1/14 RC Hydraulic Bulldozer Earth Dozer DXR2 RC4WD - Unboxing, Setup and Programming
HTML-код
- Опубликовано: 30 сен 2024
- The huge DXR2 bulldozer from RC4WD! In this video I unbox the machine and go through programming the radio for easier operation.
My email: jacobsenra@hotmail.com
My Website: hobbyconcepts....
My Facebook Page: / hobbyconcepts-20961911...
RC4WD Dozer: store.rc4wd.co...
Wells Fargo: Hello Mr. Christianson, your mortgage is late, may I ask why?
ME: It's Bob at Hobbyconcepts fault.
Thank you bob for this awesome video, I enjoy every second of it. Rc4wd should hire you to program all their heavy equipments . Nobody knows mixing better than you do. Keep on the good work.
Dude you explain things so incredibly well! It's nicely detailed but not overwhelming to us newbies. Your voice is really calming as well haha! Thank you so much!
Thank you so much for making this tutorial I finally have my dozer working correctly now, You make it very easy and straight forward! Great channel
It is rather incomplete, switching connectors on the receiver should be shown, where the connectors in #3,4 will go? One of mine ESC's is plugged in the sound unit, how would that work?
Thanks for clarifying this.
Just guessing because I have not seen one of the factory sound systems but I assume one speed control plugs into the sound system and then that sound system plugs into the receiver. Problem with that system is that the sound only follows one track. In any case the way I programmed is that the left track speed control plugs into channel 3 and the right track speed control plugs into channel 4. Whichever speed control is plugged into the sound unit would stay there and the sound unit for that track would plug into whichever channel that speed control would have been plugged into. The radio must have the newest firmware updates that gives it 4 mixes. Again not having seen one of those sound systems this is a guess. If you want further information email me (my email is in the video description) and send several high quality pictures of how everything is plugged in.
@@HobbyconceptsLLC Hi, DO you still have pictures of the wiring to receiver, for drx 2
Definitely next year u just sold it to me amazing detail great set up too be it’s amazing to play with
my old toysRus bulldozer still works today
Just pasta and very dry sand it pushes 🤣
It’s amazing just to look at 😮
Thanks for the video. Sure helped me set my dozer up.
Thank You very much for this lerning video. It was so clear to understand mixing channel options. So where did You find battery and charger, because in ebay all selling models are without batteyr and charger. i\It is required 3s 11.1 v Li-Po battery but capacuty is unnown to last more as it possible for this heavy machine. I also wnated to know how long does it last the 5000 Mah battery? What charger do You use?
Also it would appear it got shipped with firmware 1.02 Jan 2018. Should I update to the latest 2020 V2.0.0.68? If I do, will I lose all my settings?
Thanks the programming help new dozer works much better.
Not sure where the rc shop here in northern Alberta Canada got it.
I believe supplier in China.
Took 1.1/2 months to come in.
Supposed to be new version came with lights and sound installed.
Same backwards upside down programming.
The pump ch5 slaved to blade and ripper very slow and weak.
I checked the endpoint on ch5 it was preset at 60percent.
I bumped it to 80 didn’t make much gain.
And then seem like pump was running to hard when turned on.
So I backed it off to 70.
Any thoughts on more program tips on these machines and radios like which better setting for trim sub trim or trim?
I have a question. I followed the instructions perfectly, but when I go forward, the dozer turns. And when I turn, it goes straight. Which makes no sense. So I set channel 4 back to normal instead of reverse, and it appears to have fixed it. Is it possible that the right track, or track 4 was wired in reverse at the factory? I still need to try it properly on the ground.
Hi, cool ass info very helpful...
What a thoroughly excellent video! I don't know if it was intentional or coincidental, but a real Cat D10T is set up exactly as you have done, where the driving is controlled by the left joystick, and the blade movements are controlled by the right one. I'm going to set up my DXR2 just this way. Thanks!
Nice Dozer! I've never used hydraulic rc vehicles before. Are they reliable and are they complicated to maintain etc? thanks
@19:08 Not super familiar with this brand of Remote ( or rather the OS running on it ) since I'm more of a former -OpenTX- / current *_EdgeTX_* person.
Maybe it's because of the slow reaction time of the screen but it looks like CH5 is _proportionally_ tied to CH1/2? Obviously if you don't crank the Stick of CH1/2 to the max then CH5 won't run at full power either ( as compared to manually triggering it ). Does the OS support the ability to crank CH5 to its MAX value regardless of CH1/2's position ( well obviously only once they come out of their dead zones )? 🤔
Doing it like that is how I'd probably set it up on my *_FrSky_*_ Horus X12S_
Mr.bob good evening 🙏 sir! I have a question 🤔 about the hydraulic pump! Can you set up your endpoints to 50 to 100% to make your hydraulic functions operate alittle faster???? Without running the pump????
Ok. I know this is model world we are talking about LOL! Though in real world Dozer operation the turning that you are implying programing into your Toy! Is not even in any case the way a modern dozer and even old iron like a dresser td25 turn they speed up the outer track or slow the inner track moving forward, Reason is to not loose power in a push turn situation! F.Y.I Thank me! LOL.....
what sucks about rc bulldozers and stuff is that you either can pay $20, or $2,200, extremely high end, or cheap garbage, no in between...
Thanks for sharing your programing knowledge!! I just installed the Servonaut M211 speed controller in mine but it's great for people to know it's not required. You are growing quite the collection!! My next big one is going to be the 360L for sure.
That 360L is really nice!
@@HobbyconceptsLLC are there any Stickers of Cat?
What all extremely did you have buy with the 1/14 Scale DXR2 Hydraulic Earth Dozer? I want to know cause I want to buy one
Dumb question here, im buying the batteries separately for mine andbi dont know what style plug end i need to go with the provided end on the dozer? Thank you
Nice machine, my friend has this dozer, he like very much! I have video on my RUclips chanel!
I trying to figure out changing speed controller wiring so both tracks work off left stick I’ve followed your instructions on the controller. But now stuck with what wires to change.
Hello, I am new to all this. I would love to get a dozer and a grader. Am I out of line asking the cost to get into the hobby. Remember I know nothing.
A real piece of equipment controlls are up for down and back for up so that’s correct anyways. Lol
So which ones are the speed controls extreme detail but default at the most important part which ones are the speed controls…
Is it cold proof or water resistant?? Thinking of plowing show from the inside of my house with it. Seriously…
Those are beast dozers..dig the ground up like a champ!
You may see the same model dozer working hard in my channel
I tool heavy equipment to work dozens like my grandfather but there is no work in my home town area for such so I'm gonna have to get something like this
Yeah it should have definitely been mixed like that out of the box. It's the only way that makes any sense.
This is nice but not worth the price, it's 3000 euro in germany.
Going to need a cupule more stimulus checks before I can do one of these
THANKS. Your channel is very informative and entertaining. Can't wait to watch your content. Don't even own any of the things you show. Way out of my skill level and price range.
would like to purchase some products are you going to sell to australia
friend, I've been trying to configure the address of my bruder d11 for months, I did it for me and I did not know how to do the mix of the directional controls and adjustments well and you have clarified my ideas and saved my skin, I thank you a thousand for your tutorial and That you know you have one more subscriber and a new fan, I send you greetings from Malaga Spain, strong hugs friend
Love your videos Bob especially those grand hauliers ones and tech advice and your knowledge well presented as always.thats a monster get that on a trailer haha tc be safe
Thanks! Actually hope to have a trailer for it soon.
Mr.BoB strikes again! Beautiful video! That's insane 😳 👏
Hey Bob were where you 3 year's ago. I could have save some money. There was nobody doing this at all.
Great video again Bob.. I just wish I could afford one myself.!
I have one there awesome!
I kinda want to get my hands on one of these, a Toyan inline twin, and combining the two. I just wonder if I can find hydraulic motors small enough to drive the tracks with. If I can, I'm thinking the engine will be attached to a helicopter governor and set to either idle or maintain a given speed, be belted to the hydraulic pump, and then everything else on the machine is run hydraulically.
great machine... I love using it. It moves dirt like says it does with no problem.
Wow super cool. You do an amazing job! Thanks for you time and knowledge!
Thank you very much for your good explanations, it works well on my trax
Love your videos! Thanks! As Allways very informative!
What type of oil do you use and where do I buy it from?
Just purchased one for my birthday, do you have first start procedure? And can you by oil for hyd system at lower price?
Best jon
I get my Hyd oil at O'Rilley auto parts. A gallon lasts literally forever.
Bob does it come with a speaker already installed. Thinking of installing Beier SFR-1
It has a small speaker under the cab but the sound is poor. I replaced one with a Beier speaker and box behind the grill for a huge improvement in sound quality.
Great video it helped me out thank you!
Just ordered one. The one stick drive is mint
want to order one. can u pls give me specs?
Warming the oil helps.
Beautiful Dozer😍👍👍👍💯
That is one beast of an RC thank you Bob for posting this
Thanks you for this I will do the same om my dozer
It really does make it much nicer to run.
Another great video 👌🏽🤙🏽
You just deactivated a function? Is this supposed to be okay? This one now only can turn with both tracks, which is somwthing that no one wants.
That's rolling weight
You need to check the bolts on the drive sprockets mine were loose
I put a light kit in mine it was a real pain to do but worth it
Working on lights now and it is a pain. I will check the sprockets, thanks for the tip!
Thanks Bob you just did everything i wanted to do to my dozer and was not surre how to it . Love the video's
Excellent!
What a beast. Great video thanks for the info.
Damn that thing is so expensive. 👀
Sure would be great to have Gary Conley join the chat here. Imagine how the wife would react to the sweet smell of real, DEFless miniature turbodiesel CAT INDOORS on a cold morning.
Thank you Bob, I have two of these dozers we use on our float for parades. I was just about to install Sabertooth motor controllers to enable on stick travel operation, I will try the mixing. I also had tried to mix the pump to the hydraulic operation, but not the way you demonstrated. So, that is today's exercise. One note: if you want to run this for several hours, you may want to open the final drive cap and loctite the screws holding the drive cap and the internal plate that has countersunk screws. That failed on one of our dozers and it destroyed the final drive planetary. Had to buy two replacement final drives from Eagle and that was a $500 repair. Also, there is a guy in Austalia that tig welds up new blades that are correct for this dozer. He also builds the correct handrails.
Thank for the heads up! I will check my screws right away. Yes the mixing is great and saves you from having to purchase a new esc.
@@HobbyconceptsLLC You are welcome. I have sent you an email.
All full size Bulldozers use forward for down and backwards for up on the controls.
I don’t believe I could have worked out how to change those controls around. Good on you.
Wow its amazing i love it !!
where do you buy these at
Can you tell me what kind of Hydraulic Fluid you use for the small RC equipment. I cannot find anywhere what kind or where to get from.
I just use Hyd Oil purchased at O'Rilley Auto Parts.
Perfect thank you@@HobbyconceptsLLC
Great stuff.
Love your vids like how you show how to program the controller to make it better to operate even though i will never be able to afford things like this I would cut of both legs for this dozer and a excavator..... I've been watching videos like this for awhile I just sit here and drool ...... 👍👍👍👍👍👍
Has anyone used this to plow snow and operate in very cold conditions?
I probably would not. Just would not want it to get that wet myself.
Nice to your video
That thing is a beast
Thanks for this well put together video with the DXR2 Dozer, yes I hated the way it came programed with each track on separate sticks, very hard to operate. I found your video very easy to understand how to reprogram it so it works like the real deal? After doing that I wanted to use my new Radiomaster TX16S open TX radio and this helped a lot for the mixing, BUT with an open TX system the mixing is way more complex because you can do so much more with and Radio using Open TX system. You know I would like to see a video using an open TX system and programming to work with the Beier Sound module USM-RC-2, especially using a rotary knob to control the module volume??
Years back IMC out of Tennessee or Kentucky was supposed to build a 1/16th RC Cat D11N with a gasoline V4 engine, but they took orders and allot peoples money and then went bankrupt. Would have been an amazing machine and has never been copied.
Yes sir that's on my list
hi bob . i have a GT light system pro euro version. wen connected i only have steering everything works on the rite stick . but throttle wont set up . shift servo is moving on the left side but not the throttle. iv tryed 2 different control's but still the same thing is happening. i set up just like you did on your GT pro . and one side worked but not the other side only one of the channels connected on the left an thats the shift servo . is there anything im doing wrong . its doing my head in so much . that i nearly want to go buy the mfc 03
Any plans on doing a review on the Rc4wd wheel loader? Bulldozer and excavator are great thank you!
A little custom metal working and a cordless mower, you could mow the yard from inside the house. I think this is the first time I have seen someone try and tow a car with one.
買うにはどうしたら良いのですか？
Nice one Bob!
Thanks for your hreat tutorial Bob its really helpful and I appreciated you're a legend.Cheers
I want this
Hello this video its amazing i like this, but i have a question this bulldozer is a similar scale a d10t or d9l in real machine ?
I changed out the esc and put in a sabertooth esc and installed a radiator with fan for the hydraulics. I have this dozer about 4 year's and still have fun with it.
Хочу эту модель.
just got mine and I'm new to this, I have 2 switches inside the battery compartment. What are they for?
Those are on/off switches for each speed control. They stay on. Unplug the battery to turn off.
@@HobbyconceptsLLC Thank you!
amazing model!
Hi Bob, is this dozer also available cheaper, for example as a kit? Thank you and stay healthy.
Not that I have seen. RC4WD is the place for the U.S. and so far I have gotten excellent service from them.
Missing your videos Bob, hope all is well. Take care.
I wish that you would become a dealer with these bulldozers.
Best video on operating it! Is this from Grumalu?
Lol how do they get away with Cat copywrite. Cos thats a Cat dozer🤣🤣
I just ordered one of these and online it shows optional parts as the light kit and speaker does it come with it already from rc4wd?
Mine had a speaker in it but no lights. The sound quality of the speaker is poor so I plan to replace it with a Beier speaker.
Where do you get the little hex screw tool?? and what size is it??
Comes with the machine.
@@HobbyconceptsLLC does it fit the hub so you can take the planetary gear out? And what size is it?
Hi, Im looking for a King Hauler, can you help? How many separate parts do I need for a king hauler. Is it even still a good choice? I know that I need an electronic speed control, but it's discontinued, is there a replacement? What Servo do you recommend? What controller should I get? What battery and charger should I get? is there a semi truck that is less work, like all the "parts" that come with it. Or something less complicated?
Just go here to look: hobbyconcepts.net/
If you have questions my email is in the video description.
You’re awesome Bob!I just received my D9 and my 360 and my dumper from RC4WD all at the same time. A lot of work to do! I noticed that I had to flush The system.There was a lot of metal shavings. ordered a filter,oil cooler,lights. Do they make stainless steel tracks for the dozer?
CSMI in Australia makes Dozer hop ups.
I used your video to set my dozer up the same way you did I love how it operates however first run about ten minutes in my driver side motor stopped running, I unplugged it for a few minutes and tried again it ran for a few minutes then shut down again. I went back and fourth with rc4wd for 3 months trying to resolve the issue settled on a replacement motor. I put it in it ran great for about two batteries then the other side did the same thing instead of dealing with rc4wd I’m looking at upgrading the motors do you have any suggestions or maybe something I overlooked? I set it up exactly like you showed in the video thanks.
I had a dozer motor fail also. Those motors take a real beating in the dozer as a lot of load on them. CSMI makes a brushless upgrade, you might want to look at that.
I will never own that machine only because there is no way I would want to hear that hydraulic pump screaming while working. I doubt a sound module on full volume would drown it out. Besides that Bob, love your channel and love your work.
It sounds loud on the video but outside it does not sound that loud. Sound in the next video!
I just got this dozer and was following the setup controls to set the radio in the same manner as in the video. I was able to get the blade and ripper to operate as in the video however the forward/reverse and turning controls are on the wrong axis (turning on the y axis and forward reverse on x), checked my programming multiple times and it appears to be the same as in the video. Any help would be appreciated.
You could reverse the 2 plugs into the receiver. Double check the left track. Unplug the right track and make sure the left track goes fed/rev correctly.