Just a quick note. Make sure you use silicone II. Silicone 1 (smells like vinegar) can corrode contacts. It isn't for metal contact. Silicone II has a bit of an ammonia scent and is metal compatible.
If it's done just watch it. The acid disapates when the silicone cures. If it touched bare metal you may have some issue down the road. Hopefully you get lucky!
Very good vid. Truly enjoy the way you explain in detail, pointers, suggestions etc. The feedback on products, and the hands on application of the mods you are doing.
Thanks again for your video/guide! The step about waterproofing these lights is missed on many install videos for this light. Followed exactly what you did and got my lights waterproofed and installed :)
Follow up.. Followed your vid.. Used silicone II and di-electric grease. Everything worked perfect and after 10mths or so I'm getting hyper flashing on the driver side. :( Debating on replacing resistors and such or just installing the stock lights back to avoid the headaches.
Interesting! Something wasn’t done right then because I had these tail lights on my z71 for over 3 years without issue. Might want to check to make sure none of the silicone cracked and let water in.
I got the same 3rd brake light. A couple of months ago. I warp the rest of the wires with electric tape. Put electrical grease on the connect. And silicone on top after installing it. Working out great so far. And we have had a lot of rain.
I've had this light and the thicker seal on my red Colorado and now this one for a combined time of a year and a few months. No leaks. This is definitely the way to do it.
Looks great but reviews are concerning. I think the thicker gasket is the fix for the water getting in but I’m hearing the light is barely visible in daytime and the bulbs yellow over time? Did you notice this on your Red Colorado at all?
@@BarryMacokkiner no my 3rd brake light is very bright. No leaks sofar. I sealed it up as best as someone could. And I live in Massachusetts so we get a lot of rain and everything lol.
@@jasonlewis6914 thanks for the reply. I hear ya, living in PA I know what your saying with so many season changes weather can be hard on the vehicles. Love your videos and the info you provide. Big help in making many of my purchases for my midnight edition.
@@HorsePowerObsessed Always , like i said Enjoy anything U/HPO put's out , Learned so MUCH content since Following ur Channel . & Blackout Tinting , Both ARE #1 !!!!!!!!!!!!! Keep em Coming always #1 Fan
Looks amazing I got to say you sure love Amazon LOL. I already ordered my smoked out LED tail lights I like the third brake light you got so much I'm going to go ahead and get it! All I can say is I wish I would have done a little bit more homework on my tail lights mine came with pretty good size resistors but they have to be 3M tape to the inside of the tail light wall or somewhere out of the way. Thank you for the water resistance tips!
Thanks for another great vid! I’ll be doing this to my ZR2 as well. Lastly, I can’t thank you enough for the 3D printed dust covers for my head lights! Install was a breeze, and fitment was spot on! My new led bulbs are 100 times better/brighter than stock 👍🏼
Ive got a set of the clear lens spyder lights waiting in a box for installation this weekend. I was planning on the dielectric grease but now I'll pick up some silicon and bigger heat shrink tube.
Haha remember me saying I had already received my tails but waiting on this video? It's the exact ones you went with so the video is extra easy to follow. My 3rd is from evil bay and looks like the one you had on the red truck. Also have the gasket here waiting. Have a link to the heatshrink used? Thanks again!
@@HorsePowerObsessed The evil bay 3rd brake light looked to have a thick gasket installed. I went ahead and just put it on the truck. It looks sealed at least. Do you think I should "double gasket" it with the amazon one I got?
Just an update to this; Anzo released a new version I believe this month. Def improvement from this previous version. The did weather proof the connects as described here. Ill be posting pic on the Colorado/Canyon forum. Daytime running C bar is larger which I like.
I saw the update but it’s still not 100% waterproof. It looks like a good bit of the connectors are now weather proof but I saw at least two connectors that still need silicon.
I did this in mine, they lasted a year, both resistors causing fast flash and one of the lens fogs over every night. Ordered a pair of Autowiki LED tail lights, installing them today. If these go bad I'll move on to Anzo
Hoping for some help with this install. Thanks to this video I was ok doing the dielectric grease, silicone, heat shrink tubing. But I'm stuck with disconnecting the stinkin' taillight wiring harness. I got under the truck ('16 Colorado Trail Boss) and guessed wrong at how the harness unclips, and ended up breaking off the red tab. I was able to pry out the broken red bits, but the harness won't come apart. It's like it's glued on. I tried on the other side, that time pushing the red tab back correctly, but that connection won't come apart either. I yanked so hard I broke that red tab off too when it was extended to the open position. I yanked on the connections on both sides a ton, but they're not coming loose. I found a video online showing the disconnect, and it looks like a baby could do it. Am I missing something here? Could they be glued together? Is it just dirt, dust locking them together?
You are not missing anything, they are really on there. Could be dirt and dust holding it together but keep messing with it and you'll get it. Instead of pulling straight apart try wiggling it as well as you're pulling. It will come off. If it makes you feel any better, I broke my red tabs, too lol
Nooooo! "Currently unavailable" on Amazon. I really love the look of those tail lights. I think they would look great on my Black 2019 Colorado Luxury package. Thanks for the excellent install video as usual.
Great video! Bought some LED taillights off Ebay for my 2020 Colorado. Once I installed them, the check engine light came on. My scan tool showed codes for "tail lamp circuit short to battery" and "tail lamp circuit open". These codes were in the body control module. Have you had any issues like this with the taillights you installed? Any thoughts? Thanks!
Will these lights fit a 2022 Z71 Midnight edition. I have one coming in October and I really like the looks of these. Thanks for the videos. New subscriber
I just got mine and followed your steps exactly. I know you don't have the ZR2 anymore, but did you ever end up having any issues with these over the life of having the truck?
@@HorsePowerObsessed what's the easiest way to get the red safety tab connector off. I popped the tab out, now what is the magic trick to get it to release?
Thanks! Trust me I've been under there already to fix it and unfortunately the previous owner had it welded and it was welded crooked. This kind of stuff draws me insane so if I could have fixed it it would have already been fixed 🤣 with that said, I may or may not have a borla exhaust on its way... 🤫
poor guy must have been cross eyed. have a borla set of straight pipes on black car sounds good deep tone. they were a little crooked too had to do a little bit of persuading but they came out good.
Hey, I need some help and this is my best chance. The wiring harness, is there 3 or 4 pins on the connection? Lost my running lights and not sure if I lost the pin or there's another issue. Thanks!
I do believe it’s only 3. Did you seal them up real good like I talked about in this video? If you didn’t, water probably corroded it and that’s why you lost it.
@@HorsePowerObsessed It's on my factory lights. I went the Led bulb route with resistors which were fine for awhile but then lost running lights on the driver side. Brake and turn signals are good. Took it apart and some minor corrosion. I'm going to try some grease in there which might help. Just looked like a possible 4th pin was broken but couldn't fully tell sadly. I'm going to grease and silicone everything in the future now though thanks to this video tip
Excellent, congrats! I do not have any headlight recommendations, unfortunately. The aftermarket seems to be very very poor quality for headlights in my testing.
Would anyone know if the white wire on these tail lights control the reverse like the original ones do? I want to install a tailgate bar and need to know. Thanks.
@@HorsePowerObsessed thank you for the response. I thought as much. But I just wanted to make sure! Your videos are awesome by the way. A huge part of the decision making when I bought my truck.
I know this is an old video but I also know you are still creating other content so I am hoping you will still respond. I am loving your videos for both Colorados. Just got a used 2016 z71 and am going to do some of these mods for sure. I actually got the anti rattle kit on my own without the videos. My question is what silicone sealant do you use?
Now that it's been a few months, have you had any water leak around the third brake light? Truck looks awesome! I wanted black, but couldn't locate one close to me. However, picked up a 21 Z71 in the super sexy cherry red. I am working on doing a red/ black theme on it. I absolutely love the lights you've installed here and will look at ordering them! May also nab that ignition ring... I end up jamming my key in there all the freaking time! 😂 Hey, Chevy, why no push button start?! We all want it!
The third brake light that you have Linked In the description is not available anymore so I got a different one. It came with a foam seal around it already and I'm wondering do I still need to use the one that you have Linked In the description or will this the enough. I ordered the seal linked In the description it hasn't arrived yet though. I would send a picture but I'm not sure how to do that on here. And if I do need it should I remove the old one and replace it with this one or put the new one over top of the old one?
Tail lights are currently unavailable both on amazon and do not even show up on the company website. I wonder if they had too many issues with water? Shame, I really like these, but living in Vancouver, 100% humidity is a common thing, I'd hate to have water issues
First thank you for your video's your ZR2 is coming along awesome. I picked up a 2021 Colorado RST in Satin Steel less than two weeks ago, I think it looks great. Other than some emblem changes and Tonneau cover I want to up grade to LED lighting. Lasfit has a complete exterior LED package minus the rear turn signals, so I called them to ask why? They said a few Colorado owners were having error messages on their dash board when changing rear turn signals. Have you heard of this and if you have what do you think can cause this?
Canbus issues can cause errors on the dash but all the LEDs I've done so far have not caused any problems. I, personally, would get aftermarket tail lights versus getting LEDs for the stock tails. The biggest problem is they are going to hyperflash in the rear without wired in resistors if you get LEDs for the stock unit.
@@HorsePowerObsessed I didn't waterproof before install and now my camera is going crazy. Do you think if I remove the lights, get them dried out and then waterproof them as you showed that'll solve my problem?
Because companies have not updated their info yet to the new models. I'm having the same issue (bought a 2022 ZR2). Because there are no changes from the '21 model I just select the 2021 for now. I pretty sure the Z71 is the same '21/'22 models but you could double check with a dealer
Are these the Spyder brand or the VIPMOTOZ on Amazon? Also, the 3rd brake you you have linked is no longer available, do you know of another that’s similar?
Hey there my friend just wanted to check and see if your tail lights are still working properly I only ask because I bought a set that were half that price and they did not last more than 2 months I just bought a set of the same ones you got ?
How has the 3rd brakelight held up for you with water leakage? I bought that light and the same thick gasket as in your description and I have moisture in mine. Just wondering how your is holding up.
So they are done with the truck and they, located the point of failure. had to replace the trailer brake auxiliary control module so you think that could have been caused by the lights I did the exactly what you did in the vid
So they just finished the truck and the trailer brake auxiliary control module was constantly drawing power causing the battery to be depleted so you think it was the tail lights I took them off and put the old ones I did everything you did in this video just wondering what your thoughts are
Looks great w the new tail lights. Got the same tailgate letters for my 21 Z71 in Gloss black. Great product from BD trims. Great content. Please keep the videos coming.
I ordered these tail lights for my 2021 Colorado Z71 and they just came today. The outside of the box has this big warning label on it warning that the tail lights are only for car shows and off roading and not to open it unless I know they aren't for regular road use. And then I just noticed it in the description too, which I must have missed before. Are you happy with these? Are they bright enough for road use? I'm nervous to open the box. Thanks.
100% bright enough for daily use. They are far brighter than my stock ones were just like I showed in the video. They only put that kind of stuff on the box to cover themselves but I have had absolutely no problem in my two years of use with my red one and my 3 months of use in the black zr2
@@HorsePowerObsessed Great, thanks! Thank you very much for your quick reply as I wasn't going to install them till I heard back from you. So now I have the LED fog lights, LED headlights, tail lights, inside LED bulbs for dome lights, vanity mirror LED's, black steering wheel bow tie and a new Bedrug to install this weekend. My Z71 isn't a midnight edition but it's close to getting there. Thanks again, enjoy your videos very much.
None just like this. It should come back in stock soon. If you just want a blacked out one let me know, I can find others that are blacked out just not ones that look just like this.
Will the 3rd tail light that is linked in your video fit a 2021 zr2? Asking because when i clink on the link and then on Amazon it says will not fit my 2021 chevy colorado zr2.
Quick question- How has your weatherproofing/sealing for your tail/3rd lights held up since the time you installed them? I am purchasing Spyder tail and Lumen 3rd light for my canyon and all reviews are full of people complaining of corrosion and total dysfunction as early as 3 months - clearly it seems they did not waterproof them. Also, I have called a few professional installers in Houston, TX and they refuse to weather proof/seal the connectors as you describe it in your video because "it's would be way too expensive and time consuming" eventhough their pricing for basic labor is already $150 (without weather proofing or sealing anything).
Just curious if you’ve had any problems with the lights since you put them in I got some I did not do the silicone but they start activating my back up camera sometimes and ones totally out got a refund but is it worth getting the same ones and doing this does it work good in the long run?
Without the silicone, they won't last long. Once the water gets in, they are basically trashed. You have to seal up the wires. I had a set for 3 years without any issue after siliconing them.
Justin, it shows they fit a GMC Canyon, but guys in the Q&A section say not. Would you happen to know? Could there be a fitment issue where a minor bit of work is required?
If you click the link he has above for them it'll bring you to Amazon. Mid page it shows this model and one with a clear outside housing which should be street legal
any issues with any of the trucks electrical components, LED add on lights will sometimes mess with circuit. ? also the electric grease goes on the out side... it creates a seal around the connection. should NOT use it where the metal connector contacts another metal connector.
Literally the definition of dielectric grease: "Dielectric grease helps create extra insulation for electrical connectors, prevents arcing and is ideal for any electrical connections with rubber gaskets." "So dielectric grease is often found around electrical systems, where it can be used to lubricate connectors, seal gaps, and thwart corrosion by preventing moisture ingress. Better still, dielectric grease can typically withstand extreme heat cycles, which makes it a smart choice to stop plastic and rubber parts from fusing together in high-temperature environments, like, say, in an engine bay." All of this is to say, put it in the electrical connection with the rubber seals inside. I have been, and everyone I know has been using it this way for years. It's all good. It seals it and helps keep water out as well as aiding against any kind of corrosion on the contacts. Can't say I trust a youtube channel with 700 subs telling me otherwise.
The tiny lights that turn on when you use your turn signal. I had an alert on my truck saying “check right rear turn signal lamp.” I figured it’s the small lights and not the big LED one. Is it replaceable or do I have to buy a whole new set?
Not at all. Unless water gets into them, then they force the backup camera on. I had them on my red colorado for over 2 years and now my black ZR2 for about 2 months with no issues.
My buddy purchased these. And they shortaged out fast. Hence snow and ice in Wisconsin is brutal. Re wired the connectors to butt connectors. Everything works except the drivers side is blinking fast. I believe we wired something wrong or the taillights are junk. Everything else works. I thought maybe a bad bulb somewhere. But no bad bulbs... please help.
My only question is why tf did that company stop making the tail lights like they made then for the 2006s. I almost dont want to buy these cause are not them. But these do seem to be the best i can find out there.
I assume you meant tail lights? The electrical issues you are referring to were taken care of by the steps I did before the install. All of the issues were caused by water leakage and with some silicone, you can fix that issue.
Looks great those of the tail lights I put in I didn't seal them up though maybe I'll take them apart and seal them up thanks for the tip guy. What drives me crazy on mine is the silver lock on the tailgate and door I'm just about to the point where I'm gonna take a sharpie and color mine. If you want to check out my ZR2 I just click on my Facebook page. Call my ZR2 Rockenstein
Ok. I think the clear lense is more likely to do this since the black one is tinted pretty heavy. You probably wouldn't notice it with the tinted lense even if it did happen.
What do you guys think of the *almost* fully blacked out ZR2?
Looks killer 🤙🏼
Luv It ! GRADE A ,,,,,,,,,,,,
Just sleek and sinister looking!
Thank you!!
It's really a fantastic looking truck stock but with a few mods... It's almost perfect looking!
Just a quick note. Make sure you use silicone II. Silicone 1 (smells like vinegar) can corrode contacts. It isn't for metal contact. Silicone II has a bit of an ammonia scent and is metal compatible.
So I accidentally used silicone 1 on my taillights. I’m I actually going to run into issues or will I probably be fine?
If it's done just watch it. The acid disapates when the silicone cures. If it touched bare metal you may have some issue down the road. Hopefully you get lucky!
Thank you sir
Man I’m 20 years old, got basically my dream truck, was either the zr2 or the tremor, you have inspired me so much!!
They are awesome trucks! I'm happy to help! If you have any questions, let me know.
I have the 2018 ZR2. I bought these tail lights after watching your vid. Easy fix you showed.
The tail lights look great. Thank you for the tips!
Glad I could help!
Just installed these taillights and followed your instructions. Thank you very much for doing this video.
You're very welcome! I'm glad it helped you!
Very good vid. Truly enjoy the way you explain in detail, pointers, suggestions etc. The feedback on products, and the hands on application of the mods you are doing.
I appreciate that! I'm happy to help!
Thanks again for your video/guide!
The step about waterproofing these lights is missed on many install videos for this light.
Followed exactly what you did and got my lights waterproofed and installed :)
You’re very welcome!
Follow up..
Followed your vid.. Used silicone II and di-electric grease.
Everything worked perfect and after 10mths or so I'm getting hyper flashing on the driver side. :(
Debating on replacing resistors and such or just installing the stock lights back to avoid the headaches.
Interesting! Something wasn’t done right then because I had these tail lights on my z71 for over 3 years without issue. Might want to check to make sure none of the silicone cracked and let water in.
Very good detailed explanation on how to weather proof those taillights 👍 Thanks for sharing
Glad I could help!
I got the same 3rd brake light. A couple of months ago. I warp the rest of the wires with electric tape. Put electrical grease on the connect. And silicone on top after installing it. Working out great so far. And we have had a lot of rain.
I've had this light and the thicker seal on my red Colorado and now this one for a combined time of a year and a few months. No leaks. This is definitely the way to do it.
@@HorsePowerObsessed most definitely man. I just checked the light every so often make sure no leaks. I have new back up 3rd brake light just in case.
Looks great but reviews are concerning. I think the thicker gasket is the fix for the water getting in but I’m hearing the light is barely visible in daytime and the bulbs yellow over time? Did you notice this on your Red Colorado at all?
@@BarryMacokkiner no my 3rd brake light is very bright. No leaks sofar. I sealed it up as best as someone could. And I live in Massachusetts so we get a lot of rain and everything lol.
@@jasonlewis6914 thanks for the reply. I hear ya, living in PA I know what your saying with so many season changes weather can be hard on the vehicles. Love your videos and the info you provide. Big help in making many of my purchases for my midnight edition.
I just bought the Spyder tail-lights for my Zr2 and this video is invaluable!!! Prepping them for install, right now!
Awesome! You're going to love them!
Justin , i know all about water leakage , LOL , but very glad to see another HPO , video !!! u made my Day ,, Brother !!!!!!!!
Thanks, Ken! I'm happy to help! 😁
@@HorsePowerObsessed Always , like i said Enjoy anything U/HPO put's out , Learned so MUCH content since Following ur Channel . & Blackout Tinting , Both ARE #1 !!!!!!!!!!!!! Keep em Coming always #1 Fan
@@kenberan4875 I appreciate that!
The taillights are bad ass. Love the raised lettering as well.
Thanks, man!
Great seeing this. Just bought myself a 2021 black colorado zr2, hard to these after market parts in ontario.
Just put my set on today followed your method,thanks for the video
Awesome! You're very welcome.
Looks amazing I got to say you sure love Amazon LOL. I already ordered my smoked out LED tail lights I like the third brake light you got so much I'm going to go ahead and get it! All I can say is I wish I would have done a little bit more homework on my tail lights mine came with pretty good size resistors but they have to be 3M tape to the inside of the tail light wall or somewhere out of the way. Thank you for the water resistance tips!
You're very welcome! My mail man knows I like Amazon as well lol
Thanks for another great vid! I’ll be doing this to my ZR2 as well. Lastly, I can’t thank you enough for the 3D printed dust covers for my head lights! Install was a breeze, and fitment was spot on! My new led bulbs are 100 times better/brighter than stock 👍🏼
You're very welcome. Those dust caps are a must in my opinion!
@@HorsePowerObsessed 100%! I still have yet to upgrade my brights, but once I do, I’ll reach out to you for 2 more if needed.
Sounds good!
Ive got a set of the clear lens spyder lights waiting in a box for installation this weekend. I was planning on the dielectric grease but now I'll pick up some silicon and bigger heat shrink tube.
Definitely! This is the way to ensure they last as long as possible!
Good day Justin; like the rest of your fleet, the ZR2 is looking awesome; as always, thank you for the amazing content; take care !
Thanks! It's looking better every day!
Your truck is looking good man 👍🏻 I need to get my Colorado dialed in.
Thanks, man! I didn't know you had a Colorado! We should get them together some time!
I have the same tail lights and love them
💯
Looks 100% better. This should be stock on all Midnight additions.
Agreed! Thank you!
Haha remember me saying I had already received my tails but waiting on this video? It's the exact ones you went with so the video is extra easy to follow. My 3rd is from evil bay and looks like the one you had on the red truck. Also have the gasket here waiting. Have a link to the heatshrink used? Thanks again!
Oh right! You can grab that heat shrink here: amzn.to/3xuXWVf. Send me some pictures after you get them installed!
@@HorsePowerObsessed The evil bay 3rd brake light looked to have a thick gasket installed. I went ahead and just put it on the truck. It looks sealed at least. Do you think I should "double gasket" it with the amazon one I got?
Just an update to this; Anzo released a new version I believe this month. Def improvement from this previous version. The did weather proof the connects as described here. Ill be posting pic on the Colorado/Canyon forum. Daytime running C bar is larger which I like.
I saw the update but it’s still not 100% waterproof. It looks like a good bit of the connectors are now weather proof but I saw at least two connectors that still need silicon.
@@HorsePowerObsessed yes u r correct. The main connector and resistors.
@Train & More Trains could you post a link for the " Colorado/ Canyon forum" please and thank you.?
Looks awesome. Can’t wait to see more ZR2 content.
Coming soon!
I think 3rd brake light and tails will be my next mod, but I'm currently waiting on parts for custom headlights. Trucks lookin real good!
Thank you! The tail lights make a HUGE difference!
I did this in mine, they lasted a year, both resistors causing fast flash and one of the lens fogs over every night. Ordered a pair of Autowiki LED tail lights, installing them today. If these go bad I'll move on to Anzo
If you do the weatherproofing correctly they’ll last years. I’ve had 2 sets last over 3 years on 2 different trucks and I traded it with them in it.
Wow that looks really good with those new tails and the orange 🍊 letters swapped out for the black.
Thank you! GM says that was "red" 😒
Hello there, what's the measurement of the hot shrink tube for the cables of that size? 14mm?
Hoping for some help with this install. Thanks to this video I was ok doing the dielectric grease, silicone, heat shrink tubing. But I'm stuck with disconnecting the stinkin' taillight wiring harness. I got under the truck ('16 Colorado Trail Boss) and guessed wrong at how the harness unclips, and ended up breaking off the red tab. I was able to pry out the broken red bits, but the harness won't come apart. It's like it's glued on. I tried on the other side, that time pushing the red tab back correctly, but that connection won't come apart either. I yanked so hard I broke that red tab off too when it was extended to the open position. I yanked on the connections on both sides a ton, but they're not coming loose. I found a video online showing the disconnect, and it looks like a baby could do it. Am I missing something here? Could they be glued together? Is it just dirt, dust locking them together?
You are not missing anything, they are really on there. Could be dirt and dust holding it together but keep messing with it and you'll get it. Instead of pulling straight apart try wiggling it as well as you're pulling. It will come off. If it makes you feel any better, I broke my red tabs, too lol
Use some back to black on your tailgate handle, and it will turn it gloss black.
Nooooo!
"Currently unavailable" on Amazon. I really love the look of those tail lights. I think they would look great on my Black 2019 Colorado Luxury package. Thanks for the excellent install video as usual.
Not sure where you are, but if you’re in Canada Tdot performance has them, and if you’re in in the US Carid has them
When you put the new gasket on the 3rd brake light did you add it to existing gasket or install just the new thicker gasket by itself?
The new thicker one was installed by itself.
Did you end up putting any silicone on the lead ins to where to resistors were housed? Or just on the connections?
Just the connections.
Great video! Bought some LED taillights off Ebay for my 2020 Colorado. Once I installed them, the check engine light came on. My scan tool showed codes for "tail lamp circuit short to battery" and "tail lamp circuit open". These codes were in the body control module. Have you had any issues like this with the taillights you installed? Any thoughts? Thanks!
Looks great
Did you let the silicone sit to dry before you he shrink the wires
No. It helps squeeze it in better if it's not dry first.
Will these lights fit a 2022 Z71 Midnight edition. I have one coming in October and I really like the looks of these. Thanks for the videos. New subscriber
Yes sir they will! I appreciate the support!
Love the tinted taillights. I noticed they are sold only for off road use and not street legal? Have you had any issues (being pulled over for them)?
Nope. My friend and I both have the same sets and neither one of us has had any problem.
I’m really starting to love this truck
Same here!
Can you give me some part numbers for your lights and the foam gasket
I just got mine and followed your steps exactly. I know you don't have the ZR2 anymore, but did you ever end up having any issues with these over the life of having the truck?
No sir. I never had any issues with them on my red z71 either! If you follow these directions exactly you won’t either
@@HorsePowerObsessed what's the easiest way to get the red safety tab connector off. I popped the tab out, now what is the magic trick to get it to release?
Messing around with it for 10 minutes and really hurting your fingers is the best magic trick that I have found that works…
@@HorsePowerObsessed got it. They look great and hopefully they last with 0 issues for a long time!
Agreed!!!
I like your pressure washer set up!
Thanks!
looking good doc. cant stop staring at those c5 pipes though, if i lived closer i would have to sneak over and fix that.
Thanks! Trust me I've been under there already to fix it and unfortunately the previous owner had it welded and it was welded crooked. This kind of stuff draws me insane so if I could have fixed it it would have already been fixed 🤣 with that said, I may or may not have a borla exhaust on its way... 🤫
poor guy must have been cross eyed. have a borla set of straight pipes on black car sounds good deep tone. they were a little crooked too had to do a little bit of persuading but they came out good.
I have no idea what his issue was but I'm stuck with it until I get a new exhaust
With the silicone, does it matter if it’s kitchen & bath and not the window & door like the one you used?
No. Just make sure it's good for indoor or outdoor and had a long warranty
Hey, I need some help and this is my best chance. The wiring harness, is there 3 or 4 pins on the connection? Lost my running lights and not sure if I lost the pin or there's another issue.
Thanks!
I do believe it’s only 3. Did you seal them up real good like I talked about in this video? If you didn’t, water probably corroded it and that’s why you lost it.
@@HorsePowerObsessed It's on my factory lights. I went the Led bulb route with resistors which were fine for awhile but then lost running lights on the driver side. Brake and turn signals are good.
Took it apart and some minor corrosion. I'm going to try some grease in there which might help. Just looked like a possible 4th pin was broken but couldn't fully tell sadly. I'm going to grease and silicone everything in the future now though thanks to this video tip
Awesome! I’m glad you got it. Happy to help!
just ordered the tail lights! What about smoked black headlights? have any recommendations
Excellent, congrats! I do not have any headlight recommendations, unfortunately. The aftermarket seems to be very very poor quality for headlights in my testing.
Would anyone know if the white wire on these tail lights control the reverse like the original ones do? I want to install a tailgate bar and need to know. Thanks.
This may be a dumb question. But I have the thicker gasket and my third break light. Did you remove the original gasket or did you layer them?
Remove the original one.
@@HorsePowerObsessed thank you for the response. I thought as much. But I just wanted to make sure! Your videos are awesome by the way. A huge part of the decision making when I bought my truck.
Thank you! Any questions you have feel free!
Have you done a muffler mod yet. Like a Magflow or Flow Master?
No. This truck had the GM performance exhaust on it and it is technically a "Corsa" exhaust so it was good.
@@HorsePowerObsessed Nice, I need to check mine.
hey where did you get your fender flares? thats the exact style im looking for.
I know this is an old video but I also know you are still creating other content so I am hoping you will still respond. I am loving your videos for both Colorados. Just got a used 2016 z71 and am going to do some of these mods for sure. I actually got the anti rattle kit on my own without the videos. My question is what silicone sealant do you use?
I appreciate the support! I used all weather silicone from Lowes. Nothing specific just make sure it's all weather and it will last a long time.
@@HorsePowerObsessed Thank you!
Now that it's been a few months, have you had any water leak around the third brake light?
Truck looks awesome! I wanted black, but couldn't locate one close to me. However, picked up a 21 Z71 in the super sexy cherry red. I am working on doing a red/ black theme on it. I absolutely love the lights you've installed here and will look at ordering them! May also nab that ignition ring... I end up jamming my key in there all the freaking time! 😂 Hey, Chevy, why no push button start?! We all want it!
No leaks at all! Shoot me an email when you're ready to purchase the ignition ring and I'll get you hooked up.
@@HorsePowerObsessed Thanks for the reply and Go Pack Go!
Heck yeah!!
How did you manage to disconnect the harness. I’m running into problems disconnecting mine, the tab on my harness is broken.
It wasn't hard, just push the button down and pull it apart but every harness seems to have its issues. Just keep working at it.
The third brake light that you have Linked In the description is not available anymore so I got a different one. It came with a foam seal around it already and I'm wondering do I still need to use the one that you have Linked In the description or will this the enough. I ordered the seal linked In the description it hasn't arrived yet though. I would send a picture but I'm not sure how to do that on here. And if I do need it should I remove the old one and replace it with this one or put the new one over top of the old one?
Can you shoot the link again for the ignition switch bezel your friend developed? I love that.
It was just a 3D print. If you'd like to order one shoot me an email. Horse.Power.Obsessed@gmail.com
@@HorsePowerObsessed will do. Thank you.
does bd also make the black zr2 letters? that would be even better
They make all kinds of colors. Check out the link in the description!
I need part number for third brake gasket
That 3rd brake light is no longer in stock. Can you recommend another one that is smoke colored for a 2022 Chevy Colorado?
Tail lights are currently unavailable both on amazon and do not even show up on the company website.
I wonder if they had too many issues with water?
Shame, I really like these, but living in Vancouver, 100% humidity is a common thing, I'd hate to have water issues
Have you had any issues with the resistors mounted to the housings? Don’t the resistors generate a lot of heat ?
None whatsoever.
@@HorsePowerObsessed good to know ,I ordered a set for my canyon and will be following your waterproofing before they are installed
First thank you for your video's your ZR2 is coming along awesome. I picked up a 2021 Colorado RST in Satin Steel less than two weeks ago, I think it looks great. Other than some emblem changes and Tonneau cover I want to up grade to LED lighting. Lasfit has a complete exterior LED package minus the rear turn signals, so I called them to ask why? They said a few Colorado owners were having error messages on their dash board when changing rear turn signals. Have you heard of this and if you have what do you think can cause this?
Canbus issues can cause errors on the dash but all the LEDs I've done so far have not caused any problems. I, personally, would get aftermarket tail lights versus getting LEDs for the stock tails. The biggest problem is they are going to hyperflash in the rear without wired in resistors if you get LEDs for the stock unit.
Any backup camera issues after all the waterproofing you did?
None.
@@HorsePowerObsessed I didn't waterproof before install and now my camera is going crazy. Do you think if I remove the lights, get them dried out and then waterproof them as you showed that'll solve my problem?
Can u send me the link for the foam gasket for the third brake light thanks
amzn.to/3DYDcsO
Thanks
Did you notice moisture in the lenses after a few days if so how did you fix that
Moisture would get in from time to time but it dries out itself.
I love these smoky lights I just tried to order says these lights don’t fit the Chevy Colorado 2022 Z71? Any recommendations?
Because companies have not updated their info yet to the new models. I'm having the same issue (bought a 2022 ZR2). Because there are no changes from the '21 model I just select the 2021 for now. I pretty sure the Z71 is the same '21/'22 models but you could double check with a dealer
Are these the Spyder brand or the VIPMOTOZ on Amazon? Also, the 3rd brake you you have linked is no longer available, do you know of another that’s similar?
I’ve used both and noticed no difference in quality. Pretty sure they are the same.
Did you have to buy the angle mount and the phone holder from pro clip separate are all together as one?
ProClip sells their kits as 2 pieces. First one is for your specific car and the second one is for your phone.
@@HorsePowerObsessed ❤ thank you I was able to figure it out on the website lol
Hey there my friend just wanted to check and see if your tail lights are still working properly I only ask because I bought a set that were half that price and they did not last more than 2 months I just bought a set of the same ones you got ?
Yes, sir. As long as you’re seal them up, they are good to go!
How has the 3rd brakelight held up for you with water leakage? I bought that light and the same thick gasket as in your description and I have moisture in mine. Just wondering how your is holding up.
No water leakage at all. You have moisture inside the brake light? If so, that's for a different reason than that gasket.
@@HorsePowerObsessed I agree. Love your Colorado videos.
Thank you!
So they are done with the truck and they, located the point of failure. had to replace the trailer brake auxiliary control module so you think that could have been caused by the lights I did the exactly what you did in the vid
Definitely not. The leaky tail lights can sometimes trigger the backup camera to come on but that's the extent of it.
Did you have any issues with battery draining and truck stalling
None at all. That sounds serious.
So they just finished the truck and the trailer brake auxiliary control module was constantly drawing power causing the battery to be depleted so you think it was the tail lights I took them off and put the old ones I did everything you did in this video just wondering what your thoughts are
Looks great w the new tail lights. Got the same tailgate letters for my 21 Z71 in Gloss black. Great product from BD trims. Great content. Please keep the videos coming.
Thank you! I definitely will!
Link in the description does not go to Spyder brand tail lights
I ordered these tail lights for my 2021 Colorado Z71 and they just came today. The outside of the box has this big warning label on it warning that the tail lights are only for car shows and off roading and not to open it unless I know they aren't for regular road use. And then I just noticed it in the description too, which I must have missed before. Are you happy with these? Are they bright enough for road use? I'm nervous to open the box. Thanks.
100% bright enough for daily use. They are far brighter than my stock ones were just like I showed in the video. They only put that kind of stuff on the box to cover themselves but I have had absolutely no problem in my two years of use with my red one and my 3 months of use in the black zr2
@@HorsePowerObsessed Great, thanks! Thank you very much for your quick reply as I wasn't going to install them till I heard back from you. So now I have the LED fog lights, LED headlights, tail lights, inside LED bulbs for dome lights, vanity mirror LED's, black steering wheel bow tie and a new Bedrug to install this weekend. My Z71 isn't a midnight edition but it's close to getting there. Thanks again, enjoy your videos very much.
@@HorsePowerObsessed I also love the black tinted license plate frame. It's one of my favorite mods.
Same here!
Hey Justin amazon says the black third brake light is out of stock is there another one out there like that
None just like this. It should come back in stock soon. If you just want a blacked out one let me know, I can find others that are blacked out just not ones that look just like this.
i just completed my install of the cargo light and the clear tail lights only issue i had is my reverse light on the driver side doesnt work
Interesting. Not a normal issue from my experience.
@@HorsePowerObsessed I'm sure it's just damage from shipping or a manufacturer defect
Very likely.
Will the 3rd tail light that is linked in your video fit a 2021 zr2? Asking because when i clink on the link and then on Amazon it says will not fit my 2021 chevy colorado zr2.
Yes they will. Amazons guide isn’t right usually. It’s a 21 I installed it on here.
Quick question- How has your weatherproofing/sealing for your tail/3rd lights held up since the time you installed them? I am purchasing Spyder tail and Lumen 3rd light for my canyon and all reviews are full of people complaining of corrosion and total dysfunction as early as 3 months - clearly it seems they did not waterproof them. Also, I have called a few professional installers in Houston, TX and they refuse to weather proof/seal the connectors as you describe it in your video because "it's would be way too expensive and time consuming" eventhough their pricing for basic labor is already $150 (without weather proofing or sealing anything).
If you weatherproof like I did here you will be absolutely fine. I have had no issues.
Just curious if you’ve had any problems with the lights since you put them in I got some I did not do the silicone but they start activating my back up camera sometimes and ones totally out got a refund but is it worth getting the same ones and doing this does it work good in the long run?
Without the silicone, they won't last long. Once the water gets in, they are basically trashed. You have to seal up the wires. I had a set for 3 years without any issue after siliconing them.
@@HorsePowerObsessed sounds good thanks for the feedback
Justin, it shows they fit a GMC Canyon, but guys in the Q&A section say not. Would you happen to know? Could there be a fitment issue where a minor bit of work is required?
Are you referring to the tail lights?
@@HorsePowerObsessed Yes sir. I believe the third brake light looks compatible also.
Both will work on the Canyon or Colorado. They are the same setup.
How are these lights holding up because I keep seeing bad reviews on them
If you don't seal them up like I did, they won't last a month. Most people aren't doing that after buying them and they fail.
@@HorsePowerObsessed cool thank you yea there super nice but all had bad reviews so I didn’t know what to do, thank you soo much
@anonymousc8981 you’re very welcome!
Hey Justin What are the LED Bulbs for that are on the towel with the 3rd brake light? FYI It looks like the 3rd light gasket is back in stock...
Hey man. Those are actually switchbacks that I had in my red Colorado.
@@HorsePowerObsessed FYI Just ordered my tinted tail lights and 3rd brake light. Can’t wait. Picking up my silicone after work today
Sweet! You're going to love them! They make such a huge difference on the back of the truck it's insane.
@@HorsePowerObsessed I could tell they look great on the back of your truck. That’s what sold me was finished view of you truck
They really do look great and they are really good quality outside of the fact that they don't have weatherproofed electrical connections.
show the lights at night blinkers,stop and reverse light.
Taillights look amazing! Any issues with them being street legal due to being too dark?
If you click the link he has above for them it'll bring you to Amazon. Mid page it shows this model and one with a clear outside housing which should be street legal
Zero issues. They are insanely bright, much brighter than stock even though they are tinted because the LEDs are just brighter.
Third brake light is no longer available. Do you have any other suggestions?
I don't actually see a lot of options out there right now. Give it a few days and see if those come back in stock.
any issues with any of the trucks electrical components, LED add on lights will sometimes mess with circuit. ? also the electric grease goes on the out side... it creates a seal around the connection. should NOT use it where the metal connector contacts another metal connector.
No issues at all. And dielectric grease definitely goes right in the connection.
ruclips.net/video/w2O6iWvvGx8/видео.html @@HorsePowerObsessed
Literally the definition of dielectric grease: "Dielectric grease helps create extra insulation for electrical connectors, prevents arcing and is ideal for any electrical connections with rubber gaskets."
"So dielectric grease is often found around electrical systems, where it can be used to lubricate connectors, seal gaps, and thwart corrosion by preventing moisture ingress. Better still, dielectric grease can typically withstand extreme heat cycles, which makes it a smart choice to stop plastic and rubber parts from fusing together in high-temperature environments, like, say, in an engine bay."
All of this is to say, put it in the electrical connection with the rubber seals inside. I have been, and everyone I know has been using it this way for years. It's all good. It seals it and helps keep water out as well as aiding against any kind of corrosion on the contacts. Can't say I trust a youtube channel with 700 subs telling me otherwise.
Does the third brake light fit a 2019?
Yes it does!
@@HorsePowerObsessed thanks man
@@HorsePowerObsessed also is there a alternate 3rd brake light seal I could order?
@@HorsePowerObsessed they are unavailable
Does anyone know how to change out the little tiny lights and what kind of bulb to use? My truck says one of mine is about to go out
which lights?
The tiny lights that turn on when you use your turn signal. I had an alert on my truck saying “check right rear turn signal lamp.” I figured it’s the small lights and not the big LED one. Is it replaceable or do I have to buy a whole new set?
not sure if this is true but do the taillights interfere with the backup camera? Could someone bottom line this?
Not at all. Unless water gets into them, then they force the backup camera on. I had them on my red colorado for over 2 years and now my black ZR2 for about 2 months with no issues.
My stock plug is stuck together. I can't get the loom to disconnect
They can be tricky. Keep working on it, you'll get it.
Send me the passenger stock tailight please haha I cracked mine two days ago 😢
Also, great video and that truck is sick dude!
Thanks man! I don’t have my stock tail lights anymore, sorry lol
My buddy purchased these. And they shortaged out fast. Hence snow and ice in Wisconsin is brutal. Re wired the connectors to butt connectors. Everything works except the drivers side is blinking fast. I believe we wired something wrong or the taillights are junk.
Everything else works. I thought maybe a bad bulb somewhere. But no bad bulbs... please help.
I'm having the same problem on the driver's side. Did you ever find a solution to this?
@@christopherkapic the whole thing got smoked. Once water got into it. Salt snow we bought new ones. And we shrink wrapped everything. It worked.
@@brendanmccarthy492 Okay, thank you! I guess I might have to get new ones :(
I can’t figure out how to disconnect taillight clip (the little red clip)
you figure it out? im in the same boat right now its pissing me off lol.
Just gotta slide it back and then you can I clip the connector
My only question is why tf did that company stop making the tail lights like they made then for the 2006s. I almost dont want to buy these cause are not them. But these do seem to be the best i can find out there.
They are great tail lights outside of the fact they aren't weather sealed. If you follow the steps here, though, they will be just as good.
These headlights are known to have electrical issues from the wiring harness - what is your experience with this?
I assume you meant tail lights? The electrical issues you are referring to were taken care of by the steps I did before the install. All of the issues were caused by water leakage and with some silicone, you can fix that issue.
I'm putting a pair on my truck sat I'm handicapped how do u take off facts harnes off old lights put new one on
I can’t find these tail lights on amazon please help
amzn.to/3ADkzrM
Hey if you say it fits my z71 and amazon says it don’t fit I trust you imma buy it
Looks great those of the tail lights I put in I didn't seal them up though maybe I'll take them apart and seal them up thanks for the tip guy. What drives me crazy on mine is the silver lock on the tailgate and door I'm just about to the point where I'm gonna take a sharpie and color mine. If you want to check out my ZR2 I just click on my Facebook page. Call my ZR2 Rockenstein
They really do change the look of the truck! The silver on the tailgate and the drivers door drives me nuts, too.
Sweet
The third break light is horrible. I bought one for my truck and it faded pretty bad.
After how long? I've had this installed for a while no and haven't noticed anything. Did you get the tinted one?
@@HorsePowerObsessed about 3 months it starts to vade to a brown yellow color. No I got the black/clear.
Ok. I think the clear lense is more likely to do this since the black one is tinted pretty heavy. You probably wouldn't notice it with the tinted lense even if it did happen.
@@Turbo_Denali where did you get your 3rd brake light