How To Replace Engine Water Pump 2009-2018 Ram 1500
HTML-код
- Опубликовано: 8 сен 2024
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEW...
This video shows you how to install an engine water pump on your 2009-2018 Ram 1500. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2009 Dodge Ram 1500 Truck
2010 Dodge Ram 1500 Truck
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaIZ/1A...
• Pocket Screwdriver
• 19mm Wrench 1aau.to/oEw/1AX...
• 10mm Socket 1aau.to/oavm/1A...
• 13mm Socket 1aau.to/oaHo/1A...
• 15mm Socket 1aau.to/oaHo/1A...
• 16mm Socket 1aau.to/oaHo/1A...
• 8mm Socket 1aau.to/oavm/1A...
• Fan Clutch Wrench
• Serpentine Belt Tensioner Tool 1aau.to/obh/1AX...
• Trim Tool Set 1aau.to/oKi/1AX...
• Channel-Lock Pliers 1aau.to/ogT/1AX...
• Hose Clamp Pliers 1aau.to/ods/1AX...
• Air Chisel 1aau.to/oax/1AX...
• 1/4 Inch Ratchet 1aau.to/oavm/1A...
• 3/8 Inch Drive Ratchet 1aau.to/oaHo/1A...
• Socket Extensions 1aau.to/oaHo/1A...
• Torque Wrench 1aau.to/o74/1AX...
• Pipe Thread Sealer
• Drain Pan 1aau.to/opR/1AX...
• Pick 1aau.to/oxU/1AX...
• Razor Blade / Gasket Scraper 1aau.to/ofz/1AX...
• Rubber Mallet 1aau.to/od4/1AX...
Subscribe: / @trq
Check out our playlist:
Ram 1500 Pickup 2009-Present 4th Generation: • Ram 1500 Pickup 2009-P...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This was absolutely incredible.
Still took me 7 hours from start to finish, but this guide left no room for doubt and I have successfully completed this project on my 2013 Ram.
I cannot thank you enough for the level of detail, not only in the video, but also the written information on what is needed.
You rock!
I have watched many how to videos on YT but this video without a doubt is the best most thorough most easy to follow video I have ever watched..... amazing job brother, Thank you very much.
As others have said, this is one of the best instructional videos on yt.
Fantastic job, keep up the amazing work!
If your gasket comes off of the thermostat when you pull it out, make sure you put the gasket ON the thermostat. Not behind it.. not in front of it. ON IT. RIP a gallon of coolant.😢
Definitely one of the best videos. No annoying music, or needless blabbing. Thank you everything to the point
nice tip on the thermostat pin
Such an amazing video, giving all the socket and wrench sizes saved me so much time, i grabbed a tray and pulled them all ahead of time, very detailed, without this video i may have been in over my head, which means i would have to call my father in law (retired mechanic) but i only had to call him to discuss the color of the antifreeze that was in the truck originally
I'm not sure about the razor blade. I like to use a plastic scraper so I don't scratch the aluminum and create a problem where it may start to leak. Also a dish washing sponge with an abrasive side works well...that's just me though
Now that is how you do a "how to" video. Can't thank you enough! Great job.
Thanks a million for making this video, very accurate, descriptive and just made this job so much easier!
Motor city mechanic has a great video on bleeding coolant on 5.7 . Just remove bleeder and fill to coolant comes out and seal .
Excellent and very helpful video! I just ordered a new Mopar water pump for my '09 Dodge Ram and will be watching this again as I replace mine.
Thanks for posting this!! 👍👍
+@user-xz5ps5hj6v Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Update.....watched your video last evening and changed my 2012 water pump this morning. Your tutorial was spot on. Thank you so much👌
Thanks for all the info., my son and I are going to install a new water pump on a 2016 Ram this weekend and this video will heip alot.
This might be the best instructional video I've ever found for any of my vehicles. Keep up the good work!
Great video. I had a few different items on my 2010 ram 1500
I have 2 fans, one is electric mounted to the radiator. The electrical connection mounted to the fan shroud.
Why was the air box cover and sensor removed for this? Clearance for the AC lines to be out of the way?
I really enjoy the content of this channel! The details and helpful tips to get the job done properly are very helpful! Thank you!
Great video. Nothing annoys me more then needless yibber yabber that adds several minutes or more to a video. Keep up the great work and great videos!
You can also remove the reservoir hose and use something to suck the fluid out into a pan below. Once the vacuum is started gravity will do the rest.
Tha absolute best instructional video ever. Thank you so much for the content. Please keep up the work. Thanks again.
Excellent video, incredibly easy to follow and very thorough.
Here's a tip to eliminate one disassembly step. After disconnecting the air intake snorkel from the throttle body and pulling off that other tube from the air filter box just lift out the entire airbox with the air intake snorkel still attached. No need to open up the airbox. It leaves more room and no worries of contaminating the K&N air filter. I know this vehicle doesn't have one but it should.
Your video worked perfect on my 2011 Dodge Ram and I can't thank you enough for making this video. You did an amazing job!
Your guys videos are always so informative and complete well done and thank you for presenting
The best
Excellent and professional video! Very helpful - THANK YOU!
Thank you for this video. It was super helpful.
Best video for this job. Detail is top notch.
Thank you so much for this video!!!
Very well thought out video. The Ram book time is three hours to replace the water pump. How long would it actually take assuming having all the correct tools and a hoist?
I appreciate your instruction, well done!
great video, thanks!!
I watched the video and bought the water pump and radiator from 1A, because I want to overhaul the system. However, I am having a lot of trouble removing the fan. The nut is frozen on. I tried the big wrench and hammer first, and when that didn't work, I bought a pneumatic fan clutch wrench like you used in the video. However, mine is not coming off. I'm anxious to get on with job. Do you have any suggestions? My compressor produces 5 CFM @ 90 psi. Do you know if that's enough power? Thanks
Very good video. Thank you.
+Bob Fish Thanks for watching our video! 1aau.to/m/Shop-TRQ
what's the timeline?
Thanks brother 😁
+Explorando la naturaleza con odali Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
2 questions. What did you spray on the pullys near the end to clean off the coolant before putting the belt on? What was that screw you tightened on the new pump near that centered stud bolt? Looks like an Allen screw?
He’s the best host
Great video, Ty!
I had this exact procedure done to my 2014 Ram 2500, new water pump and thermostat, but now it sounds like my cooling fan is really loud upon acceleration. Any advice or input is appreciated!
Excellent video 😊. Make it look easy. Ty
very well done video! totally saved me thank you.
Thank you
Quick question, the coolant supposed to be pink or purple and the one you installed is green. Does it make a difference in your opinion to install that type of coolant. I know is kind of hard to find the correct one so it makes me wonder.
Thought I was gonna have to take the front of my truck off for this😅. This is nowhere near as bad as I was imagining
Instead of a bleeder screw my 17 Laramie has a hose port. All the superseded and aftermarket pumps all have the plug. My original pump was discontinued. Anyone know what the hose is for since I can’t find anything about that ?
my clutch fan moves when i start hammering it
Wow.
Now I really understand why it costs so much to have that done.
What did he spray on the pulleys?
Can you did this on a harder car instead of easy trucks
This guy sounds something like chrisfix.
How much for a work like This?
Hold up, that's the guy from 1A Auto...
+Casey Strong Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great Video... But That coolant was pink/ orange when he first drained it..... Not green.. Mopar uses Pink/ orange... I say pink /orange because in plain sight that coolant looks pink but the dealership says it's orange but there's a complete difference between " ORANGE COOLANT AND MOPARS PINKISH ORANGE COOLANT.... I say this because I own an DODGE CHARGER AND IT DOESN'T TAKE GREEN COOLANT BUT THE PINKISH COLOR COOLANT.
GREAT VIDEO BUT PLEASE USE THE RECOMMEND COOLANT FOR MOPARS...FOR ANYONE WHO OWNS A MOPAR.. NOT TAKING AWAY FROM "Mr. Nice"
This looks nothing like my 2011 dodge ram 🤦
Probably because you have a V6
Bruh why y’all didn’t show each bolt one by one
Excellent video! I replaced all of this today. However, there is play in the new Serpentine Tensioner. Is this normal, or should this part be non-moving. Not sure if it's doing its job of tightening the Serpentine belt or if it needs to be tightened so that it has no movement??
I was curious about bleeding the coolant when it’s full. Won’t running my truck with the cap off spray coolant everywhere?