@@EODFish Outstanding. Been researching heavily as more and more guys in my unit are using battle belts (light infantry company in the natty gerd) and this would be my first. Between this and the Volund Gear Works belt but this is quite cheaper and stupid lighter. I’ll have to rattle can the tegris but my only other concern was that smaller portion of Velcro holding in place and standing the rest of time. Thanks for the info and fast response!
This vs salt belt? have a Ronin Senshi but for my uses the molle is ass. Want to run a nut ruck that I can buckle to the belt and the Ronin molle is too far apart to attach a qasm or snap on buckle to it.. Was about to pull the trigger on the salt but then saw this. I swear you, Garand Thumb, and a few others are going to be the reason I don't start a 401k till I'm 45.
Tegris says it's a 100% polypropylene weave, but I agree with Mr Fish in that it's probably Magic, Strenf, and Anti-Gravity Matter. Pretty much a Wonder Material as far as the tactical textiles industry goes--stupidly light, insane abrasion resistance, laser-cuttable via CNC, waterproof, extremely temperature resistant both ways...and to top it all off, you can sew through it without compromising its integrity.
Quick question: if I move my hand fast enough along the edge of the Tigris material, am I gonna get broken fibers stuck in my fingers, similar to fiberglass
I got one of these and I see a bunch of ppl bitching online did I make a mistake lol? Also what’s the best holster set up with one of these? Safariland with the banger hanger ?
@@EODFish I love them aswell and have 4 pistol and a rifle carrier, but before I spent some dough on all the mounts I wanted to see which would work. So far I have not found any images online combining the two. I imagine if they were to work I’d probably have to use the molle clips, but I have been conserved about the amount of play and the fitment.
I think that exposed material is gonna suffer greatly with serious UV exposure over time compared to it being atleast given a thin sleeve (NV/AZ heat and exposure is my example)
Looking at the actual use, most of the belt will never see the light of day and the rest will have so little cumulative exposure I doubt it will be an issue.
Does the sizing have some play? I'm right on cusp being pants size 31/32 and their sizing says small is 28-32 but medium is 32-35 which seems big. I'm wondering if there is play because I'd rather get the small size.
The bison belt stocking issue was Cobra buckles from AustriAlpin. Ferro appears to have resolved that though as they and their dealers restock about every other week now. This however, doesn’t have that. So as long as they have Tegris (and AXL always has Tegris) they should be good. The add on buckles may be perpetually OOS but G hooks are pretty easy to come by.
@@slick4415 these “favorite” questions are always hard because I have so much on hand due to the channel. Assuming I don’t have some unique requirement for a belt, I’d say yes.
@@EODFish thanks man, I should have waited to comment till I watched some more videos. Now I’m looking at the axl or the new bfg belt they are gonna have coming out. The none helicopter chlk belt
Развлечения
Ok that load-bearing closure is genius tho, that's outta control
This video is gold. My belt was too big when I first got it and it was driving me nuts. The sizing adjustment was crucial.
Whats your sizing and what did you get? if you don't mind me asking.
Damn that is Supa hot fire. Also, as far as gear videos go, yours are always informative and enjoyable to watch.
Thanks man, I really appreciate that and am always glad that people don’t mind a lack of flair.
@@EODFish I think a lack of flair is especially refreshing in gear videos considering all of the hypebeasts doing gear videos.
This is super informative, I learned a lot about the product. Thanks
Lots of great information on this video. Good job!
Another outstanding review 👏
"Dailon, Dailon, Dailon. Hot fiyah!"
Great video wish you could link to other additional gear on this belt. ie, holster assembly, pouches, etc. Thanks
Good job
Nice
Was there a reason you didn't skip a column with the 9022 molle straps? The strap binding is triggering my ocd. Good review.
I didn’t end up with an odd number of columns and wanted it centered. I agree it looks ass but it works well.
How do you like he belt when used in conjunction with an AWS/Ronin inner belt? (Currently about to switch over from AWS)
No complaints on any inner belt that I have tried.
Do you find that the 1in Velcro on the outer belt is any less effective of securing to the velcro on your inner belt?
Not at all.
@@EODFish Outstanding. Been researching heavily as more and more guys in my unit are using battle belts (light infantry company in the natty gerd) and this would be my first. Between this and the Volund Gear Works belt but this is quite cheaper and stupid lighter. I’ll have to rattle can the tegris but my only other concern was that smaller portion of Velcro holding in place and standing the rest of time. Thanks for the info and fast response!
Do you think tek loks will fit secure due to how thin the belt is, also that it is different width on top and bottom?
I have a teklok but use them so rarely I didn’t think to try it. I’ll check.
@@EODFish Thanks!
When does this come out and how much is this going to cost me I just tryed to look on there web sight and couldent find it
$100 bucks and I can easly change to q cobra buckle well poop now im going to have an all axl style prodects lol
This vs salt belt? have a Ronin Senshi but for my uses the molle is ass. Want to run a nut ruck that I can buckle to the belt and the Ronin molle is too far apart to attach a qasm or snap on buckle to it.. Was about to pull the trigger on the salt but then saw this. I swear you, Garand Thumb, and a few others are going to be the reason I don't start a 401k till I'm 45.
Both are exceptional belts. The SALT is more user friendly for holsters.
how do you prevent wiggle room with the malice clip on the eclipse belt??
I heard you mention the name Tigris as the material, what is it composed of?
Magic, strenf, and anti-gravity matter.
Tegris says it's a 100% polypropylene weave, but I agree with Mr Fish in that it's probably Magic, Strenf, and Anti-Gravity Matter. Pretty much a Wonder Material as far as the tactical textiles industry goes--stupidly light, insane abrasion resistance, laser-cuttable via CNC, waterproof, extremely temperature resistant both ways...and to top it all off, you can sew through it without compromising its integrity.
Quick question: if I move my hand fast enough along the edge of the Tigris material, am I gonna get broken fibers stuck in my fingers, similar to fiberglass
You are probably more likely to get a paper cut type sensation.
Do you know if it would be weight rated provided I get the cobra or raptor buckle option?
I don’t but I do know that was never the intention.
Cobra buckles are banned by socom actually for load bearing because they’re a failure point, so no.
@@legbiter1462 interesting, thanks
Can you swap the G hook buckle for a cobra later?
Yes, I show you how in the video.
With a pant size of 31/32, should I go small or medium?
Follow whatever directions they have on the site. You literally can’t get too big of one though as I show towards the end of the video.
I got one of these and I see a bunch of ppl bitching online did I make a mistake lol?
Also what’s the best holster set up with one of these? Safariland with the banger hanger ?
That’s a fantastic combo. Don’t sweat people, lots of dumb ones are out there.
@@EODFish I got it with the blue alpha inner!
Anyone have any insight into which gcode clips would be needed to mount gcode scorpion mag holders on this belt?
I love soft shell scorpions but the mounts are pure cancer. I’ll never buy another just because of them.
@@EODFish I love them aswell and have 4 pistol and a rifle carrier, but before I spent some dough on all the mounts I wanted to see which would work. So far I have not found any images online combining the two. I imagine if they were to work I’d probably have to use the molle clips, but I have been conserved about the amount of play and the fitment.
@@EODFish so I’m assuming there isnt a way to make it work. Lol. Bummer
@Jim D don't know if you ever figured it out, but if you're willing to get a little crafty you can modify malice clips and mount them to the scorpions
The Guardian Warrior Solutions adaptors allow the gcode pouches to go direct to molle.
I think that exposed material is gonna suffer greatly with serious UV exposure over time compared to it being atleast given a thin sleeve (NV/AZ heat and exposure is my example)
Looking at the actual use, most of the belt will never see the light of day and the rest will have so little cumulative exposure I doubt it will be an issue.
@@EODFish then i'll buy it for nightime use only aye? Noted haha. How light is this thing compared to most other belts youve used?
@@moss8702 it’s 4oz. I’m pretty sure a cobra buckle alone weights more.
what drop is that for the omnivore?
True North Concepts
Does the sizing have some play? I'm right on cusp being pants size 31/32 and their sizing says small is 28-32 but medium is 32-35 which seems big.
I'm wondering if there is play because I'd rather get the small size.
There is but they are also infinitely adjustable to go smaller. I’d probably get the medium though.
What waist size do you wear?
34”
Anyone trying to buy my bison belt?
I’ll trade other things for it so I can compare them.
If it’s a medium RG I’ll take it
Is this going to be another Bison stocking issue?
I have no idea as I’m not a part of any of the logistics chain for these companies.
@@EODFish yeah I know. Just kind of an out loud thought. Oh look a cool product that's never in stock.
The bison belt stocking issue was Cobra buckles from AustriAlpin. Ferro appears to have resolved that though as they and their dealers restock about every other week now.
This however, doesn’t have that. So as long as they have Tegris (and AXL always has Tegris) they should be good. The add on buckles may be perpetually OOS but G hooks are pretty easy to come by.
@@stoner_pinky does the Slickster have a Cobra buckle? Do their danglers? Slingster?
@@ChadCesaro I don’t know smartass? You tell me. I’m just TELLING you the bison belts restock about every two weeks.
How does it compare to the Bison belt
I haven’t tried the bison belt but I have no doubts more design and technical prowess went into this.
@@EODFish is this your go to belt?
@@slick4415 these “favorite” questions are always hard because I have so much on hand due to the channel. Assuming I don’t have some unique requirement for a belt, I’d say yes.
Do you have a clue when one will come out? Gotta get myself one
End of the month.
@@EODFish Appreciate it, keep up the contents as always
This vs ferro bison?
This all day everyday.
@@EODFish thanks man, I should have waited to comment till I watched some more videos. Now I’m looking at the axl or the new bfg belt they are gonna have coming out. The none helicopter chlk belt