Thanks for the video. I just found this, but why do you need another remote dump valve when you already have dump valves built into your leveling valves?
This will be a must on the new 589 to make it look like a nice looking truck. The front end is way UP in the air with a large gap in the fender to tire area.
I have a 2018 389 Peterbilt, it does have factory air ride on the front axle and low leaf on the rear, was wondering if you could help me out, I wanna put a auto car hauler front axle to give me the big drop, sit low, would you happen to know the part number of that Axle Beam? Peterbilt won’t help me with this because they only use the VIN number of your truck, which shows the parts build.
Other than a lower ride height, are there any benefits that make this kit better than factory? Better ride quality? Adjustable ride height/air bag pressure? Overinflate for clearance?
@@TheChromeShopMafiaOK, thank you. I have a 2019 567 with the factory air ride steer axle. It seems to be overly bumpy. Looking for a way to improve it. Thank you for your reply!
Twelve Gauge Makes it! Gen III Steer Axle Air Ride Kit For Peterbilt 379 2007-Older $2,439.99 Part#01-050901 www.4statetrucks.com/gen-iii-steer-axle-air-ride-kit-01-050901
installed 3 gen air ride 12 ga. front working good. back gets filled up and does not get down. any suggestion. i am not sure i have problem with rear axle over inflate. i dont know whats going on
For this install, typically not. However, we find some trucks are a lil’ more sensitive than others. So, for optimum results, it may be beneficial to adjust rear susp ride height just a tad, OR, modify driveline angle ever-so-slightly.
A new $250,000+ 2024 Pete, adding a $2300 air ride kit...... installed using channel lock pliers, washers for spacers and cheap AutoZone plastic switches?? 🤔.
Thanks for the video. I just found this, but why do you need another remote dump valve when you already have dump valves built into your leveling valves?
We'll have to ask Forest on this one?
Thanks this was a great video installing the air ride system !! Very good detailed on this video !!!!
This will be a must on the new 589 to make it look like a nice looking truck. The front end is way UP in the air with a large gap in the fender to tire area.
Been waiting on this series going to be killer 👍🏻
Do y'all make a kit for a carhauler for the extra weight above the cab? Is the ride height adjustable from inside the cab?
give us a call at 888-875-7787 Ext. 148
I have a 2018 389 Peterbilt, it does have factory air ride on the front axle and low leaf on the rear, was wondering if you could help me out, I wanna put a auto car hauler front axle to give me the big drop, sit low, would you happen to know the part number of that Axle Beam? Peterbilt won’t help me with this because they only use the VIN number of your truck, which shows the parts build.
Give us a call at 888-875-7787
Other than a lower ride height, are there any benefits that make this kit better than factory? Better ride quality? Adjustable ride height/air bag pressure? Overinflate for clearance?
No, Its objective is to slam the front end down on the ground
@@TheChromeShopMafiaOK, thank you. I have a 2019 567 with the factory air ride steer axle. It seems to be overly bumpy. Looking for a way to improve it. Thank you for your reply!
Im number 700 thumbs up fellas 👍
Thanks for the 👍
Do they make this kit for a 2015 Freightliner Cascadia?
Unfortunately no, only for a 389, 379 and W900.
@@TheChromeShopMafiacost 2007 379
I got this air ride kit on my 2022 389 and I love it
Is the install any different with non air ride 389 from factory
Did you guys have problem with the bag rubbing on the coolant pipe on passenger side? I’m have that issue when the bag is expanding hitting bumps
No, we did not have any problem.
which box has the lot lizzard in it?
Not included.
@@TheChromeShopMafia well hell guess i wont be getting that system lol
Can't wait to see this build
I am wondering if 2 1/2 inches of travel is enough. Am I missing something?
2.5 is what you want.
A sweet new truck, all that work with half assed switches
do you make one for a 2005 379 and if so cost
Twelve Gauge Makes it! Gen III Steer Axle Air Ride Kit For Peterbilt 379 2007-Older
$2,439.99 Part#01-050901
www.4statetrucks.com/gen-iii-steer-axle-air-ride-kit-01-050901
Do they make a front air ride kit for a 83 359?
Good afteroon,
If you would give us a call, tel:888-875-7787 we can get you with a Parts Pro to see if we can get you the information you need.
So all in all that kit makes it looka little better, when it' parked.
One way to look at it, It gives you a lot of different options than just being set in one position.
Is it possible to put a air ride kit on a 20,000 lbs Steer Axle
As long as it has factory air ride I would think so.
installed 3 gen air ride 12 ga. front working good. back gets filled up and does not get down. any suggestion. i am not sure i have problem with rear axle over inflate. i dont know whats going on
Do those bags have a built in bump stop?
If you send your contact information we can get to a parts pro.
If you would private message us on Facebook we can get you a parts pro
What’s that orange hose under the fuel water separator
Good morning,
It is the electric cord to the heating element in the fuel water separator
Did u guys installed on car hauler axle. Or on regular 3 inch axle .
Axle looks like wide trac. I’d go on a limb and say that’s car hauler axle
good jab 🤩👍
Do you have a hanger part number for this?
Good morning! It is a kit 01-0509126.
The height difference not being adressed is killing me slowly. Spacers should’ve been added to the leaf springs to even it out
What model and part number to order please
Good morning, if you would give us a call we can get you with a Parts Pro to see what options we would have for you. Thank you!
Does this kit require fuel pump grinding to clear air bag on the Cummins motors ?
No it does not.
@@TheChromeShopMafia thank you! Awesome video.
Will there be issues with the driveshaft with a lower front end?
For this install, typically not.
However, we find some trucks are a lil’ more sensitive than others.
So, for optimum results, it may be beneficial to adjust rear susp ride height just a tad, OR, modify driveline angle ever-so-slightly.
Nice ride
Address please
4 STATE TRUCKS
4579 Highway 43
Joplin, MO 64804
888-875-7787 ext 125
Watch the old show on your fixing up the trucks
I bought a 12 guage single bag conversion kit for a W900. I wish you guys would not sell that! Its a death trap & a POS!!
Ever need to change air bag have to take off bracket and get new u bolts
Now Brian drive it through some gravel again. Lol
A new $250,000+ 2024 Pete, adding a $2300 air ride kit...... installed using channel lock pliers, washers for spacers and cheap AutoZone plastic switches?? 🤔.
Gr8 Vid!!!!!!!
DIGITAL DASH.. 🤢🤮🤢🤮🤮
It’s ride HEIGHT, Bossman, not ride heigth !
The cheesy leveling rod is no bueno !! should use s.s. all thread with s.s. heim joints.They will never brake..
These new trucks are crap. I am driving a 2023 389 peterbilt. The dash is crap. It has to be reset all the time.
This video makes it seem like this job takes way more money and effort than it's worth ❓