👉👉👉 Support this channel and start a discussion about the new Siemens NX Sketch Solver - replies guaranteed 👈👈👈 👉👉👉 Our Siemens NX 2007 Update Training and many others can be obtained here: www.bizlearn.de/en/nx-continuous-update-training/
Hello Simon, the use case for the zero offset now works in the latest release of NX, the June 2022 release will allow you to change the value to zero and then change it back to another value. Nice job on the video, I love see to see what you are doing.
I had another issue with the so called "new AI". It was applying a vertical relation on a line because, yes, it was vertical during editing the dimensions at some point. Very annoying. BUT. The AI is not "ON" when you're outside the sketch editor. I bet your offset in this example would work if you edit the p0 expression when outside the sketcher and from the expression toolbox. Thank you.
I understand the A.I. "hype" sells and quite clever marketing strategies for several products, and that's a perfectly legal scam, however implemented into an engineering toolbox it can become a laughable issue quite frankly. Not going to do NX and Siemens any favour long-term that's for sure, and so that'll be wiped out soon or later. Be patient.
I agree in some points. Having some issues myself nowadays. But I have to deal with it and that is why I'm not sharing my negative opinions. Making the best out of it!
Which version is faster Nx 10 vs Nx 2027 Specially in making solid body to pattern 1000x copies in spiral or round way...... Some kind of texture im trying to do in tube shape
I haven't recognized a difference. But the pattern settings and kind of feature need to be chosen properly. I'd recommend pattern face and a reduction of the number of objects.
I like to be in control of what I am drawing, this thing puts constraints where it thinks they should go This is actually the biggest debacle I have seen in CAD software upgrades in the last 25yrs. It is costing companies many many hours. AI in CAD software is rediculous!
An important improvement has been realized since NX2206, which allows you to take full control. Also NX sets proper priorities now. Anyway, the way of sketching is different. Constraints do no more exist
@@Bizlearn_Siemens_NX_Training Have you tried using it for complex sketches, then coming back to edit the sketch? It relaxes important constraints without asking, constraints holding the sketch geometry together. it is beyond bad, it's absolutely aweful.
How to stop auto persistance relation creation in nx2000 & nx2015 For example.. I will draw a horizontal line, and I will draw another horizontal line, but both line not a colinear. If I create the dimension the both line they will create a colinear realation.
This thing with zero dimensions makes sense, with offset it's hard to know which side was the offset intent. This should be a problem even if there was no AI detection. A dumb but quick way is to use a secondary offset, in this case -1mm and then drive the expressions off of that. It's ugly but it works
"ugly but it works" 🤘 made my day 😅 But anyway, NX remembers the offset regarding the curve direction. Every curve has a direction. So, it shouldn't matter. Or do you have a different experience?
@@Bizlearn_Siemens_NX_Training No, I had no idea NX would remember the initial offset direction. I had similar problems in inventor (of course) which doesn't know left from right. This ugly solution worked in that instance.
I can't remember how many workaround I had to find to overcome NX misbehaviours. And despite some flaws, it's still my favorite CAD package by far. Anyway, your -1mm "ugly" solution, to my eyes is as valid (if not better ;) ) as creating point set and relations :/
Hi Simon, habt ihr evtl. eine Lösung, wie man die nicht persistenten Beziehungen dauerhaft sichtbar machen kann? Bei den persistenten ist kein Problem aber ich möchte z.B. schon während dem skizzieren sehen, ob Kurven in Beziehungen zueinander stehen bzw. welcher Beziehungen vorhanden sind . Es macht ja faktisch keinen Sinn die Beziehungen händisch zu setzen, nur um sie sehen zu können. Ich denke hier muss Siemens dringend nachbessern.
Hi Bostjan, du siehst die nicht-persistenten Relationen nur dann, wenn du ein verknüpftes Objekt auswählst - dagibt es leider oder zum Glück keine andere Möglichkeit. Ich persönlich kann den Unmut verstehen, aber bei mir hält er sich in Grenzen. Denn nach einer Weile habe ich mich dran gewöhnt, das System machen zu lassen :-D Im aktuellsten Major gibt es die Möglichkeit, anhand von einem Toggle ausschließlich persisten relations zu erzeugen (quasi so wie früher zu arbeiten mehr oder weniger). Auf welcher Version arbeitet ihr denn aktuell? Viele Grüße, Simon
You will have to disable it for the entire company and once a sketch has been converted, there's no way back. I haven't made commonly bad experiences with the new solver, especially since the latest major release. Can I ask, which nx version you are using currently?
That's a huge step. Over 6 hours of video material, just concerning basic designing. Hope you enjoy some of the other improvements anyway. The solver has gotten some nice enhancements in 2206, which might help. And regarding your huge sketches, the work region might be a bit of a support, not the solution, but a workaround
@@Bizlearn_Siemens_NX_Training I read something about "Work Region" but didn't really understand it. Does it isolate parts of a sketch? The biggest issue for now is, we are getting "Over Constrained" errors when exiting Sketches, but can't find the issue....
👉👉👉 Support this channel and start a discussion about the new Siemens NX Sketch Solver - replies guaranteed 👈👈👈
👉👉👉 Our Siemens NX 2007 Update Training and many others can be obtained here:
www.bizlearn.de/en/nx-continuous-update-training/
Hello Simon, the use case for the zero offset now works in the latest release of NX, the June 2022 release will allow you to change the value to zero and then change it back to another value. Nice job on the video, I love see to see what you are doing.
Thanks for the info!
I had another issue with the so called "new AI".
It was applying a vertical relation on a line because, yes, it was vertical during editing the dimensions at some point.
Very annoying.
BUT. The AI is not "ON" when you're outside the sketch editor.
I bet your offset in this example would work if you edit the p0 expression when outside the sketcher and from the expression toolbox.
Thank you.
I understand the A.I. "hype" sells and quite clever marketing strategies for several products, and that's a perfectly legal scam, however implemented into an engineering toolbox it can become a laughable issue quite frankly. Not going to do NX and Siemens any favour long-term that's for sure, and so that'll be wiped out soon or later. Be patient.
I agree in some points. Having some issues myself nowadays. But I have to deal with it and that is why I'm not sharing my negative opinions. Making the best out of it!
Which version is faster
Nx 10 vs Nx 2027
Specially in making solid body to pattern 1000x copies in spiral or round way......
Some kind of texture im trying to do in tube shape
I haven't recognized a difference. But the pattern settings and kind of feature need to be chosen properly. I'd recommend pattern face and a reduction of the number of objects.
So this sketcher looks identical to the Solid Edge sketcher...is it?
I like to be in control of what I am drawing, this thing puts constraints where it thinks they should go
This is actually the biggest debacle I have seen in CAD software upgrades in the last 25yrs. It is costing companies many many hours. AI in CAD software is rediculous!
An important improvement has been realized since NX2206, which allows you to take full control. Also NX sets proper priorities now. Anyway, the way of sketching is different. Constraints do no more exist
@@Bizlearn_Siemens_NX_Training Have you tried using it for complex sketches, then coming back to edit the sketch? It relaxes important constraints without asking, constraints holding the sketch geometry together. it is beyond bad, it's absolutely aweful.
How to stop auto persistance relation creation in nx2000 & nx2015
For example..
I will draw a horizontal line, and I will draw another horizontal line, but both line not a colinear. If I create the dimension the both line they will create a colinear realation.
This thing with zero dimensions makes sense, with offset it's hard to know which side was the offset intent. This should be a problem even if there was no AI detection. A dumb but quick way is to use a secondary offset, in this case -1mm and then drive the expressions off of that. It's ugly but it works
"ugly but it works" 🤘 made my day 😅 But anyway, NX remembers the offset regarding the curve direction. Every curve has a direction. So, it shouldn't matter. Or do you have a different experience?
@@Bizlearn_Siemens_NX_Training No, I had no idea NX would remember the initial offset direction. I had similar problems in inventor (of course) which doesn't know left from right. This ugly solution worked in that instance.
I can't remember how many workaround I had to find to overcome NX misbehaviours.
And despite some flaws, it's still my favorite CAD package by far.
Anyway, your -1mm "ugly" solution, to my eyes is as valid (if not better ;) ) as creating point set and relations :/
Hi Simon, habt ihr evtl. eine Lösung, wie man die nicht persistenten Beziehungen dauerhaft sichtbar machen kann? Bei den persistenten ist kein Problem aber ich möchte z.B. schon während dem skizzieren sehen, ob Kurven in Beziehungen zueinander stehen bzw. welcher Beziehungen vorhanden sind . Es macht ja faktisch keinen Sinn die Beziehungen händisch zu setzen, nur um sie sehen zu können. Ich denke hier muss Siemens dringend nachbessern.
Hi Bostjan,
du siehst die nicht-persistenten Relationen nur dann, wenn du ein verknüpftes Objekt auswählst - dagibt es leider oder zum Glück keine andere Möglichkeit.
Ich persönlich kann den Unmut verstehen, aber bei mir hält er sich in Grenzen. Denn nach einer Weile habe ich mich dran gewöhnt, das System machen zu lassen :-D
Im aktuellsten Major gibt es die Möglichkeit, anhand von einem Toggle ausschließlich persisten relations zu erzeugen (quasi so wie früher zu arbeiten mehr oder weniger).
Auf welcher Version arbeitet ihr denn aktuell?
Viele Grüße,
Simon
@@Bizlearn_Siemens_NX_Training auf welchen Toggle beziehst du dich ? Mir wäre außer dem Toggle für den alten Skizzierer keiner aufgefallen
how to pattern a solid body in siemens nx ?
Pattern geometry can be used therefore. It's called instance geometry in older versions. Thank you for asking 😉
Try using this new Sketcher in Large Legacy Sketches, just about unusable and the biggest time waster ever. Please tell me how to disable this rubbish
You will have to disable it for the entire company and once a sketch has been converted, there's no way back.
I haven't made commonly bad experiences with the new solver, especially since the latest major release. Can I ask, which nx version you are using currently?
@@Bizlearn_Siemens_NX_Training we just upgraded from NX12 to NX2007. I think it may have been too big of a jump
That's a huge step. Over 6 hours of video material, just concerning basic designing. Hope you enjoy some of the other improvements anyway. The solver has gotten some nice enhancements in 2206, which might help.
And regarding your huge sketches, the work region might be a bit of a support, not the solution, but a workaround
But I'm blind of course, not sitting in front of your designs 😅
@@Bizlearn_Siemens_NX_Training I read something about "Work Region" but didn't really understand it. Does it isolate parts of a sketch? The biggest issue for now is, we are getting "Over Constrained" errors when exiting Sketches, but can't find the issue....