I just entered bike crank removal and to my pleasant surprise ur channel showed up. I'm subscribed to u 4 u canal boat activities. Very helpful. Just hoping the puller fits.
was just woundering, when on the first bike , you take the cover cap off and take the nut off, what size socket do you use, im just needing to change the arm on the chain side of the bike and i'm looking on amazon for sockets and wanting the right size. thanks :)
Thanks man you save my bike! I thought it was broken, but the bolt was just loose. Now all I need is a 14 millimeter socket tool! Once again, THANKS A LOT MAN!
Your video showed me exactly what I have to do i have to buy a bike crank remover and then the crank arm will come off i hope the coloured tyres do they show up at night better
Ah, the good old simple days...before Hollowtech2, BB90/BB95, PF86/92, BB30, BB30A, PF30, BBright, BB386 EVO, and a new one on the horizon, a threaded BB30. Also we only used to have to worry about spindle length for chainline and BB spacing purposes; now there are many spindle diameter differences as well...the bottom bracket industry has gone insane!
@@teneightypee6999 guess what happens when the cheap ass threads strip out using that special tool? Switch from hammer to angle grinder to cut everything off. I’ve had about a 50% success rate doing this. It’s never failed that the threads gets ripped right out of the crank arm when I’ve done this. Then it’s a complete shitshow.
My crank arm on the non driver side has unfortunately all de threaded and I cannot attach the remover tool. Any tips on what I could do to remove? (I am not keeping wither crank or bottom bracket so not worried about damage)
Can't get it to budge, been at it for an hour. Cut myself and bled all over it, I guess mine is seized or something? I've even tried at wrong on the spanner and tool, nothing is budging this
My bike has a smaller thread then the extractor, so I went back to halfords to tell them that the first big part of the extractor doesn't screw in and they tell that there's nothing to do to undo it because it is a Chinese bike and they have no extractor for that, would you have another option to open it please?
Great video. Looks easy enough to do. I need to research the laws specifically, but I believe removal of pedals/cranks can get a motorized bike classified as a motorized scooter in California, removing any requirements for licensing like a motorized bike or motorcycle.
Best explanation I’ve seen, just straight to the point and no jargon or difficult words
Perfect video for what I needed to know. So good of you to use other examples of Cranks. 10 out of 10 👍
Thanks for this mate! I've been staring at my crank with dread the past couple of days!
I just entered bike crank removal and to my pleasant surprise ur channel showed up. I'm subscribed to u 4 u canal boat activities. Very helpful. Just hoping the puller fits.
I got a Carrera bike without the right pedal and I saw this video and helped me with information but I need a tool fot that
Thank you very much. I would have spent a load of time and never got it. Now I know that I need to buy the correct tool.
was just woundering, when on the first bike , you take the cover cap off and take the nut off, what size socket do you use, im just needing to change the arm on the chain side of the bike and i'm looking on amazon for sockets and wanting the right size. thanks :)
Thanks man you save my bike! I thought it was broken, but the bolt was just loose. Now all I need is a 14 millimeter socket tool!
Once again, THANKS A LOT MAN!
you're an absolute champion.
Love your step by step video
Thank you and cheers 😁
Glad you enjoyed it and it was useful!
Your video showed me exactly what I have to do i have to buy a bike crank remover and then the crank arm will come off i hope the coloured tyres do they show up at night better
Ah, the good old simple days...before Hollowtech2, BB90/BB95, PF86/92, BB30, BB30A, PF30, BBright, BB386 EVO, and a new one on the horizon, a threaded BB30. Also we only used to have to worry about spindle length for chainline and BB spacing purposes; now there are many spindle diameter differences as well...the bottom bracket industry has gone insane!
What about the crank without the nut inside the shaft, mine has a nut on the outside of one side that screws off but the arm won't slide out
Any way to get it off with out the crank tool?
Yes with a pulley remover
Hammer 💪💪
Thanks!! You really helped me with this video!
Thank you so much for this video. I've watched probably ten of these trying to find one that is short and to the point.
If I can’t get my crank puller to move, could I use a cheater bar for more torque?
i cant remove crank arm cus my gedora is too big for a small hole so it cant get in to screw it
hey, thanks for you very pedagogical instructions
what wheels are those? i have those but dont know what they are called and dont know where the name is. i need to buy new tires.
Now this is very helpful,
Love it
That's what the hell it is! It's called a wrench! Not what one prefers but by actual definition!! 😂🤣😂🤣😂🤣😂💀
Followed your instructions and it worked like a charm. Thank you, sir!
That is good to hear! Glad the video helped!
What’s this tool called?
Best video for this. Hello from cardiff
Thanks! I love the fact people are still finding these videos useful!
Oh definitely! I bought an old vintage folding bike on gum tree and stripping it and everything and this came in so handy
also I absolutely LOVE the colour ways on those bikes specially the newer one.
amazing illustration thank you
THERE'S A TOOL FOR THIS???
I've been beating it with a hammer trying to loosen it off. Crap. I need to see if I have one of these now.
pathfinderLXXIV yeah mate me too using hammer to remove and it doest work hahahahaha
Official_ Jason21 I literally am fixing my fixie right noe and I am currently hitting it with a hammer
LOL SAME
@@teneightypee6999 guess what happens when the cheap ass threads strip out using that special tool? Switch from hammer to angle grinder to cut everything off.
I’ve had about a 50% success rate doing this. It’s never failed that the threads gets ripped right out of the crank arm when I’ve done this. Then it’s a complete shitshow.
@@pathfinderLXXIV Haha
What are the names of the bike
Theres 3 14mm nut aswell
mine has the allen key, I still need a crank tool correct?
Exactly
My crank arm on the non driver side has unfortunately all de threaded and I cannot attach the remover tool. Any tips on what I could do to remove? (I am not keeping wither crank or bottom bracket so not worried about damage)
Looks like its now a part of your bike forever
Can't get it to budge, been at it for an hour. Cut myself and bled all over it, I guess mine is seized or something? I've even tried at wrong on the spanner and tool, nothing is budging this
My bike has a smaller thread then the extractor, so I went back to halfords to tell them that the first big part of the extractor doesn't screw in and they tell that there's nothing to do to undo it because it is a Chinese bike and they have no extractor for that, would you have another option to open it please?
A Chinese crank extractor lmao
awesome help!!!
THANK YOU SO MUCH FOR THIS!!!! (p.s. i love your accent ^u^ )
Haha thanks!
wow. that was a huge pain in the ass..
now to figure out how to put it back on..
Thanks, you have been of great help!
Great to hear! thanks for tuning in!
Thanks for this. Great instructions. Cheers
Great video. Looks easy enough to do. I need to research the laws specifically, but I believe removal of pedals/cranks can get a motorized bike classified as a motorized scooter in California, removing any requirements for licensing like a motorized bike or motorcycle.
tried with hammers but no luck
what about the crankset that needs an ellen key to take out
It is the same, first you remove the Allen key bolt and then you do the procedure with extractor
Cool bikes!
Thank you so that's how it's done.
Wasn't the crank I was looking for but I'll keep looking
Brilliant - thanks mate! ☺
thank you...for the help
Your a random guy lol great video thankyou
nice job!
Thanks, it seems this video has had a lot of views recently!
Ty
There’s 2 tools ah wth
Interesting accent but good video.
Thank you!
I can't even get the bolt off lol
I want to know how to remove them without using the fucking tool. Of course anybody can do it with the tool
That’s why there is a tool? It’s a specific type of tool for an uncommon job, I can’t imagine how hard it would be to do this without a tool.
Great now I can steal peoples bike stands