Karcher Power washer Surface Cleaner Repair: nozzle blockage, clearing a jet: pressure washer fix
HTML-код
- Опубликовано: 17 сен 2024
- Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.
Great tutorial, just fixed my patio cleaner which is now working perfectly again. 👍
Glad it helped
Thanks mate. I have the Karcher K4 and this absolutely solved it for me. Was pulsing so I took the centre bolt out thinking something was wrong with that and then when I put it back in, water was coming out of the middle. So I took the two jets off on the sides and they were bunged up and full of muck. Once I took these off, cleaned them up and put back on I tightened the centre bolt up (don't overtighten it) and nearly took my hand off with full power 🙌 saved me buying a new one and a happy wife as the back garden was cleaned up 👍
Thanks to your video my patio cleaner is working again 🙌🙌
good stuff!
Thanks mate, super quick and easy to follow, got be back up and running in no time
Glad it helped
Thank you sir. Fixed my problem
Thank you, Bootsowen. All I needed to do was place a wrench on the bolt, and it literally popped free and started spinning freely. Back to work!
Good work! Keep the dream alive!
Great thanks, I just fixed ours xsue
Super
Thank you.
The trick is not to over tighten the central spindle nut there needs to be a tiny gap between the jet arms and the white washers. If you got full jet pressure from the heads I recommend you to loosen the nut a bit then try it out. Just fixed mine which was not spinning.
Cheers. Must of had some grit in mine 👍🏼
Thanks for this BootsOwen - your tips worked for me!!
Thanks, did the trick.
Thnks it works!!!
Thank you mate you saved me few quid 💷
thanks. Got mine out yesterday and it wouldn't spin. I didn't work out how to get the nozzles off so this was useful. What i did was take off the centre screw and put some grease on it then it started spinning but still wasn't great. I notice yours was pulsing, i'm not sure it's supposed to do that?
Yes. The pump unit in my setup is not working correctly
Pulsing due to over pressure build up because water not coming out enough
In the video it started rotating after you cleaned the nozzles a little better. But was there any other problem? I mean what other corrections you made?
I mean. it seems you have done nothing to correct the problem... and it corrected itself?
My recollection is that I removed a tiny piece of grit from the nozzle. In many cases taking something apart and cleaning it will repair it.
The washer should run continuously. I have the k2
Yes. But as others have mentioned it is not running right. But it works fine.
Conceptually your video was good although you didn't really fix the pulsing problem, and you should have washed the jets out when you 1st had them off, personally id have blown through the rotator arm by connecting it up to the jet washer to get rid of any dirty within it
Power washer not pressuring most prob a cracked washer that’s inside motor section should black plastic or you have air running through your taps
There could be all sorts wrong with that power washer. I have tried to fix them in another video.
Well that was a waste of 8:05
have the same problem they dropped the extention tube in the sand 🤬🤬
Your Kärcher is damaged. Cant you hear this?
It’s beyond damaged but it still throws water!
Somethings not right with that power washer. Shouldn’t be making that noise. Should be constant
All of my power washers are dickered!
Ohmygod! You said the muck in the nozzle was "probably dog poo" and then you put your mouth up to it #vomit!!!
But you didn’t fix it...
How's that?
It was still pulsating however I think the part was fixed, just the actual washer that sounded knackered!!