OMG! I use Sketchup 3 years and now I didn't know a lot of this. I use various plugins to do chamfers, bevels and fillets. I think I will start to do them with this method. Thanks a lot for sharing!
To think I always used to select a surface and then drag it along the endless string of line only to hope the final mesh is clean and solid without any gaps offace holes or any other nasty shenanigans when you can just select the entire edge path and just click once for sketchup to do it perfectly fine for you... And i considered myself a pro at sketchup xd. You're a lifesaver, Justin
Oh my this is my first time on your channel and in this video you are announcing 50 000 subscribers... you have 10x that now, I will not be the 50 000th subscriber but somewheree 10 x that, congratulations. I'm looking forward to watching more vids
This tip was perfect for me! I use SketchUp to show home renovations and mitering objects like trim & base and cab doors by hand used to take SO long. Thank you!
So much wasted time when, instead, I should have come directly here to Essentials. Simple concise 'exactly what was needed' instructions. Worked first time. Thanks very muchly!
Whaaaaaat? I love the follow me tool. I use it when making baseboards and ceiling profiles. But I never knew that I didn't have to spend a ton of time spinning around a room's floor to select all the lines... that I can simply click on the face! Cool beans! Thanks, Justin!! 🙌🏽
Hi there! Very new to SketchUp and incredibly pleased to have found your channel. The wine glass just blew my mind. Excited to learn more; keep up the great work! :)
Thanx so so much. I love your tutorials and usually everything works out nicely! But with the ball I have a problem. I am still using Sketchup free (2017) and I followed step by step, but after clicking (I tried once and double) within the groups, nothing happens. I once managed getting the belt with exploding group before. Why is that?
What about rounding corners on a box, but the bottom is 1/2" offset inside so the corners angle down, but towards the interior. I hate using words to describe images lol
I have two overlapping rectangles that are components. I have watched every tutorial i can find and I cannot get a clear answer on how to remove the overlapping material from one of the rectangles. I am using SketchUp Make 2017.
Just starting to learn SketchUp Thanks for posting Truly Amazing. I have used AutoCAD and Draftsight in the past 2D Free Draft sight will no longer be available after the end of 2019, I didn't want to learn new software but I think they may have done me a big favor forcing me to look at SketchUp Make.
Why isnt there a video showing how to take a bed post photo, import it in sketch up and then make a 3 d image of it that could be imported into Cabinet Vision?
@@workshopsdavidtsmith Yeah! And also why isn't there a video of how to 3D scan an individual hair strand, import into Sketchup, and duplicate it at various lengths so we can all import the result into our Hollywood Hair Salon Makeover Deluxe 3.0 software?
Hey, Justin. I had the follow me tool working just fine yesterday, but now when I select a path and then select the follow me tool, it un-selects the path. I've tried selecting the path first. Tried selecting the profile I want to follow the path. but, what ever I select gets un-selected when I try to activate the follow me tool. Help me understand what I'm doing wrong, please. As always thank you for your awesome videos.
Extrude along a line or spline just seem impossible with SketchUp. The Follow Me and Keep doesn't really provide great results at all even if it manages to keep model upright. Is that the only "follow me" plugin there is? Pipe Along Path doesn't really work since it can only do a perfect round along a line.
Love the Tutorials. I've always liked Sketchup because of it's ease of use and versatility especially if you add PLUGINS, but I'm deeply disappointed they removed the Terrain from Geolocation Import. That's a real kick in the bunny bits.
@10:44 - I’ve tried multiple times to create a curved solid (a rounded fireplace) using the follow me tool to extrude a simple recurve shape around a 90 degree arc. The result should look like 1/4 of an 14’ foot tall, inverted vase or jug. Each time, the extrude is funky, with a notch in the corner at the center of the arc because the extrude jumps outside the selected path at the top. The extrude looks fine at the bottom 6” but the whole solid is slightly wider at the top than on the bottom. The curved profile is clean and correct but the vertical edges of the resulting solid lean outward, outside the vertical plane at the radii of the 1/4 circle. It’s kinda bizarre. I’ve started over with new geometry, made sure the profile I’m extruding is 100% vertical and still, the same, weird result. Thoughts?
I'm having problems with follow me drawing half-moon circle up a spiral/coil shape. The spiral causes the follow me to twist/spin on itself as the half-moon makes its way up the coil.. It is really infuriating. Any solutions?
So I create a group like a handrail that has a unique top rail and then intermediate rails at 4" OC (7 groups nested in a larger group). I create the line that I want to follow. Sketchup pro 2019 doesn't seem to allow me to select the railing group and then to follow the line. I can get rid of all the groups and individually use the tool for each one. But when I download or create a more complicated shape that doesn't work. It seems that tis tool should be able to be used with a group. WHat am I missing?
I am pretty new to Sketchup's Follow Me tool, and almost every time I try to do a circular extrusion, I get the following message: "Warning the path you have selected does not start or end on the extrusion cross section. Unexpected results may occur." And it is correct, because the results are not what I want. If I try drawing a chain link using two parallel lines with a arc closing both ends, I get the warning and then a chain link with pieces missing in both end curves. I know it probably is a simple error on my part, but I just can't find it.
Hi, great video. Buuuuut, I have a question, you used only 24 segments. I tried to make a Sheave with a radius of 15 and 106 segments. For the life of me, I cannot get that Follow Me function to work on that. How would you make a Sheave/Pulley that's as round (max segments) as possible???
@@Thesketchupessentials Thanks for your reply. When I use the original amount of segments, it works. Once I increase the amount, it starts messing up my Sheave. Here's a quick video to show the difference between 24 segments and 106 segments (With 24 segments it looks like I need it) ruclips.net/video/-g43TSdtGoM/видео.html
Try scaling your object up about 5x, running follow me, then scaling it back down again. If your object is fairly small, SketchUp may be having trouble creating all the tiny little edges associated with a smoother curve...
Five years and I didn't know the path doesn't have to be attached to the face or line to be extruded. It's a Yogi Berra moment. On the other hand, more "complex casework" we don't need, but it's good for laying out geothermal lines. The "reverse" FollowMe is similar to how Sketchup extrapolates a topographical sheet from a Google Earth *.png . That was another Yogi event.
Hi Justin. Thank you for your tutorials, they are very helpfull. I'm doing alot of interior renders in Sketchup now. I'm wondering if you know how to import 3Ds max file with all textures to Sketchup. I have huge library with interior furnitures but they were made in 3Ds max. I can import one by one and apply all textures but it takes time.
@@Thesketchupessentials you appear to have premade scenes. I would like the students to complete this tutorial but wanted a quicker way than having to recreate all the scenes.
Another clear, concise and to the point video. If you’re serious about learning sketchup this is the channel to follow.
Thank you! :)
I knew I was doing something wrong (for years) with the follow me tool and you fixed it in 30 seconds! Great video! I'm going to "follow" YOU now!
Same here! haha
Game changer. Been using sketchup for about a year now and dont think i have used this once until now. Cheers
Awesome - glad you liked it!
OMG! I use Sketchup 3 years and now I didn't know a lot of this. I use various plugins to do chamfers, bevels and fillets. I think I will start to do them with this method. Thanks a lot for sharing!
Awesome - glad it helped! :)
To think I always used to select a surface and then drag it along the endless string of line only to hope the final mesh is clean and solid without any gaps offace holes or any other nasty shenanigans when you can just select the entire edge path and just click once for sketchup to do it perfectly fine for you... And i considered myself a pro at sketchup xd. You're a lifesaver, Justin
Thats exactly why my model has tiny micro missing holes. Whenever i wanted to clean it up all face was gone
My face while watching this video:😲😲😲😲😲😲😲
This is SUCH a great tool to learn. Thanks!!
Oh my this is my first time on your channel and in this video you are announcing 50 000 subscribers... you have 10x that now, I will not be the 50 000th subscriber but somewheree 10 x that, congratulations. I'm looking forward to watching more vids
This tip was perfect for me! I use SketchUp to show home renovations and mitering objects like trim & base and cab doors by hand used to take SO long. Thank you!
So much wasted time when, instead, I should have come directly here to Essentials. Simple concise 'exactly what was needed' instructions. Worked first time. Thanks very muchly!
Glad it helped!
Thank u so much for the great useful information 👍🏼.
Sometimes the videos that review the basics are the best. Thanks Justin
Thanks Steve! Glad you liked it!
Whaaaaaat? I love the follow me tool. I use it when making baseboards and ceiling profiles. But I never knew that I didn't have to spend a ton of time spinning around a room's floor to select all the lines... that I can simply click on the face! Cool beans! Thanks, Justin!! 🙌🏽
This was waaaaayyy beyond helpful, thank you
Very useful procedures, now I know it's easy as 1 2 3..
Thanks folk.. Keeping you touch
Thank you a love the way you explain things. learning more from you than from my course. Thank you. thank you.
This is gonna save me so much time and work
Hi there! Very new to SketchUp and incredibly pleased to have found your channel. The wine glass just blew my mind. Excited to learn more; keep up the great work! :)
you are the most helpful content creator.... Thanks a lot for these tutorials
I was having so much trouble with the Follow me tools. thanks a lot for the video
Really glad it helped!
Very useful tutorial, I was avoiding follow me tool as hell!
It's actually pretty easy once you learn how to use it. Glad it helped!
Great tutorial on Follow me. I am just beginning in sketchup and this tool will be an essential in my tool bag
Glad you liked it!
thankyouuuuuu soo much 🙌🏻🙌🏻🙌🏻
Thank you so much Sir. It help us alot.
Thanks for the video, it took me a little while to get used to it but with practice it will be a very valuable tool to use.
This is the best tutorial for follow me tool. Thanks bro!
Never knew that about planes and follow me. Thanks!
👍
Amazing Tutorial.😊
Sir, I can't execute the part on the @5:02
I already followed the step by step procedure. what's the problem with my work. :(
It says "It does not appear to be a valid path"
Well then your path isn't a single continuous path and you'll have to fix that
I am used to programs that have a revolve tool and was using this tool incorrectly. It was infuriating! This was extremely helpful. Thanks!
Awesome - glad it helped!
Great pause while you counted the sides on the hexagon!! (I do that, too) 🤣
All the time! 😎
I Follow all your tutorials and all that really help me learning sketchup tools in different ways. Thanks..
Big help! Thanks!
This video had exactly what I was looking for - thanks!
Glad it was helpful!
Thanx so so much. I love your tutorials and usually everything works out nicely! But with the ball I have a problem. I am still using Sketchup free (2017) and I followed step by step, but after clicking (I tried once and double) within the groups, nothing happens. I once managed getting the belt with exploding group before. Why is that?
What about rounding corners on a box, but the bottom is 1/2" offset inside so the corners angle down, but towards the interior. I hate using words to describe images lol
Great Explanation. Thanks from Bangladesh.
Welcome!
Thank you so much....I appreciate the way you teach sketch up..I'm learning from you..😊😊😊
.
.
Thanks a lot
Thank you so much. I have learned a lot in just 13 minutes video.
Glad it was helpful!
Very clear explanation of the "follow me" tool. Thanks!
Thanks! :)
I have two overlapping rectangles that are components. I have watched every tutorial i can find and I cannot get a clear answer on how to remove the overlapping material from one of the rectangles. I am using SketchUp Make 2017.
I'm having a bit of an issue with this tool. The shape is good, but there are lines all over it. How do I fix it? I hope you can help me.
Thanks.
Great instruction Justin. 2 thumbs up!!
Glad you liked it!
Thanks for another quick help.
Just starting to learn SketchUp Thanks for posting Truly Amazing. I have used AutoCAD and Draftsight in the past 2D Free Draft sight will no longer be available after the end of 2019, I didn't want to learn new software but I think they may have done me a big favor forcing me to look at SketchUp Make.
Really helpful ... Thank you !
This was fascinating. Follow Me has always been one of my greatest weaknesses,, and this really helps a lot. Thanks!
Why isnt there a video showing how to take a bed post photo, import it in sketch up and then make a 3 d image of it that could be imported into Cabinet Vision?
@@workshopsdavidtsmith Yeah! And also why isn't there a video of how to 3D scan an individual hair strand, import into Sketchup, and duplicate it at various lengths so we can all import the result into our Hollywood Hair Salon Makeover Deluxe 3.0 software?
I didn't know Follow Me can work after opening the group! Nice! :)
I didn't either until recently - super helpful!
Great examples Justin. Thanks for you clear descriptions!
Glad you liked it!
thank you
Thanks... I love it...
I'm glad you like it!
Hey, Justin. I had the follow me tool working just fine yesterday, but now when I select a path and then select the follow me tool, it un-selects the path. I've tried selecting the path first. Tried selecting the profile I want to follow the path. but, what ever I select gets un-selected when I try to activate the follow me tool. Help me understand what I'm doing wrong, please. As always thank you for your awesome videos.
Now I'm even more frustrated. I got it to work, but I don't know what I did. Now it won't work again.
Tks man!!
Extrude along a line or spline just seem impossible with SketchUp. The Follow Me and Keep doesn't really provide great results at all even if it manages to keep model upright. Is that the only "follow me" plugin there is? Pipe Along Path doesn't really work since it can only do a perfect round along a line.
Wowwwwww!!!! Thanks TONSSSSS
nice job good explanations :)
Thanks!
Love the Tutorials. I've always liked Sketchup because of it's ease of use and versatility especially if you add PLUGINS, but I'm deeply disappointed they removed the Terrain from Geolocation Import. That's a real kick in the bunny bits.
@10:44 - I’ve tried multiple times to create a curved solid (a rounded fireplace) using the follow me tool to extrude a simple recurve shape around a 90 degree arc. The result should look like 1/4 of an 14’ foot tall, inverted vase or jug. Each time, the extrude is funky, with a notch in the corner at the center of the arc because the extrude jumps outside the selected path at the top. The extrude looks fine at the bottom 6” but the whole solid is slightly wider at the top than on the bottom. The curved profile is clean and correct but the vertical edges of the resulting solid lean outward, outside the vertical plane at the radii of the 1/4 circle. It’s kinda bizarre. I’ve started over with new geometry, made sure the profile I’m extruding is 100% vertical and still, the same, weird result.
Thoughts?
Dear Sir, Thank u so much... for your ...elaborate..explanations.
....elaborate...? You're...welcome... :)
just amazing ! it helped a Lot ! thank you !
I'm having problems with follow me drawing half-moon circle up a spiral/coil shape. The spiral causes the follow me to twist/spin on itself as the half-moon makes its way up the coil.. It is really infuriating. Any solutions?
ruclips.net/video/Olbr8R8A0dQ/видео.html
Who gives a thumbs down for this great video??? There monitors must have been broke🤔 keep it up , love your video's 👍 from me!
Lol - people can have opinions I guess - glad you liked it! :)
Thank you so much! Great video tutorial!! You are an amazing teacher!
Glad you liked it! :)
wonderful 🎉
How can I curve all the edges of a cube with followme tool
I did exactly what you did but mine only highlights the surface…
Amazing! Thank you very much!!!
Great video very helpful
Thanks - glad you liked it!
Great! Thanks!!)
Good job sir😄
Thanks!
Super this video very help full for me keep it up brother
Thanks,very useful, sir
Glad you liked it!
Amazing video, thanks man!
Thanks! Glad you liked it!
Thanks!!!!!!!
Excelente thank you
Thanks for watching!
"Follow me" a group by right click then to Edit group is very useful. Thank you
Best.mi enjoyed ur twin motion tutorials. Best
2022
Is there a way to take all of the lines in your model and force them to lie on a horizontal face?
You could create a copy and flatten them with FredoScale - ruclips.net/video/uRatu9YJzIo/видео.html
So I create a group like a handrail that has a unique top rail and then intermediate rails at 4" OC (7 groups nested in a larger group). I create the line that I want to follow. Sketchup pro 2019 doesn't seem to allow me to select the railing group and then to follow the line. I can get rid of all the groups and individually use the tool for each one. But when I download or create a more complicated shape that doesn't work. It seems that tis tool should be able to be used with a group. WHat am I missing?
I guess I don't quite understand the issue - The follow me tool only follows a single path, so it won't follow all or the rails at once...
Hey I want to ask,do we have "wield" and "shape bender" already in SU,not that we have to download the plugins by ourselves?
i realy love u man ? thanks so much for sharing
Glad I could help!
thanks
Thanks for watching!
Pls make a video, how the bending parts to be done ... Using sketch up, the bend radius should be editable....
Amazing video!
You manage to demonstrate and explain things in such a intuitive way.
Keep up the good work.
Wonder ful
I am pretty new to Sketchup's Follow Me tool, and almost every time I try to do a circular extrusion, I get the following message: "Warning the path you have selected does not start or end on the extrusion cross section. Unexpected results may occur." And it is correct, because the results are not what I want. If I try drawing a chain link using two parallel lines with a arc closing both ends, I get the warning and then a chain link with pieces missing in both end curves. I know it probably is a simple error on my part, but I just can't find it.
Hi, great video. Buuuuut, I have a question, you used only 24 segments. I tried to make a Sheave with a radius of 15 and 106 segments. For the life of me, I cannot get that Follow Me function to work on that. How would you make a Sheave/Pulley that's as round (max segments) as possible???
The number of segments shouldn't affect this. Does it work if you have less segments?
@@Thesketchupessentials Thanks for your reply. When I use the original amount of segments, it works. Once I increase the amount, it starts messing up my Sheave. Here's a quick video to show the difference between 24 segments and 106 segments (With 24 segments it looks like I need it) ruclips.net/video/-g43TSdtGoM/видео.html
Try scaling your object up about 5x, running follow me, then scaling it back down again. If your object is fairly small, SketchUp may be having trouble creating all the tiny little edges associated with a smoother curve...
@@Thesketchupessentials Thanks, that did the trick. It looks like SketchUp cannot handle the smaller things in life ;-)
absolute geezer
YOu! Legend!
Five years and I didn't know the path doesn't have to be attached to the face or line to be extruded. It's a Yogi Berra moment. On the other hand, more "complex casework" we don't need, but it's good for laying out geothermal lines. The "reverse" FollowMe is similar to how Sketchup extrapolates a topographical sheet from a Google Earth *.png . That was another Yogi event.
YES SIR 👍
👍
I find this so frustrating
'I can never get this to work- I follow the instructions and yet it refuses to work.
the goat
Hi Justin. Thank you for your tutorials, they are very helpfull. I'm doing alot of interior renders in Sketchup now. I'm wondering if you know how to import 3Ds max file with all textures to Sketchup. I have huge library with interior furnitures but they were made in 3Ds max. I can import one by one and apply all textures but it takes time.
Sorry - I don't really have much experience with 3DS Max, so I'm not sure I can help you with this one...
how to design iphone's corner ?
Thanks good viedo
Thanks for watching!
does it work in sketchup 2017
Did you try it in SketchUp 2017?
you are the best
Glad you liked it!
Do you have the template for this?
A template for what exactly?
@@Thesketchupessentials you appear to have premade scenes. I would like the students to complete this tutorial but wanted a quicker way than having to recreate all the scenes.
Tutorial tip: say what you do. When you click on something, say "I select this triangle here then I click this xyz tool icon there".
Ummm...thanks? Generally speaking I do this