now you need a final manufacture sticker in the door and your caster and camber is off, also the pinch bolt(tie rod tube) turned vertical is a dot violation has to be horizontal.
Great tutorial very good explanation EXCEPT that you must have each bag filled individually. Remove the T and install a separate solenoid for each side .OTHERWISE when you are on slanted road the extra weight from the center of gravity shift from one side to the other will push the air from the high pressure side to the low pressure side (NOT GOOD) and make for a bad suspension experience. Ask me how I know! You don't want either side to wilt under added weight or pressure!
Hell yeah man I’m been waiting on this video to figure out if I wanted to order this kit or not, you should do video on how you wire up the factory switch and gauge, I’m also located in Washington 🤟🏼
Nice! I had one installed on my truck and my passenger side keeps leaking at top oring, had it sealed 3 times and it’s leaking again. Did you have this problem?
The DOT will put you out of service with just 1 spring and not having the backup spring to catch the pin is the one breaks. Seen it with my own 2 eyes. Get you 389 factory air ride springs you will be good to go
Артём, добрый вечер! Посмотрел вашу с Владимиром работу с комментарием на русском языке, а теперь на английском. Так и мы, твои русскоязычные подписчики, начнём скоро по английски балакать!
Daddy is happy, 389 looking real good!
Nice job! You have a gold hands! And your's trucks are looking really good!
Awesome video 👍👍👍
Looking clean. You guys make it look super easy
That's awesome driver! I know your pop's is happy! And that's what counts!
Definitely! Lol
DAMN that is slick... well done
Truck looks good sir nice job
Nice work, guys!
Привет из Твери!
Мира, здоровья, удачи!!!
Посмотрел с перва видео папы на русском отлично.Подоспел видео Артема на английском с дополнением и все стало понятно.Молодцы Удачи Класс!!!!
Hi ARTEM! GOOD JOB.
now you need a final manufacture sticker in the door and your caster and camber is off, also the pinch bolt(tie rod tube) turned vertical is a dot violation has to be horizontal.
Great tutorial very good explanation EXCEPT that you must have each bag filled individually. Remove the T and install a separate solenoid for each side .OTHERWISE when you are on slanted road the extra weight from the center of gravity shift from one side to the other will push the air from the high pressure side to the low pressure side (NOT GOOD) and make for a bad suspension experience. Ask me how I know!
You don't want either side to wilt under added weight or pressure!
Hell yeah man I’m been waiting on this video to figure out if I wanted to order this kit or not, you should do video on how you wire up the factory switch and gauge, I’m also located in Washington 🤟🏼
That's great!!! Looks good 👍
Nice job . 👏 👍 👌
Be sure to post some video of that front bumper too ! 😬
How did you hook up your air going in the back
Nice! I had one installed on my truck and my passenger side keeps leaking at top oring, had it sealed 3 times and it’s leaking again. Did you have this problem?
Looks clean 👍
did you end up installing a shim on the peterbilt after the ag130?
Sweet setup 👍🏾
Hey brotha can you help me with the wiring to the stock dash switch to air up the suspension
The DOT will put you out of service with just 1 spring and not having the backup spring to catch the pin is the one breaks. Seen it with my own 2 eyes. Get you 389 factory air ride springs you will be good to go
Володе привет 🤠✌
Тема красавчик, теперь ждём когда кешу на воздух переведёшь
Where is your shop at bro
I was doing this earlier today.
I don’t get it
I thought truckers were not supposed to be low ?
Sempre sonhei em dirigir uma máquina dessa
👍💯👌
Тёма молодец
Do you sell the air ride for the t660?
Not yet, this is 12 gauge air ride kit can be bought from 4 state trucks.
Артём, добрый вечер! Посмотрел вашу с Владимиром работу с комментарием на русском языке, а теперь на английском. Так и мы, твои русскоязычные подписчики, начнём скоро по английски балакать!
Badaz
Save yourself the hassle and wash/degrease the area you're going to be working in.
Привіт з України чи можливо добавити з низу відео переклад відео супер підписаний на тебе і на тестя ви молодці відоси просто супер
Hellllpp lol
Тема интересно снял, но ни хрена не понял, и учить инглиш поздно уже почти 60
Включаю субтитры на Русский и вуаля. Всё понятно. 😃