In the coming months we plan on expanding our product line to cover AT boards for sure. And we will most likely be doing a BMS/Battery Wiring Video as well.
@@MBoardscogot the bms video made yet? Im converting a VERY heavy old at board with a truck starter size motor in to a slightly more user friendly version. Need some guidance on bms selection and the different ways you can wire them
How do you keep dirt and debris out of the pully system and motor? Also how fast can this build go? Is it better to run a motor on both the front and back? One more: How much noise does this build make?
Just subd great info was curious about an esc and remote setup together to make life easy which you covered. Think it's time to order some parts many thanks.
So I bought a Dreskar FT001 and although it should be viewed as a huge saftey concern it got me hooked on skateboarding without pedaling. My question is I need a new esc. I have been racking my brain tryin got figure out if these dual esc's on eBay wwould work for belt driven. The sellers are either sure...yeah or no way needs different firmware. So I come to you my help. Do you see any easy eBay solutions or is it complex and more difficult tha just switching out?
Dude I'm 6'3" 290-320 depending on the season. I plan to build my battery out of lipo cells (5*2s high drain) with a 10s bms ( cuz you guys don't do payment plans lol) anyway I want a belt drive but what size motor I've been looking at a 6374 170kv for the extra torque as my mass is like twice that of most e boarders I've seen. I have a duel caged 63mm mount in mind to add another motor down the road will this be enough to drag my big ass around town
Hello, i was curious as to what the internals of the remote are like? i would like to take them out and some how mount them on a DSLR Camera Cage. What would your thoughts be on this ? thanks ! - this is a project i have been thinking about for a while
Hey thanks for the vid it really helps. I am going to build an electric skateboard but I am 17 and cash isn't exactly my sweet spot so which parts do you think I should cut down on for a cheaper build? I am looking for a good all round build and my motor is likely to be a 6354 180KV.
Hey I have an interesting dilemma. I have a boosted board v2 but I lost the remote and charger. I can’t find these for a reasonable price on the internet, are there any other remotes or chargers that would work? Any help is extremely appreciated Thanks
Great video could you include the wheels in the links? Also maybe a bulk link to have all parts in basket on store then we can just pick a deck and compartment :)
We’re currently working on building kits so everything you’ll need can be purchased all at once. That way nothing is forgotten and a lot of the guess work is removed. Thanks for watching!
is a 7000 mah 14.8 volt 4cell lipo enough ? its connected to a 19000 kv brushless motor nuw the motor should be powerfull enough but i dont know alot about the battery... And the highest i can go is 6 cell lipo, but that seems a bit overkill
Are motors fairly water resistant on their own, or do they need an enclosure? Like running through a puddle of water or getting caught in the rain sorta water resistance.
Brushless Motors are relatively water resistant. Riding over some wet ground once in a while won’t hurt. Can’t recommend you riding in the rain or through a puddle but we have seen it done many many times.
Dude I’m glad I saw this - I’m probably your dads age lol but that doesn’t matter right. Growing up kids got into BMX or later mountain bikes or even roller blades - I stayed with my skateboards 🛹 and not that pressing on “goofy” isnt a drag but shit man ……. Building my own eboard would be dope. So with that HELP ME brother. I have a few sector 9’s and I love em’ looking at an Arbor but for now I want my sector 9 longboard to be electric - where do I start ? 15mph is probably good enough for me
I was just wondering if the sensor wire is necessary for the motors to spin, and I was wondering why the motor has a slot for six of the prongs in the sensor wire but there isn’t a plug for it on the ESC
Please answer this comment I want to , but I was wondering if you had like classes or some stuff like that , cause I'm 13 and want to make one instead of buying one
The remotes for the basic ESCs show how much battery you have left right on the remote. For Vesc users, a battery percentage indicator will be necessary.
Hey Mike, How much speed can I get out of a motor which is rated 170 KV and has an output of 2800 watts ?. Please Answer my Question, I would highly appreciate it.
You’ll need to follow the same parts list with a few differences. You’ll need 2 of the following instead of 1: Motor mounts Motors Vescs Pulley Systems Let us know if you have any other questions! We’re always here to help.
Belt size can be a bit tricky. It all depends on your motor pulley and wheel pulleys diameter as well as distance between the them. Any specific parts you need a belt for?
Buying parts from abroad is definitely difficult. I’d urge you to reach out to our support team. They may be able to come up with a solid kit for you and find the best shipping option.
This man needs more subs he’s rlly goood
Thanks for watching!
@@MBoardsco HEY THERE MAC WHAT VESC DO WE NEED TO USE TO CONTROLL 4 ELECTRIC MOTORS ??? THANK YOU
at what??
wow this vid is so clear and professional, I finally have clear answers to my E skateboard questions
I was wondering if you could make a video on how to charge the batteries using a 3 pin brick charger, rather than a balance charger :)
Could you make a video with a charging solution to this setup/and enclosure? Waiting for this kit! Awesome work!
Absolutely. Once we get our kits set up we will make a solid step by step guide on everything.
Great vid man,
1) would love to see some AT wheels in store
2) a video on what goes into making a 18650 battery and in depth BMS Wiring
In the coming months we plan on expanding our product line to cover AT boards for sure.
And we will most likely be doing a BMS/Battery Wiring Video as well.
@@MBoardscogot the bms video made yet?
Im converting a VERY heavy old at board with a truck starter size motor in to a slightly more user friendly version.
Need some guidance on bms selection and the different ways you can wire them
How do you keep dirt and debris out of the pully system and motor? Also how fast can this build go? Is it better to run a motor on both the front and back? One more: How much noise does this build make?
You are a HERO
Just perfectly detailed
Thanks,that what I have been looking for,the equipment, thanks
Are you charging through the esc or through a separate bms in the battery pack?
What bms and cells are you using?
Great video, I'm waiting for tutorial in which you will tell about vesc setups (from mboards)
Vesc setup will help a lot! 0/
Thanks! We're working on a lot of new content and will be covering that in a video soon.
Just subd great info was curious about an esc and remote setup together to make life easy which you covered. Think it's time to order some parts many thanks.
Have you tried jumping off of curbs how does the motor handle high impact?
Question here. I heard it is possible to run a dual esc with a single hub motor. How accurate is this?
Nice work! 😊
So I bought a Dreskar FT001 and although it should be viewed as a huge saftey concern it got me hooked on skateboarding without pedaling. My question is I need a new esc. I have been racking my brain tryin got figure out if these dual esc's on eBay wwould work for belt driven. The sellers are either sure...yeah or no way needs different firmware. So I come to you my help. Do you see any easy eBay solutions or is it complex and more difficult tha just switching out?
Hello Mr. Beard. The link under "Full Kit of Items Mentioned Available Here:" doesn't work.
What is your opinion about hub motors? Where the motor is inside of the wheel..
Dude I'm 6'3" 290-320 depending on the season. I plan to build my battery out of lipo cells (5*2s high drain) with a 10s bms ( cuz you guys don't do payment plans lol) anyway I want a belt drive but what size motor I've been looking at a 6374 170kv for the extra torque as my mass is like twice that of most e boarders I've seen. I have a duel caged 63mm mount in mind to add another motor down the road will this be enough to drag my big ass around town
Hello, i was curious as to what the internals of the remote are like? i would like to take them out and some how mount them on a DSLR Camera Cage. What would your thoughts be on this ? thanks ! - this is a project i have been thinking about for a while
Can u tell me battery and motor specs best to use in budget
Hey thanks for the vid it really helps. I am going to build an electric skateboard but I am 17 and cash isn't exactly my sweet spot so which parts do you think I should cut down on for a cheaper build? I am looking for a good all round build and my motor is likely to be a 6354 180KV.
How do you program he ESC for a 2 motor configuration or even 4 motor. What program software do you use and how do you use it?
Will you ship internationally
Yes we ship worldwide 😎
Hey I have an interesting dilemma. I have a boosted board v2 but I lost the remote and charger. I can’t find these for a reasonable price on the internet, are there any other remotes or chargers that would work?
Any help is extremely appreciated
Thanks
What amperage and voltage is needed to propel a person? What is the rating on the battery in your hand in this video?
Thank you for your help!
36V 6000mAh 216Wh, thats everything i could find about the battery
Hey man what do u suggest to make $300 skateboard?
Could you make a video about how to pit MBS off-road wheels on your diy boosted board
Hey dudes, can I buy a remote that will work with an evolve gen1?
Great video could you include the wheels in the links? Also maybe a bulk link to have all parts in basket on store then we can just pick a deck and compartment :)
We’re currently working on building kits so everything you’ll need can be purchased all at once. That way nothing is forgotten and a lot of the guess work is removed.
Thanks for watching!
@@MBoardsco keep up the good work hope shipment to UK isn't to expensive
Can we get a full tutorial?
is a 7000 mah 14.8 volt 4cell lipo enough ? its connected to a 19000 kv brushless motor nuw the motor should be powerfull enough but i dont know alot about the battery... And the highest i can go is 6 cell lipo, but that seems a bit overkill
well there are reactions here 2 to 4 years old never responded, ill just figure it out myself i guess
Are motors fairly water resistant on their own, or do they need an enclosure? Like running through a puddle of water or getting caught in the rain sorta water resistance.
Brushless Motors are relatively water resistant. Riding over some wet ground once in a while won’t hurt. Can’t recommend you riding in the rain or through a puddle but we have seen it done many many times.
Ya that would be super nice I'm having trouble with wiring my bms
hiya
i was looking at the all in one kit and i was wondering why you need riser pads?
Riser pads help give your board extra clearance. Many times the motors sit too close to the bottom of the deck. They also help with road vibrations.
Dude I’m glad I saw this - I’m probably your dads age lol but that doesn’t matter right. Growing up kids got into BMX or later mountain bikes or even roller blades - I stayed with my skateboards 🛹 and not that pressing on “goofy” isnt a drag but shit man ……. Building my own eboard would be dope. So with that HELP ME brother. I have a few sector 9’s and I love em’ looking at an Arbor but for now I want my sector 9 longboard to be electric - where do I start ? 15mph is probably good enough for me
I was just wondering if the sensor wire is necessary for the motors to spin, and I was wondering why the motor has a slot for six of the prongs in the sensor wire but there isn’t a plug for it on the ESC
The sensor wires are not necessary. Depending on your motor and esc combo the sensors might not be compatible.
Please answer this comment I want to , but I was wondering if you had like classes or some stuff like that , cause I'm 13 and want to make one instead of buying one
Would love to offer classes in the future! Have to figure out how we’d do something like that wether it be online or in person.
Open to ideas!
What do you want direct drive?
Does the controller tell you how much battery life you have left, or do i have to but the battery display??
The remotes for the basic ESCs show how much battery you have left right on the remote.
For Vesc users, a battery percentage indicator will be necessary.
hello.. how do you charge it?
Can a boosted battery work with any esc ?
Is it possible to rotate the motor in both directions with ESC FSESC 4.12 50A Based on VESC® 4.12?
Yes, you can program the motor to go forward and reverse.
@@MBoardsco thank you so much
How much time dose ist take to send the 90mm hub Motor to Germany
All of the shipping costs and times are shown at check out 👍🏻
What mm riser pad do you need
Hey Mike, How much speed can I get out of a motor which is rated 170 KV and has an output of 2800 watts ?.
Please Answer my Question, I would highly appreciate it.
Please Reply Respected Mike Beard
It depends on the size of the wheels, voltage of the battery, and gearing ratio.
what about 90 mm wheels , 10 S battery ; Then how much speed can I get out of a motor rated 170 KV with a power output of 2800 watts@@MBoardsco
hi we have many kind of esc vx do you want to try
How long is the minimum board length for these parts?
depends on wich parts u are using...
but as long as you dont use like a penny board or something super small, just a regular size skateboard you should be fine
If I want to make it a dual motor, what parts would I need for that?
You’ll need to follow the same parts list with a few differences.
You’ll need 2 of the following instead of 1:
Motor mounts
Motors
Vescs
Pulley Systems
Let us know if you have any other questions! We’re always here to help.
How far and fast would you go on a 10s3p 8Ah 42v battery?
Although number of factors like rider weight, wheel size, gearing ratio, etc effect top speed, 10s batteries get you speeds of around 25mph.
Esk8 101. Good video
Thanks for watching!
Can you provide....ROHS. Ru 94U-D. E253642Y-D circuit board...thx..
How do you charge the battery
There is a charge port attached to the battery.
What is the fourth wire?
HI, could you reply if I ask you a question?
Yes 👍🏻
ok thx , could these shipped to Qatar I really want this
We ship world wide 👍🏻
@@MBoardsco ok, thx
Is the battery rechargeable?
Yes 👍🏻 Would be very short lived fun if it wasn’t 😎
Let us know if you have any other questions!
how to recharge the battery
How do you charge the board?
A simple charge port would be added to the outside of what ever enclosure you go with.
@@MBoardsco So your batteries have a bms then.
Are there brakes?
Yes 👍🏻
how do you pick the belt size?
Belt size can be a bit tricky. It all depends on your motor pulley and wheel pulleys diameter as well as distance between the them. Any specific parts you need a belt for?
@@MBoardsco I ended up getting the 10mm 16t pulley and the 66t pulley so I ordered the 365 mm belt
Love the video but your links need updated
Yes they probably do! This video is quite old! We’ll comb through these and update asap!
@@MBoardsco yes , because there is always someone new to building like me . 😃
@alttransport3445 If you have any questions shoot us a message on Instagram @mboardsco
Or shoot us an email support@mboards.co :)
Not all of the links work
This video is quite old now. I’m sure they need to be updated. Will update asap!
@@MBoardsco ❤😊
Are e skateboards 1 wheel drive because that sounds dangerous
Some have only 1 motor, but I wouldn’t call it dangerous
just sud these is interesting
you only need ONEWHEEL to have the best esk8
i want to build my own DIY board but the parts are soo expensive here in the Philippines
Buying parts from abroad is definitely difficult. I’d urge you to reach out to our support team. They may be able to come up with a solid kit for you and find the best shipping option.