FWIW... I felt bad I had to bother him mid day.. but Brian took my call, answered my questions in great detail. This guy is a pillar of his industry. Just wanted to show my appreciation. Thanks B.
Brian, thank you for always showing us the best ways to apply and remove all of the products you test. You are always transparent with all products, and never biased. I know you are one of the best details on RUclips. Thank you for sharing your knowledge and passion with us.
There are a few channels I would go to for product insights, Brian from Apex will continue to prove his value to this industry. The information he provides to his viewers is incredibly selfless, valuable and appreciated . You do an incredible job providing the ease of application process, gloss readings, product’s integrity via torture test , then based on your years of experience- a reflection. You give your viewers a non-biased opinion that helps us make a decision for ourselves. Keep showing new products so we can decipher whether or not the products are a marketing gimmick or practical for our applications. For those that don’t know, the Schaffer’s Citrol 266 used in the torture test, is one of the strongest tar removers available! Any product that can withstand that test is incredible. Keep the content coming Brian, you are great at what you do!
Thanks for the extensive review of all the graphene products Brian. The vette looks absolutely stunning as always, keep doing what you do and can’t wait for the next video.
Once again Brian, Really love your no bs approach and super descriptive explanations......could you do a quick video of gloss improvement as fully cured. Love from the uk 🇬🇧
Brian, I've got to say that you are a bit of a bloody legend really! You're running a busy detailing studio yet you still make time to do all of these videos for us all! Next time I'm flying to the States, I'm definitely going to try to visit your shop to say thank you in person mate. Big thanks and much love from the UK. Stay safe.
Hey Brian...if I were you I would go over to the rag companies channel and go to the video of their top list of detailers on RUclips...idk why but your not on their list...but I should see the love your getting in the comments 8 out of 10 comments are saying that u should have been apart of that list...YOU ARE TRULY THE DETAILERS DETAILER! Thank you for all you do!
Table Rock Mobile Detail hey I respect their opinion. I am not for everyone. Dealing in automotive finishes is a very small niche. The important fact is I have you guys as subs. What more could I ask for?!😁👍
What a fantastic product.it's hard to believe that I just put Opti coat pro plus on one of my car is 7 months ago and I put a high-dollar ceramic on the other one and now I see this one and I know I have to wait or there really isn't any other choice. But yes I really wish I could put it on. 😁
Very in depth video as always B!! ATS is definitely a pioneer in the new and soon to come "Graphene technology." Kudos to them... I'm sure that day will come when we all are going to be anticipating the debut of the new TW HSG (TurtleWax Hybrid Solutions Graphene) spray coating. 😁
morning my friend.....as usual the best channel on utube...put the qd concentrate on and appears to work well with the f4...after a lot of searching and researching....I came across migliore forte graphene....may give sps/artdeshine a run for its results....but it is 248.00/oz yet still impressive - the igl f4 and artdeshine qd is a combo tough to beat for cost in the graphene arena be well my friend
I was almost ready to buy an si02 coating then I saw this...amazing gloss and durability just a little pricey...I still might try it...oh what about using this on glass? thanks for the great info as always
Brian- would like to see you test the graphene coating after full curing to see how it responds to hard water that creates water spots on many Si02 based ceramic coatings. I have several customers that have complained about water spots after washing their ceramic coated cars using our municipal water which has lots of minerals in it. Most people don’t want to have to deal with learning how to use water spot removers.
Corvette looks great by itself. However, I myself found the product impressive I do agree with you. The second product was a little overkill for me. But hey to those who are interested buy it try it and satisfaction guaranteed !! 😬👍
Great video b, glad to see the Legend still at it. I definitely gaining more curiosity on graphene. What was the durability claims on this bottle? Keep up the perfection you continue to do day after day.
Hey Brian, as always, a great and very informative video. How would you compare this against Puris Jade quartz pro, IGL Kenzo and CQuartz Finest Professional in terms of gloss and durability? Or is it too early to comment?
Vette looks great 👍. I use those same towels for coatings, cheap but they work. I’m comfortable applying coatings but not sure about this one. Just a FYI for people tac systems USA website is back up.
Hey Brian! It's Cody I used to work next to you if you remember me. Didn't know you had a youtube! I've actually been thinking about calling you to get my Audi done! You did an excellent job on my Dad's truck.
Brian just a simple question, I used ArtDeShine graphene coating on my car and it came out awesome. Question is what do you use as an In-between/maintenance for it. Sort of like ceramic boost is used for a ceramic coating. The maintenance bottle for ArtDeShine seems to be a coating but much less concentrated. Thanks in advance.
They should stop adding those dripping caps in the bottles, it sure is funny to see you remove them everytime :) You also really tested this coating haha, it sure is chemical resistant!!! and next time we need to remove a coating, we take out a flamethrower :) But great video once again Brian!
Hey @ApexDetail, how do you think this compares to the Ethos Graphene product? You should definitely do a side-by-side comparison of the two, or include the new Adam's graphene...
@Apex Detail It figures that I just had my BMW coated with Opti-Coat Pro at my local authorized detailer. Kind of wishing I knew that all these graphene products would be coming out before I did that. That said, I still love my Opti-Coat so maybe in 5 or so years from now I'll get the graphene lol. Do you have any predictions about longevity of this compared to a good ceramic i.e.Opti-Coat? Thanks, just subscribed.
Looks a bit hard to work with for an enthusiast. Obviously puts out a great coating and shine. ALMOST 70K BABY! Cant wait to see the 100K plaque on your wall.
From the product spec sheet: Surface suitability: Gloss/matte clear coats on automotive body, vinyl wraps, paint protection film (PPF) wraps, acrylic parts, chrome/stainless steel/metal parts, gloss/matte plastic trims and fittings (Installing on glass windows and windshield will present application difficulties due to viscous state of product, may cause irregular wiper movement, durability not tested)
Nano, BX, Metal Oxide or Devils Blood/Typhoon? Which would you go with, or maybe something else? Another great video Brian, I was waiting for this one!
Have u seen any products from dura coating technology there out of Naples they have some cool products . I'm using some of there graphene product coating
It’s was pretty good until it went up against NV Nova Pro. I watched another video with this product, Car Craft Auto Detailing. It was intensive, but a good video. I don’t think this should be for the “do it yourselfers”, unless you’re the patient type of person.
You've been on a bit of a graphene kick here lately, Brian. While I appreciate the look it provides, price and durability are still a concern. Since I have other options, I'll stick with what I've got...but I do appreciate you showing various graphene options, even if I won't be using any anytime soon.
Is it supossed to put the leveler first as a ground coating and then use the Graphene ? i read on a detailshop use first leveler to decontain from the ipa cleaners and polish leftovers. you use the leveler as the last step ???
Stefaan Conrardy you can use it before or after. It re activates high spots so you can remove them if they are left behind a few hours. I still believe all you need is a damp towel to follow up. Save your money.
Feras Al-Hindi I am waiting to see if it is self healing when some of these cars come back. No water spot issues as of yet. I will keep you all posted.
You must be stripping the black vette, every few days, as it gets a lot of products and camera time. But it does look really good. Please let us know what's going on BRYAN. JP IN SD.
I have been begging someone to do a full review of the Proje Ceramic Coating... The only real reviews are from the company... Can you please do one on this product... It seems to be a decent product but I don't know... A professionals review should help.... I hope you read this and consider this product for your review
Hey Brian, have you ever considered test Flowgeneitcs products? I just saw an advert for it and the first thing I wondered was “I wonder if Brian has gotten ahold of this yet?” Anyways, stay safe and successful!
was on a television or tv site a video from America was wax or some liquid meant for a car and the one that shows it put the hood on fire wiped off and told and show even the hood on fire that liquid would with stand it. and mi respond was and is that is nonsense.just wonder how they do that .thank you have a nice weekend
Hi Brian I was wondering does this product your car decals or should they be removed also is this just for the paint or can you do your windows also Thanks
Hi brother, my self Anil from India . I was looking forward to start a detailing studio and I take artdeshine product sample , what is your opinion on this brand especially how is there ceramic & graphene products Am very much familiar with ceramic pro brand and there all products Can you give your feedback
not saying you used real paint thinners or goof off product, but the spray on citrus degreaser i believe after all the other tow good just be water? Try using prepsol, then we will see what happens?
Cesar Lebron sane thing as any other coating but you have to make sure you do every step in the video he shows on his channel without cutting corners. And absolutely nothing on the paint before applying
Does ArtDeShine have self healing properties. I saw a video of someone putting light scratches into the paint and removing them with a heat gun, similar to PPF. Is that another myth?
The coating is pretty expensive at 200$ also this application is not too user friendly. Is the durability and gloss better than the traditional SiO2 coating like carpro uk 3.0?
Question... I want to apply a coating to my UTV CanAm what would you recommend for the paint and all the plastic panels? I want to make it easier to clean and shine for years to come. Is Graphite an option? Thanks Wes
From the product spec sheet: Surface suitability: Gloss/matte clear coats on automotive body, vinyl wraps, paint protection film (PPF) wraps, acrylic parts, chrome/stainless steel/metal parts, gloss/matte plastic trims and fittings (Installing on glass windows and windshield will present application difficulties due to viscous state of product, may cause irregular wiper movement, durability not tested)
sps and artdeshine are both formulated by Alfred yow....one is consumer - the other is pro install only....basically same product by the same creator....maybe slightest diff in gram/30ml...hope this helps
FWIW... I felt bad I had to bother him mid day.. but Brian took my call, answered my questions in great detail. This guy is a pillar of his industry. Just wanted to show my appreciation. Thanks B.
Same goes for my messenger chat. Great person! Keep up the good work.
I try to help when I can.😊
Thanks again Brian for keeping us informed on the development of this new surface-coating chemistry.
Brian, thank you for always showing us the best ways to apply and remove all of the products you test. You are always transparent with all products, and never biased. I know you are one of the best details on RUclips. Thank you for sharing your knowledge and passion with us.
Scot Brown my pleasure! And thank you for your supportZ😁
There are a few channels I would go to for product insights, Brian from Apex will continue to prove his value to this industry. The information he provides to his viewers is incredibly selfless, valuable and appreciated . You do an incredible job providing the ease of application process, gloss readings, product’s integrity via torture test , then based on your years of experience- a reflection. You give your viewers a non-biased opinion that helps us make a decision for ourselves. Keep showing new products so we can decipher whether or not the products are a marketing gimmick or practical for our applications. For those that don’t know, the Schaffer’s Citrol 266 used in the torture test, is one of the strongest tar removers available! Any product that can withstand that test is incredible. Keep the content coming Brian, you are great at what you do!
Nick Summers I appreciate the support.. and will patiently keep an eye on these coatings for durability.
Nick Summers I appreciate the support.. and will patiently keep an eye on these coatings for durability.
Thanks for the extensive review of all the graphene products Brian. The vette looks absolutely stunning as always, keep doing what you do and can’t wait for the next video.
The eye drop is a great idea for the application
Once again Brian,
Really love your no bs approach and super descriptive explanations......could you do a quick video of gloss improvement as fully cured.
Love from the uk 🇬🇧
Every damn day new best coating lmao i love it this is fun to tune into everyday
Just awesome 👏🏾 work! You could shave from the reflections in that black paint. 🔥❤️
Brian, I've got to say that you are a bit of a bloody legend really!
You're running a busy detailing studio yet you still make time to do all of these videos for us all!
Next time I'm flying to the States, I'm definitely going to try to visit your shop to say thank you in person mate.
Big thanks and much love from the UK. Stay safe.
Ant El you are welcome anytime!😁
Hey Brian...if I were you I would go over to the rag companies channel and go to the video of their top list of detailers on RUclips...idk why but your not on their list...but I should see the love your getting in the comments 8 out of 10 comments are saying that u should have been apart of that list...YOU ARE TRULY THE DETAILERS DETAILER! Thank you for all you do!
Table Rock Mobile Detail hey I respect their opinion. I am not for everyone. Dealing in automotive finishes is a very small niche. The important fact is I have you guys as subs. What more could I ask for?!😁👍
Me and a colleague used this stuff today and the gloss is sooo amazing...more to come Graphene is the best
Incredible results as usual Brian you are master of your craft
Another awesome video. Thank You, Brain.
Thanks for your insightful advice and comments. Always learning and eager to start applying a new coating.
Xoxo from Puerto Rico 👍🇵🇷
Thanks Brian ... another great video!
Damn that C5 looks goooood!😀👌
All in all in the prep
What a fantastic product.it's hard to believe that I just put Opti coat pro plus on one of my car is 7 months ago and I put a high-dollar ceramic on the other one and now I see this one and I know I have to wait or there really isn't any other choice. But yes I really wish I could put it on. 😁
Very in depth video as always B!! ATS is definitely a pioneer in the new and soon to come "Graphene technology." Kudos to them... I'm sure that day will come when we all are going to be anticipating the debut of the new TW HSG (TurtleWax Hybrid Solutions Graphene) spray coating. 😁
Looking forward to follow up with longevity.
I can’t wait to install this on my next high end job
morning my friend.....as usual the best channel on utube...put the qd concentrate on and appears to work well with the f4...after a lot of searching and researching....I came across migliore forte graphene....may give sps/artdeshine a run for its results....but it is 248.00/oz yet still impressive - the igl f4 and artdeshine qd is a combo tough to beat for cost in the graphene arena
be well my friend
john keturoskey I agree... great combo.
Thanks for making videos like this one. Can I ask you a question? How do you maintain the coating and how often do you need to do it? Thanks advance!
once again great video and product review good friend. vette looks simply amazing. b well good friend
I was almost ready to buy an si02 coating then I saw this...amazing gloss and durability just a little pricey...I still might try it...oh what about using this on glass? thanks for the great info as always
Brian- would like to see you test the graphene coating after full curing to see how it responds to hard water that creates water spots on many Si02 based ceramic coatings. I have several customers that have complained about water spots after washing their ceramic coated cars using our municipal water which has lots of minerals in it. Most people don’t want to have to deal with learning how to use water spot removers.
I too am interested in seeing how this will hold up over time and it’s resistance to water spots.
No problems so far. But it is early. I need to be patient and keep an eye on these coatings.👍
@@apexdetail85 any updates?
Corvette looks great by itself. However, I myself found the product impressive I do agree with you. The second product was a little overkill for me. But hey to those who are interested buy it try it and satisfaction guaranteed !! 😬👍
Great video b, glad to see the Legend still at it. I definitely gaining more curiosity on graphene. What was the durability claims on this bottle? Keep up the perfection you continue to do day after day.
Hey Brian, as always, a great and very informative video. How would you compare this against Puris Jade quartz pro, IGL Kenzo and CQuartz Finest Professional in terms of gloss and durability? Or is it too early to comment?
Thanks Bryan. Looks like graphene it’s the future of coatings but it’s expensive right know
Vette looks great 👍. I use those same towels for coatings, cheap but they work. I’m comfortable applying coatings but not sure about this one. Just a FYI for people tac systems USA website is back up.
Chad J I saw that... but need to gain trust in whomever is running it now.
Apex Detail great point I don’t know who is running it now either.
I was just watching your windshield scratch removal video which I'm going to do myself next week! when i got the alert for a new video :)
Piglet6256 keep the heat down. If not too deep.. they will come out.🙂
Hey Brian! It's Cody I used to work next to you if you remember me. Didn't know you had a youtube! I've actually been thinking about calling you to get my Audi done! You did an excellent job on my Dad's truck.
cody haddix yes! Stop by anytime!😁
Brian just a simple question, I used ArtDeShine graphene coating on my car and it came out awesome. Question is what do you use as an In-between/maintenance for it. Sort of like ceramic boost is used for a ceramic coating. The maintenance bottle for ArtDeShine seems to be a coating but much less concentrated. Thanks in advance.
They should stop adding those dripping caps in the bottles, it sure is funny to see you remove them everytime :) You also really tested this coating haha, it sure is chemical resistant!!!
and next time we need to remove a coating, we take out a flamethrower :)
But great video once again Brian!
Piglet6256 😂🔥🔥
Hey @ApexDetail, how do you think this compares to the Ethos Graphene product?
You should definitely do a side-by-side comparison of the two, or include the new Adam's graphene...
Always a great video. What do you think is the best graphene coating on the market so far?
@Apex Detail It figures that I just had my BMW coated with Opti-Coat Pro at my local authorized detailer. Kind of wishing I knew that all these graphene products would be coming out before I did that. That said, I still love my Opti-Coat so maybe in 5 or so years from now I'll get the graphene lol. Do you have any predictions about longevity of this compared to a good ceramic i.e.Opti-Coat? Thanks, just subscribed.
I wonder how this will compare to Adam's Graphene Coating. The Adam's is alot cheap in Canada anyway
Do you recommend using the leveling solution first as a primer before applying the coating.
Have you tried the graphene coating from GlassParency? Pan the Organizer just did a video on it. It looks like It must be a less concentrated
Awesome!! I like that stuff 👍🏼👍🏼
Looks a bit hard to work with for an enthusiast. Obviously puts out a great coating and shine. ALMOST 70K BABY! Cant wait to see the 100K plaque on your wall.
Sandy Hill it is a bit tacky... patience it a virtue with this coating.😁
UV protection: Any chance this product would stop single stage "red paint" oxidation?
Hi, would it make a difference of the shining the car?
It would be helpful to have the links in the description link to the specific product. Thanks!
icurt06 everything is in alphabetical order... simply scroll down. I tried.. but each link just brings me to the main site.
Hey B... can we apply to trim and glass??? Makes the higher cost easier to swallow if we can do various surfaces
From the product spec sheet: Surface suitability: Gloss/matte clear coats on automotive body, vinyl wraps, paint protection film (PPF) wraps, acrylic parts, chrome/stainless steel/metal parts, gloss/matte plastic trims and fittings
(Installing on glass windows and windshield will present application difficulties due to viscous state of product, may cause irregular wiper movement, durability not tested)
Nano, BX, Metal Oxide or Devils Blood/Typhoon? Which would you go with, or maybe something else? Another great video Brian, I was waiting for this one!
Doug Green BX😁👍
Cool technology, I'd like to get a gloss reading before the vette leaves the shop.
Have u seen any products from dura coating technology there out of Naples they have some cool products . I'm using some of there graphene product coating
Would you recommend this for gel coat? Specifically a bass boat? It sees a lot of use, need something durable.
David Graham this or the Metal Oxide coating💪👍
It’s was pretty good until it went up against NV Nova Pro. I watched another video with this product, Car Craft Auto Detailing. It was intensive, but a good video. I don’t think this should be for the “do it yourselfers”, unless you’re the patient type of person.
Very impressive!!!!
Brian, that leveler isn't even considered a sacrificial layer but just what it says it is, correct🤔
Klasse Act it can be used before or after coating with the base coating. I truly would skip it and just have a damp microfiber nearby. It worked fine.
Do you/ Can you put more than 1 layer on? If so how many? Thanks
Scott Wunsch 2 layers... more is a waste. And I say 2 layers to ensure you have a complete layer as mistakes can happen.
At my age, I always "slow my roll" !
RB Musser 😂me too
Would you recommend layering if so how many?
C N Inspire yes... 2 is always best. More is a waste.
How long would you wait to apply the maintenance coat on top of the ADS nano graphene?
Any plan of doing ammo reflex sheet coat? Great video once again, Brian!
SinnedM I have no problem with that.👍
Which graphene coating is "Go get it now" ?
Cool this is a Singapore technology!
Would you recommend this nano graphene or their bx graphene coating?
The_GZA the BX is a breeze to apply.👍
What tire shine do you use? That looks amazing
Wesley Haws TAC Tire Coat.
Nice Brian
You've been on a bit of a graphene kick here lately, Brian. While I appreciate the look it provides, price and durability are still a concern. Since I have other options, I'll stick with what I've got...but I do appreciate you showing various graphene options, even if I won't be using any anytime soon.
UKSportsFan absolutely! Use up what you have. These videos are are a reference you can come back to at a later time.
can you use gyeon primer or carpro essence as a foundation for this coating?
Great video Brian. Question, can you layer this coating? If yes, how long would you have to wait between coats?
Nice need to try
Is it supossed to put the leveler first as a ground coating and then use the Graphene ? i read on a detailshop use first leveler to decontain from the ipa cleaners and polish leftovers. you use the leveler as the last step ???
Stefaan Conrardy you can use it before or after. It re activates high spots so you can remove them if they are left behind a few hours. I still believe all you need is a damp towel to follow up. Save your money.
Can graphene coating be applied on the top of a ceramic coating?
Great car and video it seems like it’s a new product every two weeks how do I choose what’s best for my car?
Is this a self heal coating?
Also I am curious about its risk getting water spots.
Feras Al-Hindi I am waiting to see if it is self healing when some of these cars come back. No water spot issues as of yet. I will keep you all posted.
@@apexdetail85 thank Brian you are the best.
What about the cost?
How does it perform with water spotting?
how about trying out nanoskin new t3 and t5 coatings?
Question please. Do you know if you can apply the coating on top of a PPF?
From the product spec sheet: Surface suitability: Gloss/matte clear coats on automotive body, vinyl wraps, paint protection film (PPF) wraps, acrylic parts, chrome/stainless steel/metal parts, gloss/matte plastic trims and fittings
I thought ceramic coating withstood the torches though?
Reminds me of igl eclipse stuff flashes quick mand it's a pain to wipe off
You must be stripping the black vette, every few days, as it gets a lot of products and camera time. But it does look really good. Please let us know what's going on BRYAN. JP IN SD.
John Pawlowski this C5 is not mine.😁
Oh, you sneaky boy
How many black vets do you have? They be glossy.LOL
I have been begging someone to do a full review of the Proje Ceramic Coating... The only real reviews are from the company... Can you please do one on this product... It seems to be a decent product but I don't know... A professionals review should help.... I hope you read this and consider this product for your review
T J I shall look into it. Never heard of it.
Hey Brian, have you ever considered test Flowgeneitcs products? I just saw an advert for it and the first thing I wondered was “I wonder if Brian has gotten ahold of this yet?” Anyways, stay safe and successful!
The Sams Channel I shall look into it.
alberto that beautiful corvette
was on a television or tv site a video from America was wax or some liquid meant for a car and the one that shows it put the hood on fire wiped off and told and show even the hood on fire that liquid would with stand it. and mi respond was and is that is nonsense.just wonder how they do that .thank you have a nice weekend
The cure time is a let down to be honest. Which product fall on the "Go Get It Now!!!?
Carlos Rivera I made a note to include get it now in an upcoming video👍
Hi Brian I was wondering does this product your car decals or should they be removed also is this just for the paint or can you do your windows also Thanks
Hi brother, my self Anil from India . I was looking forward to start a detailing studio and I take artdeshine product sample , what is your opinion on this brand especially how is there ceramic & graphene products
Am very much familiar with ceramic pro brand and there all products
Can you give your feedback
Anil AJ worth every penny... so far. Durability is still the question. I can only wait and see.
Brian is cquart light a good beginner coating to put on a 92 miata with single stage paint?
Roy Hale yes.. easy to apply. Take a look at Gyeon One. Video coming soon.
not saying you used real paint thinners or goof off product, but the spray on citrus degreaser i believe after all the other tow good just be water? Try using prepsol, then we will see what happens?
how would you prepare the car for coating applications on this graphene
Cesar Lebron sane thing as any other coating but you have to make sure you do every step in the video he shows on his channel without cutting corners. And absolutely nothing on the paint before applying
Exactly the same as any Sio2 coating.
I'm still wondering what genius thought any coating could stand up to a blow torch.
japspec96 they try it all the time on social media.😂
Does ArtDeShine have self healing properties. I saw a video of someone putting light scratches into the paint and removing them with a heat gun, similar to PPF. Is that another myth?
Paste the link ;)
Royal Detailing Afta ruclips.net/video/wSoNHWyhlDo/видео.html
Royal Detailing Afta ruclips.net/video/Rrkvgy7RsTk/видео.html
I will test when some of these come back for maintenance
do you let that flash?
I had another question..... Do you think this can be used as a topper or 2nd layer over an SiO2 coating like Jade quartz or CQ Professional?
How long does it last
Forgot this stuff was coming out.
The coating is pretty expensive at 200$ also this application is not too user friendly. Is the durability and gloss better than the traditional SiO2 coating like carpro uk 3.0?
I dont know that this was meant to be "consumer grade" I think it's close to a pro grade product.
The price on Carzilla is Canadian💰. Their $100 is $71 to us.😁
@@apexdetail85 Ohhhh. Thanks!
@@razz2o46 Agreed.
Question... I want to apply a coating to my UTV CanAm what would you recommend for the paint and all the plastic panels? I want to make it easier to clean and shine for years to come. Is Graphite an option?
Thanks Wes
Can this be used on trim and/or glass?
From the product spec sheet: Surface suitability: Gloss/matte clear coats on automotive body, vinyl wraps, paint protection film (PPF) wraps, acrylic parts, chrome/stainless steel/metal parts, gloss/matte plastic trims and fittings
(Installing on glass windows and windshield will present application difficulties due to viscous state of product, may cause irregular wiper movement, durability not tested)
The words Nano and Graphene are marketing word. No graphene present
Proof?
Have you looked at SPS Graphene yet?
sps and artdeshine are both formulated by Alfred yow....one is consumer - the other is pro install only....basically same product by the same creator....maybe slightest diff in gram/30ml...hope this helps
Come from the same source
So SPS is the pro end?
That cars bodywork would be keyed within 24hours where I live . I live in ihe middle of England which now ressembles the center of Lahore!
Is it really any better than most coatings out there? I mean, really? Can't the human eye only detect so much?