1996 300zx factory BOSE Amplifier Bypass

Поделиться
HTML-код
  • Опубликовано: 2 май 2017
  • In this video, I will show you how I was able to bypass the factory bose system in my 1996 300zx. This method worked great for me and saved me time and money.
    ( THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY )
    ( ATTEMPT AT YOUR OWN RISK )

Комментарии • 15

  • @Z32orDIe
    @Z32orDIe 7 лет назад +2

    bad ass. keep making vidz man. love z32's!

  • @SuperZitkus
    @SuperZitkus 4 года назад +2

    Ok guys i will make this all simple i did all this today with my car
    you don't need the blue connector connected at all if your not using the amps also at the radio harness you can just use a regular harness you don't need that stupid thing oem pac ending up trashing it
    signal wires are twisted together i cut all wires at the amp plug in and then connect the main colors from the harness which are purple and yellow all speakers use this from the amp
    purple wires are all positive every speaker has the same plug in
    yellow wires are all negative
    you guys are welcome!!!

    • @solvic199
      @solvic199 2 года назад

      Hey I got a question

  • @lukecucumber3495
    @lukecucumber3495 5 лет назад +1

    i tried the same but am not getting any sound from the speakers.
    new deck and followed what you did

    • @carloscandelaria2935
      @carloscandelaria2935  5 лет назад +2

      After you de-pinned the connector and connected the Purple and Yellow wires directly to the speaker, Did you reconnect the plug at the harness? That happened to me the first time, then I realized I forgot completed " The Circuit " I had to reconnect the main blue connector.

  • @george9267
    @george9267 6 лет назад

    Just a quick question . What did you do with the orange and black wires? Did you connect them together? What else did you do? I tried this and my new speakers dont sound well

    • @baxterdeberry3463
      @baxterdeberry3463 6 лет назад

      did yeah change the factory radio?

    • @carloscandelaria2935
      @carloscandelaria2935  5 лет назад

      Nothing, I just terminated them with a butt connector. Sounds quality is dependent on may variables, check your EQ setting on your radio first.

  • @christianvela8379
    @christianvela8379 6 лет назад

    So what does this accomplish exactly? Will it sound much better? Is the stock amplifier good?

    • @carloscandelaria2935
      @carloscandelaria2935  5 лет назад +1

      Well, the old bose system is pretty out dated and now a days, aftermarket radios tend to have higher outputs than boses 20+ year old amps, not to mention, almost impossible to buy replacements, if yours are broken. I just wanted some clean mids and highs, and didn't want to install a complete new audio system.

  • @MrSicwitit2008
    @MrSicwitit2008 6 лет назад

    Did you have to do this for all 4 speakers

  • @j.d.ussery1163
    @j.d.ussery1163 7 лет назад

    which one is pos and neg of the purple and yellow?