Oh! I searched the whole world to find you. Thank you for sharing so many great techniques, the video tutorial - Resizing a clay ring - sand casting tutorial has been great for me and the whole community. Thank you so much, love you so much. Wishing you good health and continued work growth.
Whaaa, you’re amazing at this!! So quick and confident and awesome outcome. Have had such a knowledgeable session watching this. Thanks. my kit just arrived today and I’ve been keen on trying for so long. I’m stubborn with my creativity so I was trying to do it alone working out what sands and moulds and melting points of metals. Just bought the kit that you are working with. (With delft clay) So so keen to try. Thanks for your tutorial, helping a lot!
Hi There. Very interested in the sand casting. I bought a heap of Lost wax casting equipment from a lady on Hindmarsh Island. Just need the vacuum pump. have all the other necessary gear but no Idea. Maybe the sand casting is a good place to start. Were would be the best place to get the flask and clay. AJS? Twin Plasa? I have quite a few small sapphires not suitable to cut but may be good for this style of casting. I will have a look see if I can make on of you courses at the jam factory.
Awesome result and well explained! I am just getting into making my first ever jewellery, after two years of regular metal casting; so this is very helpful :)
Thank you so much for making this! I have the cast kit from Craig but have failed multiple times trying to make this exact ring. Your video was super helpful now I’m going to try again today!
Fabulous Kirra-lea. Thanks for this. I love your calm, clear demos. I’ll get some of those sizer rings. Don’t tell a soul that this beginner used cardboard and sellotape to cast a bigger ring. No one must know!
THANKS, FOR THIS DEMO! HOWEVER: IMHO: YOUR FEEDER SPRUES OUGHT TO BE DIRECTLY INTO THE LARGEST MASS SECTION OF THE PATTERN,... VET SPRUES COME OUT OF THE SMALLER SECTIONS...
Hi Doing it this way doesn’t this just make the ring thicker tho I’m guessing if you are trying to stick to a certain weight light a wedding band This way is no good But just thought on Couldn’t you use the ring sizes for making wedding bands
Hi Kirra-lea, I'm just learning how to do this process at my work! Is it possible to use old scrap gold jewellery? I heard combining old jewellery might make the metal weaker? It's all 9carat but most likely mixed with different alloys.
Nicely done. Silver is probably the best metal to plate. Any diamond setter with a plating tank will take silver; it's a typical valuable metal and it doesn't cause any disturbance to the plating cycle.
Hi! Im starting to get really into jewlry now, and im trying to buy the sand and also the conainer, do you know any online shop that is not expensive P.S loving all your videos, really getting me more into casting my on jewlry
Hey Kirra! First off I think your videos are AWESOME! Secondly I'm just starting out and attempted my first cast yesterday (I knew it was going to be a fail half way into making the mold as there's a hole in the middle of the signet I was trying to cast but I'm a tryer 😂) when my mold was complete I realised the centre circle of the ring wasn't staying in place so I tried again with another ring (no hole) and the same thing happened? I'm not sure why as I'm chopping the clay up fine, packing it hard with a hammer and using talc 🤷♀️. Can you advise on what I'm doing wrong? ALSO is it possible to sand cast carvings with holes or do I have to drill in after? I feel like if anyone would have an optimistic answer it would be you! Thanks in advance! Nads x
I just came across your channel and very much appreciate the information. Thank you! Would it be possible to share where or brand of the loose ring sizers, I’m seem to only find the ones that come with the ring attached. Thanks for your work!
Thx for a helpful video! i'd like to ask some questions if you don't mind/ Yesterday i tried to melt 915 silver (it was an old spoon i don't need) in my crucible, and when silver starting to melt, the borax starting to melt too. and they kind of mixed with each other. do you know why that could happened? thx in advance.
What you have described sounds odd. But borax is meant to melt when it gets hot, it turns into a liquid. When it cools it turns into a solid like glass.
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Oh! I searched the whole world to find you. Thank you for sharing so many great techniques, the video tutorial - Resizing a clay ring - sand casting tutorial has been great for me and the whole community. Thank you so much, love you so much. Wishing you good health and continued work growth.
Nice!
What a great job.
Whaaa, you’re amazing at this!! So quick and confident and awesome outcome. Have had such a knowledgeable session watching this.
Thanks.
my kit just arrived today and I’ve been keen on trying for so long.
I’m stubborn with my creativity so I was trying to do it alone working out what sands and moulds and melting points of metals.
Just bought the kit that you are working with. (With delft clay)
So so keen to try. Thanks for your tutorial, helping a lot!
Fantastic!!!
What a masterpiece stuff I see wow great work
No wasted motion. You are incredibly proficient in pouring and teaching. To end up with such a fine ring, is amazing!
What’s the name of the song ?
❤ very very good 👍 ji
Hi There. Very interested in the sand casting. I bought a heap of Lost wax casting equipment from a lady on Hindmarsh Island. Just need the vacuum pump. have all the other necessary gear but no Idea. Maybe the sand casting is a good place to start. Were would be the best place to get the flask and clay. AJS? Twin Plasa? I have quite a few small sapphires not suitable to cut but may be good for this style of casting.
I will have a look see if I can make on of you courses at the jam factory.
Both Combined Jewellery Services and Australian Jewellery Suppliers are great places to buy clay and flasks from in Australia :)
Kira, great work, need to try to make one from silver or gold, just need to learn how to set a diamond.
What gas do you melt using? LPG only or LPG mixed with O2 ? thank you
Fantastic work, also great song 👍👍
imho: i don't like "jewelry" that looks like "precision machined parts"!... IMHO: "HAND-FORGED", ENGRAVED JEWELRY LOOKS A LOT BETTER!!
Is it possible to make a pronged ring (engagement ring) with sand casting?
Awesome result and well explained! I am just getting into making my first ever jewellery, after two years of regular metal casting; so this is very helpful :)
Happy to hear I have been helpful :)
Thank you so much for making this! I have the cast kit from Craig but have failed multiple times trying to make this exact ring. Your video was super helpful now I’m going to try again today!
Fabulous Kirra-lea. Thanks for this. I love your calm, clear demos. I’ll get some of those sizer rings. Don’t tell a soul that this beginner used cardboard and sellotape to cast a bigger ring. No one must know!
"If it works, do it"... my mantra for the 2022.
Hahaha whatever gets the job done! :)
THANKS, FOR THIS DEMO! HOWEVER: IMHO: YOUR FEEDER SPRUES OUGHT TO BE DIRECTLY INTO THE LARGEST MASS SECTION OF THE PATTERN,... VET SPRUES COME OUT OF THE SMALLER SECTIONS...
What torch are you using?
Hi
Doing it this way doesn’t this just make the ring thicker tho
I’m guessing if you are trying to stick to a certain weight light a wedding band
This way is no good
But just thought on
Couldn’t you use the ring sizes for making wedding bands
Where did buy your casting aluminum from? Also where do u buy the torch thank u!
Beautiful job, really enjoyed your explanations.
What are your regulators set at to get your flame so powerful?
When making custom gold rings what stamp do you put in it
Can buy red clay sand casting with that round sandbox?
Nice. Where can I get a torch system like yours?
Vey nice and elegant, I need to try and make one out of silver or gold, just need to learn how to set a diamond
What material is this silver or something else ?
Hi
Can you do a curb ring In sand cast
What was the website you mentioned?
Gah - i want this ring. And now I wanna make it. Dang, I really don’t need another hobby but that looked very cool.
I’m in the same boat
Muy bonita.
Hi Kirra-lea, I'm just learning how to do this process at my work! Is it possible to use old scrap gold jewellery? I heard combining old jewellery might make the metal weaker? It's all 9carat but most likely mixed with different alloys.
Thank you for this awesome tutorial! It was very helpful.
Would you mind sharing the tool you used for poking the air vents? Thanks in advance ;)
Nicely done. Silver is probably the best metal to plate. Any diamond setter with a plating tank will take silver; it's a typical valuable metal and it doesn't cause any disturbance to the plating cycle.
Hi! Im starting to get really into jewlry now, and im trying to buy the sand and also the conainer, do you know any online shop that is not expensive P.S loving all your videos, really getting me more into casting my on jewlry
Try DIY Casting :) They sell a whole heap of sand casting products
muy buen trabajo,gracias por compartir
Hey! Nice job, may I ask you what's the tool you us to set the stone?
Thx in advance
I use a little needle burnisher :)
Can you please share link where can i buy the exact mould??
Great detailed explanation of your process. I’ll have to try this. ✊🏻🖤
Hey Kirra! First off I think your videos are AWESOME! Secondly I'm just starting out and attempted my first cast yesterday (I knew it was going to be a fail half way into making the mold as there's a hole in the middle of the signet I was trying to cast but I'm a tryer 😂) when my mold was complete I realised the centre circle of the ring wasn't staying in place so I tried again with another ring (no hole) and the same thing happened? I'm not sure why as I'm chopping the clay up fine, packing it hard with a hammer and using talc 🤷♀️. Can you advise on what I'm doing wrong? ALSO is it possible to sand cast carvings with holes or do I have to drill in after? I feel like if anyone would have an optimistic answer it would be you! Thanks in advance! Nads x
Hello. Did you manage to solve this problem?
I just got mine . How did you cut the pour hole please !
Jewellers saw frame :)
Awesome 👏
I so appreciate your Viddys ,, such a good follow up from your workshops 🔨 🔥
Great video thank you
What kind of heat system you’re using, thank you
How can I caste a hollow ring please?
I just came across your channel and very much appreciate the information. Thank you! Would it be possible to share where or brand of the loose ring sizers, I’m seem to only find the ones that come with the ring attached. Thanks for your work!
I bought my set from Australian Jewellery Suppliers :) But you can use the ones on the rings, just take them off the big ring :)
Hands down the best sand caster! 🙌
Thx for a helpful video! i'd like to ask some questions if you don't mind/ Yesterday i tried to melt 915 silver (it was an old spoon i don't need) in my crucible, and when silver starting to melt, the borax starting to melt too. and they kind of mixed with each other. do you know why that could happened? thx in advance.
What you have described sounds odd. But borax is meant to melt when it gets hot, it turns into a liquid. When it cools it turns into a solid like glass.
@@sandcasting_with_kirralea yes that was strange for me.i didn't expect that. May be too much borax was in this crucible...
@@sandcasting_with_kirralea some silver particles stuck in the solidified borax/ yes borax looks now like dark grey glass cover/
@@sandcasting_with_kirralea Yes it was too much of borax in crucible, i had to remove most of it. Now everything is fine!
ಲವ್ಲಿ ಕ್ವೀನ್
Lindo señora,, 👌👍🌻
☺️👏👏👏👏👏
Excelente!
Your work is beautiful! I love the mixed metal winding river piece on your website!
прикольно