dear god that thing is bad ass at the start of the video i was like eh it seems like a lot of pre fab peices to make it work but boy was i wrong. the work you guys did is crazy good with the attention to detail off the charts man. one day when i make all the money im going to have to have you guys work on my 3rd gen taco cause i was mesmerized the whole video and watched it about 3 times to write down a list of parts used for my future work on my taco.
Sick build. Well thought out with off the shelf parts that you've tweaked to you liking. Should hit up Terra Crew for a video collab. They're the main guys doing socal prerunner content.
Very tasty taco! Seriously, very nice build. It would be very cool to see a detailed video of the front hub conversion from CV's to U-joints and locking hubs. Also, did you install a front diff lock or limited slip? Thanks for sharing! 👍👍👍👍👍👍👍👍👍👍
Wow , someone who actually built it right . Stock spindle and stock steering rack ? lol. Tripod inner “cv”. Ya sure you got “LT” sweet truck. Makes other”LT”builds looks like a spacer lift kit . Well done .
Beautiful! I hope my quicksand access cab is this nice one day!!! Question does that rear with the 35 spline shafts still use the factory speed sensors at the wheel bearings? If not how did you delete it???
@@yufengluo3937 oh wow! i thought it would throw off the trans shift points and what not. Thats really good to know! Keep up the great content! Im watching your suspension tune video now!!!!
Can you go more indepth with the Porsche 934 CV choice? It seems like an odd choice as Porsche CV's use the bolt torque to maintain connection which while being easy to replace is usually weaker than most spline based CV designs, also I found most Porsche CV's have very limited travel making it easy to cause them to eject the bearing balls into the boot. Old 944/911 guy here.
What do you guys have for supports around the vehicle just went threw my second radiator and can’t find anybody doing supports I guess I’m the only one that actually drive the damn thing offroad lol jk but if you or anyone has done anything for that please let me know
You said your coilovers help you retain 4 wheel drive, what do you mean by that? Great build but way to complex. If you have access to a shop with a lift and you can fabricate puts you at a whole other level then almost everyone! I want my own shop so badly!
@@elli003 LT front is like 15K, LT rear is like 10K(Not counting the axle swap), The fiberglass and bumpers like 3K, Supercharger 7K. They kept the budget lower since they are the shop that did the work
Love pre-runner builds! Better than rock crawlers imo!
@Nphekt what’s the utilities for a prerunner? I just never understood the hate for pre.
The level of detail and thought that went into this was impressive
One of the best builds ever described. The detail is amazing. You guys should be proud! Thanks for sharing.
This is one of the nicest, if not THE nicest 3rd gen Tacomas out there. Crazy to see the full cut out fenderwells.
Awesome. A video on the front bumper construction would be appreciated!
Coming from another 3rd gen Tacoma owner, this is an incredible build!
Add a Seibon carbon hood and get the white fenders color matched and this thing is perfect. Sickest 3rd gen Tacoma I’ve seen yet.
That bed rack looks very similar to dirt kings.
such a unique build man!! the time and effort definitely shows🔥
dear god that thing is bad ass at the start of the video i was like eh it seems like a lot of pre fab peices to make it work but boy was i wrong. the work you guys did is crazy good with the attention to detail off the charts man. one day when i make all the money im going to have to have you guys work on my 3rd gen taco cause i was mesmerized the whole video and watched it about 3 times to write down a list of parts used for my future work on my taco.
Sick build. Well thought out with off the shelf parts that you've tweaked to you liking. Should hit up Terra Crew for a video collab. They're the main guys doing socal prerunner content.
Now that's an absolutely amazing build it look's like y'all thought of everything definitely a wicked build
love the attention to detail. now thats a shop you want working on your build. shut up and take my money!
Definitely insane detail. Excellent work. Checked for more videos but will subscribe. Cant wait to see this thing driving. Cheers
Thanks man for a very detailed vlog.
Great build! Gave me a lot of inspiration for my Tacoma.
Excellent build, would love to see it in person.
Nice work. I like the details put into this build.
Wow!! Great job, well executed build.
Sick build homie! Ill be sure to honk if I see you on the road
Yooo im here from your IG post, love the giveaway idea hope to see more great content in the future ❤️❤️❤️❤️
W vid came from the ls3 ig giveaway post let’s get dat engine boss
Im here hopefully be a winner for LS3
Love it! Awesome build and its nice and clean😊
Good market for this diff mounts if you started producing them, pretty common thing to break on the rock crawling side.
Nice job on the build.
Fantastic build
How does this only have 40 views
now it has 40k
its a great build. Inspiring...
Very tasty taco! Seriously, very nice build. It would be very cool to see a detailed video of the front hub conversion from CV's to U-joints and locking hubs. Also, did you install a front diff lock or limited slip? Thanks for sharing! 👍👍👍👍👍👍👍👍👍👍
Color match it all would look dope
This thing is sick
Beautiful build!
that obs in the background looks great
I’m ready to win that ls3 crate motor lol I already have a car to put it in gonna be sema worthy
Wow , someone who actually built it right . Stock spindle and stock steering rack ? lol. Tripod inner “cv”. Ya sure you got “LT”
sweet truck. Makes other”LT”builds looks like a spacer lift kit . Well done .
Here for the ls
Beautiful truck. Any updates on it?
Daaaamn sick!!!!!
Beautiful! I hope my quicksand access cab is this nice one day!!! Question does that rear with the 35 spline shafts still use the factory speed sensors at the wheel bearings? If not how did you delete it???
Thank you! The factory wheel speed sensors have been deleted. The truck actually runs fine without them! Just no speed display.
@@yufengluo3937 oh wow! i thought it would throw off the trans shift points and what not. Thats really good to know! Keep up the great content! Im watching your suspension tune video now!!!!
I got a serious question was it a long bed? Or regular bed
Sick truck! Do you guys make that style bumper for stock 2020 Tacoma. Looks really nice and clean!
Thank you! No we don’t :( This bumper was a one-off.
Where can I find more pictures of this truck
Where can I see it in action???
Cool build, been looking for a prerunner bumper like that. Do you guys at Y fab and sell it. I have 2017 trd 4x4
Thank you! This bumper was a one-off.
Let's see it go!
On the rack did you guys just do off-set bushing? For the tundra rack.
The headlights. Where are they from ?
Hope I win the LS3
Hopefully I can win your motor give away
Can you go more indepth with the Porsche 934 CV choice? It seems like an odd choice as Porsche CV's use the bolt torque to maintain connection which while being easy to replace is usually weaker than most spline based CV designs, also I found most Porsche CV's have very limited travel making it easy to cause them to eject the bearing balls into the boot.
Old 944/911 guy here.
These are the CVs that Solo Motorsports provides. The Porsche CVs are used extensively in the offroad world.
Hi! The Porsche CV’s are actually very strong. We also use them in my 1300HP drift car!
What do you guys have for supports around the vehicle just went threw my second radiator and can’t find anybody doing supports I guess I’m the only one that actually drive the damn thing offroad lol jk but if you or anyone has done anything for that please let me know
Sick👌🏾
How much wider are fenders and bedsides 4 inch or 6inch?
Do you sale the flares fender I'm want that's fender for my 2019 Tacoma
We don’t sell them but there are a few companies that make them!
Where can I get those pre-runner bumpers
any fab shop can make one
Is this a 5 or 6 foot bed??
You said your coilovers help you retain 4 wheel drive, what do you mean by that?
Great build but way to complex. If you have access to a shop with a lift and you can fabricate puts you at a whole other level then almost everyone! I want my own shop so badly!
🔥
What is the fenders size?
That bumper ain’t bumping nothing lol
Get rid of the leaf springs
So that's about a 300K Taco, right ?
If it was 300K it would be engine swapped, fully caged and 4 linked. Maybe center mount or beamed if they didnt like the extended A arm setup.
@@LukePRTR What would you guess this TACO costs then ?
@@elli003 100K ish
@@elli003 LT front is like 15K, LT rear is like 10K(Not counting the axle swap), The fiberglass and bumpers like 3K, Supercharger 7K. They kept the budget lower since they are the shop that did the work
@@LukePRTR Are you a builder ?
Pick me please
I subscribed to you from IG 😏🙏🏼
i want a prerunner/offroading build but im kinda dumb wh3n it comes to this stuff🥲
Super clean build but seems like a lot of pricey over kill for a V6 truck with leafs