@@sirlorax9744 then you know, Google SL1200s, they were the working decks for DJs for years. I've been using my original pair of SL1200M5Gs since the early 2000's. I also daily a 2009 76 Series Land Cruiser. They are the same quality and simplicity.
$15.00 pandemic era Technics SL-1500 yard sale pick up here. I had it serviced and replaced the RCA cables and ground wire with new because the originals were damaged in a fire, some caps were also replaced. It works 100% today.
Picked up a SL-1600 for $50 at an estate sale last year primarily because it had a grado f3 cart, I was going to put it on my sl-1200 but I plugged it in and hooked it up to my marantz 2275 and it’s been there ever since the automatic start and stop still works flawlessly
Bought my first Technics in 1976, a Technics SL3200. It still runs perfectly today, 48 years later (except the strobe is burned out). A couple years later I bought a Technics SL3300 and still have that 46 years later. Everything works perfectly. I spin records 12 hours a day, and longer on weekends, and these workhorses are still running at perfect speed, with not one single issue with either table. There's a reason they are so highly regarded!
I purchased a sl-1800 MK1 last week and love this thing! Solid performance, suspended platter makes it a very quiet turntable. I did preventive maintenance by de-oxit all the pots, cleaned and relubed the spindle and thrust plate, cleaned and relibed the tone arm lift piston and she runs like a top. Solid turntable and beats any modern turntable today under 1K
I have my original Technics SL-D2 with an AT155LC cartridge. My youngest musician son was able to find a nice D2 for his system and he loves it. Technics turntables indeed.
I now have three early 80s Technics tables, all linear trackers. The iconic SL7, the SL- Q15 and the SL-L1. They all needed work to get fully operational but I absolutely love them. They are just so convenient and sound great. I have a Clearaudio Performance SE and a MoFi Studio deck, but increasingly find myself going to the Technics for my vinyl fix. My son has the SL-L1 in his flat and uses it all the time.
So, I found a SL-230 at a garage sale last year for basically free, took it home and thus began my journey into vintage audio. I went ahead and disassembled the deck and got all of the automatic functions working, including the repeat function. Based on this success, I felt emboldened to start looking at vintage receivers. Since then, it has become an obsession and I've refurbished a few other turntables as well as a number of receivers. I am now in the process of building out a home hi-fi listening room for some of my favorite pieces. This journey led to me finding Skylabs Audio. Kevin, you do a great job on these videos and I really appreciate your commitment. To everyone, get out and support Skylabs Audio. I've personally purchased a number of t-shirts, not that I needed any more, but just to show my support to Kevin and the entire team! Keep up the good work!
I love their linear tracking models, I have an SL-J33 (silver) that I got used and cleaned up, lubricated and replaced a couple of the feet. Works great, just close the lid and press play.
Same here. I have 4 vintage turntables and the one I use most is my SL-1900. It was my father's table but I probably used it more than him back in the 70s and 80s. I have done normal maintenance on it and it still works perfectly.
I have an SL-1900 I took a chance on from ebay. I was lucky that it only needed some basic maintenance and adjustment. Great table and it looks sharp too.
I still have my 1974 Technics SL-1300 and 1975 SL-1350. Each has been serviced twice and and utilize my vintage high end Audio Technica cartridges with ease. Love 'em!
I have the Technics SLQ-200, I had purchased in October of 1983. I had not used it for several years from about 1990 to 2021. Pulled it out, cued up a record and it still worked perfectly! I paid $109.99 from a local retailer. I did have a dust cover get broken (cracked) when someone set something on it. Got a replacement and had the same problem a year later. Great equipment!
I bought a 1950 for $60 from a second-hand store two years ago and it still plays great! Did not come with the changers/spindles, but not sure I would use them anyway. The only problem is the dust cover won't stay up on it's own. I just take it off when I'm using it and put it back on when I'm done. Great machine!
Technics has always been a great value. I started with a SL-23 back in the 70’s and the reliability got me hooked on them. I love the linear trackers. My living room set-up includes a recapped SL-10 with the original moving coil EPS-310. The linear trackers aren’t for everyone, you should be prepared to do the tech work to make them functional. Overall, I have been lucky to own both ends of the Technics line and many in between.
Agree. I have an SL-7, an SL-QL15 and an SL-L1. All great, though the SL-7 is my favourite. Built like a tank and I found someone in the UK who 3d prints the wedge stands for it, so it looks fantastic. They all needed work, but it was all basic mechanical and cartridge stuff. Happily the electronics have behaved themselves so far.
My biggest regret was getting rid of my Linear tracker back when styluses were IMPOSSIBLE to find if i had known there we would be able to buy BRAND NEW stylus for LONG DEAD Carts from GOOD manufacturers i would have SEARIOUSLY held on to it
He is 100% correct regarding the 1980s Technics tts. They just work. They're easy to repair and parts are abundant and most importantly the sound is on point and clean
My father-in-law gave me his MCS-6800 24 track programmable 6-album turn table recently. I was AMAZED that it works just like new. Luckily the belt fell off a long time ago and was still in great condition. I just ordered new belts and stylus for it.
Ohh boy what a nostalgia rush! I remember back in the day when Technics wanted to discontinue the SL1200 series, and we DJ'S collected signatures, and got them to change their mind. The SL1210MK2 was the best turntable i've ever owned. Rugget and stable like nothing else!
I’ve had a few 1980s Technics, regretted selling them. I now own 2 Technics 1200s MK2 purchased brand new in 1999 & they are like brand new today, still have the original boxes with the manuals still in the envelopes, the rubber platter mats are still in the paper unused, complete with the extra weights for the back of the tonearm & the stylus hangover tools. Bulletproof turntables.
I LOVE the 1200 MKII It took me YEARS of hunting to find one, got it a a estate sale for $18 3 years ago it run performs great but 2 of the resistors get pretty hot and I am trying to track down the cause, they seem to be a common fail points because MOST of the 1200's I see online have a Bubble under the Platter on the plastic dust cover in THE SAME SPOT but NONE of the techs online EVER talk about what cause that failure gotta protect that revenue I guess
For those of you possibly looking at a new Technics, I bought an SL-1210 GR for about $450 off due to the GR2 coming out! If you see one in stock at a reputable online dealer, it doesn’t hurt to ask. I bought the second to last one at Sweetwater.
Got from orginal owner Technics MA1 rosewood plinth automatic just lubed & replaced cartridge & stylus. Got a SL-V5 vertical model from retired Technics dealer which looks great with picture records. Got a restored !600 mk2 , guy got from Japan & cleaned & relube , clean tone arm assembly, new tone arm gear & belt. lubed motor. A beauty with suspended platter & tone arm. Got J33 programable linear compact linear clean ,lubed & new belt for linear .
I got a Dual 621 from the 70ths and I love it. I know you dont recomment full automatics, but fo me the automatic function is a must. And when I bought it, the automatic function was also not working, but I repaired it myself.
I bought an SLD202 around 1981 for $200 Canadian. I sold it to a friend when I went to CDs in the late 80s. About 10 years ago my friend generously gave it back to me. When I went to use it, oddly the hinge broke, not the dust cover tab! I tried repairing it with CA glue, which didn’t work. I then used epoxy glue, which is still holding up fine. I replaced the cartridge about a year ago and did a full setup on the tonearm. It works perfectly.
Been using a SL-D3 bought NOS for $100, 20 years ago. Changed the Empire 1000 cart with the usual green AT, diyed my way to clean, lube and adjust and it has been my everyday ride. More than decent sound, fun and easy to use. Best buy. My other tt is a VPI MkIV, Audioquest PT9 arm and Ortofon 2m Blue.
I have the SL 3300 fully automatic (1978 I believe )and I love it. I bought it broken at a pawnshop for 90 bucks. After disassembling, getting rid of all the old, grease, regreasing, etc. it’s working mostly as new. I still have a few tweaks to do to it but it’s good enough. It’s amazing the quality of the motor and rotor assembly of these older decks. BTW it pairs very nicely with my 1978 NAD 3060 60 W per channel integrated amplifier. In addition to that I have a fairly mid/high range modern fully manual deck that I really love as well.
I have an SL-220 with a speed control that wouldn't stay on speed, just like yours. Cleaning the variable resistor helped for a while, but it came back. Then I put a small resistor in series with the variable resistor to shift the sweet spot, if you know what I mean. I eventually, years later, found the variable resistor on Digikey, and replaced it. 5 years later it is still spinning my records. The motor is NOT the problem.
I found a working Q300 at a thrift store for $30! Cleaned it up, new plug and play cartridge and now this is my workhorse for vintage vinyl. The Fluance get's to play the new vinyl but this semiautomatic Q300 is awesome for what I use it for. Having the semi-auto shut down is perfect for my style of putting on a record and walking away on a tangent. Dust cover has the tabs but the spring is loosing it's strength but manageable. Sound is what you would expect from a '80's era entry level but fine for vintage vinyl. It was hard to clean it up after 40 years and I did my best but she still shows some light corrosion on the aluminum surfaces. Overall, great #2 phono to compliment my nicer Fluance TT.
I couldn't afford the SL-D2 at the time (1980 college student) so had to settle for the D1 (fully manual). Still have it. Being fully manual it pretty much can't fail. It's now my backup since I received a Pioneer PL-530 as payment for servicing a guy's Sansui and Sherwood receivers. Love the channel.
Great video. With those early 80s models, there were three series. The belt drive B, the direct drive D, and the quartz locked direct drive Q. Then there was the level of automation with 1 being manual, 2 being semi auto, and 3 being fully auto. So a SL-D2 was direct drive semi auto, while a SL-B1 was manual belt drive. All are rugged workhorses.
A few years back I bought a used SL-1200 Mk5. It is a tank; weighs about 40 lbs and is all metal and rubber. Came to me with a completely shattered dust cover - luckily the new ones Technics makes for the GR line still fit. It also did not have the dust cover hinges, which I only found out later the SL-1200 Mk5 did not actually come with, since by then these were marketed to DJ's (the original SL-1200 and even Mk2 were marketed as high-end home players). And it was missing its original mat, which I found out later is actually important for the proper headshell angle - the original mat is about 1/2" thick and that height is required, because no amount of adjustment can account for a mat that's too thin. That thick mat also adds some mass to the already considerable platter, which helps control wow and flutter. I got a new dust cover, new hinges and found an original mat, oiled it up and it works and looks good as new, despite mine I'm pretty sure having endured real DJ use (again, the lack of dust cover hinges and thin felt mat I got with it). Perfect speed, W&F still within spec, all functions working as designed. Sounds perfect. Really satisfying turntable to use; just feels totally bulletproof, literally. Not all Technics turntables are built to quite the same standard, but I also have a much lower end Technics tape deck from the late 80's that I've done literally nothing to (not even a belt replacement) and it works fine. Even when Technics started cutting costs, they still got the basics right.
First good turntable I had was a Marantz, it had the issue with the up and down buttons. Replaced with a Technics SL-D5, solid linear turntable. I now have a Technics SL-Q1, linear turntable. I had to replace the tonearm drive belt, works great! Also own a Pioneer PL-518 and a Sansui SR-232. They have all had to have some maintenance when I bought them, but all working and sounding great now! If I knew how to work on turntables when I was younger I’d have kept the Marantz, it was a nice turntable too. I regret selling it for $5. in a garage sale. But back then, I was believing the CD hype that records were dead. I love my CD’s too, but I have always loved vinyl!
Fun video. I still have the SL-D2 bought new in 1980 and it's still in excellent conditions, even the matt is in great shape. The only issue is one hinge of the dust cover that has weakened and that prevents it from staying open on its own. The speed is accurate and it's never been serviced. It is a great table and built to last and even the specs are great. Plenty on eBay although prices are creeping up.
I have an SL-1600MK2 that the wife bought new in '79. It sat for 20 years, so I had to put the paddles to it. Major pain in the butt, but she's been working fine for the last 4 years. Honestly, it was a pain in the butt to work on, but it made my wife happy (happy wife, happy life lol).
Original owner of a SL 1100a/Shure V15 lll combo purchased in 1975 new for $350. Played extensively from date of purchase until mid 80’s when cassette/CD pushed it into the closet. Resurrected February this year as nostalgia kicked in and I rebuilt my two channel system…fired it up after close to four decades; ( after a couple of drops of long overdue oil that was stored under the platter from the factory) Runs as well and sounds as good as the day I pulled it from the box in 1975. When upgrade time comes, 1200 g for me. It’ll be worth every penny I blow on it. Technics TTs for life.
I own the SL-D2 and an SL-D202 and completely agree with what is said here. Simply solid work horses that just do their job perfectly. I replaced the cartridge on the D2 with an Ortophon 2M and didn't even have to re-setup the table other than just adjusting the tracking force. On the D202, I simply replaced the stylus. They're both perfect for enjoying my ever growing vinyl collection. With tables like these readily available, I do not understand why anyone would go for a new turntable in place of these, when it's most likely going to be technically and aesthetically inferior.
You remember at the beginning you said it going to be fun? Well, you were right! For certain, I will show the operation of the changer to my granddaughter. She has never seen even a record let alone a turntable. Guess I need to get a turntable---seeing it won't compare to hearing it.
I’ve been running a 1978 Kenwood KD-500 for years and love it. Threw a Sumiko Moonstone on a Grace G-840 tonearms. The setup has been solid and sounds great. Funny thing how much they pulled from Technics.
I'm the original owner of an SL-D202 that I bought in the mid to late 70s. Still works great, though I rarely use it. I have an in-line pre-amp so that I can feed it into my computer and "digitize" my LPs. The dust cover's hinges are fine, but, it has a crack in the middle-top; back in the early 80's, my wife had placed a vase on my stereo furniture. One time, when I had the volume cranked up high, the vibrations caused the vase to fall on it. That broke my heart, but I go over it.
I bought a Technics SL1800 MK2 last year at an estate sale. Came with the Stanton 681EEE-S cartridge. Sounds amazing. It is similar to the 1200 MK2 but sits on a suspended chases.
Thanks for the run down. I still have my Techincs SL-D202 that I bought in 1981. Still rocks along with the Bose 301's (re-foamed) and yes, a Hitachi amplifier that I bout at the same time.
I know how you feel about Technics turntables, and I feel the same way about Dual. I have several vintage Duals which have never been serviced and still function beautifully! Love my CS-5000s and my Golden One. And, my CS-506 has worked perfectly since new.
Somehow I had not seen this video! I am happy to share my 1979 Technics SL-3300 still works perfectly. They were very well built. Mine has never been serviced. Love it. It was fun watching this video. Thanks. In my bucket list, come to Iowa sometime and visit your store. Big fan.
My first direct-drive turntable was a Panasonic SL-1100 manual they brought out as a reference design. I bought this around 1963, before Technics existed, to replace my Dual 1219. When I decided to upgrade the tonearm I had to get a new mounting plate, so it now proclaims that it is a Technics. But i know better and still have the original Panasonic box for it. A few years ago, I decided to bring it out again. It was a bit gummed up, but it didn't take long to get it in like-new working condition. It is an incredibly high quality product and has replaced my Linn Sondek LP-12. I suspect that I'll recondition my Dual and Linn Sondek when I get some time, but there isn't any rush with the SL-1100 working again.
01:31 Ha, that's the one I grew up with, the SL-1900. Still is in service at my mother's place and I already had to clean out the hardened grease and re-lubricate it, runs perfect ever since.
I have an SL-Q300 that I was given new in the 80's while in high school. My first, and present, turntable. It sat in storage for about 8-10 years until last year. Still worked great other than needing a new cartridge! (and some cleaning!) both hinges are in fantastic shape. I don't plan on giving it up! The only issue I have started to have recently is that the tone arm sometimes starts a little too far in and then doesn't return automatically. I think there is an adjustment near the base of the tone arm, from what I have heard! My heart skipped when that 2nd LP looked like it was going to fall on the tone arm! LOL! Love the channel!!
I still have my SL-1210 MK2 with the dust cover and everything, the box and manual. It works like new. I have an automatic SL-D2 for my room so I can fall asleep on my favourite record.
Hi Kevin, great video on these Technics. I knew I was not going mad!, about 3yrs back when I looked at vintage TT's I fell in love with the SL-B2 for many of the same reasons as your models here, same production era. I've sourced 4 of them each for under £100/150 partially or completely serviced/varied dustcovers. Put a quality cartridge/stylus on them, set up with a good amp/speakers and they sound top TOP quality. Shame Technics did'nt carry on with belt drives next to there direct drive tech.
I own a few Technics tables The SL-2000, SL-Q3 & the SL-1200 mkII. The automatic start for 7” records tends to act up when startup occurs. Other than that they all work well.
I just cleaned up my SL-D30 table which I bought in 1982, very similar P mount. Exact issue with hinges. Loctite makes Cyanoacrylate Plastic Bonder and I had success fixing the hinges. 8 months so far and they have not cracked. I gave it to my 13 year old son who is getting into vinly.
My SL-Q200 has be rock solid since I bought it in 1983. I even have the original Audio Technica DR400E with its cover - spot on with the dust cover hinges fortunately for me the hinge snapped, but the tabs held.
Great video I'm not in the stackers but when I was a kid in this mid-60s my sister's boyfriend had an admiral Council it was a tube Council stereo and the turntable when the side one ended his arm came out Half Moon shaped arm with rubber on it picked up the record and flipped it over and played the other side I've never seen another one in my life this was in 1966 it was super cool the console sounded fantastic head two monoblock two amplifiers I did research I can't find anything about such a thing but it was cool have a great day thanks
I have a 1977 Technich SL-1710 as with a new elips Tonar Element/Cardrige/Needle but my daily driver is my 1974 Aristona 1312(Philips 312) with a new elips Tonar Element/Cardrige/Needle. The Technish has an after market light atached to the dust cover on the left side, probably for when the lights are down when people are in a romantic mood back in the day.
I have several vintage techniques turntables. The only one that doesn't have broken dust cover tabs is the one that I bought brand new in the 90s. However, I have some that still have nubbins of tabs left in them. Just enough so they would sort of stay in if you didn't move it. I was able to drill tiny holes through the clip into the cover and hold the cover in place with a tiny screw. That method has worked great and I plan to fix several others that way. You just have to make sure to remove the screws before trying to rip off the desk cover.
Ihave the D-2 nice turntsble...semisuto...but I owm a 1200MK2 too and Pioneer 500...D2 with an ortfon xart...pioneer with ortofpn blue...MK2 with MC cart...❤
I recently bought a Technics SL-QL1 turntable, an ST-S6 tuner, an SH-8020 equalizer and an SU-V9 amplifier at an estate sale. Silver and in excellent condition visually, but no cords. Not sure what happened to them, but they were missing. I definitely need to put some effort into finding replacements.
I still use my SL1300 bought in the early 70s. It’s been a rock it’s got reenforced metal hinges and a Stanton 681 EEE cartridge I don’t let any dust get on the clear cover. I’ve only had to make one small adjustment under the platter. Is this model worth a good amount also? I finally got rid of my last LP. I hundreds. I made Cassettes, then CDs so I could listen to them in my car. SL1300 should probably be on your list.
I had a record changer back in the early 70's. It was a cheapo "Electrophonic" but it had a hook shaped arm that sat on top of the record stack that kept the records from wobbling around while they hovered above the platter. I think all of the changers had that feature and, unlike the rest of the unit, it always functioned perfectly due to its simplicity.
I have had 20 Technics tables. I agree with you about the P-mount tables, they are super reliable. I also really enjoy the MK I SL 1300-1500 series and the MK I SL 1600-1800 series. I have several MK2 of those series that are yet to be repaired. :(
I've only owned 2 turntables in my life, both were Technics, my first was a SL 220 in 1978.. never had an issue with either of them, except for replacing the rubber belt which ages out.. I think the only issue with the stackable turntable you demonstrated was it probably wasn't used for a long time, so like lots of these Technics turntables, the best thing you can do is use them often
I worked at the Technics wholesaler in 1975. There was a SL-1100 in the box sitting on the warehouse floor getting dusty. I wanted to take it home to just you know Try it Out!
Sometimes they just need to stretch a little bit and warm up, especially if they haven't been used for a while. Then service if/where/when necessary. Nice job and thanks again.
Looking at those old turn tables reminds me of a spinning my dads copy of Dire Straits self titled in the living room. I think the player is still sitting in the living room. Broken dust cover as well.
I have a Technics SL-210 which is the manual version of the SL-220 that someone gave me for free years ago because the motor didn’t work. I kept it in my attic and used the headshell for another turntable. A couple years ago I decided to see what it would take to get it running again. Turns out all it needed was a bit of oil in the capstan. Once I did that it ran with a rock-solid speed. I’d try that to see if it fixes the motor on that SL-220. Just drop some oil down the capstan shaft (no need to disassemble anything) and turn it manually to work it down into the motor. Do that until it finally runs on its own. The oil I used is Super Lube 51010.
1600 mk IIs are a high-end version, with a separate motor to drive the semiautomatic tonearm. The belt goes, but they aren't hard to find. I have a gorgeous one.
I have an SL-Q303. which is the S shaped arm version, full auto. Flawless. You need to clarify on speed. This video appears to be for beginners. You need to explain what a pot is. Don't take it for granted. Also, you might want to differentiate between the d1, d2, and d3.
The first audio component I bought, was a SL1600MK2. I was 14 and it was 1989. Paid 175$. Bought it out of The Oregonian classifieds. The owner came and picked me up in his El Camino to come to his house and check it out. THAT wouldn't happen these days 😅😅
I sold all 4 of my vintage Yamaha, Technics and Pioneer tables. They were all auto or semi-auto with various little problems. With no service techs in my area and the high cost to ship them out, they just weren’t worth it. Bought new and happy spinning again.
I've had Technics turntables in the past and I've been pleased with them. However, I'm not letting go of my Empire troubadour turntable. It has both eye and ear appeal and is built like the Rock of Gibraltar. (I might have wished that Empire's cartridges were a worthy match to their turntable, though.)
Great info.. How about Technics linier tracking recommendations, and pitfalls. So cool with discman capabilities. I carefully packed to move a few+ turntables, but under thought the great conditioned cover hinges. The gamble of storing/keeping classics.
A few years ago I remember repairing a high-end Technics turntable...I can't recall its model number but it was called "The Granite" due to its finish. I traced the fault to a damaged j/k flip flop in its direct drive commutation stage. It had been to two shops before it came to me...I got my not high wage per hour, and the customer likely paid a bit more. I wish there was a demand for fault finding and repair now.
Technics is the Toyota of turntables, solid, popular and reliable.
That's a good description.
And the SL1200s are the Land Cruisers.
Anything on the Sl-l2 folks? Can pick one up for 75$. Claims it worked last time they used it.
as a mechanic wanting to get into vinyl this was all it takes to convince me
@@sirlorax9744 then you know, Google SL1200s, they were the working decks for DJs for years. I've been using my original pair of SL1200M5Gs since the early 2000's. I also daily a 2009 76 Series Land Cruiser. They are the same quality and simplicity.
$15.00 pandemic era Technics SL-1500 yard sale pick up here. I had it serviced and replaced the RCA cables and ground wire with new because the originals were damaged in a fire, some caps were also replaced. It works 100% today.
I have my dad’s Technics sl-5300 from 1979, the year I was born, and it runs perfect!
Picked up a SL-1600 for $50 at an estate sale last year primarily because it had a grado f3 cart, I was going to put it on my sl-1200 but I plugged it in and hooked it up to my marantz 2275 and it’s been there ever since the automatic start and stop still works flawlessly
You stole that! I have an SL-1600MK2 myself - great turntable!
Bought my first Technics in 1976, a Technics SL3200. It still runs perfectly today, 48 years later (except the strobe is burned out). A couple years later I bought a Technics SL3300 and still have that 46 years later. Everything works perfectly. I spin records 12 hours a day, and longer on weekends, and these workhorses are still running at perfect speed, with not one single issue with either table. There's a reason they are so highly regarded!
I purchased a sl-1800 MK1 last week and love this thing! Solid performance, suspended platter makes it a very quiet turntable. I did preventive maintenance by de-oxit all the pots, cleaned and relubed the spindle and thrust plate, cleaned and relibed the tone arm lift piston and she runs like a top. Solid turntable and beats any modern turntable today under 1K
I have my original Technics SL-D2 with an AT155LC cartridge. My youngest musician son was able to find a nice D2 for his system and he loves it. Technics turntables indeed.
I now have three early 80s Technics tables, all linear trackers. The iconic SL7, the SL- Q15 and the SL-L1. They all needed work to get fully operational but I absolutely love them. They are just so convenient and sound great. I have a Clearaudio Performance SE and a MoFi Studio deck, but increasingly find myself going to the Technics for my vinyl fix. My son has the SL-L1 in his flat and uses it all the time.
So, I found a SL-230 at a garage sale last year for basically free, took it home and thus began my journey into vintage audio. I went ahead and disassembled the deck and got all of the automatic functions working, including the repeat function. Based on this success, I felt emboldened to start looking at vintage receivers. Since then, it has become an obsession and I've refurbished a few other turntables as well as a number of receivers. I am now in the process of building out a home hi-fi listening room for some of my favorite pieces.
This journey led to me finding Skylabs Audio. Kevin, you do a great job on these videos and I really appreciate your commitment. To everyone, get out and support Skylabs Audio. I've personally purchased a number of t-shirts, not that I needed any more, but just to show my support to Kevin and the entire team! Keep up the good work!
I kept my SL D2 from 1980. That table with a Shure V-15 type 4 was an absolute sonic bang for buck combo.
SL-D2 is a great tt
I love their linear tracking models, I have an SL-J33 (silver) that I got used and cleaned up, lubricated and replaced a couple of the feet. Works great, just close the lid and press play.
I own 5 vintage turntables, from Thorens to Duel. My daily player is my Technics SL -1900.
Love it!
Same here. I have 4 vintage turntables and the one I use most is my SL-1900. It was my father's table but I probably used it more than him back in the 70s and 80s. I have done normal maintenance on it and it still works perfectly.
Good choice!
Have had an SL-1900 since I bought it new in 1978. Never a reason to buy anything else.
Bought one refurbished last year. Upgraded with concorde DJ element and Dr. Suzuki slipmat. Use it for sampling and playing records. Cool.
I have an SL-1900 I took a chance on from ebay. I was lucky that it only needed some basic maintenance and adjustment. Great table and it looks sharp too.
I still have my SL-1800. Love it. Direct Drive, fully manual Turn Table...
I still have my 1974 Technics SL-1300 and 1975 SL-1350. Each has been serviced twice and and utilize my vintage high end Audio Technica cartridges with ease. Love 'em!
I have the Technics SLQ-200, I had purchased in October of 1983. I had not used it for several years from about 1990 to 2021. Pulled it out, cued up a record and it still worked perfectly! I paid $109.99 from a local retailer. I did have a dust cover get broken (cracked) when someone set something on it. Got a replacement and had the same problem a year later. Great equipment!
Thanks for sharing!
I bought a 1950 for $60 from a second-hand store two years ago and it still plays great! Did not come with the changers/spindles, but not sure I would use them anyway. The only problem is the dust cover won't stay up on it's own. I just take it off when I'm using it and put it back on when I'm done. Great machine!
Technics has always been a great value. I started with a SL-23 back in the 70’s and the reliability got me hooked on them. I love the linear trackers. My living room set-up includes a recapped SL-10 with the original moving coil EPS-310. The linear trackers aren’t for everyone, you should be prepared to do the tech work to make them functional. Overall, I have been lucky to own both ends of the Technics line and many in between.
Couldn't agree more!
Agree. I have an SL-7, an SL-QL15 and an SL-L1. All great, though the SL-7 is my favourite. Built like a tank and I found someone in the UK who 3d prints the wedge stands for it, so it looks fantastic. They all needed work, but it was all basic mechanical and cartridge stuff. Happily the electronics have behaved themselves so far.
My biggest regret was getting rid of my Linear tracker back when styluses were IMPOSSIBLE to find if i had known there we would be able to buy BRAND NEW stylus for LONG DEAD Carts from GOOD manufacturers i would have SEARIOUSLY held on to it
I paid $20 for a complete Technics SL-D3 at a garage sale a couple months ago - sounds great!
He is 100% correct regarding the 1980s Technics tts.
They just work.
They're easy to repair and parts are abundant and most importantly the sound is on point and clean
My father-in-law gave me his MCS-6800 24 track programmable 6-album turn table recently. I was AMAZED that it works just like new. Luckily the belt fell off a long time ago and was still in great condition. I just ordered new belts and stylus for it.
Ohh boy what a nostalgia rush!
I remember back in the day when Technics wanted to discontinue the SL1200 series, and we DJ'S collected signatures, and got them to change their mind. The SL1210MK2 was the best turntable i've ever owned. Rugget and stable like nothing else!
I’ve had a few 1980s Technics, regretted selling them. I now own 2 Technics 1200s MK2 purchased brand new in 1999 & they are like brand new today, still have the original boxes with the manuals still in the envelopes, the rubber platter mats are still in the paper unused, complete with the extra weights for the back of the tonearm & the stylus hangover tools. Bulletproof turntables.
I LOVE the 1200 MKII It took me YEARS of hunting to find one, got it a a estate sale for $18 3 years ago it run performs great but 2 of the resistors get pretty hot and I am trying to track down the cause, they seem to be a common fail points because MOST of the 1200's I see online have a Bubble under the Platter on the plastic dust cover in THE SAME SPOT but NONE of the techs online EVER talk about what cause that failure gotta protect that revenue I guess
I'm still using my SL-Q3 that I got in 1981 on Okinawa, Japan when I was in the Marines.
Picked up a SL D2 for 50 bucks with lid in tact. Have had it for several years and plays great.
I bought a filthy SL-D2 at a yard sale for 5.00 brought it home and spent about 2 hours cleaning and lubing and it works like a champ
For those of you possibly looking at a new Technics, I bought an SL-1210 GR for about $450 off due to the GR2 coming out! If you see one in stock at a reputable online dealer, it doesn’t hurt to ask. I bought the second to last one at Sweetwater.
I learn some things here, but i find just listening to the video to be stress relieving. Such a relaxed tone.
Got from orginal owner Technics MA1 rosewood plinth automatic just lubed & replaced cartridge & stylus. Got a SL-V5 vertical model from retired Technics dealer which looks great with picture records. Got a restored !600 mk2 , guy got from Japan & cleaned & relube , clean tone arm assembly, new tone arm gear & belt. lubed motor. A beauty with suspended platter & tone arm. Got J33 programable linear compact linear clean ,lubed & new belt for linear .
I got a Dual 621 from the 70ths and I love it. I know you dont recomment full automatics, but fo me the automatic function is a must. And when I bought it, the automatic function was also not working, but I repaired it myself.
I own a Technics Sl-1200 MK2 from 1994 and I love everything about it.
I bought an SLD202 around 1981 for $200 Canadian. I sold it to a friend when I went to CDs in the late 80s. About 10 years ago my friend generously gave it back to me. When I went to use it, oddly the hinge broke, not the dust cover tab! I tried repairing it with CA glue, which didn’t work. I then used epoxy glue, which is still holding up fine. I replaced the cartridge about a year ago and did a full setup on the tonearm. It works perfectly.
Been using a SL-D3 bought NOS for $100, 20 years ago. Changed the Empire 1000 cart with the usual green AT, diyed my way to clean, lube and adjust and it has been my everyday ride. More than decent sound, fun and easy to use. Best buy. My other tt is a VPI MkIV, Audioquest PT9 arm and Ortofon 2m Blue.
I have the SL 3300 fully automatic (1978 I believe )and I love it. I bought it broken at a pawnshop for 90 bucks. After disassembling, getting rid of all the old, grease, regreasing, etc. it’s working mostly as new. I still have a few tweaks to do to it but it’s good enough. It’s amazing the quality of the motor and rotor assembly of these older decks. BTW it pairs very nicely with my 1978 NAD 3060 60 W per channel integrated amplifier.
In addition to that I have a fairly mid/high range modern fully manual deck that I really love as well.
I have an SL-220 with a speed control that wouldn't stay on speed, just like yours. Cleaning the variable resistor helped for a while, but it came back. Then I put a small resistor in series with the variable resistor to shift the sweet spot, if you know what I mean. I eventually, years later, found the variable resistor on Digikey, and replaced it. 5 years later it is still spinning my records.
The motor is NOT the problem.
I own a sl q300, paid $40 at a pawn shop, needed an adjustment of the cartridge wiring, bingo! Perfect for last ten years
I found a working Q300 at a thrift store for $30! Cleaned it up, new plug and play cartridge and now this is my workhorse for vintage vinyl. The Fluance get's to play the new vinyl but this semiautomatic Q300 is awesome for what I use it for. Having the semi-auto shut down is perfect for my style of putting on a record and walking away on a tangent. Dust cover has the tabs but the spring is loosing it's strength but manageable. Sound is what you would expect from a '80's era entry level but fine for vintage vinyl. It was hard to clean it up after 40 years and I did my best but she still shows some light corrosion on the aluminum surfaces. Overall, great #2 phono to compliment my nicer Fluance TT.
I recently picked up a sl-q300 in near mint condition for $25, best purchase i’ve made in a long while
I have a SL-QD3 I got in the early 80’s. I need to go through it this video has inspired me. Thank you.
I couldn't afford the SL-D2 at the time (1980 college student) so had to settle for the D1 (fully manual). Still have it. Being fully manual it pretty much can't fail. It's now my backup since I received a Pioneer PL-530 as payment for servicing a guy's Sansui and Sherwood receivers. Love the channel.
My favorite is the SL-Q3 I have several of them, dead reliable,, spot on accurate speed and well built.
Great video. With those early 80s models, there were three series. The belt drive B, the direct drive D, and the quartz locked direct drive Q. Then there was the level of automation with 1 being manual, 2 being semi auto, and 3 being fully auto. So a SL-D2 was direct drive semi auto, while a SL-B1 was manual belt drive. All are rugged workhorses.
A few years back I bought a used SL-1200 Mk5. It is a tank; weighs about 40 lbs and is all metal and rubber. Came to me with a completely shattered dust cover - luckily the new ones Technics makes for the GR line still fit. It also did not have the dust cover hinges, which I only found out later the SL-1200 Mk5 did not actually come with, since by then these were marketed to DJ's (the original SL-1200 and even Mk2 were marketed as high-end home players). And it was missing its original mat, which I found out later is actually important for the proper headshell angle - the original mat is about 1/2" thick and that height is required, because no amount of adjustment can account for a mat that's too thin. That thick mat also adds some mass to the already considerable platter, which helps control wow and flutter. I got a new dust cover, new hinges and found an original mat, oiled it up and it works and looks good as new, despite mine I'm pretty sure having endured real DJ use (again, the lack of dust cover hinges and thin felt mat I got with it). Perfect speed, W&F still within spec, all functions working as designed. Sounds perfect. Really satisfying turntable to use; just feels totally bulletproof, literally.
Not all Technics turntables are built to quite the same standard, but I also have a much lower end Technics tape deck from the late 80's that I've done literally nothing to (not even a belt replacement) and it works fine. Even when Technics started cutting costs, they still got the basics right.
First good turntable I had was a Marantz, it had the issue with the up and down buttons. Replaced with a Technics SL-D5, solid linear turntable. I now have a Technics SL-Q1, linear turntable. I had to replace the tonearm drive belt, works great! Also own a Pioneer PL-518 and a Sansui SR-232. They have all had to have some maintenance when I bought them, but all working and sounding great now! If I knew how to work on turntables when I was younger I’d have kept the Marantz, it was a nice turntable too. I regret selling it for $5. in a garage sale. But back then, I was believing the CD hype that records were dead. I love my CD’s too, but I have always loved vinyl!
Fun video. I still have the SL-D2 bought new in 1980 and it's still in excellent conditions, even the matt is in great shape. The only issue is one hinge of the dust cover that has weakened and that prevents it from staying open on its own. The speed is accurate and it's never been serviced. It is a great table and built to last and even the specs are great. Plenty on eBay although prices are creeping up.
Thanks for sharing!
@@skylabsaudio You're very welcome, I just wish you were closer, I live on Long Island, and I'd be paying visits quite often to your great store.
I have an SL-1600MK2 that the wife bought new in '79. It sat for 20 years, so I had to put the paddles to it. Major pain in the butt, but she's been working fine for the last 4 years. Honestly, it was a pain in the butt to work on, but it made my wife happy (happy wife, happy life lol).
Couldn't agree more, have a SL-M3, SL-1100, SL-D2 insanely reliable!
Original owner of a SL 1100a/Shure V15 lll combo purchased in 1975 new for $350. Played extensively from date of purchase until mid 80’s when cassette/CD pushed it into the closet. Resurrected February this year as nostalgia kicked in and I rebuilt my two channel system…fired it up after close to four decades; ( after a couple of drops of long overdue oil that was stored under the platter from the factory) Runs as well and sounds as good as the day I pulled it from the box in 1975. When upgrade time comes, 1200 g for me. It’ll be worth every penny I blow on it. Technics TTs for life.
I love my SL-2000! I've had many Technics turntables over the years.
I own the SL-D2 and an SL-D202 and completely agree with what is said here. Simply solid work horses that just do their job perfectly. I replaced the cartridge on the D2 with an Ortophon 2M and didn't even have to re-setup the table other than just adjusting the tracking force. On the D202, I simply replaced the stylus. They're both perfect for enjoying my ever growing vinyl collection. With tables like these readily available, I do not understand why anyone would go for a new turntable in place of these, when it's most likely going to be technically and aesthetically inferior.
You remember at the beginning you said it going to be fun? Well, you were right! For certain, I will show the operation of the changer to my granddaughter. She has never seen even a record let alone a turntable. Guess I need to get a turntable---seeing it won't compare to hearing it.
I’ve been running a 1978 Kenwood KD-500 for years and love it. Threw a Sumiko Moonstone on a Grace G-840 tonearms.
The setup has been solid and sounds great. Funny thing how much they pulled from Technics.
Great video I have still have my Technics SLD2 from new and it works great also have a Phillips 212 electronic that I purchased new that still works
My Technics SL-D303, came out of a dumpster. Works just fine.
I'm the original owner of an SL-D202 that I bought in the mid to late 70s. Still works great, though I rarely use it. I have an in-line pre-amp so that I can feed it into my computer and "digitize" my LPs. The dust cover's hinges are fine, but, it has a crack in the middle-top; back in the early 80's, my wife had placed a vase on my stereo furniture. One time, when I had the volume cranked up high, the vibrations caused the vase to fall on it. That broke my heart, but I go over it.
I bought a Technics SL1800 MK2 last year at an estate sale. Came with the Stanton 681EEE-S cartridge. Sounds amazing. It is similar to the 1200 MK2 but sits on a suspended chases.
Thanks for the run down. I still have my Techincs SL-D202 that I bought in 1981. Still rocks along with the Bose 301's (re-foamed) and yes, a Hitachi amplifier that I bout at the same time.
I know how you feel about Technics turntables, and I feel the same way about Dual. I have several vintage Duals which have never been serviced and still function beautifully! Love my CS-5000s and my Golden One. And, my CS-506 has worked perfectly since new.
Yeah, Duals are in up there too for sure
Somehow I had not seen this video! I am happy to share my 1979 Technics SL-3300 still works perfectly. They were very well built. Mine has never been serviced. Love it. It was fun watching this video. Thanks. In my bucket list, come to Iowa sometime and visit your store. Big fan.
I have SL3300 as well fully functional and I love it❤️❤️❤️
My first direct-drive turntable was a Panasonic SL-1100 manual they brought out as a reference design. I bought this around 1963, before Technics existed, to replace my Dual 1219. When I decided to upgrade the tonearm I had to get a new mounting plate, so it now proclaims that it is a Technics. But i know better and still have the original Panasonic box for it. A few years ago, I decided to bring it out again. It was a bit gummed up, but it didn't take long to get it in like-new working condition. It is an incredibly high quality product and has replaced my Linn Sondek LP-12. I suspect that I'll recondition my Dual and Linn Sondek when I get some time, but there isn't any rush with the SL-1100 working again.
01:31 Ha, that's the one I grew up with, the SL-1900. Still is in service at my mother's place and I already had to clean out the hardened grease and re-lubricate it, runs perfect ever since.
Thanks for the great advice.
Thank you!
I have an SL-Q300 that I was given new in the 80's while in high school. My first, and present, turntable. It sat in storage for about 8-10 years until last year. Still worked great other than needing a new cartridge! (and some cleaning!) both hinges are in fantastic shape. I don't plan on giving it up! The only issue I have started to have recently is that the tone arm sometimes starts a little too far in and then doesn't return automatically. I think there is an adjustment near the base of the tone arm, from what I have heard! My heart skipped when that 2nd LP looked like it was going to fall on the tone arm! LOL! Love the channel!!
Thank you!
Have my Technics sl1800 mk2 since 77. love it.
I just purchased an excellent condition Technics SL-D2
Can't wait for delivery
I still have my SL-1210 MK2 with the dust cover and everything, the box and manual. It works like new. I have an automatic SL-D2 for my room so I can fall asleep on my favourite record.
Love them. Been gifted an SL-7 and an SL1410 MK2. Both work great.
Hi Kevin, great video on these Technics. I knew I was not going mad!, about 3yrs back when I looked at vintage TT's I fell in love with the SL-B2 for many of the same reasons as your models here, same production era. I've sourced 4 of them each for under £100/150 partially or completely serviced/varied dustcovers. Put a quality cartridge/stylus on them, set up with a good amp/speakers and they sound top TOP quality. Shame Technics did'nt carry on with belt drives next to there direct drive tech.
I own a few Technics tables
The SL-2000, SL-Q3 & the SL-1200 mkII. The automatic start for 7” records tends to act up when startup occurs.
Other than that they all work well.
I just cleaned up my SL-D30 table which I bought in 1982, very similar P mount. Exact issue with hinges. Loctite makes Cyanoacrylate Plastic Bonder and I had success fixing the hinges. 8 months so far and they have not cracked. I gave it to my 13 year old son who is getting into vinly.
Thanks for the info!
I have that exact Turnable, I bought it a few years ago at a thrift store for 30 bucks!
lucky kid!
My SL-Q200 has be rock solid since I bought it in 1983. I even have the original Audio Technica DR400E with its cover - spot on with the dust cover hinges fortunately for me the hinge snapped, but the tabs held.
Great video I'm not in the stackers but when I was a kid in this mid-60s my sister's boyfriend had an admiral Council it was a tube Council stereo and the turntable when the side one ended his arm came out Half Moon shaped arm with rubber on it picked up the record and flipped it over and played the other side I've never seen another one in my life this was in 1966 it was super cool the console sounded fantastic head two monoblock two amplifiers I did research I can't find anything about such a thing but it was cool have a great day thanks
Back in time the Technics SL-220 is what I chose. Not high end but very capable. I'm glad to see it on the lineup on this video.
I have a 1977 Technich SL-1710 as with a new elips Tonar Element/Cardrige/Needle but my daily driver is my 1974 Aristona 1312(Philips 312) with a new elips Tonar Element/Cardrige/Needle. The Technish has an after market light atached to the dust cover on the left side, probably for when the lights are down when people are in a romantic mood back in the day.
Still have my old SL BD20 P Mount that still works as it did when I bought it several decades ago.
I have several vintage techniques turntables. The only one that doesn't have broken dust cover tabs is the one that I bought brand new in the 90s.
However, I have some that still have nubbins of tabs left in them. Just enough so they would sort of stay in if you didn't move it. I was able to drill tiny holes through the clip into the cover and hold the cover in place with a tiny screw.
That method has worked great and I plan to fix several others that way.
You just have to make sure to remove the screws before trying to rip off the desk cover.
Ihave the D-2 nice turntsble...semisuto...but I owm a 1200MK2 too and Pioneer 500...D2 with an ortfon xart...pioneer with ortofpn blue...MK2 with MC cart...❤
I recently bought a Technics SL-QL1 turntable, an ST-S6 tuner, an SH-8020 equalizer and an SU-V9 amplifier at an estate sale. Silver and in excellent condition visually, but no cords. Not sure what happened to them, but they were missing. I definitely need to put some effort into finding replacements.
I'm not sure when the last time was that I had so much fun! Watching the record changers drop/not drop around 22:00 was the best! Technics rule!!!
I'm so glad I bought a new turntable after watching this.
I have Technics sl bd20 I've had it for quite a few years haven't had too many problems with it and I still enjoy it
My daily is Technics SL-M3, love the sound
I still use my SL1300 bought in the early 70s.
It’s been a rock it’s got reenforced metal hinges and a Stanton 681 EEE cartridge I don’t let any dust get on the clear cover. I’ve only had to make one small adjustment under the platter.
Is this model worth a good amount also?
I finally got rid of my last LP. I hundreds. I made Cassettes, then CDs so I could listen to them in my car. SL1300 should probably be on your list.
I had a record changer back in the early 70's. It was a cheapo "Electrophonic" but it had a hook shaped arm that sat on top of the record stack that kept the records from wobbling around while they hovered above the platter. I think all of the changers had that feature and, unlike the rest of the unit, it always functioned perfectly due to its simplicity.
I have had 20 Technics tables. I agree with you about the P-mount tables, they are super reliable. I also really enjoy the MK I SL 1300-1500 series and the MK I SL 1600-1800 series. I have several MK2 of those series that are yet to be repaired. :(
Twenty? Wow!
I have an SL-1100A that I inherited. The only thing I've done to it is change the needle.
I've only owned 2 turntables in my life, both were Technics, my first was a SL 220 in 1978.. never had an issue with either of them, except for replacing the rubber belt which ages out.. I think the only issue with the stackable turntable you demonstrated was it probably wasn't used for a long time, so like lots of these Technics turntables, the best thing you can do is use them often
As always, I agree! Thanks for watching!
D2 my favourite nice weight look and function even someone as inept as me can refurbish to great playing form
I worked at the Technics wholesaler in 1975. There was a SL-1100 in the box sitting on the warehouse floor getting dusty. I wanted to take it home to just you know Try it Out!
Yeah the 1100s are one of my favs for sure!
I have a SL1650 changer, works great sounds great!
Sometimes they just need to stretch a little bit and warm up, especially if they haven't been used for a while. Then service if/where/when necessary.
Nice job and thanks again.
Very true!
Looking at those old turn tables reminds me of a spinning my dads copy of Dire Straits self titled in the living room. I think the player is still sitting in the living room. Broken dust cover as well.
I have a Technics SL-210 which is the manual version of the SL-220 that someone gave me for free years ago because the motor didn’t work. I kept it in my attic and used the headshell for another turntable. A couple years ago I decided to see what it would take to get it running again. Turns out all it needed was a bit of oil in the capstan. Once I did that it ran with a rock-solid speed. I’d try that to see if it fixes the motor on that SL-220. Just drop some oil down the capstan shaft (no need to disassemble anything) and turn it manually to work it down into the motor. Do that until it finally runs on its own. The oil I used is Super Lube 51010.
I love my technics SL 1600 fully automatic it’s a beast
I adore my SL-1600 Mk2, too. The weight, the look & the sound. It performs flawlessly.
1600 mk IIs are a high-end version, with a separate motor to drive the semiautomatic tonearm. The belt goes, but they aren't hard to find. I have a gorgeous one.
I have an SL-Q303. which is the S shaped arm version, full auto. Flawless. You need to clarify on speed. This video appears to be for beginners. You need to explain what a pot is. Don't take it for granted. Also, you might want to differentiate between the d1, d2, and d3.
The first audio component I bought, was a SL1600MK2. I was 14 and it was 1989. Paid 175$. Bought it out of The Oregonian classifieds. The owner came and picked me up in his El Camino to come to his house and check it out. THAT wouldn't happen these days 😅😅
Wow. Now that's a motivated seller!
I sold all 4 of my vintage Yamaha, Technics and Pioneer tables. They were all auto or semi-auto with various little problems. With no service techs in my area and the high cost to ship them out, they just weren’t worth it. Bought new and happy spinning again.
Great stuff here!! I had a SL-D2!! I wish I had never let it go!! I would be interested getting another!! I'll have to call you!!
I've had Technics turntables in the past and I've been pleased with them. However, I'm not letting go of my Empire troubadour turntable. It has both eye and ear appeal and is built like the Rock of Gibraltar. (I might have wished that Empire's cartridges were a worthy match to their turntable, though.)
Great info.. How about Technics linier tracking recommendations, and pitfalls. So cool with discman capabilities. I carefully packed to move a few+ turntables, but under thought the great conditioned cover hinges. The gamble of storing/keeping classics.
A few years ago I remember repairing a high-end Technics turntable...I can't recall its model number but it was called "The Granite" due to its finish. I traced the fault to a damaged j/k flip flop in its direct drive commutation stage. It had been to two shops before it came to me...I got my not high wage per hour, and the customer likely paid a bit more. I wish there was a demand for fault finding and repair now.