Armydawg,i took them down cause i changed my intro,was gonna re edit it but decided to just do all new videos with my new setup,seem like alot of people liked that one..lol
***** ya man thanks,thats the best/cheapest way to go,jus buy one that snapped timing chain cause u gonna have to pull the head anyway,replace the bent valves,new chain and install u headspacer and ur good to go again
+fastest eaton lightning in socal Not sure how far a flash/tune would take you but i'd start there,along with intake and exhaust if you dont already have those...
Hey question is that turbo you have on here part number 177275? I honestly feel as this thing is like a tractor turbo but was used by a friend on another VR and ran 10s with it🤣 just super suspect about it. Was thinking of running my T3 6262 Comp since I’m running Kenitic Header and it isn’t a T4 either just the gasket I have divides it. So looks like it’s designed for a t3/t4 Let me know your opinion. Thanks homie🤟🏼
Lol..Correct aka s366,However its would be small to be a tractor turbo as I have 171702 on my rig which is also a t6 aka s475 😁..that 6262 mentioned probably would be more suitable for your build as it also would be more responsive over the s366 which comes on later as far as spool time goes
I just bought a 2003 mk4 Jetta GLI and my vr6 doesn’t look like that, and I’m New to the VW world so my bad for knowing enough haha. But is what’s the difference in that engine and mine? Can someone help me out?
Still a VR6 but you have a little more power in yours, parts for the 24v are more pricey than a 12v. Seems like it's easier to source Turbo parts for the 12v than a 24v.
Hey, my friend.... I wanna know,...would you be able to build my "2003 jetta gli vr6 24 valve" like your black one, bro? If So....how much?(if you can,🤔let me know when you could do it)
Hey man, how did you change the shift knob? Is there a process or what? I'm looking at taking the regular shift knob out and putting in a different knob.
@whatdatproductions what turbo manifold are you running? I have the same turbo but don’t know if it will fit against the firewall. Did you have to hammer it out?
WhaDatProduction ok I’ve been calling around and I even got a hold of wolf and might get there newest computer but what all did you have to do to convert your electronic throttle body to a cable? I got the trottle body just not sure with the peddles
Joe Mama363636 Throttle body and pedals were converted to drive by cable ,also my oem tach wouldn’t read the signal from the wolf so i ended up modifying the that guage in my cluster as well,the pedals i had I believe were from 034 motorsports,not sure they still make that kit though
WhaDatProduction yeah I looked and they don’t make it but is it just a pedal, cable and throttle body or did it have some wiring as well?because if it’s just the hardware I’ll weld something up but how did you plug in the cable throttle body?
+WhaDatProduction ok cool, I'm building an e30 with an M50b25 swap, I'm also gonna be running a Borg Warner that's how I found the vid, but yo yuh ting sell offf!!
Couple Questions- What shift knob and steering wheel do you have? also, whats the black piece covering your rear seats called? is it custom? thank you!
Thanks...in this clip the car wasnt fully tuned but now it runs 25psi,starts making boost about 4k rpms..not quite sure where i see full boost,now that you ask I'm gonna have to look at it..most times I'm too busy or annoyed paying attention to torque steer and wheel spinning issues...lol
My car had a standalone and was tuned by Waynespeed out in queens NY, however I never did a high boost build on a 24v so i really couldnt give you much pointers,as far as personal experience i've mostly dealt with the 12v which can take pretty much anything thrown at it
@@WhaDatProduction yeah I got this turbo in a trade from a friend wasn’t sure about it since it looked massive but fuck it figure I’d try it. It’s going in my mk1 rabbit drag truck. And it’s got massive ported head with springs & retainers DRC 268cams custom Short runner intake by don Octane, bottom end has JE Pistons 3.0 bottom end with IE Rods with Air to water Intercooler, on microsquirt with E85 and 160 shot of nitrous and my truck is full drag set up with lexan windows and weighting at 1520lbs on Bogart slicks and skinnies. I’m about a week from going to tune. So just wanted an opinion from someone that ran this before I try it😁
I have a 12v obd2 b4 Passat that’s turbo running c2 software. I just picked up a mk4 12v. Are the mk4 ecu similar to the mk3 and b4 ecu? Just replace the chip or do I have to send the mk4 ecu to the turning place like UM or unitronic?
WhaDatProduction Ok thanks. Did you change out the cams in the mk4 12V when running a short runner intake manifold? Did you run the lower plastic mani or use a AAA lower aluminum manifold? Thank you so much for the help !
+WhaDatProduction love the car man. I am running a mkv jetta fahrenheit edition on a stage 2 tune and am interested in the Borg Warner VGT/ VNT that they have in the porche 997. Have you had any experience with these turbos.
+hellaflushhonda ok,well start by reading or browsing through build threads to see if u find something that fits ur desire and go from there,its really hard to define a basic setup as different individuals applications might differ...but you can probably start with like a stage1 kit
DARK PHOENIX HD Pon dis particular setup it wasnt much as it was still stock internals with just basic bolt ons but hard fi put a dollar figure as i kept changing around shit
17 people are juelous they can't build a beast like this lol
Tony Mullins now 52!!!!
54 Prius Owners
Facts bro
70*
Exactly!!
open gate just sounds so angry!!! love the build mate, defs one of the coolest vr's on y/t
Emp210488 Thanks,appreciate it
Amazing build I watched this video almost every day to not give up. Im bilding a vr6 mk4 jetta too.
Thanks,I watch them too to motivate myself to build another one 😂🤣😂
that sound !! like boost is boiling
I literally watch this video everyday just bought a turbo kit for my 12v VR6 Jetta
Morgan Binch lol..congrats man,you’re gonna love it after your turbo install,so much fun
WhaDatProduction thank you. What do you recommend me to get for a little more then 8psi. ?
Bloodcleeet! Wicked machine. Gotta love a boosted vr6!
Nice build dude hats off to ya. Lovely motor
Anthony Beenham Thanks
Hoooolyyyy hell that’s wild and I can’t wait to get my Jetta it’s a 1.8t and I’m loving what I seeing from it
still one of my favorite videos on RUclips 👌
Lumumba Kapanga Thanks
Bout the most wicked sound i ever heard. Need to find another mk3
This is a mk4...
@@cvbgbnj6871 clearly. Want to do the same thing with a mark3
Where can i buy these type of Jetta's or what is the model, the car sounds amazing the Whistle is great
Sounds so good 2jz vibes
Armydawg,i took them down cause i changed my intro,was gonna re edit it but decided to just do all new videos with my new setup,seem like alot of people liked that one..lol
***** ya man thanks,thats the best/cheapest way to go,jus buy one that snapped timing chain cause u gonna have to pull the head anyway,replace the bent valves,new chain and install u headspacer and ur good to go again
***** lol..ok boss
+armydawg1292 yes,looks and fits decent too
hey there i just bought a b6 a4. ultrs sport quattro 6spd..hp sucks...cheap route to get to 250-275 flywheel hp
+fastest eaton lightning in socal Not sure how far a flash/tune would take you but i'd start there,along with intake and exhaust if you dont already have those...
sick ass car. hope to see it in person one day
In love wit ur Jetta bro makes me wanna finish mines already
ya man,its a very nice platform
+WhaDatProduction you have a Instagram bro
+Eddie Morales No I dont
Machine a machine 💪
🦾
Lmfaoooo that intro 😭😭. I love it 😅
😁😁
Omg this sounds fucking mean!!! I bet it’s hella fun to drive. Dream build for my jetta!
SeeTheKarma Thanks,yes alot of fun driving it
Hey question is that turbo you have on here part number 177275? I honestly feel as this thing is like a tractor turbo but was used by a friend on another VR and ran 10s with it🤣 just super suspect about it. Was thinking of running my T3 6262 Comp since I’m running Kenitic Header and it isn’t a T4 either just the gasket I have divides it. So looks like it’s designed for a t3/t4
Let me know your opinion. Thanks homie🤟🏼
Lol..Correct aka s366,However its would be small to be a tractor turbo as I have 171702 on my rig which is also a t6 aka s475 😁..that 6262 mentioned probably would be more suitable for your build as it also would be more responsive over the s366 which comes on later as far as spool time goes
That thing is a monster.
Ya man,not too bad..lol
I just bought a 2003 mk4 Jetta GLI and my vr6 doesn’t look like that, and I’m New to the VW world so my bad for knowing enough haha. But is what’s the difference in that engine and mine? Can someone help me out?
Still a VR6 but you have a little more power in yours, parts for the 24v are more pricey than a 12v. Seems like it's easier to source Turbo parts for the 12v than a 24v.
Still the sickest Jetta on youtube!
JustinoR32 Thanks man..lol
Hey, my friend....
I wanna know,...would you be able to build my "2003 jetta gli vr6 24 valve" like your black one, bro?
If So....how much?(if you can,🤔let me know when you could do it)
Blade Trinity I’m not a mechanic,I just do it as an enthusiast so I wouldn’t want to take the responsibility of building someone elses 😁
@@WhaDatProduction what do I need to get, my brother?
I am gonna do the build.(or atleast fuck up my car trying to☝️😂)
@@vr6forlife25 😂😂you’ll figure it out just like i did
Damn bro that's a monster
5 star post back the vid with the rebuild that one is a must
tru tru
Still doing builds brother ! Been a while !! ??
Can't wait till my jetta like this right now only.thing I got is ko4 turbo in it
machine shot bredda !!!!!!
Fi real mon,respect sah
Bruhhhh this is insane 2020 here
Holy hell!!!! What a beast!!!
Super dope build
best of nick Thanks
My dream car, sounds soooo good
Machine a run and sound well maddd
Fi real mon,it getting there inuh
what da fuc did i just watch i gotta engine swap and do this asap 🤩
Number plate is a beast
What a freaking beast!
SeeTheKarma Thanks
Bro I wish mine was like this I’m a build a hole engine this year
What a fun car I wish my 03 bdf ran normal in its stock form but it feels as if it runs of vacuum and no efficiency very sluggish.
wow, awesome car and sound
Thanks
Good shit bro!!! Way to rep bk
Thanks
I just wanted to know.. where did you buy the nrg seats and how are they installed.
cant wait to build my vr6.....
Pog Crohnie i want put turbo on my vr6 too😍
@@cabra_team9378 Its on first start in a week!
there was a video of this monster called "walk around"..where"s it.please upload that sound video again..
Erdinç ETLİ I edited peices into my latest upload instead of having so many clips
can you send that "walk around" video to me..
Stock ECU ?, Reflash ?, which one (brand)? . Great Proyect, keep it up !!!!
Ty...its running on a "wolf v500" standalone
Dat ting madddd bumba
Subscribed cuz of the sweet fucking vr6 sound 🏎🏎💪🏻💪🏻
lol..thanks
Hey man, how did you change the shift knob? Is there a process or what? I'm looking at taking the regular shift knob out and putting in a different knob.
yes I did,its straight forward though,once you attempt to do it you'll figure it out
@whatdatproductions what turbo manifold are you running? I have the same turbo but don’t know if it will fit against the firewall. Did you have to hammer it out?
Juan Perez Its the regular ebay cast,watch my build vids,had to do a bit more than hammering to make that turbo fit..lol
Love the intro lol. What coil pack is that on there? (probably not a question you get a lot, but I know they have a tendency to crack)
TheMainMan318 Thanks,those are regular msd gm style msd coils retro fitted to my application,they create 4x more volts and are less prone to failure
WhaDatProduction I know a common swap for the coils is using the ford coils, are these as straight up as a set up as the ford?
TheMainMan318 Not familiar with the ford coils but i would assume so as these are easy/straight forward as well
I'm in love.
Left this comment here 3 years ago. I now have an s366 on my 335i lmao
Hey are you ever gonna reupload the old videos. Especially the one where you freshen up the motor?
I wanted to,as i took em down to ad my new intro..seem like i didnt save it on my drive..smh
+WhaDatProduction What wheels are you running?
+SovietsRule 18x9.5 squared varrstoen es2
Hey dope vids, one quick question what the spec on ur BW turbo?
Is it a journal bearing or ball bearing?
bigzgs Journal
Great set up, euro community love:)
Thanks
+WhaDatProduction yo were r u located I am in CT we need to link up I am trying to build my jetta
+Damien Travis NY,relatively near to the Ct border
+WhaDatProduction OK close to me I am in new Haven CT
+WhaDatProduction hit me up on my email damien161984@gmail.com n go from there n c if u can help me finish building mine also
hi there i wondering if you can help me out am trying to delete my factory oil cooler and am trying to find the adapter you got thank you.
Hey I talked to you a few times about the stand alone from wolf EMS and I was just wondering was it a plug in play or did it have to be wired in ?
Joe Mama363636 Had to wire it in,not sure if a plug n play harness is available
WhaDatProduction ok I’ve been calling around and I even got a hold of wolf and might get there newest computer but what all did you have to do to convert your electronic throttle body to a cable? I got the trottle body just not sure with the peddles
Joe Mama363636 Throttle body and pedals were converted to drive by cable ,also my oem tach wouldn’t read the signal from the wolf so i ended up modifying the that guage in my cluster as well,the pedals i had I believe were from 034 motorsports,not sure they still make that kit though
WhaDatProduction yeah I looked and they don’t make it but is it just a pedal, cable and throttle body or did it have some wiring as well?because if it’s just the hardware I’ll weld something up but how did you plug in the cable throttle body?
Yow boss yuh machine ah run!! I have some questions, r u running boost by gear? how many cc's injector? what ecu u used to tune?
wolf v500 standalone....no boost by gear and 870cc injectors
Yow ting sound good, any internals?
+Chad Allen ya mon ty,stock pistons with pauter rods,cat cams and arp bolts...other dan those everything else internally stock
+WhaDatProduction btw..in this clip car was on a base file and pulled 460....now mi get it tuned it pulled 575whp so far
+WhaDatProduction ok cool, I'm building an e30 with an M50b25 swap, I'm also gonna be running a Borg Warner that's how I found the vid, but yo yuh ting sell offf!!
Yes dredd what exhaust are you running have you got a full spec?
Yunus Rai Custom 3” into a magnaflow muffler
Where did you get your spoiler/ducktail?
is that your grandma filming in the back?
Couple Questions- What shift knob and steering wheel do you have? also, whats the black piece covering your rear seats called? is it custom? thank you!
Steering is a momo jet,standard short shifter with an additional 2" taken off and the rear seat delete was custom made by me using aluminum
Awesome car! Thanks for the Info!
+Slammed Whips Ty,np
such a sick car! What are the name of those rims!?
varrstoen es2
Damn is this the 12valve vr6 ?
pepijnowns Yes
WhaDatProduction u believe same set up would work on 24 valve vr6
@@cocotine1000 you ever do anything with that 24v? It can be done but theres just less out there for the 24v
holy shit
Did you build your own turbo kit or did you buy one premade and upgraded from their?
Pyrax Its prettymuch a pieced together kit with some parts being custom made
Huge fan of the s366 and a former mk4 vr6 owner.
when do you see full boost, and how much psi?
Thanks...in this clip the car wasnt fully tuned but now it runs 25psi,starts making boost about 4k rpms..not quite sure where i see full boost,now that you ask I'm gonna have to look at it..most times I'm too busy or annoyed paying attention to torque steer and wheel spinning issues...lol
What kinda blow off valve did you have on this or what kind of diverter valve? Trying to run the same setup.
Ronald Munn Its a tial 50mm bov
What are all the things you did to the car? Is a a 1.8T or the VR6??
Its a vr6
The MSD coils 😍
💪💪
+WhaDatProduction how much were they? I wanna do the conversion
+Mothruh the actual coils were approximately $50each and you need three,can be picked up at any local auto store,autozone etc.
+WhaDatProduction I wanna get these instead of stock, what else would I need? Three of the coils, bracket etc.
+Mothruh Depents on how handy you are but i made my own bracket
Wow that sound Fck amazing
John Calderon Thanks
This is amazing
Nelson Reyes Thanks
@@WhaDatProduction i wana do turbo my v5 golf what the best way bro
nice work man
Thanks
I got a vrt cabby its bad ass to
+nigel alexander Nice,gonna check it out if you got it posted
What part of ny are you in because I'm in jersey
+nigel alexander Westchester
a so mi want fi mi mk4 wolf fi run deh one yah sell off
What exhaust manifold you running?
MI BOMBOCLAT🗣️🗣️🗣️
Hey my buddy is turboing his 24v any tips and who tuned your car?
My car had a standalone and was tuned by Waynespeed out in queens NY, however I never did a high boost build on a 24v so i really couldnt give you much pointers,as far as personal experience i've mostly dealt with the 12v which can take pretty much anything thrown at it
The bloodclatt this bad u fuck.. intro sick
fi real man,respeck
WhaDatProduction where are you located? I'm in PA.. link me with your contact.
WhaDatProduction yow did you build the to motor like rods and piston?
Chovoy Warren Stock internals on this setup,just a headspacer and arp bolts
WhaDatProduction really wow it sounds like a savage, how much boost and what power you think you made there?
Yo fam where in queens did you get the ecu tuned ?
U post again........Dat means u building again?😏
Yo did you feel this turbo being lazy by chance till in the high RPM?
Ya definitely laggy,but when it hits its like a on or off switch 😁
@@WhaDatProduction yeah I got this turbo in a trade from a friend wasn’t sure about it since it looked massive but fuck it figure I’d try it. It’s going in my mk1 rabbit drag truck. And it’s got massive ported head with springs & retainers DRC 268cams custom Short runner intake by don Octane, bottom end has JE Pistons 3.0 bottom end with IE Rods with Air to water Intercooler, on microsquirt with E85 and 160 shot of nitrous and my truck is full drag set up with lexan windows and weighting at 1520lbs on Bogart slicks and skinnies. I’m about a week from going to tune. So just wanted an opinion from someone that ran this before I try it😁
@@jdportwerks6795 wow..it sounds wild already 😁😁👿👿
how much hp was it making
sick car btw
Dinci90 In this clip it was making 470whp however it went on to make 575whp on stock engine before I decided to go forged
@@WhaDatProduction Car is so sick man ty for replaying :D
@@aldinbratic3162 Np
I have a 12v obd2 b4 Passat that’s turbo running c2 software. I just picked up a mk4 12v. Are the mk4 ecu similar to the mk3 and b4 ecu? Just replace the chip or do I have to send the mk4 ecu to the turning place like UM or unitronic?
thestig572420 Never had a mk3 but with the mk4 Its a file uploaded to the ecm as opposed to burning a chip in
WhaDatProduction
Ok thanks. Did you change out the cams in the mk4 12V when running a short runner intake manifold?
Did you run the lower plastic mani or use a AAA lower aluminum manifold? Thank you so much for the help !
thestig572420 Yes I had cams with the short runner on boost,never had cams NA though
U should come to h20 this year
Yes,I'll try to make it,never actually been to any major vw/audi shows with it yet
How are you liking the msd coil set up ?
Been running it for a while now with no problems,had low spark issues with my oem unit and this solved that issue. 4x more voltage
+WhaDatProduction same here and they look good lol. Great vids btw
+thestig572420 thanks
Mad and mean yow come link wid the machine one a dem day yah
ya mon,simple ting
+WhaDatProduction cool no mi go fi a ride inna the bad machine
+rash eed ya mon,no problem mi boss,simple ting dat to,dunn know
Do u tune your own car?! If u do is it plug n play?
Ricardo Rodriguez No I dont tune it myself and the standalone had to be wired in,wasnt plug n play
Are you going to waterfest?
I want to get my tune complete first so maybe on sunday
How muxh did your build cost?
+WhaDatProduction love the car man. I am running a mkv jetta fahrenheit edition on a stage 2 tune and am interested in the Borg Warner VGT/ VNT that they have in the porche 997. Have you had any experience with these turbos.
Thanks,only borg warner I have experience with are the s366 and my present s369
Awesome shit
Fi real war head
That VR6 its still have stock Pistons and Rods?
Luis Carlos Lozada yes
how did you turbo the vr6 I have, the 2001 glx vr6 and want to turbo it but have no idea where to get the parts or where to even start
+hellaflushhonda well it depends on ur goals and budget,I personally get a lot of parts used from the local forums etc.
just like a basic setup nothing to special
+hellaflushhonda ok,well start by reading or browsing through build threads to see if u find something that fits ur desire and go from there,its really hard to define a basic setup as different individuals applications might differ...but you can probably start with like a stage1 kit
and one more question how did you do the aftermarket shift knob cuz,i know the mk4 jettas is threadless
It sounds like 2jz
Yep
Yep
powerrrrrrrrr
Wish that my golf 4 vr6 would go as urs😭
Left di evo game fi german machine
Ya mon,ya suh it deh fi right now..lol
what size is the exhaust flange for the turbo ? and what's the wastegate size or you using old school or vband ones ?
Aman Brar Flange size is 4.1" and a 39mm precision 2 bolt wastegate
WhaDatProduction is it t3 or t4 flange ?
Aman Brar t4
WhaDatProduction did u modify the flange for the turbo ? and what kind of exhaust manifold
WhaDatProduction did u modify the flange for the turbo ? and what kind of exhaust manifold
Sick!!!!!!
ina all how much did all of the upgrades cost you?
DARK PHOENIX HD Pon dis particular setup it wasnt much as it was still stock internals with just basic bolt ons but hard fi put a dollar figure as i kept changing around shit
Bad ass!!
Kat9293 Gmk Thanks
what for an Ar 0.88 0.91 or 1.00?when startet the turbo?sorry my english is bad
LehDavid Its a .91a/r twin scroll that i knife edged to work with my open scroll manifold
WhaDatProduction what Engineering speed have you full boost?100kmh-200kmh how many seconds?