Installing Innovative Traction Bar Kit On Project Prelude
HTML-код
- Опубликовано: 21 окт 2024
- On this episode of FTP Speed Shop we install a Innovative Mounts Traction Bar Kit on Project Prelude. This is a super clean looking piece and gives us the much needed space we need around the bottom of our aftermarket radiator. I am excited to see how this bad boy helps this old prelude handle and launch.
Thanks for your support make sure you LIKE, Comment, SUBSCRIBE, and use my links below it really helps me out!
Check out our website:
www.Ftpspeedshop.com
My Amazon/Ebay Links:
www.amazon.com...
Tools:
Makita 18 Volt ½” Impact Gun: amzn.to/3BpKkwn
Stanley FatMax Tape Measure: amzn.to/3DWHBeq
Dead Blow Hammer: amzn.to/3pX5w8r
Parts:
Innovative Mounts Traction Bar Kit: amzn.to/3IR6Na6
Video Equipment:
GoPro 7 White: amzn.to/31RjkFj
GoPro Hero 5 Black: amzn.to/2Sm7uzy
GoPro Hero 8 Black: amzn.to/39wVa7M
GoPro Media Mod Hero8 Black: amzn.to/39uu8xH
Sevenoaks MicRig: amzn.to/3kQcadg
Disclosure: We get a small commission when you purchase products via our Amazon links, this doesn’t cost you anything extra, it’s a cut that comes out on Amazon’s end. But please be aware the Amazon links provided are affiliate links.
This can work with out the front engine mount
I am not running a front motor mount. I also am running hassport motor mounts, so there isn't much movement.
Would this traction bar fit the 6th gen Accords? Pretty similar set up
I'm not sure get on there website and see what they have for your car
What type of blue is that called that's on your valve cover and intake?
It was a custom blend, my buddy mixed for me.
Awesome! Amazing color, and great job. Beautiful Lude as well man! Your videos are super inspiring for me due to my own restoration project of my 4th gen Lude. Thank you!
@user-et4tq7lv6w Thank you, and good luck with your Lude. If you ever have any questions, just ask.
How did you get your cam gears to show like that ?
I marked the center of the cam gears on the valve cover with the lower belt cover removed. Then removed the valve cover and wedged a chunk of 2 by 4 in the valve cover where the timing gear would go and used a 4.25 inch hole saw and cleaned it up with a die grinder.
@@realpowermotion6235 cut the valve cover out with a hole saw and blend it in with a die grindee
I was searching everywhere for a left side radius rod and I couldn’t find one anywhere except for a couple people on Facebook prelude pages that were multiple states away that all wanted $100 and up and I didn’t really know if they were legit and it sucks because so many people out there just wanna take advantage of people and I don’t have $100 to gamble with because I don’t hate anything more than a thief and losing money. And I definitely didn’t want to drop 350$+ on a reputable trac bar kit, but I just found an open box innovative Mount kit that has some scratches on it for $80… I don’t gaf about a little bit of scratched paint because I do all my own work and aside from a little paint it’s just gonna be hammered with road debris anyway… I wasn’t sure if it was coming with the heims because they didn’t have any in the pictures so I ordered some new ones from the manufacturer directly for another $53 so for $130 vs what I was gonna pay for one stock radius rod, it was no question what the choice was gonna be. But I do have a set of moog bushings that I won’t be using now 😂
Nice score! You have a 4th gen Prelude?
@@FullThrottlePerformanceMike fifth
Unfortunately the one that I had originally ordered for $79 was already sold, but I found out that it was only a cross member and one bar anyway, so I had ordered a hardware kit directly from innovative mounts and I ended up ordering a different one that was scratch and dent that was only missing one set of the hardware so it worked out perfectly for $300 plus the hardware and it showed up today so I’m gonna get it on tomorrow morning.
I was hoping to see if you used a stock front motor mount and if so, do you use the provided bracket for the stock mount or is that for the innovative mount solid mount?
@zacharymikell1847 I did not install a front mount. I debated on making a custom front mount but decided against it.