Your Awesome Video saved me over $300! The repair man wanted $405 to change out the dryer's gas valve after diagnosing the problem. I bought a brand new valve for $69 and with your step by step video guidance, I replaced it in less than an hour. Turned it on and Bingo, it works! Dryer heats up again!! Thank you for making it so easy!
GREAT video!! Love the step by step all explained clearly, well except the belt replacement, what a pain. Anyhow I was able to fix my dryer for the cost of the valve vs a $350+ bill for the same thing with various companies. Thanks for putting these videos online and keep up the GREAT work!
Does LG sell the coil for replacement? I ran a test on my LG gas dryer. There's no hot air from the first heater but there's heat from the 2nd heater so I would assume one of the coil must have gone bad.
@@appliancepartspros It's using the CGV22CK Gas Valve. I gave up looking for the coils so I just brought a cheap gas valve off ebay and see. Wish me luck. :-)
hi is it possible to just change the set of gas coils , or do i have to change the whole valve? my dryer starts and heats up just fine , but stops heating after 5 minutes.
Could need another part you have to ohm out other safety switches and fuses or it can also be a board if LG normally no heat door switch/high limit/ ignition rare/ or coils since 2 one to start 2nd to run/
Tendrás que acceder a la pieza, pero puedes probar las bobinas: Bobina principal: Pruebe el terminal 1 y el terminal 2, debería leer 1300-1500 ohmios. Luego pruebe la Terminal 1 y la Terminal 3; la lectura debería ser de 500 a 700 ohmios. Bobina secundaria: 1200-1400 ohmios
@@D4rkTaku I havent used yet, I broke the screw and had to buy new valve, I noticed that You have to use a very wide screw and plenty of force with low torque to turn it.
Is this the same as replacing the valve in a Samsung DV328AGW dryer? I'm hoping the Samsung is much easier, but my money says it's the same thing. What say you, kind sir?
While this may give you a general idea, we can't guarantee that the video will be a match for your Samsung dryer. That said, we do offer free technical advice and diagnosis, so if you run into trouble with your repair, you can give us a call and we can try to talk you through it. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Your Awesome Video saved me over $300! The repair man wanted $405 to change out the dryer's gas valve after diagnosing the problem. I bought a brand new valve for $69 and with your step by step video guidance, I replaced it in less than an hour. Turned it on and Bingo, it works! Dryer heats up again!! Thank you for making it so easy!
Glad the video helped you get the dryer fixed!
@@appliancepartspros So,no dope or thread sealer is to be used on any parts of the gas valve?
where's did you get a new one for that price?
GREAT video!!
Love the step by step all explained clearly, well except the belt replacement, what a pain. Anyhow I was able to fix my dryer for the cost of the valve vs a $350+ bill for the same thing with various companies. Thanks for putting these videos online and keep up the GREAT work!
Awesome, glad the video helped you out and you saved some money!
awesome video thank you so much you saved me tons of money!!
Glad the video helped you get the dryer fixed and you saved some money!
My top connector has two red and one pink (rather than white). Does double red still go toward the front of the dryer?
what else can I do to fix that problem
Great video. Can you service the valve or do you have to get a replacement valve?
B
Does LG sell the coil for replacement? I ran a test on my LG gas dryer. There's no hot air from the first heater but there's heat from the 2nd heater so I would assume one of the coil must have gone bad.
What is your model number?
@@appliancepartspros It's using the CGV22CK Gas Valve. I gave up looking for the coils so I just brought a cheap gas valve off ebay and see. Wish me luck. :-)
Good luck with your repair and let us know how it goes!
@@appliancepartspros I got the it working after changing the gas value cuz I can't just buy the coil. I am pretty sure it's the first coil.
hi is it possible to just change the set of gas coils , or do i have to change the whole valve? my dryer starts and heats up just fine , but stops heating after 5 minutes.
have the same issue and cant find coils to replace this. No part listed.
Could need another part you have to ohm out other safety switches and fuses or it can also be a board if LG normally no heat door switch/high limit/ ignition rare/ or coils since 2 one to start 2nd to run/
What’s the ohm range on the coils of this LG/Kenmore?
I tested mine and they were about 1800
Y como saber si ese es verdadero problema.... no vistes si valen o no las bobinas... tienes que poner todo el proceso...
Tendrás que acceder a la pieza, pero puedes probar las bobinas:
Bobina principal: Pruebe el terminal 1 y el terminal 2, debería leer 1300-1500 ohmios.
Luego pruebe la Terminal 1 y la Terminal 3; la lectura debería ser de 500 a 700 ohmios.
Bobina secundaria: 1200-1400 ohmios
How did you know the burner valve was faulty?
Ohm out the coils: OL BAD / 1-10 ohms good.
I have gas lp setup but I just can't turn the plastic screw to close it for this setup, anyone knows how to?
I have the same issue, are you using the dryer without turning the screw? I don't know what to do
@@D4rkTaku I havent used yet, I broke the screw and had to buy new valve, I noticed that You have to use a very wide screw and plenty of force with low torque to turn it.
mine has red and white wire to the bottom solenoid and double red with pink wire to the top solenoid. Is this ok ?
This valve may be used on models with different wiring harnesses, should be ok as long as you replace them in the same location.
Me too -- did you have double red toward the front still?
@@appliancepartspros Mine also had double red with pink -- does double red always go toward the front? I did not take a picture first, sadly
Guys?
i change the valve and don't turn on the fire i change the thermos and nothing i thing the problem is that the valve don't let the gas go
Is this the same as replacing the valve in a Samsung DV328AGW dryer? I'm hoping the Samsung is much easier, but my money says it's the same thing. What say you, kind sir?
While this may give you a general idea, we can't guarantee that the video will be a match for your Samsung dryer. That said, we do offer free technical advice and diagnosis, so if you run into trouble with your repair, you can give us a call and we can try to talk you through it. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Okay, so I have to disassemble the ENTIRE dryer to replace one simple part!!!! WT? Yep...........I'll just call a technician