Mark here.....really glad that you did show the total time the machine took to make the key. Thanks again for another video....I always learn by watching you. Glad to see your busy and doing well.
You? X-horse? Say it ain’t so!!! LOL! Having pretty good luck with the Dolphin XP-005 myself. Still aspiring to the Gymkana 994 myself though. Thanks for sharing your learning experience!
There great machines. I used them before out west. If you can get over how slow they are your home free. I have problems with my Futura Auto finding the correct key for the car I'm working on sometimes, and have to go looking. It's frustrating especially when you have 5 jobs to go, and it 3 o'clock. However I love the machine. It's a work horse. Edge cut keys, I still punch them, or use my 1200. So I don't have to change clamps.
Another quality video without filler, just facts. Thank you for making these , I am new to automotive and learn something new every time. I know you have multiple programmers but what do you stock or auto keys, fobiks, remotes etc. I could go on but my comment would be longer than the video. Merry Christmas
What is your favorite programmer? Have an APP and want to add a programmer. Was thinking about the im508 on price point. I see you use it as well. What would you add?
Jay how long have you had the condor? I bought one 6 months ago after I cut about 50 keys the operating system crashed and it took 3 months to get it fixed. It’s back and working great. Found out that every 2022 condor shipped to Australia as had the same issue. Good luck with yours
Write up the invoice, while it is running, or clean up the truck..... the fact that these machines calibrate for EVERY cycle is a plus. Great for "laser" type cuts, I just HATE how these cut a standard blade key.... I can not deal with the XHORSE updating, so I have a different, but similar machine, with USA tech support in my van, and a Laser Key Products machine in shop
Even though this is a ford. I got a 2016 ram 3500 that needs a win module. I don’t see a procedure for win replaced function. I only see radio frequency hub replaced function. Would I only need to program the fobiks to the win module??
I seen your 2011 ram video. But I don’t see the function on my tool for win replaced. I’m looking to see if a 16 model year is the same. I only see rfh replaced which I have not. Do you just program the fobs to the win? I don’t see where it asks if the vin is correct. Like in that video.
I seen your 2011 ram video. But I don’t see the function on my tool for win replaced. I’m looking to see if a 16 model year is the same. I only see rfh replaced which I have not. Do you just program the fobs to the win? I don’t see where it asks if the vin is correct. Like in that video.
I'm thinking of buying that Condor 2 as a back up machine... I have Keyline Ninja Laser and Ninja Total machines... but neither can cut BMW BDC keys.... 😡 love your videos .. merry Xmas.. 👍
I don't know if the condor is like the dolphin, but I made you a quick video just in case you did not know about the speed settings. ruclips.net/user/shortsCnpChACvup4?feature=share
Mark here.....really glad that you did show the total time the machine took to make the key. Thanks again for another video....I always learn by watching you. Glad to see your busy and doing well.
You? X-horse? Say it ain’t so!!! LOL! Having pretty good luck with the Dolphin XP-005 myself. Still aspiring to the Gymkana 994 myself though. Thanks for sharing your learning experience!
LOL We all have toys, mine just cost a bit more :)
Nice to have a new machine to learn and play with. Thanks for this video, cheers mate
Nice to see you PW. Cheers
WoW Looks Good Great Job Everyday Is A School Day. Smart People Like You Never Stop Learning, 👍
I wouldn't say smart, just a guy learning by trial and error 👍
Great video! I also just bought the same machine and went through the same learning curve and brain facts you did
Cool ! Maybe if I screw something up or do it the wrong way, you can teach me :)
Thank you for your videos
Glad you like them!
Thanks Jay! This saved my ass this morning.
Glad to help
Right Jay! Should be able to do this on the Dolphin as well. Thanks Brutha!!
Should be the same as far as I know.
I have both dolphins great machines but the new condor is a waste of money
I would suggest a 2.0 or 2.5 for high security internal channel keys. Thanks for the video.
Thanks for the input.
There great machines. I used them before out west. If you can get over how slow they are your home free. I have problems with my Futura Auto finding the correct key for the car I'm working on sometimes, and have to go looking. It's frustrating especially when you have 5 jobs to go, and it 3 o'clock. However I love the machine. It's a work horse. Edge cut keys, I still punch them, or use my 1200. So I don't have to change clamps.
Time will tell how it works out, it's kinda hard to compete with the Keyline machines.
I noticed it's not mounted on the van yet; just trying something new?
Appreciate all your videos. Thank you for sharing the knowledge 😎👍
I will get it mounted, just tinkering with it for now.
thannnnnnnnnnnnk youuuuuuuuuuuuuuuuuuuuuu
Your welcome.
Another quality video without filler, just facts. Thank you for making these , I am new to automotive and learn something new every time. I know you have multiple programmers but what do you stock or auto keys, fobiks, remotes etc. I could go on but my comment would be longer than the video. Merry Christmas
I try to stock everything OEM and aftermarket and trust me, you will never have every key you need. Thanks for the comment.
What is your favorite programmer? Have an APP and want to add a programmer. Was thinking about the im508 on price point. I see you use it as well. What would you add?
I would get a SmartPro and use it for what the APP can't do.
Right on. Thank you !
Have you had any issues with your condor? Trying to decide between this or the dolphin
I haven't had any issues but a friend has.
I got the same one. Where do you order your test keys? I can’t locate any
HU101 JMA ILCO
Jay how long have you had the condor? I bought one 6 months ago after I cut about 50 keys the operating system crashed and it took 3 months to get it fixed. It’s back and working great. Found out that every 2022 condor shipped to Australia as had the same issue. Good luck with yours
If it craps out, I'll be sure to do a video telling people what a POS it is. Maybe I'll run it over with my van. LOL
We’re you successful in programming it?
I was cutting the keys for the dealer.
Write up the invoice, while it is running, or clean up the truck..... the fact that these machines calibrate for EVERY cycle is a plus. Great for "laser" type cuts, I just HATE how these cut a standard blade key.... I can not deal with the XHORSE updating, so I have a different, but similar machine, with USA tech support in my van, and a Laser Key Products machine in shop
I have the Keyline 994 and the Gymkana 994. I'm just messing around with the Condor.
Even though this is a ford. I got a 2016 ram 3500 that needs a win module. I don’t see a procedure for win replaced function. I only see radio frequency hub replaced function. Would I only need to program the fobiks to the win module??
If you search, I have a couple full videos on WIN module replacement.
I seen your 2011 ram video. But I don’t see the function on my tool for win replaced. I’m looking to see if a 16 model year is the same. I only see rfh replaced which I have not. Do you just program the fobs to the win? I don’t see where it asks if the vin is correct. Like in that video.
I seen your 2011 ram video. But I don’t see the function on my tool for win replaced. I’m looking to see if a 16 model year is the same. I only see rfh replaced which I have not. Do you just program the fobs to the win? I don’t see where it asks if the vin is correct. Like in that video.
Newest one I seen in your videos was a 2012
@@philh9238 What tool are you using ?
It’s about damn time for a new video, still waiting for the pink bike reveal!
You just wait till I find myself that perfect bike. I have been slacking a bit.
@@locksny yeah, and someday I suppose you’ll be a real locksmith too🤣
@@NateGodin77 Didn't you see me struggling in that video ? 😁
@@locksny success is built on a foundation of failures, keep failing young grasshopper and maybe you’ll make it someday.
@@NateGodin77 I'm not to sure about the young thing 🤔
I'm thinking of buying that Condor 2 as a back up machine... I have Keyline Ninja Laser and Ninja Total machines... but neither can cut BMW BDC keys.... 😡 love your videos .. merry Xmas.. 👍
That's wild, they don't have a jaw you can buy for it on the Ninja ?
What machine do you use that’s faster… I’m interested?
I ask because I have the exact machine.
I have the Keyline 994 and the Gymkana 994.
🤓👍
👍🤓
I don't know if the condor is like the dolphin, but I made you a quick video just in case you did not know about the speed settings.
ruclips.net/user/shortsCnpChACvup4?feature=share
Wont open from the link.