Dan you are amazing designer, it is a pleasure to even look at this tent. It is great you decided to keep both doors (I was worried they will be sacrificed). I hope you have some plans for next year of making a kill and introduce it in 1P version as well. If I count correctly you shaved off around 437g from 2P (hats off), so assuming you can save around 300g on 1P, it would weight 525g. Cannot wait... :-)
I don't know if 1/2 kg is an important weight factor. What IS important is one hand close up, 4 peg stakeout, 2 pole design, tight tub floor, and steep angles. Add to that width and length and small pack size and it's a winner. Great job. Wish I could afford one.
I have a duplex and have been waiting for this thinking I’d make the change, but there’s no way. A nylon floor at that price? No. And now I have to carry a ground cloth when I don’t with my duplex. The floor misses the mark and ruins the tent, especially for the cost.
@@andilowry5784 The 15D nylon floor is at least as durable as the 1.0oz floor in your Duplex. That 1.0oz DCF is very strong, but definitely more prone to abrasion and punctures than a 15D nylon, and those are the main stresses on a floor. The key advantage of the woven floor is a way smaller packed size. The Duplex is literally 50% more bulky (500 cu in vs 340) because of that floor which doesn't even improve durability. Also while DCF is super waterproof, it does form microholes from abrasions, so the the nylon is more waterproof overall. So you're basically getting a more durable, more waterproof, and more compact floor. As for the cost, yes nylon saves cost but other aspects of this add cost so it's not a cheaper to make tent than the Duplex. The Duplex is sewn construction which is way cheaper and less good than hot bonding, and it is a smaller tent so it has less DCF.
@@durstongear and anyone else coming into these comments. I don’t know Dan but followed his original 1p design on drop for a while. He would always comment back and answer any questions some one had. Anywhere he would answer questions even over on section hiker. When his pack first went on drop I asked if I should get something else vrs his pack. He gave excellent reasons and answers for why I should and would do well with the other pack vrs his. On any podcast I’ve heard him on like backpacker radio or on with Jeremiah and JK he was awesome to listen to. Knowing this dude went out and blazed some trail for Justin Outdoors on the GDT last year. He just seems like an awesome dude and his knowledge of his products and the reasons he has done what he has done with his gear is just simply amazing. I can not say enough good things about a dude I don’t even know but has an impeccable reputation! I love using my 1p version and would definitely purchase this 2p version once able. Dan knows his gear and has the answers to why he has done what he’s done so if 15d was acceptable to him vrs 1.0oz dyneema you can trust it!
I worked with Dan and his crew to fix an issue I don’t write this stuff BUT…..this was the MOST professional process and outcome I could’ve asked for Love my x-mid pro 2p v2 THANKS DAN>U da man!!! The Lost Sloth 💪🔥❤️🥾✌️
Please make a double-walled tent with a dyneema exterior and a 50 inch wide floor. You know, something between the x-mid 2 and the x-mid 2 pro. As far as I can tell, tarptent has the lightest double walled 2-person tent. But their pitch is really awkward and troublesome. You are so close to making the perfect tent for me!
@@dgriffo1369 That's a good point. But honestly, cost-of-materials is like the smallest factor in price. Design hours, marketing, paying human beings for their time is the true cost. But as it is Dyneema, sellers definitely try to capitalize on mark ups.
Well if it’s a double wall, he could just offer each part in multiple fabrics, maybe even with the ability to buy them in parts or modular. I mean hypothetically. I know it’s not realistic. But maybe some combination or modular options will be in the future. Like a mesh inner and dyneema outer. Or dyneema both. Or polyester or nylon outer wi5 dyneema floor, or vice versa. Or maybe even just to replace stuff that’s damaged without having to buy an entire package. Anyway looks like they are all selling well, so I’m sure we will see something new, whatever it is. Great work.
@@0verfiend The appeal of something like this is the light-weight aspect. If it's not full Dyneema, it loses its marketing punch. Also, I don't think Dursten is the kind of company to keep lots of skus. They're going to do a few things really well. Too many options are really hard on small companies. Personally, I wouldn't buy it unless it were full Dyneema. And if we're talking just materials cost, while Dyneema is expensive, it's not going to be the lion-share of the cost. The cost of doing business is much more than materials.
My goodness does this design just make me giddy. Congratulations on bringing legitimate innovation to the tent game and designing what looks to be a spectacular tent that checks all of the boxes without sacrificing anything! As a proud owner of the 1p and 2p, it's not likely in the cards for a purchase, but when the time comes for a single-walled DCF tent it 100% is at the top of the list, and it doesn't really even seem close.
Got my presale order in this morning!... after numerous crashes and spinning wheels of death, over an hour of patience paid off!... The real struggle is the patience before I get it out on trail. Won’t have it for my spring AT section, but praying it’s here for my fall section! Come on supply chain!
Its lines are as architecturally beautiful and graceful as those of the Golden Gate Bridge and the Gateway Arch. I would be tempted to buy it on the basis of its aesthetics alone but it is also apparently throughly contemplated. Great work, Dan.
I had high expectations but this really blows them away. I absolutely love the floor: DCF floors always struck me as bonkers and I never realized how big a difference just swapping out the floor would make a packed size. To say nothing of that sweet tensioning design (including the downsloped mesh to eliminate wicking). Just brilliant!!
As a current duplex user I’m running calculations to see how I can justify purchasing this even with no plans to thru-hike but it’s just that I want it for backpacking trips because it’s so well designed.
I’m currently considering the duplex and was ready to pull the trigger but now this has come along. I’m based in the UK so both expensive with the import duties
@@trickystravels Expensive for sure, but awesome. If you check out the 'compare' tab on our website you can see all the advantages the Pro has over the Duplex.
I've never once, seen a trekking pole tent that I like. Never one I would buy. Never one I even wanted to use. I want this tent. I wish it was available for my Appalachian Trail Thru Hike next month. Great tent and amazing design. Can't wait to try it.
Just ordered mine for delivery in Feb 2023. SO excited. Love design with the zipper, tensioned floor, 4 stake setup, and headroom - things the top competitor doesn't have. I can't wait to get out in the spring!
It’s a functional work of art from a design and engineering perspective, but it’s also just plain beautiful. And only 20 ounces? A perfect balance between extreme light weight and uncompromising performance. I’m so glad it’s coming from a company that has such a keen eye for quality. This tent is going to be so enjoyable to use (and carry).
Dan - not sure if you’ll see this reply, but I wanted to let you know I received my X-Mid Pro 2P today. Despite how high my hopes were, it far EXCEEDS my expectations. I can’t believe how simple it is to pitch. I can’t believe how much functional headroom there is the way the peak runs across the entire structure unlike other tents whose usable headroom is limited to the few inches at the peak of the pole. I’m 6’1” and have tons of headroom in this tent. That’s the biggest surprise for me. I can’t believe the attention to detail. Even the floor is taut and everything just lines up perfectly. 4 stakes is really all you need, and I staked out the two doors with some small stakes just to keep the vestibule taut when the doors are open. I can open and close the tent with one hand. This thing is unreal. And all for only 20 ounces. Thank you for designing and building this. It will make my trips even that much more enjoyable. I think it’s certainly the best tent design I’ve ever used.
That has got to be the best tent design ever, awesome job team.If only I could get one way down here in NZ.....she dreams...and packs the kgs ++ and huffs , puffs her way up the hills, one day the light weight gear will make it down here...Thanks for the vision on things to come
Beautiful to witness someone striving for perfection in his craft with focus as the main tool and functionality and simplicity as underlying principles. Bought the poly version this year, the day the X-Mid Pro 1 will be available I'll get that too. Keep up the great work Dan
Even in video this tent screams quality and design, actually it's the first DCF tent I seriously consider! I am truly impressed with your work as well as your feedback!
Ideas for improvements // Maybe Dan will see it :) 1) Higher bathtub walls and/or to continue into a thin solid side wall panel for around a feet of hight, so less wind will blow inside. 2) A small piece of fabric to cover a bit and protect the bottom end of the outer zippers, so it does not get damaged by abrasion from the ground. 3) A small loop from elastic or solid cord attached to each of both peaks and hanging to inside so a longer cord can be attached between them to hang small pieces of equipment under the roof, like a headlamp, shirt or socks to dry etc. A quick solution would be to stick on the inside side of the peaks patches with small loops like those Zpacks is selling.
Thanks for your feedback. 1)With the X-Mid Pro 2 the fly comes lower to the ground than most tents so it already blocks wind better. Most tents have a higher bathtub also a much bigger gap below the fly. By making the fly come lower it shelters the vestibules more and already does a good job blocking wind. 2) We have never seen abrasion on the bottom of the zipper in any of our tents. I don't think there is a problem to fix here. 3) Yes we could add a hang loop. We have these in our other tent models. The Pro is lighter so it doesn't have as many features, but we might add these - although most people don't want them so it is lighter to just add the stick on ones if people want them.
@@durstongear Do you guys use flame retardants on these tents? I really like this tent, but I don't want my young son exposed to the flame retardants found on most tents.
@@jasonspencer5267 No we have managed to avoid all flame retardants on our tents. We used them back around 2019 but we're able to meet the requirements without them starting around 2020 so none of our tents use them currently. So all our current tents are FR free. Thanks for your interest, Dan
@@durstongear Hi, yes I've been on the notification list a couple of weeks now. I saw you mention a wider Pro 2, will this be released at the same time as the X-Mid Pro 2? Thanks!
Thanks Jason. A few other companies have tried it (Gossamer Gear, Tarptent) with DCF tents, but a lot of people want a DCF floor even if it doesn't really make sense (shorter life and more bulky for similar weight). We'll see how it goes. I hope I can educate people on it but it is more work to explain it.
Clearly going after the Duplex. The vents, zippers, magnets instead of toggles, poles not in the way of the door, slightly more floor space, and comparable weight makes this tent so much better. The little things add up when you’re out on the trail.
I have a 2 year old X-Mid 1 and love it. The Pro would be sweet when I eventually do the US Triple Crown, though as a Canadian this will end up landing here around $1000. I'm starting a loonie savings jar today.
What a beautiful and worthy tent! So excited to get one. I have been waiting for this release to confirm that this is the best dcf (and Canadian yay!) tent on the market! Loving the zippered fly doors, dual vents, covered doorway, minimal weight + pack size and I’m especially loving the taught floor design!! Now I just have dig deep and find some patience until it arrives! Incredible design and product- thank you!
After a LONG time of searching and comparing I finally landed on the Mid-x 2p. I finally found a double wall with enough room and light enough, and now you have me here. Considering a single wall tent. Never did I ever think that would happen. LOL! Great build! would be nice to see a bit more of the interior where the mesh meets the exterior. though. To see how many and how much exterior walls are directly exposed without mesh.
The mesh connections are carefully designed to be a functional as possible. There are full door walls on the vestibule sides, and then short mesh sections that connect the top edge of the bathtub floor to the bottom edge of the fly. That acts as a gear shelf and means condensation won't drain to the floor area. The fly is also a 'full coverage' fly which means it extends pretty much right to the ground, so it does a really good job of blocking rain splatter/exposure/drafts.
Incredible tent. I wish I knew about this tend before I purchased one that I have. I like it but with this tents four peg pitch and other features. WOW!
My X-Mid 1p is on the way. Hard to believe, but this is a bigger and better tent than what I need! I never expected to say that. (Muttering off into the distance here) Courtesy of Half Vast Flying
X-mid 2p video released one year ago, Views: 28k X-mid 2p Pro video released 10 days ago, Views 29k Keep doing what your doing Dan, cant wait to get my hands on this tent!
Ha ha...yeah the X-Mid Pro video is crushing it. Still a long way to go catch the original 1P video though at 106k. Amazingly though, the new Pro video is about to pass the 1P video for likes. Right now it sits at 1054 vs 1055 likes - almost the exact same number despite only 30% as many views. It's pulling them in at 3x the rate!
Dan, I am excited to have been able to get in on the pre-sale of the X-Mid Pro 2. On all counts, it is the single wall Dyneema tent I have been waiting for. I currently own double wall 1P and 2P X-Mid tents and have been extremely pleased with the X-Mid design and quality in both. The fact that both tents have met and exceeded all of their design and performance goals during the last two seasons has made the decision to purchase the Pro 2 an easy one. I'll be looking forward to the Pro 2's arrival!
Hey Dan! I love what you do! I am currently doing my final research project in my Materials and Design class on your X-mid line of tents for my Outdoor Products Major! Thanks for everything that you do and I wish you the best!
I"m on the list to be notified. I'm hoping to score one in time for my July Colorado trail Thru Hike. This looks awesome! Lets see if it outdoes my Zpacks Duplex.
Thanks for the interest John! I think you'll be impressed compared to the Duplex. Have you seen the 'compare' tab on our site? That is a break down of how the X-Mid Pro 2 and Duplex stack up.
And here we are, only a day or so away from Tent making history. Will these go in 3 minutes? It’s a possibility, but here’s to a great tent maker and to the hopes of landing one 😁 Cheers to the Durston Family
Yes the layout works really well for that. No poles in the doorways or living space, and no need to measure them during setup like many trekking pole tents.
I'll be getting one of these for when bivies don't cut it, hopefully during your spring/summer release. I am still reeling from Christmas.I love the design Dan. I'm so excited to see it in a lightweight fabric!
killer! hopefully you get a proper flow going on production soon so we're not flailing around like idiots on release ;) a 3 min sell-out should wake up any backer/banker ATB Dan
I have an original X-MID 1 and it is the most innovative tent I've ever owned. My only two critiques were that it was restrictively narrow and constructed with heavier material. Both of those concerns are addressed here. The easy, DRY setup is invaluable. This looks like an utralight grail tent.
Thanks! Have you seen our second generation of the regular 1P? We also announced that a few weeks ago and it's now more spacious: durstongear.com/2022-x-mid-1p
@@durstongear that's great! I'm glad you listened to folks. I may just have to sell my original and upgrade, although it's still 100% a great solo tent.
I prefer the narrow fit. The sleeping pad doesn't move around and all my other gear stays in the spacious vestibule areas which keeps my sleeping gear clean
Dan, been watching your videos of the GDT for some time now, which is what got me interested in your designs. I love the intense focus on optimization for function, durability and weight which is why I just pre ordered the xmid 2p pro! Thanks for pushing the boundaries!
I’d love just the fly DCF and have the original xmid 2 inner so that you could run it floorless and be even lighter, and maybe even run a stove. But at 20oz, only so much more weight you can cut! Great design!
This is by far one of the most exciting tents coming to market this year! You have done an excellent job and I can't wait to get my hands on this tent (even if that's next year)! Keep Moving Forward
dang I wish this was available when I bought my dcf tent a couple years ago! this looks better than any other dcf 2p trekking pole tent out there. the packability is huge
I would love to buy this, but, as with the regular version, the sale begins at 3am for those of us in Australia. 😣The wife will definitely suspect an outdoor gear purchase is happening if I'm up at that time!
Hard to say how fast these will sell but we have a good supply so they might not sell out too fast. There’s a good chance they’re still available when morning arrives in Aus.
Every time I see some killer AF ultra light tent I am interested.....until I see the price. Then I am reminded why my Tarptent Protrail Li just cant be beat. Did AT thru hike in 21 and had no problems that would make me come off more than double to cost. Great looking tent. If money was no object I would consider.
I don't think this is double the cost of your Protrail Li. The Protrail Li today is $529, so the X-Mid Pro 2 is actually a good value at $639 considering it's a 2P tent (vs 1P) and quite a bit larger with a lot more DCF. DCF is really expensive and has only gone up in price since you got yours, so yours was probably less than the current price but still over $400 and not half the cost of the X-Mid Pro 2. The Protrail is a nice tent, but the Pro has a lot of advantages like a ton more space, headroom, and vestibule room. Dual doorways, dual large vents, no poles in the doorway, simpler pitch etc.
Doggonit, Dan. You sold me on this. haha And I can't believe I actually got in on the presale. Thank you so much! This is my first of your products and I hope I can make this thing last a lifetime. Last summer I bought a SMD Lunar Solo and haven't even had it out yet, just pitched in the backyard to test. I'll be selling that once the Pro 2 gets delivered.
Dan, I just bought your XMid 1p version 2, but have to say now I also want your XMid Pro! Amazing job on the design and obsessive attention to detail. It looks amazing! My wife will kill me if I get it now though. I need to figure out how to convince her...
@@durstongear quick question. Does the XMid Pro come with low stretch line or should I include the ironwire? Thinking of high winds and potential snow loads. Confidence in this arriving before my July TMB trip?
@@jeffozimek2178 It comes with regular cord. That plus DCF works quite well in high winds, but ironwire is even better in high winds and is noticably better under snowloads where the sheer weight of the snow stretches out regular cord. Odds are good for July but not a certainty. I'd put it at roughly 75% chance.
Obviously , you’re a product perhaps , architectural designer? …combined your skills/passions ? I’ve often wondered,as a designer if I could take my camping knowledge and combine it with my design knowledge .. you Amy just have Inspired me! it’s practicality and aesthetics ; the former being more important on this case( lives at risk) . Great product and fantastic lateral thinking/ problem solving . Kudos ! 👍
Must have watched about half a dozen videos where this tent is either in use or being reviewed. Even one's that listed things they didn't like had no real deal breakers for me. It ticks all my 'what I most want in a tent' boxes and the sad thing is that they sell so quickly :.) . Fingers crossed by this time next year, which is when the department of work and pensions say I can retire, then by then I will have taken out a mortgage and can buy one - eithert that or a packet of Ramen Noodles.... whichever cost less going by current rates of inflation.
Only 6’4”. There are so many of us who are in the 6’5-8” range who’d love a chance to try your product. Please think of us. It’s hard to find good, innovative products because of people’s limited conceptualization of the outdoor adventuring community.
Thanks for the comments. We recommend the X-Mid Pro 2 up to 6'4" when used with two people but with a solo occupant it does work for a much taller person. The parallelogram shaped floor gives one diagonal that is very long - moreso than almost any other tent - so we recommend it up to about 7'0" with a solo occupant.
Can’t wait to get my hands on this one! I currently have the Xmid 2P but will definitely be getting this (have to wake up at 4am nz time to buy!!). Love your quality tents Dan! Well done on going the next level!
We like it great Tent the first few days of using it, We are now walking Sweden from south to north 3000km
Dan you are amazing designer, it is a pleasure to even look at this tent. It is great you decided to keep both doors (I was worried they will be sacrificed). I hope you have some plans for next year of making a kill and introduce it in 1P version as well. If I count correctly you shaved off around 437g from 2P (hats off), so assuming you can save around 300g on 1P, it would weight 525g. Cannot wait... :-)
Absolutely! Waiting on the 1P!!!
I don't know if 1/2 kg is an important weight factor. What IS important is one hand close up, 4 peg stakeout, 2 pole design, tight tub floor, and steep angles. Add to that width and length and small pack size and it's a winner. Great job. Wish I could afford one.
1p Pro is announced and will be coming out next year
Gonna have all the Duplex folks salivating. Hopefully I'll be able to snag one.
I have a duplex and have been waiting for this thinking I’d make the change, but there’s no way. A nylon floor at that price? No. And now I have to carry a ground cloth when I don’t with my duplex. The floor misses the mark and ruins the tent, especially for the cost.
@@andilowry5784 The 15D nylon floor is at least as durable as the 1.0oz floor in your Duplex. That 1.0oz DCF is very strong, but definitely more prone to abrasion and punctures than a 15D nylon, and those are the main stresses on a floor.
The key advantage of the woven floor is a way smaller packed size. The Duplex is literally 50% more bulky (500 cu in vs 340) because of that floor which doesn't even improve durability. Also while DCF is super waterproof, it does form microholes from abrasions, so the the nylon is more waterproof overall.
So you're basically getting a more durable, more waterproof, and more compact floor.
As for the cost, yes nylon saves cost but other aspects of this add cost so it's not a cheaper to make tent than the Duplex. The Duplex is sewn construction which is way cheaper and less good than hot bonding, and it is a smaller tent so it has less DCF.
@@durstongear and anyone else coming into these comments. I don’t know Dan but followed his original 1p design on drop for a while. He would always comment back and answer any questions some one had. Anywhere he would answer questions even over on section hiker. When his pack first went on drop I asked if I should get something else vrs his pack. He gave excellent reasons and answers for why I should and would do well with the other pack vrs his. On any podcast I’ve heard him on like backpacker radio or on with Jeremiah and JK he was awesome to listen to. Knowing this dude went out and blazed some trail for Justin Outdoors on the GDT last year. He just seems like an awesome dude and his knowledge of his products and the reasons he has done what he has done with his gear is just simply amazing. I can not say enough good things about a dude I don’t even know but has an impeccable reputation! I love using my 1p version and would definitely purchase this 2p version once able. Dan knows his gear and has the answers to why he has done what he’s done so if 15d was acceptable to him vrs 1.0oz dyneema you can trust it!
@@markpanarese2452 Thanks for the kind words Mark! Your support is greatly appreciated.
I worked with Dan and his crew to fix an issue
I don’t write this stuff BUT…..this was the MOST professional process and outcome I could’ve asked for
Love my x-mid pro 2p v2
THANKS DAN>U da man!!!
The Lost Sloth 💪🔥❤️🥾✌️
Thanks for the kind words!
Dan
Please make a double-walled tent with a dyneema exterior and a 50 inch wide floor. You know, something between the x-mid 2 and the x-mid 2 pro. As far as I can tell, tarptent has the lightest double walled 2-person tent. But their pitch is really awkward and troublesome. You are so close to making the perfect tent for me!
It'll take us a bit, but I do plan to do this. Probably 2024.
I like the idea of this but with about twice as much dyneema what would you guys think the price would be? Roughly.
@@dgriffo1369 That's a good point. But honestly, cost-of-materials is like the smallest factor in price. Design hours, marketing, paying human beings for their time is the true cost. But as it is Dyneema, sellers definitely try to capitalize on mark ups.
Well if it’s a double wall, he could just offer each part in multiple fabrics, maybe even with the ability to buy them in parts or modular. I mean hypothetically. I know it’s not realistic. But maybe some combination or modular options will be in the future. Like a mesh inner and dyneema outer. Or dyneema both. Or polyester or nylon outer wi5 dyneema floor, or vice versa. Or maybe even just to replace stuff that’s damaged without having to buy an entire package. Anyway looks like they are all selling well, so I’m sure we will see something new, whatever it is.
Great work.
@@0verfiend The appeal of something like this is the light-weight aspect. If it's not full Dyneema, it loses its marketing punch. Also, I don't think Dursten is the kind of company to keep lots of skus. They're going to do a few things really well. Too many options are really hard on small companies. Personally, I wouldn't buy it unless it were full Dyneema. And if we're talking just materials cost, while Dyneema is expensive, it's not going to be the lion-share of the cost. The cost of doing business is much more than materials.
My goodness does this design just make me giddy. Congratulations on bringing legitimate innovation to the tent game and designing what looks to be a spectacular tent that checks all of the boxes without sacrificing anything! As a proud owner of the 1p and 2p, it's not likely in the cards for a purchase, but when the time comes for a single-walled DCF tent it 100% is at the top of the list, and it doesn't really even seem close.
Thanks Louis!
Got my presale order in this morning!... after numerous crashes and spinning wheels of death, over an hour of patience paid off!... The real struggle is the patience before I get it out on trail. Won’t have it for my spring AT section, but praying it’s here for my fall section! Come on supply chain!
Same bro same.
Congrats on quiting your day job Dan 🎉 Hope you live your best life and continue to bring the world great innovative gear ✌️
Thanks Ryan!
Its lines are as architecturally beautiful and graceful as those of the Golden Gate Bridge and the Gateway Arch. I would be tempted to buy it on the basis of its aesthetics alone but it is also apparently throughly contemplated. Great work, Dan.
Thanks!
I had high expectations but this really blows them away. I absolutely love the floor: DCF floors always struck me as bonkers and I never realized how big a difference just swapping out the floor would make a packed size. To say nothing of that sweet tensioning design (including the downsloped mesh to eliminate wicking). Just brilliant!!
This tent is wild. You are blowing your expensive competitors away with quality and design.
Thanks!
Thanks. Glad it looks good.
As a current duplex user I’m running calculations to see how I can justify purchasing this even with no plans to thru-hike but it’s just that I want it for backpacking trips because it’s so well designed.
Thanks! You're the kind of person we want to impress :D
All Duplex owners, myself included, are all thinking this very same thing.
I’m currently considering the duplex and was ready to pull the trigger but now this has come along. I’m based in the UK so both expensive with the import duties
@@trickystravels Expensive for sure, but awesome. If you check out the 'compare' tab on our website you can see all the advantages the Pro has over the Duplex.
@@durstongear just ordered! Managed to find a friends address in USA!
I got one in the preorder last week. I cannot wait for this
Nice! Thanks for your support. I think you'll like it!
I've never once, seen a trekking pole tent that I like. Never one I would buy. Never one I even wanted to use. I want this tent. I wish it was available for my Appalachian Trail Thru Hike next month. Great tent and amazing design. Can't wait to try it.
Thanks for the kind words and interest! Best wishes on your AT hike!
Just ordered mine for delivery in Feb 2023. SO excited. Love design with the zipper, tensioned floor, 4 stake setup, and headroom - things the top competitor doesn't have. I can't wait to get out in the spring!
Thanks for the kind words and support Eric!
I don't think i've seen a more impressive 2p tent for that price. So sick! Love my xmid 1, hope there will be a xmid pro 1 in the future.
This must be the best tent 2022!
Thanks Boris.
Very few shelters tempt me, this is one.
Thanks Enzo!
This tent is the one. You know when you know!
Thanks Naomi!
This is one gorgeous tent. I don't have the budget to get one on this run but I can't wait to get one for next season.
It’s a functional work of art from a design and engineering perspective, but it’s also just plain beautiful. And only 20 ounces? A perfect balance between extreme light weight and uncompromising performance. I’m so glad it’s coming from a company that has such a keen eye for quality. This tent is going to be so enjoyable to use (and carry).
Thanks for the kind words David!
Dan - not sure if you’ll see this reply, but I wanted to let you know I received my X-Mid Pro 2P today. Despite how high my hopes were, it far EXCEEDS my expectations. I can’t believe how simple it is to pitch. I can’t believe how much functional headroom there is the way the peak runs across the entire structure unlike other tents whose usable headroom is limited to the few inches at the peak of the pole. I’m 6’1” and have tons of headroom in this tent. That’s the biggest surprise for me. I can’t believe the attention to detail. Even the floor is taut and everything just lines up perfectly. 4 stakes is really all you need, and I staked out the two doors with some small stakes just to keep the vestibule taut when the doors are open. I can open and close the tent with one hand. This thing is unreal. And all for only 20 ounces. Thank you for designing and building this. It will make my trips even that much more enjoyable. I think it’s certainly the best tent design I’ve ever used.
It's finally here!
That has got to be the best tent design ever, awesome job team.If only I could get one way down here in NZ.....she dreams...and packs the kgs ++ and huffs , puffs her way up the hills, one day the light weight gear will make it down here...Thanks for the vision on things to come
Thanks Lyn. We do ship to NZ and for a low cost of $25. The tents are sold out for our batch next week but we have our next batch open.
Beautiful to witness someone striving for perfection in his craft with focus as the main tool and functionality and simplicity as underlying principles. Bought the poly version this year, the day the X-Mid Pro 1 will be available I'll get that too. Keep up the great work Dan
Thanks Michele!
I've watched this video far too many times now... July is so long away! 😆
Yeah it's excruciating :) I want it to be summer and X-Mid Pro season now.
@@durstongear oh its worse over here in Australia, its currently summer and already X-Mid Pro season!
Even in video this tent screams quality and design, actually it's the first DCF tent I seriously consider! I am truly impressed with your work as well as your feedback!
Thanks Paul!
Ideas for improvements // Maybe Dan will see it :)
1) Higher bathtub walls and/or to continue into a thin solid side wall panel for around a feet of hight, so less wind will blow inside.
2) A small piece of fabric to cover a bit and protect the bottom end of the outer zippers, so it does not get damaged by abrasion from the ground.
3) A small loop from elastic or solid cord attached to each of both peaks and hanging to inside so a longer cord can be attached between them to hang small pieces of equipment under the roof, like a headlamp, shirt or socks to dry etc. A quick solution would be to stick on the inside side of the peaks patches with small loops like those Zpacks is selling.
Thanks for your feedback.
1)With the X-Mid Pro 2 the fly comes lower to the ground than most tents so it already blocks wind better. Most tents have a higher bathtub also a much bigger gap below the fly. By making the fly come lower it shelters the vestibules more and already does a good job blocking wind.
2) We have never seen abrasion on the bottom of the zipper in any of our tents. I don't think there is a problem to fix here.
3) Yes we could add a hang loop. We have these in our other tent models. The Pro is lighter so it doesn't have as many features, but we might add these - although most people don't want them so it is lighter to just add the stick on ones if people want them.
@@durstongear Do you guys use flame retardants on these tents? I really like this tent, but I don't want my young son exposed to the flame retardants found on most tents.
@@jasonspencer5267 No we have managed to avoid all flame retardants on our tents. We used them back around 2019 but we're able to meet the requirements without them starting around 2020 so none of our tents use them currently. So all our current tents are FR free.
Thanks for your interest,
Dan
Looking forward to the launch of the 2024 model!!!
Thanks Jason! The 2024 model is going to be better than ever. We'll have them in stock in 3-4 weeks. Are you on the notification list?
@@durstongear Hi, yes I've been on the notification list a couple of weeks now. I saw you mention a wider Pro 2, will this be released at the same time as the X-Mid Pro 2? Thanks!
@@jasonnolan4143 Yes the 2+ version will be released at the same time.
@@durstongear Great, thanks!!!
We are beyond excited that we managed to pre order one of these!!
Thanks for your support! You'll love it.
Way to ignite the gear fever, Dan.
Thanks Jimbob! Glad you like it.
Finally someone noticed dcf is not the best options for making ground floor. So tempted to get one🤤
Thanks Jason. A few other companies have tried it (Gossamer Gear, Tarptent) with DCF tents, but a lot of people want a DCF floor even if it doesn't really make sense (shorter life and more bulky for similar weight). We'll see how it goes. I hope I can educate people on it but it is more work to explain it.
Can't wait until tomorrow Fingers crossed...
I just did an overnighter in my duplex. I can't wait to set them up side by side.
I think you'll be impressed :)
@DanDurston Already love the offset entrances and I'm hoping to never have condensation toes again.
Look at that, the DD40 making a cameo!
Dan, you are the Tent Messiah 🙏
I've never even considered a single wall tent but if I were to buy one, it would be this one.
Clearly going after the Duplex. The vents, zippers, magnets instead of toggles, poles not in the way of the door, slightly more floor space, and comparable weight makes this tent so much better. The little things add up when you’re out on the trail.
Yup. Definitely the same niche but the goal here is to be better is basically every way (space, stormworthyness, ease of use, build quality etc).
I got one! I feel like I’ve been waiting for this for years… I’m so excited! Can’t wait until it gets here. Thank you!
Awesome
LOVE my X-mid...considering the upgrade.
Glad to hear it! The regular X-Mid's are awesome. We'll have more of the Pro to sell this summer.
I have a 2 year old X-Mid 1 and love it. The Pro would be sweet when I eventually do the US Triple Crown, though as a Canadian this will end up landing here around $1000. I'm starting a loonie savings jar today.
What a beautiful and worthy tent! So excited to get one. I have been waiting for this release to confirm that this is the best dcf (and Canadian yay!) tent on the market! Loving the zippered fly doors, dual vents, covered doorway, minimal weight + pack size and I’m especially loving the taught floor design!! Now I just have dig deep and find some patience until it arrives! Incredible design and product- thank you!
Thanks!
Hi Happy, I hope you’re well. I just ordered this tent and I was wondering how you’re getting along with it? Thanks and Slàinte Mhath. 🥃
@@dougieranger absolutely love it! The Livability of this tent is incredible, you’re gonna love it!
@@happy_outdoors3483 Aww man, thanks, that is great to hear. Now I can’t wait until the end of April when it arrives. Cheers.
As a owner of a duplex I can say first hand the quality of craftsmanship is sub par, it’s as if it was sown by myself. This looks far superior.
After a LONG time of searching and comparing I finally landed on the Mid-x 2p. I finally found a double wall with enough room and light enough, and now you have me here. Considering a single wall tent. Never did I ever think that would happen. LOL! Great build! would be nice to see a bit more of the interior where the mesh meets the exterior. though. To see how many and how much exterior walls are directly exposed without mesh.
The mesh connections are carefully designed to be a functional as possible. There are full door walls on the vestibule sides, and then short mesh sections that connect the top edge of the bathtub floor to the bottom edge of the fly. That acts as a gear shelf and means condensation won't drain to the floor area. The fly is also a 'full coverage' fly which means it extends pretty much right to the ground, so it does a really good job of blocking rain splatter/exposure/drafts.
This is the most innovative and functional trekking pole tent I ever seen. The design and attention to details is 10/10. 👍👍👍👍👍
Thanks!
I have a 2021 Mid-X 1P. I just ordered the new 2022 Mid-X 1P. I look forward to ordering a 2023 Mid-X 1P DCF 😎
Thanks for the support Joseph!
Bought the normal X mid 2 about 18 months ago, lovely tent.
Incredible tent. I wish I knew about this tend before I purchased one that I have. I like it but with this tents four peg pitch and other features. WOW!
Thanks!
I never thought I would be disappointed in my duplex
Bring on the 1!!!
We'll work on it.
My X-Mid 1p is on the way. Hard to believe, but this is a bigger and better tent than what I need! I never expected to say that. (Muttering off into the distance here)
Courtesy of Half Vast Flying
Thanks Jack
X-mid 2p video released one year ago, Views: 28k
X-mid 2p Pro video released 10 days ago, Views 29k
Keep doing what your doing Dan, cant wait to get my hands on this tent!
Ha ha...yeah the X-Mid Pro video is crushing it. Still a long way to go catch the original 1P video though at 106k.
Amazingly though, the new Pro video is about to pass the 1P video for likes. Right now it sits at 1054 vs 1055 likes - almost the exact same number despite only 30% as many views. It's pulling them in at 3x the rate!
Inspired by your commitment to greatness! Beautiful and elegant design, I will have one someday! Thanks
Thanks for the kind words!
Dan, I am excited to have been able to get in on the pre-sale of the X-Mid Pro 2. On all counts, it is the single wall Dyneema tent I have been waiting for. I currently own double wall 1P and 2P X-Mid tents and have been extremely pleased with the X-Mid design and quality in both. The fact that both tents have met and exceeded all of their design and performance goals during the last two seasons has made the decision to purchase the Pro 2 an easy one. I'll be looking forward to the Pro 2's arrival!
Thanks Dana! Glad to hear the X-Mid's are working well.
Congratulations on bringing this to market, Dan. Still loving my 1P. Great to see the design expanded upon. I hope this is very successful for you.
Man that's a cool looking tent. A 1p would be great.
Thanks! We are working on a 1P version but it'll be about a year. You can sign up for an email notification here:
durstongear.com/product/x-mid-pro-1
I will be buying the 1P when it comes out. I was close to getting a zpacks
Nice. You'll like it! We're working hard on the X-Mid Pro 1 and have an email sign up on our website:
durstongear.com/product/x-mid-pro-1
I just placed my pre-order. I can't wait to try out this masterpiece!
Awesome. Hope you like it.
Hey Dan! I love what you do! I am currently doing my final research project in my Materials and Design class on your X-mid line of tents for my Outdoor Products Major! Thanks for everything that you do and I wish you the best!
Thanks Ben!
Wow - what a tent.
Thanks John!
I'm ready for the 1p already
We'll work on it. Going to be a bit (early 2023) but it's in the plan.
@@durstongear shut up and take my money
@@atlastennyson8401 We'll try :D
Congrats, Dan. You have created the best 2 man tent on the market. Now get to work on the 1P Pro :)
Thanks!
I"m on the list to be notified. I'm hoping to score one in time for my July Colorado trail Thru Hike. This looks awesome! Lets see if it outdoes my Zpacks Duplex.
Thanks for the interest John! I think you'll be impressed compared to the Duplex. Have you seen the 'compare' tab on our site? That is a break down of how the X-Mid Pro 2 and Duplex stack up.
And here we are, only a day or so away from Tent making history. Will these go in 3 minutes? It’s a possibility, but here’s to a great tent maker and to the hopes of landing one 😁 Cheers to the Durston Family
Thanks! Monday will be an interesting day :D
@@durstongear yes it will! I will be at work but not working for a few minutes 😁
Really wish this was available in the UK. I would love one so much
We do ship worldwide and we have worked to make that as affordable as possible. Of course there is still tax, but our shipping cost is only $25.
@@durstongear amazing! I will be looking into this tent then as it looks ideal for me, thanks Dan
Ordered!!!
I am blown away! Revolutionary!
Thanks John!
I intend to own one on Monday!
Really looking forward to the Pro 1p
I like the poles, they are off set away from entryway. Makes getting in & out easy. Overall looks roomy.
Yes the layout works really well for that. No poles in the doorways or living space, and no need to measure them during setup like many trekking pole tents.
Good job well done.
Courtesy of Half Vast Flying
Thanks Jack!
I should have gotten this tent
I'll be getting one of these for when bivies don't cut it, hopefully during your spring/summer release. I am still reeling from Christmas.I love the design Dan. I'm so excited to see it in a lightweight fabric!
Thanks Paul! Love your excitement and support.
killer! hopefully you get a proper flow going on production soon so we're not flailing around like idiots on release ;) a 3 min sell-out should wake up any backer/banker ATB Dan
I have an original X-MID 1 and it is the most innovative tent I've ever owned. My only two critiques were that it was restrictively narrow and constructed with heavier material. Both of those concerns are addressed here. The easy, DRY setup is invaluable. This looks like an utralight grail tent.
Thanks! Have you seen our second generation of the regular 1P? We also announced that a few weeks ago and it's now more spacious:
durstongear.com/2022-x-mid-1p
@@durstongear that's great! I'm glad you listened to folks. I may just have to sell my original and upgrade, although it's still 100% a great solo tent.
I prefer the narrow fit. The sleeping pad doesn't move around and all my other gear stays in the spacious vestibule areas which keeps my sleeping gear clean
Dan, been watching your videos of the GDT for some time now, which is what got me interested in your designs. I love the intense focus on optimization for function, durability and weight which is why I just pre ordered the xmid 2p pro! Thanks for pushing the boundaries!
Thanks Russell! I hope you like it.
Hey Thanks Love it big guy
Thanks Bill.
We are pumped for this one!
I’d love just the fly DCF and have the original xmid 2 inner so that you could run it floorless and be even lighter, and maybe even run a stove. But at 20oz, only so much more weight you can cut! Great design!
Thanks Connor
This is by far one of the most exciting tents coming to market this year! You have done an excellent job and I can't wait to get my hands on this tent (even if that's next year)!
Keep Moving Forward
Thanks Jesse!
I mean, this is clearly the pinnacle of UL tent design, right?!
Thanks Andy!
dang I wish this was available when I bought my dcf tent a couple years ago! this looks better than any other dcf 2p trekking pole tent out there. the packability is huge
Thanks Nathan
すばらしいテントです！
日本のメーカーも作ってほしい。
ありがとう！ 日本を含むすべての国に発送します。
I'm going to hang on to my Xmid 2P for now, but this is an awesome looking shelter! Very tempting.
I think my search for tent finally is over
Thanks for the kind words Patrik :)
- Dan
I would love to buy this, but, as with the regular version, the sale begins at 3am for those of us in Australia. 😣The wife will definitely suspect an outdoor gear purchase is happening if I'm up at that time!
Hard to say how fast these will sell but we have a good supply so they might not sell out too fast. There’s a good chance they’re still available when morning arrives in Aus.
Every time I see some killer AF ultra light tent I am interested.....until I see the price. Then I am reminded why my Tarptent Protrail Li just cant be beat. Did AT thru hike in 21 and had no problems that would make me come off more than double to cost. Great looking tent. If money was no object I would consider.
I don't think this is double the cost of your Protrail Li. The Protrail Li today is $529, so the X-Mid Pro 2 is actually a good value at $639 considering it's a 2P tent (vs 1P) and quite a bit larger with a lot more DCF. DCF is really expensive and has only gone up in price since you got yours, so yours was probably less than the current price but still over $400 and not half the cost of the X-Mid Pro 2.
The Protrail is a nice tent, but the Pro has a lot of advantages like a ton more space, headroom, and vestibule room. Dual doorways, dual large vents, no poles in the doorway, simpler pitch etc.
That moment the Xmid pro arrives and the tiny shipping box weighs more than the tent.😳
Looks like you covered all the bases. I'm thoroughly impressed!
That is beautiful, and functional.
Thanks Jan!
Doggonit, Dan. You sold me on this. haha And I can't believe I actually got in on the presale. Thank you so much! This is my first of your products and I hope I can make this thing last a lifetime. Last summer I bought a SMD Lunar Solo and haven't even had it out yet, just pitched in the backyard to test. I'll be selling that once the Pro 2 gets delivered.
Thanks Dan! I think you'll like it :)
Excellent design! You have thought of everything. Should be a big seller. Congrats!
Thanks!
Dan, I just bought your XMid 1p version 2, but have to say now I also want your XMid Pro! Amazing job on the design and obsessive attention to detail. It looks amazing!
My wife will kill me if I get it now though. I need to figure out how to convince her...
Thanks Jeff!
I've almost convinced her! Got the tent in my cart right now.
@@jeffozimek2178 Nice work Jeff :D
@@durstongear quick question. Does the XMid Pro come with low stretch line or should I include the ironwire? Thinking of high winds and potential snow loads.
Confidence in this arriving before my July TMB trip?
@@jeffozimek2178 It comes with regular cord. That plus DCF works quite well in high winds, but ironwire is even better in high winds and is noticably better under snowloads where the sheer weight of the snow stretches out regular cord.
Odds are good for July but not a certainty. I'd put it at roughly 75% chance.
Obviously , you’re a product perhaps , architectural designer? …combined your skills/passions ? I’ve often wondered,as a designer if I could take my camping knowledge and combine it with my design knowledge .. you Amy just have Inspired me! it’s practicality and aesthetics ; the former being more important on this case( lives at risk) . Great product and fantastic lateral thinking/ problem solving . Kudos ! 👍
Thanks!
Must have watched about half a dozen videos where this tent is either in use or being reviewed. Even one's that listed things they didn't like had no real deal breakers for me. It ticks all my 'what I most want in a tent' boxes and the sad thing is that they sell so quickly :.) . Fingers crossed by this time next year, which is when the department of work and pensions say I can retire, then by then I will have taken out a mortgage and can buy one - eithert that or a packet of Ramen Noodles.... whichever cost less going by current rates of inflation.
Thanks for the kind words!
Only 6’4”. There are so many of us who are in the 6’5-8” range who’d love a chance to try your product. Please think of us. It’s hard to find good, innovative products because of people’s limited conceptualization of the outdoor adventuring community.
Thanks for the comments. We recommend the X-Mid Pro 2 up to 6'4" when used with two people but with a solo occupant it does work for a much taller person. The parallelogram shaped floor gives one diagonal that is very long - moreso than almost any other tent - so we recommend it up to about 7'0" with a solo occupant.
Good luck getting one everybody
Love that floor! Looks great and has no many features beyond what you could ask for in a good tent.
Looks amazing!! Are you working on 1 person tent as well?
Yes that will be released in a few months. You can sign up for a notification here:
durstongear.com/product/x-mid-pro-1
@@durstongear Awesome! I signed up for the notification!
Beautifully executed Dan! One day I will upgrade from the base model.
Thanks Kevin!
Can’t wait to get my hands on this one! I currently have the Xmid 2P but will definitely be getting this (have to wake up at 4am nz time to buy!!). Love your quality tents Dan! Well done on going the next level!
Thanks for the kind words and support Curtis!
Congratulations Dan, its a thing of beauty!
Thanks Darren!