Awesome! Im so glad if was helpful to you! Ive finally got a week of print time on my v3, Im going to make an opinion video on it soon and show off all my biggest prints ive done on it so far!
COLON (:) , not semi-colon (;) used for defining a PORT other than the standard web of :80 .. but great info! Thank you! that's why I couldn't get ORCA to see the printer - it failed to auto discover but when I manually added port 4408 it allowed me remote connection.
Yes!!n The new orca K1C profiles work great! If you have any issues using them to print just make sure you completely uninstall orca slicer and then reinstall the correct 2.0.0 or later version (2.0.0 as of 4/21/24)
Thank you for the compliment and thanks for taking the time to comment! :D Simplify 3d slicer is definitely a unique one you don't hear as often as the others! Can I ask what makes you choose that slicer?
me too, i think you need to root it and install the full ver of klipper or something like that but i dont know because i dont want to void the warranty if something goes wrong when i root
I am trying to follow this on my Ender 3 v3 KE, but I think I have missed a step. Do I need Fluid installed already? the suffix 4408 doesn't work for me and ORCA won't connect via the standard IP address. Complete noob at this, any help would be great, thanks!
Hello! I dont think you missed a step, atleast I didnt have to do anything other than use the :4408 When you type your IP in your URL without the suffix, do you get sent to the Creality proxy for your printer??
Sorry, I didn't explain it well. My Ender 3v3 core xz works fine in Creality Print. In Octoprint, following your video, I can connect via wifi to it and I get the Fluidd interface fine, but camera won't work (I don't get a window for video). Camera is a Creality Nebula, connected directly to the printer, I'm not using raspberry nor octoprint.
Reds, I'm afraid this message was lost, here it is again in case you are able to help: Sorry, I didn't explain it well. My Ender 3v3 core xz works fine in Creality Print. In Octoprint, following your video, I can connect via wifi to it and I get the Fluidd interface fine, but camera won't work (I don't get a window for video). Camera is a Creality Nebula, connected directly to the printer, I'm not using raspberry nor octoprint.
Hey buddy, Im super sorry I missed your other comment. Would you want to shoot me an email my email is Reds3dPrintingND@gmail.com Id like to try and help you get that figured out, unless you have discord possibly??
I use the new nebula camera! I plan on making a video about it I just wanted to have a week or two of use with it first. 9/10 quality. You can set it up to do super smooth time lapses too. The quality is top notch. I did not expect such good quality for that price but it blew me away
Hello! I started looking for information about the V3 and came across a wave of negative reviews about it (but the strange thing is that everyone who said that the V3 is bad doesn't have it), I'm interested in your opinion, is it worth the money? How long have you had it? In fact, I ordered it for myself with the hope that I would simply put it together and use it without a lot of modifications. Did I make a mistake with the choice in your opinion?
You absolutely did not make a mistake. You are going to love your v3 I think. This printer has the spedy K1 hotend assembly basically with the core xz kinematic. Its a really impressive printer. I know the rivalry is almost like Minnesota vs green bay/ xbox vs play station. Creality isnt copying bambu by any means, I don't think Creality should have to reinvent the wheel. I am so impressed with the Craftsmanship and hard work they put into this one. You can really tell they put a lot of thought into it. The quality is so impressive for the speed it prints at. Its like having 5 basic enders. I printed this FAB 365 easter bunny bank just yesturday. The website quoted the time at 16 and a half hours. I printed it out on my v3 in just 4 hours. This sort of quality and speed was unheard of to be sold straight from a manufacturer less than a year ago. Its crazy how quickly things improved
@@olko_batkovych Thank you very much, that means so much to me! I am very critical of myself. I just hope to keep improving! :) Thank you for the positivity! It is very motivating to me!
Do they not have profiles available already for the v3 plus?? You should just check out orca slicer if they do not, Im almost for sure orca does and orca is essentially bambu slicer just more of the voron version
@@Reds3DPrinting They have a profile actually, so that's probably not the issue. The thing is when I try to click print or export g code, this error message pops up: Failed processing of the filename_format template. Parsing error at line 1: Not a variable name {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode ^
I will say I haven’t been using my 3-D printer since my last video as the nozzle clogged and after unclogging it my printers hot end broke fully it make a crackling sound every time I tryed to print with every line of filament haveing burnt bubbles in them so after waiting a MONTH of back and forth emailing with Creality with them saying there out of stock and they also kept repeating messages and it was a mess but finally they shipped out my part and today it’s gonna be here but good to know I can use orca again as it was having issues before hand
@@Angelo-24. Im sooo happy your part is finally going to be here today! I look forward to some more videos from you now!! sorry they gave you the trouble they did, I really hope they sent you the right part now!
They did everything is fine all I needed to do was to revert the new update because turns out the new update is giving issues with the nozzle, dragging on the bed nachos on the ender but also on the K-1 so after reverting it, and finally getting it to work everything has been fine
Yes, in theory itll work for any print as long as you know what settings you would like to adjust. Ive been meaning to make an update video, orca updated to 2.1.1 and if you update to that version there are already presets for the v3 plus on there I believe
Just a reminder if you don't have captions turned on - Dont forget to save your printer profile at 6:40 !
This is exactly what I’ve been looking to do since I got the V3. Thank you for putting this video together. Really well done and informative.
Awesome! Im so glad if was helpful to you!
Ive finally got a week of print time on my v3, Im going to make an opinion video on it soon and show off all my biggest prints ive done on it so far!
You're a god to me. I just got my ender 3 v3 and almost started crying until reddit brought me to you. I am grateful. :)
If you need any sort of help at all feel free to reach out to me Dabble!
Thank you, I was tired of using creality print.
Im glad I could help! :D
COLON (:) , not semi-colon (;) used for defining a PORT other than the standard web of :80 .. but great info! Thank you! that's why I couldn't get ORCA to see the printer - it failed to auto discover but when I manually added port 4408 it allowed me remote connection.
- I have the Ender-3 V3 PLUS, so nothing is avail for that, but I was able to install the Creailty_Print v5 to copy over settings.
Thank you for the video. Can I use the K1C profile from OrcaSlicer? I tried this on my Ender-3 V3 and it works fine.
Yes!!n The new orca K1C profiles work great! If you have any issues using them to print just make sure you completely uninstall orca slicer and then reinstall the correct 2.0.0 or later version (2.0.0 as of 4/21/24)
@@Reds3DPrinting Thank you, I appreciate your work.
Very nice vid man I mainly use simplify 3d and orca slicer
Thank you for the compliment and thanks for taking the time to comment! :D Simplify 3d slicer is definitely a unique one you don't hear as often as the others! Can I ask what makes you choose that slicer?
@@Reds3DPrinting because I have a delta printer and it works very well with using delta printers
THANK YOU SO MUCH BROTHER, YOU HELP ME A LOT.
Im so glad!
@@Reds3DPrinting New subscriber
Thank you for this video it helped me use orca slicer with my v3 plus 🤩
I have a cr10se printer. Do you know would it work? And will I change all settings or just move settings? Can u help plz
:4408 not working for me (ender 3 v3 ke)
me too, i think you need to root it and install the full ver of klipper or something like that but i dont know because i dont want to void the warranty if something goes wrong when i root
Can you do this for prusa slicer please.🙏🙏🙏🙏👍
I am trying to follow this on my Ender 3 v3 KE, but I think I have missed a step. Do I need Fluid installed already? the suffix 4408 doesn't work for me and ORCA won't connect via the standard IP address. Complete noob at this, any help would be great, thanks!
Hello!
I dont think you missed a step, atleast I didnt have to do anything other than use the :4408
When you type your IP in your URL without the suffix, do you get sent to the Creality proxy for your printer??
@@Reds3DPrinting Yes, using the just the IP takes me to the Creality proxy, but that alone doesn't work in Orca.
@kieranhead4568 had you found any solution to this? I got a KE too, and I had the same problem as you.
@@alexparada607 no, I never got it sorted. I've just been using a USB drive and doing it manually.
Awesome, just a question, how do I get my Nebula camera to stream in fluidd? It works great with Creality but I must be missng something here. Thanks!
are you trying to get dual cameras to work or just your nebula cam in general??
@@Reds3DPrinting No dual cameras Reds, just my Nebula camera.
Sorry, I didn't explain it well. My Ender 3v3 core xz works fine in Creality Print. In Octoprint, following your video, I can connect via wifi to it and I get the Fluidd interface fine, but camera won't work (I don't get a window for video). Camera is a Creality Nebula, connected directly to the printer, I'm not using raspberry nor octoprint.
Reds, I'm afraid this message was lost, here it is again in case you are able to help: Sorry, I didn't explain it well. My Ender 3v3 core xz works fine in Creality Print. In Octoprint, following your video, I can connect via wifi to it and I get the Fluidd interface fine, but camera won't work (I don't get a window for video). Camera is a Creality Nebula, connected directly to the printer, I'm not using raspberry nor octoprint.
Hey buddy, Im super sorry I missed your other comment. Would you want to shoot me an email my email is Reds3dPrintingND@gmail.com
Id like to try and help you get that figured out, unless you have discord possibly??
what camera do you use for your printer?
I use the new nebula camera!
I plan on making a video about it I just wanted to have a week or two of use with it first.
9/10 quality. You can set it up to do super smooth time lapses too.
The quality is top notch. I did not expect such good quality for that price but it blew me away
@@Reds3DPrinting looking forward to the video!
Hello! I started looking for information about the V3 and came across a wave of negative reviews about it (but the strange thing is that everyone who said that the V3 is bad doesn't have it), I'm interested in your opinion, is it worth the money? How long have you had it? In fact, I ordered it for myself with the hope that I would simply put it together and use it without a lot of modifications. Did I make a mistake with the choice in your opinion?
You absolutely did not make a mistake.
You are going to love your v3 I think.
This printer has the spedy K1 hotend assembly basically with the core xz kinematic. Its a really impressive printer.
I know the rivalry is almost like Minnesota vs green bay/ xbox vs play station. Creality isnt copying bambu by any means, I don't think Creality should have to reinvent the wheel. I am so impressed with the Craftsmanship and hard work they put into this one. You can really tell they put a lot of thought into it. The quality is so impressive for the speed it prints at. Its like having 5 basic enders.
I printed this FAB 365 easter bunny bank just yesturday. The website quoted the time at 16 and a half hours. I printed it out on my v3 in just 4 hours.
This sort of quality and speed was unheard of to be sold straight from a manufacturer less than a year ago. Its crazy how quickly things improved
@@Reds3DPrinting thanks!you doing good job in your video's!
@@olko_batkovych Thank you very much, that means so much to me! I am very critical of myself. I just hope to keep improving! :) Thank you for the positivity! It is very motivating to me!
is there anyway to get bambu studios to print on my ender 3v3 plus
Do they not have profiles available already for the v3 plus?? You should just check out orca slicer if they do not, Im almost for sure orca does and orca is essentially bambu slicer just more of the voron version
@@Reds3DPrinting They have a profile actually, so that's probably not the issue. The thing is when I try to click print or export g code, this error message pops up:
Failed processing of the filename_format template.
Parsing error at line 1: Not a variable name
{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
^
Nice video red!
I will say I haven’t been using my 3-D printer since my last video as the nozzle clogged and after unclogging it my printers hot end broke fully it make a crackling sound every time I tryed to print with every line of filament haveing burnt bubbles in them so after waiting a MONTH of back and forth emailing with Creality with them saying there out of stock and they also kept repeating messages and it was a mess but finally they shipped out my part and today it’s gonna be here but good to know I can use orca again as it was having issues before hand
@@Angelo-24. Im sooo happy your part is finally going to be here today! I look forward to some more videos from you now!!
sorry they gave you the trouble they did, I really hope they sent you the right part now!
They did everything is fine all I needed to do was to revert the new update because turns out the new update is giving issues with the nozzle, dragging on the bed nachos on the ender but also on the K-1 so after reverting it, and finally getting it to work everything has been fine
@@Angelo-24. How did you revert?? Im worried im running that firmware on my k1c and its only a matter of time for it to start failing
Would this work for the ender 3 v3 plus?
Yes, in theory itll work for any print as long as you know what settings you would like to adjust. Ive been meaning to make an update video, orca updated to 2.1.1 and if you update to that version there are already presets for the v3 plus on there I believe
Red can you make a community post for the sonic pad😊
Bet!
@@Reds3DPrinting thanks
Could I hire you for a brief phone consultation/ zoom call?
Hey Andrew, I sent you an email back!
эть два типа людей кто печатает на принтерах и кто занимаеться анонизмом с ними ))))