Shark V2945Z - 2-Speed Cordless Vacuum - Disassemble, Clean, Reassemble - with User Manual Link

Поделиться
HTML-код
  • Опубликовано: 21 окт 2024

Комментарии • 81

  • @mobar12
    @mobar12 2 года назад +12

    This is one of the very best video demonstrations of anything. So precise and informative. I almost threw away my Shark vac, not realizing I could simply replace the battery. Thanks so much for saving me money and keeping this useful tool working another 7 years.

  • @marlonhernandez8411
    @marlonhernandez8411 2 месяца назад +1

    Wow,this lady knows more about assembling and disassembling than most guys nowadays

  • @Jean78578
    @Jean78578  6 лет назад +1

    Link to Shark V2945Z Owner's Guide:
    drive.google.com/open?id=12as2pGw-lyZlhKioI00Yz4K4wFX9ptct

  • @charlottewright8225
    @charlottewright8225 4 года назад +5

    I have had my shark for several years and love it.

  • @karensheehan5582
    @karensheehan5582 5 лет назад +4

    Thank you for this video. Our handle broke and thanks to you I took it apart glued the handle back together and reassembled the sweeper. The first time I did not have the plug in in the right position. Took it apart again and double-checked it before I put all the screws in. Thank you again, it works like a charm.

  • @dick8649
    @dick8649 2 года назад +7

    Excellent well paced, informative great video and audio. This how a help video should be done. Very professional. Thanks, Richard

  • @cf2796
    @cf2796 Год назад +2

    Yes you R a tech angel!! I am so glad I found your vid.
    My shark ( V2950) would only run for 10 secs before quitting.
    I had even just bought a new battery. Was ready to throw out this vac.
    Then after your excellent instructions on how to take out the roller brush and clean the ends it now works.
    The manual with its illustrations are not helpful .. AT ALL. But you are a life saver or should i say VACUUM saver !! ha ha
    I should have known to take it out and inspect the ends.
    That's what the prob was. There was old hair wrapped around the end thingy inside .
    You saved me soooo much money. Thanks a bunch!

  • @janmishkin
    @janmishkin Год назад +1

    When the brush was off, that would have been a good time to clean the housing. Great video!

  • @ellenh278
    @ellenh278 3 года назад +3

    Great! Informative. Thorough. no nonsense. Tired of videos of guys telling you the problem is a sock clogging the works. Uh . no.
    New sub.

  • @barrya7652
    @barrya7652 8 месяцев назад +1

    This is an excellent video. I followed along and found the instructions were perfect. Several hints that would be easy to leave out or overlook were included. Thank you!

    • @Jean78578
      @Jean78578  8 месяцев назад +1

      Glad it helped!

  • @marylandmcmillian2005
    @marylandmcmillian2005 2 месяца назад +1

    Thank you for this video, I was having trouble getting the brush back into place, and the sound it was making let me know as well. Thanks to you, I was able to see what I was doing wrong and saved me money cause I was thinking I would have to replace it. 🥰😊

    • @Jean78578
      @Jean78578  2 месяца назад +1

      Glad it helped!

  • @22Kyme
    @22Kyme 4 года назад +4

    Thanks for sharing this. Now I know how to take care of the sweeper.

  • @brianswann1949
    @brianswann1949 3 года назад +2

    Thank you for the tips. I couldn't figure out how to get the brush out. Solved thanks to you. :)

  • @carterperry1529
    @carterperry1529 5 лет назад +7

    My aunt has this vacuum and it is a great vacuum

  • @rosybarrera6472
    @rosybarrera6472 2 года назад +2

    . I was looking how to empty Its tricky I founded in you 🎥Thank u

  • @kathycooley4953
    @kathycooley4953 2 года назад +4

    Thanks for such a Wonderful demonstration and detailed explanation of the features and functionality of this sweeper.
    The deal of $1.00 is beyond Awesome; however, I also think the price (esp. sale) at store is still worth the price. I love mine. You are a Great Teacher! Thanks so much, as I am a Visual Learner, you have given me a full understanding!

  • @acnesupplementscritic
    @acnesupplementscritic 4 года назад +7

    Thanks! Couldn’t figure out how to empty it.

  • @selenah2919
    @selenah2919 3 года назад +4

    Thank you I watch your video I fix the vacuum thank you you’re so smart make more videos about this vacuum God bless and once again thank you it’s working😎

  • @AnnParker-r8c
    @AnnParker-r8c 3 месяца назад +1

    Very good demonstration thank Ann🏴󠁧󠁢󠁳󠁣󠁴󠁿

  • @shadrach6299
    @shadrach6299 3 года назад +3

    It is a great little vac

  • @pixiedust5278
    @pixiedust5278 11 месяцев назад +1

    Thank you very much for this video, I have almost the same vacuum it's a different color but I never used it and we threw away the box and so I never knew how to clean it so I do thank you again for this video because I wanted to start using it since it's just been collecting dust and basically the vacuum needs to be vacuumed LOL

    • @Jean78578
      @Jean78578  11 месяцев назад +1

      Glad it was helpful!

  • @Dr.GregoryBlundell
    @Dr.GregoryBlundell 8 месяцев назад +1

    Great Tutorial - You Tech Angel are Killer!!!

    • @Jean78578
      @Jean78578  8 месяцев назад +1

      Glad it was helpful!

  • @pixiemermaid
    @pixiemermaid 2 года назад +2

    Great video! thankyou for this helpful detailed information.

  • @HappyWife93
    @HappyWife93 8 месяцев назад +1

    Very helpful. Awesome video! Thank you! ❤

    • @Jean78578
      @Jean78578  8 месяцев назад +1

      Glad it was helpful!

  • @morvenforest6577
    @morvenforest6577 2 года назад +2

    There's a newer model but mine died after 18 months. I bought a WANDVAC instead - it's awesome for picking up cat hair and litter (my primary use). Mostly on wood floors.

  • @ashleygarcia1346
    @ashleygarcia1346 5 лет назад +4

    I cleaned my vacuum for the first time and now it won’t pick up trash

  • @mikeking4193
    @mikeking4193 2 года назад +2

    Great info! Thanks.

  • @naomilaboo
    @naomilaboo 3 года назад +2

    Thanks helped a lot

  • @johndave132
    @johndave132 2 года назад +2

    Great video!

  • @wh690
    @wh690 3 года назад +4

    I replaced the battery and the new one won't charge. What do you think is wrong ? battery charger maybe ?

    • @Jean78578
      @Jean78578  3 года назад

      Yes, it could be the charger. Walmart sells a multifunction charger. Or, you could see if you have an old charger that has the exact same output and polarity and try it..

    • @candacewenig9284
      @candacewenig9284 3 года назад +1

      When I plug it in to charge the charging light comes on but after the light turns off and I go to vaccuum it doesn't turn on. What do you think is the problem?

  • @laurenkapellusch2615
    @laurenkapellusch2615 5 лет назад +4

    So my handle broke in 2. Any chance I can fix it?

  • @vaneenusa1776
    @vaneenusa1776 Год назад +2

    Thank you!!

  • @ler5299
    @ler5299 4 года назад +3

    Thank you

  • @carlogarcia209
    @carlogarcia209 Месяц назад +2

    When I vacuum my carpet it turns off idk why and I have the setting on carpet and it's fully charged do you know why

    • @Jean78578
      @Jean78578  Месяц назад +2

      That does sound like the battery may be going bad..

    • @yoonboone603
      @yoonboone603 Месяц назад

      Thank you! I was wondering the same thing, I'll have to check it out

  • @leighterry943
    @leighterry943 3 года назад +3

    U’re Awesome!😺💞

  • @themanjit
    @themanjit 4 года назад +3

    Very nice

  • @marlonhernandez8411
    @marlonhernandez8411 2 месяца назад +1

    Did you work for shark or any other company,for a few years, assembling department perhaps?

    • @Jean78578
      @Jean78578  2 месяца назад +2

      No. I'm just very persistent and frugal. :)

  • @melissagonzalez1488
    @melissagonzalez1488 5 лет назад +3

    How do I put the lower handle back on vacuum

  • @tomcabrera8223
    @tomcabrera8223 3 года назад +1

    The weak link the swivel handle. The plastic piece that goes into machine breaks but easy fix when you order the plastic insert for about 8 dollars.

    • @dangrossheider7304
      @dangrossheider7304 3 года назад

      I can’t get the piece back in the head,,feels like I’ll break it

  • @crislimbo1682
    @crislimbo1682 2 года назад +1

    I’m unsure if I should get this one for my mom (63 yo) or the bissell airram, any suggestions?

    • @Jean78578
      @Jean78578  2 года назад

      The Shark stick vacuum is super lightweight and manuverable. I would say is for a light duty. So it all depends what your needs are.

  • @carakennedy7131
    @carakennedy7131 Месяц назад +1

    I lost the washer and little nub the belt goes on, do you know where I can find another

    • @Jean78578
      @Jean78578  Месяц назад +1

      Probably eBay. I just searched for "shark" and the model number and there are all types of parts listed.

  • @Darth_Raider_
    @Darth_Raider_ 4 года назад +1

    It has a trench to keep the dirt locked in so it doesn't escape the tray

  • @danimotherofchickens479
    @danimotherofchickens479 6 месяцев назад +1

    We're the wheels rubber or plastic

    • @Jean78578
      @Jean78578  6 месяцев назад

      They are plastic..

  • @aurelioretana537
    @aurelioretana537 Год назад +1

    How many time work it with battery only

    • @Jean78578
      @Jean78578  Год назад +1

      I've never timed it. But, it lasts a good while.

  • @tilsaalvarado
    @tilsaalvarado 3 года назад +1

    Is there any place I can find the trap door. Mine is practically new and my husband accidentally threw it away.

    • @Jean78578
      @Jean78578  3 года назад

      Maybe, contact Shark to see if they sell the part.

    • @tilsaalvarado
      @tilsaalvarado 3 года назад

      @@Jean78578 Thank you for answering. I have been calling but they don't answer.

  • @lindseyhogan2938
    @lindseyhogan2938 2 года назад +1

    Does the brush spin

  • @pamelameckley5040
    @pamelameckley5040 2 года назад

    I took the brush out to clean it and now the brush won't spin to pick up trash. I put the belt back on where the teeth are but it's just not making the brush spin. Any ideas on how to correct this problem?

    • @Jean78578
      @Jean78578  2 года назад +1

      Make sure do you brush orientation is correct one and has a square post. Also, make sure the belt is on and connects to the teeth.

  • @vancap9725
    @vancap9725 6 месяцев назад +1

    I didn't see any filter.

  • @rhondaamrein7946
    @rhondaamrein7946 2 года назад

    I had taken my brush out to clean it but when i put it bk in the brush doesnt turn like it should, what do i do to make it turn?.

    • @Jean78578
      @Jean78578  2 года назад +1

      Ensure the square end of the roller is full seated into the square indention. Otherwise, the roller will not be grabbed/spun.

  • @terrivideo1
    @terrivideo1 11 месяцев назад +1

    You can wash the removable dirt tray!! 😂

  • @truth9678
    @truth9678 3 года назад +2

    You're amazing for a girl very technical savvy you I think I'm in love with you

  • @SuperDenise128
    @SuperDenise128 22 дня назад +1

    Brand new V2950. Rollers don't work. BRAND NEW!

    • @Jean78578
      @Jean78578  22 дня назад +1

      If it's brand new, I would return it

  • @carlamarie6092
    @carlamarie6092 2 года назад +2

    Lucky to pay a dollar because I bought 4 at $55 a piece cause the handle continually breaks off...piece of junk very very cheaply made..do not recommend buying one unless you get it for $1 that's all it's worth.

    • @Jean78578
      @Jean78578  2 года назад +2

      Well, I'm happy my handle has not broke. But if it did, I would rig a fix. :)

    • @pamela4398
      @pamela4398 2 года назад +1

      You might be being to forceful on the handle if you’ve broken four of them. I love my Shark vac and thanks to this video I know how to work on it and love it more!

  • @charlie-bucket
    @charlie-bucket 2 года назад

    Rick krackers