Your license plate trim say’s #boosted pls explain #show&tell I’m Thinkin about boosting or supercharging mines… any information or fingers pointing in the rght way?
@@MegaLeonidovich oh yeah Ohk, I’m Thinkin about boosting mines or supercharging it #needforspeed I need more horsepower and torque. I’m trying to look for an Acura shop in my area rght now, suspension and performance upgrades on the way…
Great looking MDX, I want to do the same wheel on my 19 MDX but it isn't available anywhere. I did find a 21 inch in a similar style and specs I might give a shot and can hopefully get a 265/40/21 for a little more tire🤞
Bro it’s a badass mix. How many inches did u drop front n back and what was the name again of the coil over u used and you said those are 22 inch rims. U should also make a video on daytime to appreciate the suv more.
1) do you used spacers in the front and the back or only on the back? 2) how many inches you lowered the coilovers max or how much in each front and back. 3) when go to a gas station do you scrape going in tru the sidewalk ramp?? Here in ny gas station ramp are very high
This is link to info on the front bumper lip/trim....www.curryacuraparts.com/oem-parts/acura-bumper-trim-sport-front-8p46tz5200a?c=bD0xJm49U2VhcmNoIFJlc3VsdHM%3D
No, the car does not jump at all very good comfortable ride, the coilover struts have damping adjustment system to control comfort of ride, there are many coilovers with this type of system
@@MegaLeonidovich nice! Which are yours that put on that MDX I wanna do the same thing!! I had 2015 MDX set on 22-10.5 vossen and 35 profile on tires!! Is yours rubbing?
Hey looks very nice. Can I ask what size tire you’re running, and did you use the super low BC coils or standard? How many inches is this lowered? Thanks in advance, looks perfect 👌🏼
Looks super nice!! Are you able to adjust the rear dampers while installed in the car? I’ve heard from other people that once they are installed you can not access the rear top to get to the knob.
I had shop install the suspension for me so I don't know if that is possible, I do know that you will have to take off whole rear interior side panel to get to coils and that is a lot of work.
I am not sure about the 2010 but 22s work good on the 2014 and newers models, maybe check with local wheel tire shop, and if you want to lower your car or not, I lowered my car with 22s and it works great
Thank you, yes this front lip is original factory Acura aero kit..... www.acurapartsforless.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?origin=pla&gclid=CjwKCAjw1uiEBhBzEiwAO9B_Hf9mSMq7WQ8JVaaWLa0hOOBGV-6CuL6ULEe-rL5kY_PSiXLHhx-qYxoCJs0QAvD_BwE
Thank you, no I didn’t roll fenders at all, wheels clear just perfect plush car is now lowered all the way and have a small gap between wheels and fenders
Damn this mdx is sexy as hell !! I have the same one but white. It was fresh until I had 3 idiots hit me , 3 different times. In 3 months. Yes, 3 months. Back to back. They also hit me and took off. That’s how these animals are here in Philly. I’m going to do something similar to mine one I get all the body parts I need. Btw I heard you said you have coil overs , how does it ride on those ?
Yo, thank you, no, no vibrations at all its actually pretty smooth ride quality because of the damp system that is on the struts, you can adjust the quality to stiff/sport or cruse/smooth.
I was thinking Rohana wheels for my 1st gen MDX. Would it make more sense to you to put 20's on since it looks like the 3rd gen has a larger wheel arch?
I find your modification on an Acura MDX to be a nice one.A Rohana rep. stated that they have not put together nor advise a 22x10.5 package all around, with lowering it the vehicle will have a difficult time turning. What size wheels are the front?
I bought 4 individual wheel at a time rather then buying set this way I was able to buy total of 4 size 22x10.5 wheels…. Here is link to the size I have on the MDX www.fitmentindustries.com/store/wheels?swf=332205
What settings do you have your coulovers adjusted too? More to the softer or harder?. Ive got a lowered explorer and it rides soooo nice on the softest setting but maybe bounces too much. Hard is harsh lol. Thanks
Lowering kit is from Vividracing.com Rohana wheels also from Vividracing site side splitters are from Sfactorfabrication site. and Bloxsport rear 20mm wheel spacers are from Bloxsport.com
Thank you, it rides pretty smooth since suspension damp control adjustments on the struts where you can adjust the comfort from sport to comfort so its good ride
Thats a clean MDX, can someone tell me the name of the part on the front bumper? The silver bar looks like a front spoiler or lip, i've searched for this but haven't been able to find it. Thanks!
here is link, www.acurapartsforless.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?origin=pla&gclid=CjwKCAjwybyJBhBwEiwAvz4G7-6u3RKsuf9884ZaqbP10ukuZbqa34XGE3-WYIxTy95GTeMMVGh0eBoCv5QQAvD_BwE
Here is link to website I bought it from….www.acurapartsforless.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?origin=pla&gclid=EAIaIQobChMIoJKb98mu9AIV0xTUAR3fhgdgEAQYDSABEgI7YvD_BwE
@@albertovargas4249 No modifications at all straight and simple factory style mount and I added 20mm rear spacers just to poke the wheel out for flush with panel look since the rear wheels were sunk in a little other than that all good
Sorry to bother man I’m looking at some vossen wheels for my 2016 mdx and vossen Is saying they don’t recommend 10.5 because they don’t know how it fits what they do recommend is 9 all around flat no deep
Dude that's the Baddest MDX I have ever seen. Nice job!
Thank you
without a doubt it is a professional job, I love that style and knowing that it is a premium car congratulations it looks great
Thank you
been looking for wheels for my 14 mdx for awhile, and this video helped me make my mind up, thanks!
This thing is SICK! Bro it's perfect I love it. I'm gonna do this to my 17 MDX thanks for the video
Thank you
Beautiful taste!! I’m glad you can represent for the MDX. I have the 2020 and aspire to mod it one day lol. Thanks for the content!!
You're welcome and thank you.
Love this truck, the stance, the color, the rims choice… all top notch … you did an excellent job with it
Your license plate trim say’s #boosted pls explain #show&tell I’m Thinkin about boosting or supercharging mines… any information or fingers pointing in the rght way?
@@jahcousteauu_STAYinSHAPE Not boosted at all, lol its an old frame plate I used from old Acura Integra I owned that was actually boosted
@@MegaLeonidovich oh yeah Ohk, I’m Thinkin about boosting mines or supercharging it #needforspeed I need more horsepower and torque. I’m trying to look for an Acura shop in my area rght now, suspension and performance upgrades on the way…
@@jahcousteauu_STAYinSHAPE an Acura shop? Do it yourself. Order a j series turbo kit and then take it somewhere to get tuned.
Very clean. Looks almost like a Hatchback PLUS
@@123fourfivesix-g4i thank you
This is one bad ass MDX !! 🔥🔥🔥
Thank you :)
Great video man. Your mdx looks flawless.
Thank you
Super clean not over done 🔥🔥🔥
Thank you
Super clean dude 🔥🔥🔥🔥🔥
Thank you
This car is a neck breaker! Tastefully done
Thank you
Wow wow very nice mdx!!! Awesome job!!!
Thank you, got tired of factory look and spiced it up a little
Bro this is badass!
Thank you
That's one good looking mdx😎😎
Clean asf💯❤️💙
I feel like chrome woulda popped with this particular vehicle more.
Possible yes but for now have this set on the car
Great job!
Freaking clean bro !!
Thank you
Beautiful Acura man
Thank you
Great looking MDX, I want to do the same wheel on my 19 MDX but it isn't available anywhere. I did find a 21 inch in a similar style and specs I might give a shot and can hopefully get a 265/40/21 for a little more tire🤞
Thank you
Nice...
I have a '15 with the tow package. I wanna get that front lower bumber trim piece u have. Dope. Can't do the back because of the tow package.
Bro . Awesome video.
Thank you
That’s dope bro. I got a 2014 as well.
Thank you, that is a great choice, good car also
Awesome job looks great
Thank you :)
Love it,i do prefer bags for suvs but so beautiful
Thank you, my Accord is on bags, I have video of my bagged Accord on youtube
Good looking MDX sir!!!
Thank you
where to buy the rear diffuser and front fascia???
Sick bro 😎 🔥🔥🔥🔥
Thank you
Well done !!! Rolling shots please !!
Thank you, working on making some roller videos asap
this thing is sick.
Bro it’s a badass mix. How many inches did u drop front n back and what was the name again of the coil over u used and you said those are 22 inch rims. U should also make a video on daytime to appreciate the suv more.
where’d you get the tail lights they look fire
@@devondareus9107 the tail lights are original factory.
Dope!!!! Can I ask how much you’re into it for the wheels and suspension modifications?
1) do you used spacers in the front and the back or only on the back?
2) how many inches you lowered the coilovers max or how much in each front and back.
3) when go to a gas station do you scrape going in tru the sidewalk ramp?? Here in ny gas station ramp are very high
Yes I used 10mm from spacer and 15mm rear spacer and lowered 2 inches front and rear
No scrapping at all unless extremely steep drive ways and parking entries otherwise it’s pretty good in clearance
Love it mines needs a lil pop !
Thank you friend, yes modify your car will look awesome and you will love it
Remarkable! Do you have an offset on these wheels? Did you just add 20mm spacers to the back wheels?
Thank you, I don't remember the offset, but the 20mm spacers clears all calipers and wheel wells really good, no tire rubbing at all.
Can you list what type of rim/size and body kit you have in this car? How much did you lower the car too? It’s super sleek and nice! I love it!!
what front splitter is on there?
This is link to info on the front bumper lip/trim....www.curryacuraparts.com/oem-parts/acura-bumper-trim-sport-front-8p46tz5200a?c=bD0xJm49U2VhcmNoIFJlc3VsdHM%3D
That’s Fuken clean yo what’s the spec on those wheels
Thank you, wheels are 22x10.5 front and rear, ET40 and tires are 265/35/22
No problem man that thing is clean that rims in fitmemt on point
Any rubbing?? Looks great!!!
Thank you, no, no rubbing at all.
So dope!!!
Thank you very much
It’s perfect😮😮😮😮😮😮
Thank you
omg 😬😬😬😬😛😛😛😛🤩🤩🤩🤩 just i want know if when you put the coilovers the car jump a lot or you fell the same confort????
No, the car does not jump at all very good comfortable ride, the coilover struts have damping adjustment system to control comfort of ride, there are many coilovers with this type of system
@@MegaLeonidovich nice! Which are yours that put on that MDX I wanna do the same thing!! I had 2015 MDX set on 22-10.5 vossen and 35 profile on tires!! Is yours rubbing?
@@carlitosadrian123 Not rubbing at all, I have 22x10.5 wheels all around with 275/35/22 tires now
🔥🔥🔥🔥🔥🔥🔥🔥 congratulations good job i want put my MDX liek this
Looks good 👍👍
Thank you
@@MegaLeonidovich Be honest you’ve been thinking about bagging it because I swear that shit would look so hard slammed when parked 🤤
Where did you get the front & rear lower valance?
@@mrjhonnmetal from my local Acura dealer
😍😍😍😍😍
Hey looks very nice. Can I ask what size tire you’re running, and did you use the super low BC coils or standard? How many inches is this lowered? Thanks in advance, looks perfect 👌🏼
Thank you, I have 22x10.5 wheels with 265/35/22 tires, 3 inches lower then factory, lowered on BC racing coilovers, not extreme low version
Mofo cleeeeeean!!!!
Thank you
Nice looking,is the ADS light off?
No, the ADS lights are not on.
Looks super nice!! Are you able to adjust the rear dampers while installed in the car? I’ve heard from other people that once they are installed you can not access the rear top to get to the knob.
I had shop install the suspension for me so I don't know if that is possible, I do know that you will have to take off whole rear interior side panel to get to coils and that is a lot of work.
Wow I am really digging it. Can I do the same thing to a zdx
Yes you can, all you need is wheels and suspension and your look of car will change big time
Having a hard decision on what size to go with on my 2010 what you think ?
I am not sure about the 2010 but 22s work good on the 2014 and newers models, maybe check with local wheel tire shop, and if you want to lower your car or not, I lowered my car with 22s and it works great
So do you only have spacers for your read 20mm or is that front and rear, tough mdx trading in my 2017 bmw G30 this week for a 2019 mdx
Yes 20mm spacers in rear only and no spacers in front at all.
Hey is that a front lip you have on in the silver if it is can you send me the link for it thank you,flawless bro
Thank you, yes this front lip is original factory Acura aero kit.....
www.acurapartsforless.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?origin=pla&gclid=CjwKCAjw1uiEBhBzEiwAO9B_Hf9mSMq7WQ8JVaaWLa0hOOBGV-6CuL6ULEe-rL5kY_PSiXLHhx-qYxoCJs0QAvD_BwE
Sick af. Did u have to roll the fenders?
Thank you, no I didn’t roll fenders at all, wheels clear just perfect plush car is now lowered all the way and have a small gap between wheels and fenders
Nice I love it
Thank you
Your welcome im getting a 2014 one as well can’t wait to do it up
@@TheErnestoq Good choice, can't wait to see what you do :)
Damn this mdx is sexy as hell !! I have the same one but white. It was fresh until I had 3 idiots hit me , 3 different times. In 3 months. Yes, 3 months. Back to back. They also hit me and took off. That’s how these animals are here in Philly. I’m going to do something similar to mine one I get all the body parts I need. Btw I heard you said you have coil overs , how does it ride on those ?
You have a camber kit on the rear? How are the wheels straight?
No camber kit at all, the wheels are all natural camber in rear from lowering car.
Sexiest MDX on the net! Do you ever have problems scraping since you lowered it?
Thank you, no scrapes at all
Can you tell me what the exact spring you use for the suspension? I can't find the coilovers from that page
bought the coilover lowering kit here, www.vividracing.com/-p-152645327.html?gclid=Cj0KCQiAvbiBBhD-ARIsAGM48bxh_XkK17acktqu7nAfRaDY0JmvONwGDDSZRE6p91SmOcQ3yfLypP8aAt5pEALw_wcB
Love it
Thank you
Where can the installation instructions be found? How do u insatll?
Whats up, nice mdx, do you get any vibrations at high speeds with that ride height?
Yo, thank you, no, no vibrations at all its actually pretty smooth ride quality because of the damp system that is on the struts, you can adjust the quality to stiff/sport or cruse/smooth.
Is that running board oem or aftermarket?
After Market by S Factor Fabrication.
damn
I was thinking Rohana wheels for my 1st gen MDX. Would it make more sense to you to put 20's on since it looks like the 3rd gen has a larger wheel arch?
20s look good on 1st gen MDX
I find your modification on an Acura MDX to be a nice one.A Rohana rep. stated that they have not put together nor advise a 22x10.5 package all around, with lowering it the vehicle will have a difficult time turning. What size wheels are the front?
I bought 4 individual wheel at a time rather then buying set this way I was able to buy total of 4 size 22x10.5 wheels…. Here is link to the size I have on the MDX
www.fitmentindustries.com/store/wheels?swf=332205
Here is the site I bought my 4 individual wheels
www.vividracing.com/rohana-rfx2-rotary-forged-wheel-22x105-p-151469419.html
Very nice where did you get the front lip?
Thank you, here is link........acura.oempartsonline.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?c=bD0xJm49U2VhcmNoIFJlc3VsdHM%3D
@@MegaLeonidovich thank you brother. Easy to install?
@@ericworrell3653 yes very easy I did it myself at home
Hey bro u still have the car , and if u do how long did the bc coil-overs last ,
Effin saick 😎🔥👊🏽💯‼️
What settings do you have your coulovers adjusted too? More to the softer or harder?. Ive got a lowered explorer and it rides soooo nice on the softest setting but maybe bounces too much. Hard is harsh lol. Thanks
its set to soft or comfort I believe, rides very smooth since the car is not slammed all the way
@@MegaLeonidovich Thank you brother. Ive just been playing around with it trying to tweak it
Hows your ride quality with people sitting in all the seats?
What patten bolt it’s?? Acura MDX 14-16
5x114.3
@@MegaLeonidovich thanks 🙏🏻🫡
This is a bad Ass,I just drop mine but it's chambered a lot .what do I need to change in the rear ?
Where do you go for aftermarket parts for your MDX? I can’t seem to find a legitimate website for Acura MDX parts. Thank you
Lowering kit is from Vividracing.com
Rohana wheels also from Vividracing site
side splitters are from Sfactorfabrication site. and Bloxsport rear 20mm wheel spacers are from Bloxsport.com
@@MegaLeonidovich thank you
Wht u use to lowered
BC Racing coilovers, adjustable suspension
Looks dope, how does it ride with the lowering coil overs and the wheeel?
Thank you, it rides pretty smooth since suspension damp control adjustments on the struts where you can adjust the comfort from sport to comfort so its good ride
@@MegaLeonidovich Thanks man. Was thinking about getting an MDX, i think your vid pushed me thru the finish line
@@CanalOtro No problem man great choice
Can't find anything for my awd mdx
How does it drive? Smooth, rough or about same as stock?
It’s smooth, but not as smooth as factory suspension
Yo I got a 2014 rdx does the 2012 coil overs works?
@@dominicgarcia6936 yo, not sure to be honest so can’t say yes, might have to check with dealer on specs MDX vs RDX they might know better
Wait I found them and I need some help so lost 😂
Did your 22s fit or did you need to do any tweaking? Such a nice car man love what u done ✅ 💙
Thats a clean MDX, can someone tell me the name of the part on the front bumper? The silver bar looks like a front spoiler or lip, i've searched for this but haven't been able to find it. Thanks!
here is link,
www.acurapartsforless.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?origin=pla&gclid=CjwKCAjwybyJBhBwEiwAvz4G7-6u3RKsuf9884ZaqbP10ukuZbqa34XGE3-WYIxTy95GTeMMVGh0eBoCv5QQAvD_BwE
acura part oem
@@MegaLeonidovich Is that the same price for front and back? Ty....
@@yellowcaps1 about same price for front and rear
@@MegaLeonidovich Oh ok i thought they came together, so it's more or less 500 together im guessing.
What do you have your dampening at?
set to 15 all around.
Did you have to use hub Centric for wheel Vibration And if so what size is it
No, the wheels are custom fit to factory hub size 64.1mm I believe
What size tires
How much did u spend over all
What size wheels are running and tires
22x10.5 ET42 all around, tires are 265/35/22
We're did you get the front and rear trim
Here is link to website I bought it from….www.acurapartsforless.com/oem-parts/acura-bumper-trim-sport-front-08p46tz5200a?origin=pla&gclid=EAIaIQobChMIoJKb98mu9AIV0xTUAR3fhgdgEAQYDSABEgI7YvD_BwE
Thanks just got me a 2016 with low miles
@@archerland Excellent choice my friend hope you enjoy the new car.
How many miles does it have and have you done the timing belt yet?
483k
@@MegaLeonidovich impressive! i want to do something with mine but there are not a lot of options for mdx
Why don’t more folks slam their rdx and mdx’s
Not sure : ) but I like it and it looks nice
How’s the ride?
It’s pretty good not too bumpy
Hows the ride quality comaparable to the stock? Also can you put heavy loads on it?
Quality is actually good and I’ve put lots of load in the trunk couple weeks ago when I hauled River rocks home for landscape
Should have just bought the TL
Camera ???
Canon 90D with Tokina 11-16mm f2.8 cf atx-I lens with PM PolarPro ND/PL 2-5f stops lens filter
What’s the offset on your wheels? And how wide?
22x10.5 +42 all around
@@MegaLeonidovich Thanks
I want to lower my MDX what all do I have to do?
You need adjustable coilovers, i have the BC Racing brand coilovers and they work good
@@MegaLeonidovich ok thanks bro
@@MalibuMike75 No problem :)
What’s the offset?
22x10.5 ET 42 on all 4 wheels
Nice, I have 20”x9.0 with 35 offset
I am too cheap to do this. I would rather spend my money on girls, dinners, clothes, vacations, and good times.
@@coastalbeer that’s a great choice too, I support 🙌🤙
Im just watching this. 🤌🦾🦾
Did you stager the wheels or are they all 22”/10.5
And what’s your offset
Front and rear at all 22x10.5 ET42 offset
Any modification so that there’s no rubbing or any spacers ?
@@albertovargas4249 No modifications at all straight and simple factory style mount and I added 20mm rear spacers just to poke the wheel out for flush with panel look since the rear wheels were sunk in a little other than that all good
Sorry to bother man
I’m looking at some vossen wheels for my 2016 mdx and vossen Is saying they don’t recommend 10.5 because they don’t know how it fits what they do recommend is 9 all around flat no deep
I want something like that with some concave
Vossen seas they don’t know if it will clear my calipers with a concave