Broken Trace Repair
HTML-код
- Опубликовано: 19 окт 2024
- Broken Trace Repair #electronics #mobilerepair
#soldering
#shortsfeed
#technology
Tags :-
broken trace repair
how to repair broken trace
broken trace
broken trace repairing
broken supply repair
broken tracks repair
broken tips repair
electronics
elctronic components
soldering
desoldering
solder
desolder
solder mask
flux paste
solder paste
mobile repair
mobile repairing
mobile repairing course
mobile repairing complete course full video
electronic circuits
phone repair
micro soldering
micro jumpers
best soldering tricks
mobile repairing tips
This is just incredible to me, it's really an honor to watch this.
thankyou
Dimana beli lem yg warna hijau
Lmao
I am literally sitting here thinking the same. That was fucking beautiful.
It's always so much more incredible when they show a zoomed out image of just how ridiculous small some of these are.
This is no longer a simple repair, it is an artistic restoration.
Your a professional at this my guy !!
Thankyou so much,👍❤️
That is very delicate work to do by hand. It takes the most feather touches to avoid doing more damage while removing paint from thin copper foil. I couldn’t do it and I consider myself an expert with a soldering iron. Of course in this case the board connector is already damaged. Beautifully done.
not that hard.
@@adrok8644+1
@@adrok8644 Okay, do it, and make a video as proof
What a beautiful job very delicate and cleanly done
thankyou
I've seem other YTs repair but this repair is next level, very close to OEM specs.
👍❤️
This is art.
Thankyou
I am not professional but sometimes do for this kind of Work in home & thanks for New trick & tips make many video we r support ❤ Ur video
Thankyou so much for support 👍❤️❤️
Thank you for sharing. To what temperature should you set the blower especially when heating involves components that has plastic as yours.❤
300c , use low temperature solder paste and flux paste
Simple, clean and perfect, it's wow, I love that everything was tailored and you showed how it's done well and correctly.
Thankyou
- Сколько флюса вы используете?
- Да😂
You have to
Его там мало
Все здесь оптимально
When u set extra 2 line there are which solder paste u used?
2 uul nano solder paste 183c
@@idealinstitutealigarh thank u so much.
انت مبدع
@@idealinstitutealigarh❤
Question, what is involved in finding out the cause of something like this? Are there tools you use to narrow down the possible location on the board. or are you just looking at the board for any faulty pieces?
This is fascinating....sound choice also 👌
👍❤️
Could someone please explain to me each step and material that was used for fixing this? It looked like magic to me, so amazing!
What is the green UV stuff that you used to attach the pads? I have been just jumping to the trace were possible. Id love to know what that stuff was called. Cheers!
Mechanic solder mask green uvh900
@@idealinstitutealigarhOh, thanks!
I saw the upper pad you repaired bent upwards. It still works for this. Is there way to make sure that doesn't happen for something you wanna make more structural?
Complete guide please for practice and tooles + camical
👍❤️
thats a really great idea covering it in conformal coating then scraping it off the new pads to hold it in place like factory. most simply leave the new pads floating. ill try this method moving forward.
👍❤️
Pls what is the name of the liquid you used for soldering? I use many different types and the solder does not stick to the motherboard and it leaves dirt . Maybe i use a wrong solder too??
Use mechanic brand tools , mechanic solder paste 183c ic use , 138c for micro Soldering
your work is so clean do you use a grinding pen to remove the mask and also what microscope?
Surgical blade, mechanic mc75t microscope
Very nice!
Your glue withstand temperature of hot solder. What glue do you using?
Me parece que se llama máscara de pcb y hay de varios colores no solo verde y se seca con una linterna de luz ultravioleta espero que te sirva
Máscara UV, no es adhesivo, es una pintura aislante que fragua con luz UV
@@diegogamezhigueras can u send me link for this glue
Para el secado necesita la linterna de luz ultravioleta, espero te sirva
The secret is that he uses a low temp solder paste after the repair. That "glue" is just a UVB-activated resin used on PCBs, it will not withstand normal temperature soldering alloys.
Awesome soldering skills 👏 👏 👏 👏
Thankyou
Your work is amazing and amazing. You are truly a skilled professional I am a beginner in maintenance I have a question that I would like an answer to What materials do you use? At work, I hope for a response from you
In this video, mechanic mc75t microscope, mechanic solder paste ism5, mechanic magic tag, kt850a+ smd , mechanic flux paste sd360 , watch other videos and ask again
Просто красота! Этот человек очень терпеливый и усидчивый с талантом хирурга!🐥🙏
Thankyou so much for comments 👍❤️🙏
😂
Скорее этот хрен не умеет паяльником пользоваться так площадки оторвать может только дебил который перегрел текстолит при демонтаже.
Это самый минимальный скилл человека которому можно доверить ремонт железа и то, для видео можно было бы и правильнее сделать. Дорожки восстановленные остались висеть в воздухе. Не пойму чему вы удивляетесь
@@mrsskyhigh1218 снимите свое видео на данную тему, покажите как надо.
Awesome, A work with pure love
Thankyou
Eu acho fantástico o trabalho de restauração
Thankyou
Safai ✨✨✨boht behtreeen❤😊
Thankyou
service centre: bord cant be repaired. replace?
roadside shop: yeah! just 100rs sir
👍
Glued down with solder mask? Is that good enough?
What is the copper look a like thing?
mechanic magic tags , for cleaning extra solder - mechanic solder wick r300
It actually is copper, called desoldering wire or solder wick
@@idealinstitutealigarhbro my motherboard is broken as 3 peaces and drop under water before 7 months its possible to repair…..its possible to take datas??
Espetaculo , limpo , avançado e parece uma maquina.
Thankyou
Outstanding
Thankyou
Ive done a little bit of trace repair myself due to desoldering with high heat and burning soldering pads off, but this is some next level thinking, i might try this next time
👍
Gostei muito do trabalho ! Parabéns meu chapa👍😎Nem a Nasa faz🤙😃 KKK 1 big hug here of Brasil. Very crazy
😅👍
perfect. very good tip
Thankyou
Yeh grey color ka and transparent paste konsa h name bta do please
Mechanic flux paste sd360 transperant, 2uul nano solder paste 183c gray , mechanic solder mask uvh900
What is the name of green glue or isolator which is frozen with violet clr lamp
@@idealinstitutealigarhI think it's uv resin
Wow amazing, this requires so much patience and precision it's crazy ❤❤🔥🔥🔥
Thankyou
Blade konsa use krty ap?
Surgical blade 22 number
11 number he
Great skill and steady hands, thanks for the clip
Thankyou
There's a couple of things he did that a lot of people don't approve of, but it's also falling in the camp of if it works for you. Good for you.
Work of art! The music was an excellent touch and the skill it took to do this 10/10 😮
👍
Excellent job
Thankyou
Isse mobile ke performance pe asar padta hai ya nahi
No
Well done Gulfam sir
Thankyou
El nivel de precisión es increíble. Fantástico!
Thankyou
Wow, that's detail & clean work
Thankyou
Absolutely beautiful. And skillfully done. 😊
Thankyou
😊 excellent I like this work
Thanks
SPLENDID WORK!
👍❤️
Wow perfect good job👌👌👌
Thanks a lot 😊
spectacle! what a beautiful work!
Thankyou
Just beautiful and very satisfying ⚡
Thanks
Awesome work ❤
Thankyou
Parabéns por divulgar. Muito obrigado mesmo. Parabéns e Deus o abençoe
Thankyou so much ❤️👍
Very professional
Thankyou
Can you scrape silicon like this?
Wow that was epic! Thanks for sharing.
Thankyou
Precision and perfection 🙌
Thankyou
That's just soo professional 😮
Thankyou
Beautiful work brother
Thankyou
Awesome!! I'm new in this topic and I'm afraid I have to ask.. what do they use for putting the cupper track on the board??
Mechanic magic tag
this level precision and patience change the world
❤️👍
Beautiful and satisfying 👏🏻
Thankyou
Have been looking for this.. Tried to solder a SMD component without hot air gun and destroyed some traces.. but, for sure, I'm completely unnable to do a repair like this :P
Practice practice ❤️👍
This is so magical wow this is the best job i have ever seen
👍
very nice repair!
thankyou
What brand of soldering paste do you use?
Mechanic solder paste 138c and 183c
Awesome 👍 great job
Thankyou
Hats off to you for keeping it real🖖🏻
❤️👍
Молодец 👍
Thankyou
Perfection! I loved it
👍❤️
Beautiful repair
Thankyou
Nice work ❤
Thankyou
That was awesome I’ve seen a lot of repairs that was slick
❤️👍
I love this channel👍🏼
Thankyou
I didn't even know this was possible. Amazing!
Thankyou
What is the microscope brand you are using ? Looks great
Mechanic mc75t
omg that repair is clean AF
👍
Wonderful repatch job
Thankyou
Ser profissional e outro patamar diferenciado
👍
Very intelligent Banda hai ❤❤❤❤❤
Thankyou
Clean job 👍
Thanks 👍
what type of copper did you cut to replace the two broken legs and what is the name of the blue stuff been applied on the surface area
Mechanic magic tag, mechanic solder mask green uvh900
Great work!
Thankyou
Great work ❤
Thankyou
Impressive fix.
Thankyou
Era de um vídeo como esse que eu precisava. 😅
Thanks so much!
Thankyou
رائع ومجهود كبير شكراً لك
Thankyou
Pls kindly list all the type of paste u Used here sir
Thanks
Plz check other comments
Would it be possible to replace the pads in the NES/SNES game?
nice work 👍👍
Thankyou
What did you use to repair the traces? copper tape?
Mechanic magic tags , it's a copper type sheet
@@idealinstitutealigarh Thanks for posting and replying. Could you provide a link to the Mechanic Magic Tags?
Very good! 👍
Thankyou
Hi, I'm from Brazil.
I'd like to know what material you used in it.
I recognize the UV paint, but the conductor you used, that is very similar to the original... i cant imagine what it is...
Mechanic magic tags
Now that is a clean trace repair
Thankyou
As someone that follows geopolitical and scientific advancements. As AI and quantum computing push more of us out of our jobs and the global economy looks uncertain, this is literally the future of human labor in 40 years. Repairs that can restore our tools back to normal without the globalized economy.
The work that has the artistic fine detail will be the last human labor hold out before we become obsolete.
Thank you for sharing your skill.
Thankyou so much ❤️👍
Nice, do you happen to offer services?
Only mobile Repairing course
நன்றி அண்ணா
Thankyou
heat and air settings?