes.
i have just done it , spilled a bit, but t worked great very good,
by the way do you know which type of gas i need to put in the airco.. of this car???
thx for your video
+Raj Hardo Sorry I don't know what to use for air conditioning, but be sure also to check the compressor oil (type and quantity) as it's very important.
Ok thank you. , where do i check the compressor oil?
It's done by a machine found on AC repair shops.
Thank you, it worked, saved me money
+wayne chapple I'm glad, thanks for your feedback.
Thank you so much works great save me time and money 👍👍👍
With pleasure, happy to save another one. Be sure to subscribe, like & share.
I have an issue. The external port for an ipod seems locked on the screen and I cannot get the radio or CD player to switch on. When I soldered only three points got soldered as the last on did not take and just melts the circuit board so had to leave one point without solder . All works fine on the screen but only get the external ipod point to get music from the plug in point . Seems locked on that.. any suggestions, probably need a new circuit board as everything else is good. Where can I get a circuit board from , have looked on ebay nothing .
Send me a picture of your damaged board on my Facebook (techtronic9000) page and maybe I can give you a repair solution.
@@TechTronic9000 ok , will have to be end of week ..and thanks for the help , appreciated.
Thanks!! Worked for me as well.
I'm glad to hear that.
Thank you for your video. My iDrive switch Works in all directions but not the push down/select movement. I have done as you instructed in your video and I am in the same situation, wondering if you have another suggestion or if its time I buy the replacement part? I suppose the push down works with that part you show with the spring, should I try replacing that first and what is that part called .
+Jane Montoya You can try to do the same procedure to the two larger sensors also.
Ok thanks ,i will bring the Car to airco specialist,
i like your channel,greetings form surinam
+Raj Hardo OK, it will probably top the oil level with 20-25 ml to be on the safe side, just mention to them the oil type as it's very important. Some A/C shops use "universal" 100 oil instead of 46 or 150, this will damage the compressor.
Ok i wil l mention the oil
Specs. Again thanks very much ,for sharing your knowledge with us.
Raj Hardo
You're welcome !
TechTronic9000
i filled the airco with the gas my self the included a stopleak and the 46 oil
its cooiling super again...
thx
+Raj Hardo that's great news !
It worked! Thanks 😘
Happy to see another happy user 👍
Does the E90 and E70 use the same electronic board? Could I just buy an E90 idrive module and swap the internals into the E70 housing?
Sadly I don't know that.
Hey what did you use on the tooth brush
That is isopropilic alcohol to clean the flux residue from the board.
which wire did you use to lot?
Good quality solder wire from local electronics shop.
Like Andres I have the same issue E91 and the select function middle push is intermittent, hoping this works
+Brian Hurd The random middle push, or random rotary operation. Both are fixed by re soldering the sensors on the PCB. Let me know if it works.
+TechTronic9000 all working again thanks
+Brian Hurd Awesome !
Hello ! First of all great video and good quality ! I did exactly what you did and my switch is working but the middle button doesn't anymore.. I really have to slam the sh*t out of it so it will work.. Any suggestions or shall I buy an other one? (bmw e82 2008 120D). Thanks !
It might be a bad contact on the push switch, or maybe it needs a bit of cleaning.
Does the centre trim just pop out. I have the 2008 E90 model and don't want to be forceful especially if there are any screws. Thanks
Sorry but I have only received the board to fix it, don't know how to take it out.
Hi on the e92 yeah you just pull it and comes of. Start from the gear selector first
Thanks guys. Took a bit of force but once one clip released, the rest popped off easily. As for the Idrive itself, that was straight forward using a fine tipped soldering gun. Took a couple of mins, no more. End result is my idrive select is working again
yes it s works for me thanks a lot
+David Danna You are welcome !
What series is it from? What was the problem?
I have a problem with the push function, sometimes it works but sometimes doesnt. Might soldering help as well? (e90/318D/2006)
+Andres L Intermittent working, sometimes it work sometimes it didn't, it doesn't matter the series / model. It's the same problem to all the iDrive switches.
Does anyone know it tis would cure the fact that my system skips between different programs without being touched. You start car up and it will flick between volume control treble and radio. It also keeps wiping the time and stored trip mileage?
It's worth a try.
I did the same thing, but still not working, any other suggestions? thanks
Check the plugs, wires...
Works!
Thanks!!!🥳
You're welcome!
Bonjours, j'aimerais remplacer le tcpt1200 par un bouton poussoir, car j'ai le système a ressort en plastique qui n'est plus du tout présent. je l'ai cassé. Est-ce possible ?
Sorry i don't fully understand the modification that you want to do.
So is this the reason why my idrive spins on its own ? Any one can help
Could be a similar issue.
the gas type is r134a. juist found out. and oil #46.
but i did not found the oil level check.
+Raj Hardo 46 oil is low viscosity, take care when you refill the installation to use this exact specification. If you use 100 or 150 oil it will damage the compressor. Do you have a leak or blown hose ?
No i have not a blown hose and there is gas in the system ,of you push the valve ,gas escapes,i think its low in gas, Car was not used ,3 years.
nikel ca refonctionne aussi pour moi
+David Danna So it also works for you ? Then it's great !