Your attention to detail is exceptional. Kindly educate us on using BMW tools for diagnosis and programming such as ISTA D and ISTA P as well as coding. I’m sure BMW users will forever be indebted to you. Keep up the good work. God bless
Exceptional Ovi, like always. I can see you've done this a couple of times. It's understandable the owner of this lovely G11 needs the cluster back, unfortunately. I would have liked to see you do the autopsy 😄
Maybe next one, but is not something complicated and I'm 99% that is a bad connection at the processor and for that will need a special rebelling tool and equipment
Hello Great video . in my Bmw 750 Li 2017 g12 i want to change the Heater Switch Heating Actuator right side . do i have to open the air housing like you make in video?
salut Ovidiu, am in g30 si cand e cald afara numai porneste dash-ul deloc.... cand se raceste masina porneste din nou si merge perfect... masina merge cu dash-ul complet oprit... ce as putea sa fac? pare o chestie de racire sau soft...daca las masina in soare nu porneste bordul deloc
Hi. Thank you for uploading. Really good info and it's almost therapeutic to watch you work. A quick question... The original cluster was getting too hot and there was also an indirect ventilation error that persisted. There are several air ducts behind the various instrument panels, as you had shown. Could the ventilation or flap fault not have caused the problem with the cluster in the first place?
Hello, no, the main failure was the new generation solder used in all electronics not only in this cluster, new generation solder that is widout lead but unfortunately, the new generation of solder is cracking very fast and creative cold soldering
Superbly done, any reason why not coding with ISTA+ directly? Not an expert, just asking...isn't ISTA+ supposed to be able to code that cluster? Anyway i'm really enjoying your videos, keep up the good work!
ista+ will program and code all the modules in the car and there is a big chance to put the navigation in antitheft , because the ilevel of the car is older than the ista that I have, you can do individually coding only if the ilevel of the car matches the ilevel of ista. otherwise ista won't let you to select or deselect for code or programming individual module. maybe I will do a video about this in future
Buna Ovidiu faci un lucru nespus de bine 👏🏻 ești foarte atent la detalii si explici foarte clar 👍🏻 poți te rog să-mi spui ce fel de case ai la Hp laptopul tau ? Ms
Salut! Nu e laptop e o tableta HP x2 g4, am gasit foarte greu acel case , norocul meu e ca era defect si nu sa vandut mai demult , si asa am pus eu mana pe el , defect avea o ureche de prindere rupta de la piciorul din spate care am rezolvato 😀 . E produsa de UAG
Intotdeauna m-am intrebat daca acele gauri din canalul de ventilatie sunt pentru racire pentru ca nu vad cum ai putea sa racesti instrument cluster iarna de exemplu cand dai clima pe cald si pe acolo iese aer fierbinte chiar.
Salut, Am facut un copy paste cu raspunsul meu la aceiasi dilema / intrebare pusa de altcineva :) : I don't' think so, because these cars are equipped with climate control and if you use the climate at full hot (in the winter) the air temperature won't exceed 35°C or 95°F , the normal working temperature for a processor is 40-65°C (or 104-149°F)
Hi ... I have a F45 from 2019 without ambient light i would like to make at least light line in the doors and central panel ... do you think it1s possible... i already bought and install all plugs and doors pannels from over car older than mine (2016)... but it did not work .. can you pls advice me something... THX and greatings for yours videos!
Mi a cqzut și mie cel full digital la g30 an 2017 la 150 kkm ,a trebuit să cumpăr altul .Exact la fel se montează ca și la g11 .Se pare că e o problemă destul de comună la G uri
Hi, how are you? I wanted to ask: - when a new bmw generation model comes out, how do you learn about its new components? - For the new generation of electric bmw, will your jobs be the same or different with repairing electronics?
Hello! Good questions! First BMW have always kept the same type or idea of construction... and once you know them, even if it is new and looks different, it has the same concept and seems logical to you. and for everything else that is new to me I take my necessary information's from TiS (Technical Information System) even in ista is so much information , the only catch is to read it :D And about the new electric generation, for me personally as an Electric and Electronics specialist will be the same.
@@MOvidiusalut! Am incercat cu de toate! Lasa urme grase! Si e durere cu inelele alea cromate, ca pe dupa ele e greu sa cureti! Am sperat ca ai o solutie magica ! 😂
Maybe in the trunk :))) ! I mean if you are able do some modification to physically fit and after that you are able to built a CAN transceiver to transform and translate the can information, maybe ...Maybe then you will be able to mount them!!
Hello, no reason! ideally is to send the car in sleep mod when disconnecting but even so when connecting a module, the car will be woken up , and above all I have everything needed in case something goes bad . :D
Salutare ! din pacate nu te pot ajuta ! nu ofer servicii de nici un fel , pentru servicii de retrofituri reparatii etc va trebui sa apelezi la un service specialiat BMW din zona ta!
Salut Adi ! pentru servicii de reparatii diagnosticari .. va trebui sa apelezi la un service specializat BMW dn zona ta ! Multumesc pentru interesul acordat!
I don't' think so, because these cars are equipped with climate control and if you use the climate at full hot ( in the winter) the air temperature won't exceed 35°C or 95°F , the normal working temperature for a processor is 40-65°C (or 104-149°F) .
Your attention to detail is exceptional. Kindly educate us on using BMW tools for diagnosis and programming such as ISTA D and ISTA P as well as coding. I’m sure BMW users will forever be indebted to you. Keep up the good work. God bless
Thanks for your appreciation, I will keep in mind your suggestion / request!
Thank you very much! There is a lot to learn from your wealth of knowledge 🙏
Literally the video I’ve been looking for to code my instrument cluster on my f20. Thank you, great video 👍
Great to hear!
Thank you for showing us how it’s done your work is amazing thank you
You are doing great job. Such a low mileage and owner allready need to spend money. This cars are really for Rich guys now days and not made to last.
Exceptional Ovi, like always. I can see you've done this a couple of times.
It's understandable the owner of this lovely G11 needs the cluster back, unfortunately. I would have liked to see you do the autopsy 😄
Maybe next one, but is not something complicated and I'm 99% that is a bad connection at the processor and for that will need a special rebelling tool and equipment
Hello Great video . in my Bmw 750 Li 2017 g12 i want to change the Heater Switch Heating Actuator right side . do i have to open the air housing like you make in video?
Great job. This channel is the best of its kind. Keep up the good work.
Thanks, will do!
Thank you very much for video !! You're the best !
Yikes... $2400. Thanks for the detailed instruction!
Hi, can you please check if the silver rings from your old damaged cluster can be removed so the screen has no rings like the 2018+ models
Fantastic work 😊
Świetna robota 👌
🖐️🇵🇱🖐️
where did you get the cable and the software to program
Top electrician!!!👍🏽
Thumbs up for not peeling the foil of :) But I still would like to...
Professional 👏
Can i replace my base G30 cluster with a used full digital cluster, following this steps?
salut Ovidiu, am in g30 si cand e cald afara numai porneste dash-ul deloc.... cand se raceste masina porneste din nou si merge perfect... masina merge cu dash-ul complet oprit... ce as putea sa fac? pare o chestie de racire sau soft...daca las masina in soare nu porneste bordul deloc
Hi. Thank you for uploading. Really good info and it's almost therapeutic to watch you work.
A quick question... The original cluster was getting too hot and there was also an indirect ventilation error that persisted. There are several air ducts behind the various instrument panels, as you had shown. Could the ventilation or flap fault not have caused the problem with the cluster in the first place?
Hello, no, the main failure was the new generation solder used in all electronics not only in this cluster, new generation solder that is widout lead but unfortunately, the new generation of solder is cracking very fast and creative cold soldering
Superbly done, any reason why not coding with ISTA+ directly? Not an expert, just asking...isn't ISTA+ supposed to be able to code that cluster? Anyway i'm really enjoying your videos, keep up the good work!
ista+ will program and code all the modules in the car and there is a big chance to put the navigation in antitheft , because the ilevel of the car is older than the ista that I have, you can do individually coding only if the ilevel of the car matches the ilevel of ista. otherwise ista won't let you to select or deselect for code or programming individual module. maybe I will do a video about this in future
@@MOvidiu Makes sense, if you make a video about this i'll watch it for sure...thanks for the answer, much appreciated.
I swear you are fantastic 😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍
Clean and proper job well done.
Thank you! Cheers!
Can I encrypt with bmw encryption adapter? Or force encryption through a computer tool like you did
Thx a lot man!
Welcome!
Buna Ovidiu faci un lucru nespus de bine 👏🏻 ești foarte atent la detalii si explici foarte clar 👍🏻 poți te rog să-mi spui ce fel de case ai la Hp laptopul tau ? Ms
Salut! Nu e laptop e o tableta HP x2 g4, am gasit foarte greu acel case , norocul meu e ca era defect si nu sa vandut mai demult , si asa am pus eu mana pe el , defect avea o ureche de prindere rupta de la piciorul din spate care am rezolvato 😀 . E produsa de UAG
Intotdeauna m-am intrebat daca acele gauri din canalul de ventilatie sunt pentru racire pentru ca nu vad cum ai putea sa racesti instrument cluster iarna de exemplu cand dai clima pe cald si pe acolo iese aer fierbinte chiar.
Salut, Am facut un copy paste cu raspunsul meu la aceiasi dilema / intrebare pusa de altcineva :) : I don't' think so, because these cars are equipped with climate control and if you use the climate at full hot (in the winter) the air temperature won't exceed 35°C or 95°F , the normal working temperature for a processor is 40-65°C (or 104-149°F)
@@MOvidiu Da, are logica, mersi ! :)
Question: Could I install the same gauges dashboard on a 2011 series 750 Li? Thanks
프로그램 잘 하시네요 저도 배우고싶어요 수고하셨습니다
After 18 minutes of watching, I really wait - foil remove stage 😂
Great video, please do a fitting on g30 “analog” to full digital display 👍🏾
Noted!
Salut ai întâmpinat probleme cu instrumente cluster să fie blank deși mașina pornește .?ce să fie BMW g30 2018
❤❤❤❤
Hi ... I have a F45 from 2019 without ambient light i would like to make at least light line in the doors and central panel ... do you think it1s possible... i already bought and install all plugs and doors pannels from over car older than mine (2016)... but it did not work .. can you pls advice me something... THX and greatings for yours videos!
Hello , you need to do a retrofit. to add wiring... and so on, if is complicated I advise you to search for someone that is able to do that .
Mi a cqzut și mie cel full digital la g30 an 2017 la 150 kkm ,a trebuit să cumpăr altul .Exact la fel se montează ca și la g11 .Se pare că e o problemă destul de comună la G uri
Atât de tare m a supărat, încât am vândut g30 și mi am luat f06 🤔
Da sunt niste probleme pe procesor ...
do you think the plugs from the base clsuter are the same and its plug & play + some coding retrofiting this one
Need to check SSP for wiring. and of course, will need to be coded.
Hi, how are you? I wanted to ask:
- when a new bmw generation model comes out, how do you learn about its new components?
- For the new generation of electric bmw, will your jobs be the same or different with repairing electronics?
Hello! Good questions!
First BMW have always kept the same type or idea of construction... and once you know them, even if it is new and looks different, it has the same concept and seems logical to you. and for everything else that is new to me I take my necessary information's from TiS (Technical Information System) even in ista is so much information , the only catch is to read it :D
And about the new electric generation, for me personally as an Electric and Electronics specialist will be the same.
@@MOvidiu Very interesting! Thank you. God bless you for all your hard work!
The new all digital cluster (which is also on 5-series LCI, without the silver plastics) is also compatible with this G11 version? Just curious.
Yes, is the same part.
Salutare, cum cureti sa nu ramana urme? Ca e un cosmar sa dai jos petele chiar daca stergi exista vre-o folie de protectie?
Salut, pai nu mai pune mana pe ele 😀 incearca cu solutie de geamuri sau de curatat ochelari ...
@@MOvidiusalut! Am incercat cu de toate! Lasa urme grase! Si e durere cu inelele alea cromate, ca pe dupa ele e greu sa cureti!
Am sperat ca ai o solutie magica ! 😂
👏👏👏👏👏👏 perfect
good video friend 👍👍👍
Thank you 👍
Hello, is now there is way to put LCI cluster to non lci model? If no, why?
Hello, yes you can, only new cluster together with MGU
Is it possible to upgrade it to a so-called live cockpit? The newest one with maps?
Yes, new cluster, new MGU new dysplay...
Can it replace with the full digital iDrive 7 cluster?
Yes , only with a NEW one and a new MGU
What the problem in the old one
Super !! video !
Cat costa modelul nou de bord ?
Hello . do you have de original icom ? and original ista ? thx
Hello, yes
Bravo ! 👏👏👍
salut,ai cumva video cum se poate scoate consola din spate de la ventilatie la un g11?
Salut , Din pacate nu am!
Buna. Unde ai atelierul?
Salut! din pacate nu am ''atelier'' nu ofer servicii de nici un fel am specificat si in descrierea clipului
How can i replace navigation
Why you changed this instrument cluster what was the problem with that
I told why , but if you have skipped in thru the video you have lost it . the cluster will stop working when is hot !
@@MOvidiu yeah I saw again full video
Hi mate I have same car and instrument cluster and navigation screen go off both
What can be the problem
@@realtuning5515 I don't know
Can this cluster fit in the f07?
Maybe in the trunk :))) ! I mean if you are able do some modification to physically fit and after that you are able to built a CAN transceiver to transform and translate the can information, maybe ...Maybe then you will be able to mount them!!
@@MOvidiu 🤣🤣🤣
Great work! And a quick question, why do you keep the ignition on while removing the instrument cluster? Thanks!
Hello, no reason! ideally is to send the car in sleep mod when disconnecting but even so when connecting a module, the car will be woken up , and above all I have everything needed in case something goes bad . :D
Hello I have problem black screen instrument
First, you need to diagnose it! If the cluster is found as the problem , replace it !
Unde te pot contacta și eu ? Pentru un retrofit la un g11?
Salutare ! din pacate nu te pot ajuta ! nu ofer servicii de nici un fel , pentru servicii de retrofituri reparatii etc va trebui sa apelezi la un service specialiat BMW din zona ta!
This is why I replace my cars every 3 years,so I can have the next best thing and keep up with the changes.
Isn't this covered by the warranty? Insane that apparently BMW makes the cluster not heated proof
This car is long out of warranty.
Salut! De unde ești? As avea nevoie de un electrician bun.... mulțumesc!!
Salut Adi ! pentru servicii de reparatii diagnosticari .. va trebui sa apelezi la un service specializat BMW dn zona ta ! Multumesc pentru interesul acordat!
In winter those hols will destroy the cluster with hot air all the time
I don't' think so, because these cars are equipped with climate control and if you use the climate at full hot ( in the winter) the air temperature won't exceed 35°C or 95°F , the normal working temperature for a processor is 40-65°C (or 104-149°F) .
As avea ceva de facut la un seria 6 gt poti lasa un nr de tel
salut !
Maybe because of the flap error, the old cluster didnt cool down hence the problems?
What is the OC mafia.exe with the mcdonalds logo on your desktop? I want it
:)) you eagle eye :)) is CIC Mafia , a tool for FSC codes (google-it)