I was about to disassemble the V7 just like you said you did in the video...but fortunately, saw your video, popped off that little piece that I didn't even know could pop off. Cleaned out the hair and bam! works like a champ again. Cheers!!!
Thanks +Rich Grover. I'm glad it worked out! Feel free to subscribe, I've already got another fix video for this little guy and intend to keep it going for as long as I can. 😆
The most helpful thing on the internet right now! I was just about to drop $20 on a new brush, but thanks to you, I'm back in business. Also, every member of my family (including the baby, and the dog) are going to have shaved heads from here on out.
my apologies for the late response. We have had a baby and moved house. I haven't made a lot of videos in a while but we are getting back to it! :) This sounds verrrry familiar to how we feel. We now have two dogs and a baby and Robo's still going strong! :D
THANK YOU!!!!! I had been very happy with mine since I got it at Christmas... then today it stopped working. Owners manual is useless. I found your first video, which did not fix my problem, but this one did it! Thank you so much, I never would have figured this out on my own. Hair wrapped around the end.
Thanks for the comment @Stephanie Hopper, I'm so glad it worked for you! I will be updating as I need to in order to keep this little vac running for as long as I can! Feel free to subscribe for updates. 😄 Thanks again and happy vacuuming! 👍 -JMW.
Thanks!!! that little piece - I never would have imagined it pops off, had to use something to grab it and take it apart with a little force, cleaned the mess of hairs it had in it, and force it back on (had to hit it on the floor for it to pop back in all the way so the brush could fit back in its place) and it works like a charm! as fast as it was when it was brand new (also cleaned the front wheel, which also pops out of its own housing and is EASILY cleaned FYI everyone). Anyway. thanks again! postponed replacing this great bot for who knows how longer! saved me some money, thumbs up!! :)
Thank you so much for the kind comment, my apologies for the late response. We have had a baby and moved house. I haven't made a lot of videos in a while but we are getting back to it! :) Thanks again and stay safe! :)
@@JMWConceptsTheOfficial I still have the same loyal bot! :) moved apartments and cities and he still cleans up my floors pretty sweet! So thanks again! Be safe and take care!
In my case it took two months to blosk the main brush. I also needed to use tools to remove this "plug" as it need force to remove. Also remove the side brush. Good job , thank you.
Thanks Karol, our little 3-brush wheel has recently snapped all the arms off so we finally need to buy spare parts. I can't believe how long this little guy has lasted so far! :D
Thanks man! My robot was dirty so I opened and cleaned it. Onece I put I back together it backed up and the red light appeared (obvious error). I thought a sensor was dirty (even after my cleaning) but I also checked the roller as per your recommendation. Thought this part does not disassemble. Good catch! Sometimes the easiest solution is at the most obvious place. Cheers!
The end of mine didn't pop off easy I had to use pliers, that's because it was completely caked on. Thank you so much ! You completely saved me, I haven't been able to use it in 8 months because I couldn't figure what was wrong.
Great news! Thanks for letting us know +Chase's TV! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
So glad it helped! I have another video on the same machine so it might be worth subscribing in case you need that one as well. Ours' is still going and I intend to keep it alive as long as possible! :)
My V7s pro was making the 4 beeps error (issue with turbo brush) After watching your video, i removed the yellow cover and it was all cluttered with long hair. Thank you so much !
Great news! Thanks for letting us know! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
Hubby was about to lose hope on our vacuum but fiddled around and took off that small spinning squarish part of the turbo brush and voila! the brush was spinning again! Thanks for this video, it was helpful! Did your vacuum beep 4 times, then turn red? That's what made me indicate it was the turbo brush problem.
So glad you got it going again! I refuse to give up on mine, been going strong over a year with near-on daily use. I can't remember exactly what it was doing to be honest, it did beep and flash, I'm not sure of the sequence. I should have taken more note.. I actually have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
Thank you so much for the kind comment, my apologies for the late response. We have had a baby and moved house. I haven't made a lot of videos in a while but we are getting back to it! :) Our little 3-brush wheel has recently snapped all the arms off so we finally need to buy spare parts. I can't believe how long this little guy has lasted so far! :D
Great news! Thanks for letting us know! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
Omg big thank you! I was about to throw my vaccum away! I have the V7 and that was the problem. The little part was verry hard to pull out , there was too much hairs.
Hey +Cindy L! Thanks for the comment, I'm so glad we could help. I have a couple more fix videos and I intend to keep this little guy going for as long as I can so feel free to subscribe for future updates. :)
So glad we could help +10footyater. I have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
Hi, mine was hardly moving, managed to clean it, but it still does not spin. I guess also the little hole in the cleaner itself, where you put the second part of the brush you fiddle with (so on the video it would be on the left) should spin, but mine doesn't. However I am really struggling to take it apart to clean it. do you know how? thanks
This may sound silly, but is the vacuum itself switched on? They have a small switch on the bottom of the back right side of the vacuum itself, the vacuum will still charge when switched off but won't actually work. Let us know! :)
I'm glad it helped Ahmad, I have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
I have a clon (Conga Excellence). The anti-collision sensors does not work. It works only the first ten seconds. Anobody knows what is the problem? Should I do a hard reset? How?
I'm sorry, I haven't had this problem. You could try take the cover off, running it until the sensor stops working and then checking to see if anything is heating up and shutting off?
Hey, quick question, my robot has been making squeaky sounds, but only when it touches some surface and reverses or corrects course. Going forward, no squeaking but whenever it goes back, it squeaks. Is there anything I can try to fix it? Thank you for the help!
Thanks +Chris, glad we could help. I have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
You! You are my hero! 3 hours trying to solve the problem without any success. Later You pointed out this little thing and I found about 1kg (maybe less 😀) of hairs in this place. Now is the vacoom sound back in normal. And thans to Chris too :)
My roller is now difficult to put it back into the slots. It appears that it is 1 cm longer. How did you take out the end on the moving side of the roller? I had push hard to put it into the slots and afterwards it doesn't roll or move freely
Hi Murali, which roller do you mean? The carpet brush or the little wheel at the front? If it is the front wheel, check there is nothing trapped in there, hair or string or anything. If it is the carpet brush that you mean, there is a little square fitting on the brush that slips into a square housing inside the vacuum. It should not be hard to get back in at all, you shouldn't need to push. If you turn the vac upside down with front of it pointing away from you, take the yellow cover off the carpet brush. On the left end of the brush, there is a square axel part that does not come off the vacuum. On the other side, there is another square that can pop off for cleaning. When replacing, fit the left side back into the square hole, and the right side should slip straight in. I hope this helps! Please gimme a thumb up and subscribe for more if it helps! :)
Thanks for the help. I did too have problem to take off the part where the hair was. But it whent off smoothly wiht a pincer. Thought the cleaner already was done for :( Do you, by the way, experience the water tank dripping. I thought it wouldn't becouse of the hose in the tank?! Or am I missing something?
Hi Mooy0021, I'm glad we got it back going again for you! I have another fix video on the channel and will upload updated repairs as I need to them. Feel free to subscribe for more! Yes my machine also leaks from the water bottle when it is in which is part of the reason I rarely use the mopping. The good news is that this is fixed on the new model but it doesn't help us with the original one! I will be contacting Chuwi to find out if there is a part we can fit to stop the leaking and I'll let you know. Thanks and happy (lazy) vacuuming!
That sounds great. But I bought mine for like a month ago, which is the newer model? Does it have the same name or is it a complitly new machine model?
My V7s pro has one wheel that goes at normal speed and one that goes very slow. The result is that my V7 runs around in circles and if it encounters an obstacle it just slams into it, violent backing up and than shutting down. I've tried to clean everything like in your videos, but it didn't work. I now am wondering if I should just replace the slow turning wheel or the front sensors? Any other suggestions or solutions I can try?
Hi Kristof, I haven't had that problem myself(yet!). If you have cleaned everything, wiped down the sensors etc then I'd consider the wheels themselves. If you spin them by hand, do they both have the same resistance or is one harder to turn than the other? I had a quick look around and this looks like it could be helpful.. Keep up posted. I would like to know how you go. Good luck. www.ifixit.com/Answers/View/127591/Vacuum+will+not+go+straight
Darn, sorry +Aubrey. What is your robot doing or not doing? Did you see the other fix video? You can see it here, hopefully we can get it going again! ruclips.net/video/4xQngc5YG0I/видео.html
I watched that one first, and then came to this one. It’s just spinning, backing up and stopping. Removed wheels, bumper, cleaned brushes and axels, sensors... I’ll try it all again to see if I missed anything.
If you've checked all of those things and there's nothing trapped or wedged in any of the moving parts, stopping it, I'd begin to think one of the sensors may be faulty. Normally when they go forward a small bit then backing up and stopping, something is creating drag. It means then robot is working too hard. Maybe try covering the drop sensors and pushing down the lift sensor, then trying to get it to run. See if both wheels turn properly. How annoying! Good luck! :)
Hi, thanks for the fix! I seem to struggle with the exact same thing. Just one question - how did you remove that part of the turbo brush that should be rotating freely? Mine is hardly rotating and I can´t manage to get it off the brush without potentially breaking the darn thing altogether... :/
Hi +juutuubpunktkomm, sorry for the late response. Do you mean the part I am fiddling with at 4.25? That should just pop straight off. If it doesn't there may be a build up of hair or something holding it on. Alternatively, if you have used the mop function a lot, there may be a CHANCE it may be rusted in place but I would doubt this. Let me know if you can't figure it out and I'll use my machine to try and work out what the problem may be. 😊 -JMW.
I'm having the same problem. That little part won't budge. My vacuum turns on and acts like it's working normally, but the brush doesn't turn. It ends up just pushing dirt around the floor.
Super glad it worked out for you +Bjarni! Feel free to like and subscribe for future updates. I've had this guy running almost daily for nearly 18 months now and I intend to keep it alive for as lonnnng as possible. :D ;)
So glad we could help +dsezra! Feel free to subscribe, I have another fix video and I intend to keep this little guy running for as long as possible. ;) :)
Hi Lasse, sorry for the bad news but the wheels are extremely difficult to remove and will require some serious disassembly. I haven't found an easy way to get them out. Is one not turning?
Damm.. :( yeah it seems like one is not running on the motor, like it has been detached, maybe from a gear or something like that, if I try and spinn it manually, it dosent have resistance, :(
Hey guys, a lot of you guys have been kind enough to let me know that this has helped you fix your vacuum however there are more dislikes than likes on the video! If this did help you, please click the thumb up button and subscribe for updates. Thanks all! -JMW.
Great news! Thanks for letting us know! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
I was about to disassemble the V7 just like you said you did in the video...but fortunately, saw your video, popped off that little piece that I didn't even know could pop off. Cleaned out the hair and bam! works like a champ again. Cheers!!!
Thanks +Rich Grover. I'm glad it worked out! Feel free to subscribe, I've already got another fix video for this little guy and intend to keep it going for as long as I can. 😆
The most helpful thing on the internet right now! I was just about to drop $20 on a new brush, but thanks to you, I'm back in business. Also, every member of my family (including the baby, and the dog) are going to have shaved heads from here on out.
my apologies for the late response. We have had a baby and moved house. I haven't made a lot of videos in a while but we are getting back to it! :)
This sounds verrrry familiar to how we feel. We now have two dogs and a baby and Robo's still going strong! :D
THANK YOU!!!!! I had been very happy with mine since I got it at Christmas... then today it stopped working. Owners manual is useless. I found your first video, which did not fix my problem, but this one did it! Thank you so much, I never would have figured this out on my own. Hair wrapped around the end.
Thanks for the comment @Stephanie Hopper, I'm so glad it worked for you! I will be updating as I need to in order to keep this little vac running for as long as I can! Feel free to subscribe for updates. 😄
Thanks again and happy vacuuming! 👍
-JMW.
Thanks!!! that little piece - I never would have imagined it pops off, had to use something to grab it and take it apart with a little force, cleaned the mess of hairs it had in it, and force it back on (had to hit it on the floor for it to pop back in all the way so the brush could fit back in its place) and it works like a charm! as fast as it was when it was brand new (also cleaned the front wheel, which also pops out of its own housing and is EASILY cleaned FYI everyone).
Anyway. thanks again! postponed replacing this great bot for who knows how longer! saved me some money, thumbs up!! :)
Thank you so much for the kind comment, my apologies for the late response. We have had a baby and moved house. I haven't made a lot of videos in a while but we are getting back to it! :)
Thanks again and stay safe! :)
@@JMWConceptsTheOfficial I still have the same loyal bot! :) moved apartments and cities and he still cleans up my floors pretty sweet! So thanks again! Be safe and take care!
We love this little guy, he's been with us for YEARS now and I intend to keep him alive as long as possible! :D
So you actually saved my sanity in a Sunday evening. I can not believe it was that small a piece 🤦♂️🤦♂️🤦♂️🤦♂️
THANK YOU!
In my case it took two months to blosk the main brush. I also needed to use tools to remove this "plug" as it need force to remove. Also remove the side brush. Good job , thank you.
Thanks Karol, our little 3-brush wheel has recently snapped all the arms off so we finally need to buy spare parts. I can't believe how long this little guy has lasted so far! :D
Thanks man! My robot was dirty so I opened and cleaned it. Onece I put I back together it backed up and the red light appeared (obvious error). I thought a sensor was dirty (even after my cleaning) but I also checked the roller as per your recommendation. Thought this part does not disassemble. Good catch! Sometimes the easiest solution is at the most obvious place. Cheers!
BINGO! after years and years and years, you can imagine the junk I found in there! THANK YOU THANK YOU THANK YOU
It disgustingly surprising isn't it? :P
Thanks for the 4:40 things. You saved my life (and my living room).
Thank you! This is exactly what was wrong with mine - works perfectly now! Thank you thank you - Dustin Beiber is alive againnnn
The end of mine didn't pop off easy I had to use pliers, that's because it was completely caked on. Thank you so much ! You completely saved me, I haven't been able to use it in 8 months because I couldn't figure what was wrong.
Great news! Thanks for letting us know +Chase's TV! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
Same for me!
Thank you! Your video saved my day : i didn’t have to take my robot to service. :)
Helped a lot for a while! But now it's really not working?? Further cleaning advice??
Same issue. Fixed! Thanks for posting this video!
So glad it helped! I have another video on the same machine so it might be worth subscribing in case you need that one as well. Ours' is still going and I intend to keep it alive as long as possible! :)
My V7s pro was making the 4 beeps error (issue with turbo brush)
After watching your video, i removed the yellow cover and it was all cluttered with long hair. Thank you so much !
Thanks Alexandre! I have a few more fix videos so feel free to subscribe in case you need us again. 😉👍🏻
WoW thanks!!! Couldn’t figured out what was the problem!!!
thank you so much! you saved my robot's life :)
I was starting to lose hope...
Great news! Thanks for letting us know! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
Hubby was about to lose hope on our vacuum but fiddled around and took off that small spinning squarish part of the turbo brush and voila! the brush was spinning again! Thanks for this video, it was helpful!
Did your vacuum beep 4 times, then turn red? That's what made me indicate it was the turbo brush problem.
So glad you got it going again! I refuse to give up on mine, been going strong over a year with near-on daily use.
I can't remember exactly what it was doing to be honest, it did beep and flash, I'm not sure of the sequence. I should have taken more note..
I actually have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
You´re a genius man! Thanks help a lot here!
So glad it worked out! We have another fix video and I'll soon be doing an update on how the robot is going a few years later. ;)
Thank you so much
Thank you so much for this video!!! I was finally able to fix my vacuum!
Thank you so much for the kind comment, my apologies for the late response. We have had a baby and moved house. I haven't made a lot of videos in a while but we are getting back to it! :) Our little 3-brush wheel has recently snapped all the arms off so we finally need to buy spare parts. I can't believe how long this little guy has lasted so far! :D
Thank you so much for this advice! It solved my problem. And saved my robot!
Thanx alot. this helps me after 1hour of looking for hair
Great news! Thanks for letting us know! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
Omg big thank you! I was about to throw my vaccum away! I have the V7 and that was the problem. The little part was verry hard to pull out , there was too much hairs.
Hey +Cindy L! Thanks for the comment, I'm so glad we could help. I have a couple more fix videos and I intend to keep this little guy going for as long as I can so feel free to subscribe for future updates. :)
mine vaccum cleaner just moves backwards, please help
Hi the irobot was working fine for 2 days and now all of the sudden it's jumping like crazy any way to fix this plzzz
It works now THANK YOU 💕
YESSS! So glad it worked out! We have another fix video and I'll soon be doing an update on how the robot is going a few years later. ;)
this fixed our problem ... much thanks ...
So glad we could help +10footyater. I have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
Thank you very much - I cleaned it and it fixed it! :-)
Awesome! So glad it worked out! We have another fix video and I'll soon be doing an update on how the robot is going a few years later. ;)
Thanks this fixed my probelm!
I'm so glad +DjSkybass! Feel free to subscribe as I intend to keep this little bad boy going for as long as possible! ;) :)
Hi, mine was hardly moving, managed to clean it, but it still does not spin. I guess also the little hole in the cleaner itself, where you put the second part of the brush you fiddle with (so on the video it would be on the left) should spin, but mine doesn't. However I am really struggling to take it apart to clean it. do you know how? thanks
Ha... this turkey`ll fly
Nice... roller brush end cap... 🙏🏽
Damn it. My robot says clean and I can’t figure it out, I tired cleaning everything…
Dude :) thanks a lot it did help me to repair mine :)
So glad we could help! :)
Please kindly help me, my robot is not working now . When it is charging it has green button but when I try to run it , button is not active
Hi +Olya zimina, does it work with the remote controller? :)
JMW Concepts no
This may sound silly, but is the vacuum itself switched on? They have a small switch on the bottom of the back right side of the vacuum itself, the vacuum will still charge when switched off but won't actually work. Let us know! :)
Very helpful
Thanks a million
I'm glad it helped Ahmad, I have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
I have a clon (Conga Excellence). The anti-collision sensors does not work. It works only the first ten seconds. Anobody knows what is the problem? Should I do a hard reset? How?
I'm sorry, I haven't had this problem. You could try take the cover off, running it until the sensor stops working and then checking to see if anything is heating up and shutting off?
Hey, quick question, my robot has been making squeaky sounds, but only when it touches some surface and reverses or corrects course. Going forward, no squeaking but whenever it goes back, it squeaks. Is there anything I can try to fix it? Thank you for the help!
Did you get this sorted?
@@JMWConceptsTheOfficial nope, not yet.
Mine too.. Any solution yet?
The thing at 4:40 is very usefull, thanks :)
Thanks +Chris, glad we could help. I have another fix video and I intend to keep fixing any problem that arises so feel free to subscribe for future updates. :)
You! You are my hero! 3 hours trying to solve the problem without any success. Later You pointed out this little thing and I found about 1kg (maybe less 😀) of hairs in this place. Now is the vacoom sound back in normal.
And thans to Chris too :)
Hey, how do you get that little piece out? I've been trying, without success
My roller is now difficult to put it back into the slots. It appears that it is 1 cm longer. How did you take out the end on the moving side of the roller? I had push hard to put it into the slots and afterwards it doesn't roll or move freely
Hi Murali, which roller do you mean? The carpet brush or the little wheel at the front? If it is the front wheel, check there is nothing trapped in there, hair or string or anything.
If it is the carpet brush that you mean, there is a little square fitting on the brush that slips into a square housing inside the vacuum. It should not be hard to get back in at all, you shouldn't need to push. If you turn the vac upside down with front of it pointing away from you, take the yellow cover off the carpet brush. On the left end of the brush, there is a square axel part that does not come off the vacuum. On the other side, there is another square that can pop off for cleaning. When replacing, fit the left side back into the square hole, and the right side should slip straight in.
I hope this helps!
Please gimme a thumb up and subscribe for more if it helps! :)
Thanks for the help. I did too have problem to take off the part where the hair was. But it whent off smoothly wiht a pincer. Thought the cleaner already was done for :( Do you, by the way, experience the water tank dripping. I thought it wouldn't becouse of the hose in the tank?! Or am I missing something?
Hi Mooy0021, I'm glad we got it back going again for you! I have another fix video on the channel and will upload updated repairs as I need to them. Feel free to subscribe for more!
Yes my machine also leaks from the water bottle when it is in which is part of the reason I rarely use the mopping. The good news is that this is fixed on the new model but it doesn't help us with the original one!
I will be contacting Chuwi to find out if there is a part we can fit to stop the leaking and I'll let you know.
Thanks and happy (lazy) vacuuming!
That sounds great. But I bought mine for like a month ago, which is the newer model? Does it have the same name or is it a complitly new machine model?
My V7s pro has one wheel that goes at normal speed and one that goes very slow. The result is that my V7 runs around in circles and if it encounters an obstacle it just slams into it, violent backing up and than shutting down. I've tried to clean everything like in your videos, but it didn't work. I now am wondering if I should just replace the slow turning wheel or the front sensors? Any other suggestions or solutions I can try?
Hi Kristof,
I haven't had that problem myself(yet!).
If you have cleaned everything, wiped down the sensors etc then I'd consider the wheels themselves. If you spin them by hand, do they both have the same resistance or is one harder to turn than the other?
I had a quick look around and this looks like it could be helpful.. Keep up posted. I would like to know how you go. Good luck.
www.ifixit.com/Answers/View/127591/Vacuum+will+not+go+straight
Lo conseguí ya funciona perfectamente, gracias a tu vídeo
Me a sido de gran ayuda muchas gracias
Estoy tan contenta de que pudiéramos ayudar.
Gracias por las amables palabras. :)
Thanks for the vid-helpful, but didn’t solve our problem yet. :(
Darn, sorry +Aubrey. What is your robot doing or not doing? Did you see the other fix video? You can see it here, hopefully we can get it going again!
ruclips.net/video/4xQngc5YG0I/видео.html
I watched that one first, and then came to this one. It’s just spinning, backing up and stopping. Removed wheels, bumper, cleaned brushes and axels, sensors... I’ll try it all again to see if I missed anything.
If you've checked all of those things and there's nothing trapped or wedged in any of the moving parts, stopping it, I'd begin to think one of the sensors may be faulty. Normally when they go forward a small bit then backing up and stopping, something is creating drag. It means then robot is working too hard. Maybe try covering the drop sensors and pushing down the lift sensor, then trying to get it to run. See if both wheels turn properly.
How annoying!
Good luck! :)
Não resolveu o nosso problema. Vi o primeiro e o segundo vídeo
Hi, thanks for the fix! I seem to struggle with the exact same thing. Just one question - how did you remove that part of the turbo brush that should be rotating freely? Mine is hardly rotating and I can´t manage to get it off the brush without potentially breaking the darn thing altogether... :/
Hi +juutuubpunktkomm, sorry for the late response. Do you mean the part I am fiddling with at 4.25? That should just pop straight off. If it doesn't there may be a build up of hair or something holding it on. Alternatively, if you have used the mop function a lot, there may be a CHANCE it may be rusted in place but I would doubt this. Let me know if you can't figure it out and I'll use my machine to try and work out what the problem may be. 😊
-JMW.
I'm having the same problem. That little part won't budge. My vacuum turns on and acts like it's working normally, but the brush doesn't turn. It ends up just pushing dirt around the floor.
Thanks man!
btw I had to Restart for the fix to work!
Super glad it worked out for you +Bjarni! Feel free to like and subscribe for future updates. I've had this guy running almost daily for nearly 18 months now and I intend to keep it alive for as lonnnng as possible. :D ;)
You saved my robot
So glad we could help +dsezra! Feel free to subscribe, I have another fix video and I intend to keep this little guy running for as long as possible. ;) :)
Não entendo inglês, teria o vídeo em português?
Desculpe pela resposta tardia, você conseguiu?
how do you remove the wheels on this machine. one of my wheels seems to be broken
Hi Lasse, sorry for the bad news but the wheels are extremely difficult to remove and will require some serious disassembly. I haven't found an easy way to get them out.
Is one not turning?
Damm.. :(
yeah it seems like one is not running on the motor, like it has been detached, maybe from a gear or something like that, if I try and spinn it manually, it dosent have resistance, :(
Hello again, I went all on on the repair, and all went well, its though a temporary fix, so have ordred a new wheel. :)
Hey guys, a lot of you guys have been kind enough to let me know that this has helped you fix your vacuum however there are more dislikes than likes on the video! If this did help you, please click the thumb up button and subscribe for updates.
Thanks all!
-JMW.
JMW Concepts
I took the front of mine off. wiped it off and it's going forward again.
Great news! Thanks for letting us know! I have another fix video and I intend to keep this little guy going for as long as possible so feel free to subscribe for future updates. :)
Great!
hard to hear you over the music - ugh
Sorry!
Talk way too much and dont show NOTHING
Sorry mate. Did you see our other video on the same vac? Maybe that one shows your problem?