They did, it was the original slow stick then they discontinued them, Of course this model is not the same it's better. I don't know why all models with negative camber wings have been pulled off the market. Now the sell you computer controlled gyro flight systems and flaps and slats to make your plane slow. It's stupid, just engineer a plane to fly docile with a negative cambered wing and some dihedral and loose all the electronic crap. The old fogy balsa types of the 60's flew great, "Buddy" kits and some older SIG's no gadgetry just a design to fly slow and easy. There gone now unless you want to scratch build a balsa model dug up from someones attic and pay 300 dollars for the prints and precut parts. no electrics.Some guys are buying replacement curved wings for a glider and having luck making a slow flier from them.
Haha! A car drove over my first Slowstick. Only way I could see to repair it was to cut 3" off the smashed right wing tip, and that meant cutting the same amount off the good left side. Forever after it flew a lot better! Pleases me to see another SS get a trim.
May I ask what is the length of the wings and fuselage and tail section Is there any way to have a steerable tail wheel ? Any Information I get would be Appreciated very much I love this plane its just what I have been looking for, for a few years now I really want to build one , and can you use a arrow shaft for support of the thin foam down the body ? Thank you Sir I really hope to hear back from you ....
I don’t know the measurements of the plane. Yes you could add a steerable tail wheel. That would help in the wind. The wingtips are cut down he took out some dihedral. He removed the incidence. The vertical stab and rudder is own design. I have not seen Dave in 10 years I don’t have any plans . Sorry
@@dcimagesaz thank you for your reply are you the one asking question ? (in the video ) I guess its build it, and see if it flies ..I am on my own ....lol....what else is new in my world....!.....i will take any building tips you can offer ...thanks.....what is the incidence ?
Здравствуйте! Извините пожалуйста. Я хотел спросить чертеж, план и инструкцию по сборке. Я не занимаюсь бизнесом, я старый авиамодельщик. Хотели понять как вам делать крыло? Который выглядит как обтянутый тканью? Помогите, пожалуйста. Я просто влюбился в этот самолет. Красиво и аккуратно сделано. Вы молодец!
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
It definitely is the best looking slow stick I've ever seen too .
I wish some of these manufacturer's were able to have an original idea and put out kits like this. Super nice plane.
They did, it was the original slow stick then they discontinued them, Of course this model is not the same it's better. I don't know why all models with negative camber wings have been pulled off the market. Now the sell you computer controlled gyro flight systems and flaps and slats to make your plane slow. It's stupid, just engineer a plane to fly docile with a negative cambered wing and some dihedral and loose all the electronic crap. The old fogy balsa types of the 60's flew great, "Buddy" kits and some older SIG's no gadgetry just a design to fly slow and easy. There gone now unless you want to scratch build a balsa model dug up from someones attic and pay 300 dollars for the prints and precut parts. no electrics.Some guys are buying replacement curved wings for a glider and having luck making a slow flier from them.
Very sharp looking plane! GWS ought to take a look at that design and put it or something similar on the market.
My favorite plane. SO modifiable.
Wow! Best Slow Stick bash I've ever seen. Now that they are available again I think I'll do something similar.
Super plane, should license it out to make available commercially. Love the wheels, cowl. Great Job.
top flieger , schön geflogen , die fun Cup räder passen perferfekt
Haha! A car drove over my first Slowstick. Only way I could see to repair it was to cut 3" off the smashed right wing tip, and that meant cutting the same amount off the good left side. Forever after it flew a lot better! Pleases me to see another SS get a trim.
Wow this is one of the rc planes that I really want to buy
Friggin gourgous !!! Great vid Dude !!!😉😎
I think I'll make my own using an arrow shaft, $ tree foam board and a 3d pen. I'll call it the Super Ultra Cheap Stick or SUC Stick. 🙂
David is a full scale aerobatic pilot that built an award winning Pitts Special . He sold it a few years ago.
Do you know if there is any kind of a build log on the web for his work on this build or for any of his other awesome builds?
Can a person get a direct line with Dave on his plane. Would like to Buy his design for commercial use..
wow, very beautyfull touch and go :)
Pretty well wing design sir, love it 👍
Waaaaaauuuuu ,,what a beatifull plane, perfect of this days.
Spectacular excelent
Saludos desde Buenos Aires Argentina .
👍👍👍👍👍
Truly Epic work and Epic flying! Love it!
Most aerobatic slow stick I've ever seen
Well done!
May I ask what is the length of the wings and fuselage and tail section Is there any way to have a steerable tail wheel ? Any Information I get would be Appreciated very much I love this plane its just what I have been looking for, for a few years now I really want to build one , and can you use a arrow shaft for support of the thin foam down the body ? Thank you Sir I really hope to hear back from you ....
I don’t know the measurements of the plane. Yes you could add a steerable tail wheel. That would help in the wind. The wingtips are cut down he took out some dihedral. He removed the incidence. The vertical stab and rudder is own design. I have not seen Dave in 10 years I don’t have any plans . Sorry
@@dcimagesaz thank you for your reply are you the one asking question ? (in the video ) I guess its build it, and see if it flies ..I am on my own ....lol....what else is new in my world....!.....i will take any building tips you can offer ...thanks.....what is the incidence ?
@@jlions72 yes that’s me , I’m trying to get all of the details of his modify slow stick.
Very nice plane...do you recall what the body is comming from or what material?
Thanks
That wass very nice. I am thinking about buying a slow stick as my first experience wtih planes. Momentarely i fly a tricopter. Very good filming.
this is very nice, shuld have been sold commercially
What a neat looking plane. That was a great flight, thanks for posting the video. Do you have any plans or drawings for it?
Great job.. you have a plans for sale?? ,wich is the NACA code?? thanks
Looks like what the Piper Cub would look like if it was a low-wing airplane
Здравствуйте! Извините пожалуйста. Я хотел спросить чертеж, план и инструкцию по сборке. Я не занимаюсь бизнесом, я старый авиамодельщик. Хотели понять как вам делать крыло? Который выглядит как обтянутый тканью? Помогите, пожалуйста. Я просто влюбился в этот самолет. Красиво и аккуратно сделано. Вы молодец!
А я похожый на джум купил там колеса тож хорошые
Думаю пеноплекс + усиленный скотч в самый раз
Which is the max. wind speed it can whitstand?
Very cool plane!
can I buy this plane? If yes where?
Waaaaaaait a minute- Is that SCOTTSDALE??? Cause it looks exactly like the SMF field at SCC!
Superb !
one of the best indeed :)
Awesome!!
Very Nice!
Almost sexy--- love the wheels!
I want it....
Why would someone want a slow stick to go faster? The object to me of having one is to sloooooooooooooowwwww fly.
+BushPilot444 that is what i was thinking, but it looks like he did not lose the slow ability at all