This reminds me of a friend who used coat-hanger wire as a welding rod when arc welding engine mounts to his car. The welds looked just fine, but after a few weeks of driving, the engine fell out and ended up lying on the road! The motto of the story is: metals may look the same, but some are a *lot* stronger than others. Recycling is great, and I admire these folks' ability to improvise, but I'm not sure I'd want to trust anything important to those bolts, that's for sure.
Acho que é ferro de poste quebrado ou vigas de concreto. Talvez vergalhão ca 60... Mas o pior é a falta de segurança desses trabalhadores : roupas inadequadas com muito pano sobrando, pode facilmente enroscar em uma polia ou correia. Mas esses caras são durões 👏👏👏 Os caras tiram leite de pedra...👏👏👏👏👏👏👏
Rebar is generally a high carbon, high strength steel, not "iron". These machines are antique units from U.S. factories used in the 60's. These are probably better quality/stronger bolts that you would get out of today's manufacturing processes.
After a working lifetime in engineering I am fascinated by the raw skills these men have, I also cringe at the total lack of safety. How they keep all their fingers and toes is a miracle. I salute you all and I also pray for a better life for you.
"(...) How they keep all their fingers and toes is a miracle (...)" No miracles. Most of them minor injuries get constantly, some of them lose toes and especially fingers time to time. It happens to lose a hand or all the body is pulled in to a rotating machine and... minced. After serious accident the injured worker immediately... fired, the owner hires a new one. The only requirement for a new worker is to have 10 fingers and 10 toes. The boots, goggles, uniforms are welcome (if you have your own), but not obligatory. However, they get good salaries - $25-50 in a week; and get absolutely no pensions when retired.
307A. Do u suck ur cars bolts dicks much? All ur water mains could care less what ur lamborgini needs to keep the wheels on. Martians! Revelation 12:7-9.
Since you're so Amazing, Why don't you make your own products and let those trying continue to contribute to society and evolution or shut your mouth.. show us what you've done better than this guys
The production methods are the same, but the quality is another question. They show their efforts to reach our level, but the main problem is social and growth of people
forget about the product, but the techniques used in the machines are quite impressive, especially the machine, that work as a buffer station arranging and aligning bolts before thread rolling works completely mechanical without any sensors .5:03
Fantastic. And cold formed and pressed bolts get some case hardening. For tempering, these bolts would have to be taken to another facility for heating in furnace and controlled cooling and anealing. The furnace guy probably has an operation a block down the street, take left turn. Very nice Enterprise, and a very nice way of dividing "manufacturing specializations" into small low investment operation. Takes a lot of courage and devotion. These are not the explosive bolts used between stages of a Saturn 5 rocket, so don't be so critical.
I ran a header at Huck mfg for ten months. The blanks I made were then rolled and heat treated for a certain tensile strength, but it only works on carbon bearing alloys. You cannot heat treat soft iron such as rebar is made of. It has no carbon because it's soft on purpose so the knurling surface texture can be easily pressed into it. That knurling is what the concrete grips onto when it cures. Soft iron is totally the wrong alloy to make bolts out of.
@@vincentwade1 this factory doesn't work towards market-failure. It's working towards shipping and returns... For the last 150 years. Application time concerns are left to the market "space"....where Caveat Emptor is the rule.... Nevermind
СЛАВА БОГУ, МОЛОДЦІ !,ХАЙ БОГ БЛАГОСЛОВИТЬ ДУЖЕ РЯСНО З НЕБА І ЗЕМЛІ МИРОМ І ВСІМ ДОБРИМ РАНКОМ Й ДІТЕЙ ТА МОЛОДІ СЕРЦЯ БАЖАЮ ВАМ ЩАСТТЯ ВІД ГОСПОДА БОГА І ЗДОРОВЛЯ НАШОГО ІСУСА ХРИСТА І ЧИТАЙ ЄВАНГЛІЮ ПОКАЯННЯ НАВЕРНЕННЯ РОКУ ПЛАН ЗАХОДІВ
Ốc lớn làm dễ hơn ốc vít nhỏ như đt ...đều là thép thôi...nhưng cái này chưa mạ kẽm thì phải... Nhìn nhớt bôi trơn đủ biết họ tiết kiệm...giá bán chắc thấp... Loại này ko mạ kẽm sau này tháo muốn khóc ... Pakistan mưa cũng đâu ít
Look at these workers who are doing dangerously unsafe work with no leather safety boots no leather gloves no goggles for eyes while welding no protective clothing 😊
It will work as a bolt. But will not have any consistency in the quality of the steel. One batch might be ok, and the next will be junk. And like Forest Gump said...you never know what your gonna get.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
This reminds me of a friend who used coat-hanger wire as a welding rod when arc welding engine mounts to his car. The welds looked just fine, but after a few weeks of driving, the engine fell out and ended up lying on the road! The motto of the story is: metals may look the same, but some are a *lot* stronger than others. Recycling is great, and I admire these folks' ability to improvise, but I'm not sure I'd want to trust anything important to those bolts, that's for sure.
8ii8t
Did they wrap the coat hanger in wet paper towel?
You know there's different grades of bolts right?
Acho que é ferro de poste quebrado ou vigas de concreto.
Talvez vergalhão ca 60...
Mas o pior é a falta de segurança desses trabalhadores : roupas inadequadas com muito pano sobrando, pode facilmente enroscar em uma polia ou correia.
Mas esses caras são durões 👏👏👏
Os caras tiram leite de pedra...👏👏👏👏👏👏👏
Rebar is generally a high carbon, high strength steel, not "iron". These machines are antique units from U.S. factories used in the 60's. These are probably better quality/stronger bolts that you would get out of today's manufacturing processes.
After a working lifetime in engineering I am fascinated by the raw skills these men have, I also cringe at the total lack of safety. How they keep all their fingers and toes is a miracle. I salute you all and I also pray for a better life for you.
"(...) How they keep all their fingers and toes is a miracle (...)"
No miracles. Most of them minor injuries get constantly, some of them lose toes and especially fingers time to time.
It happens to lose a hand or all the body is pulled in to a rotating machine and... minced.
After serious accident the injured worker immediately... fired, the owner hires a new one. The only requirement for a new worker is to have 10 fingers and 10 toes. The boots, goggles, uniforms are welcome (if you have your own), but not obligatory.
However, they get good salaries - $25-50 in a week; and get absolutely no pensions when retired.
Hanno. Voglia. Di. Lavorare......🇮🇹🖐️✋👍👀
www.youtube.com/@blackpearl3242
For those who are impressed, let's replace all the bolts in your car using these made by these gentlemen.
Haha, definitely! It would be a shit show!
Look like its from Pakistan..
i dread to think how long they lasted before failing.
i often wondered who still used or produced whitworth threads.
307A. Do u suck ur cars bolts dicks much?
All ur water mains could care less what ur lamborgini needs to keep the wheels on.
Martians!
Revelation 12:7-9.
I’m sure the quality conforms with ASTM specifications! After all, they use only the best quality scrap rebar!
Excellent video ! 👍
satisfying amounts a crap on the floor. nice!
I made bolts for Bethleham Steel in Lebanon PA and our machines did all the steps with one machine.
what machines did you use ?
That's how I like my bolts. Made out of old rusty iron.
These bolts must come with a warning: "Do not tighten the bolt. Risk of failure! For decorative purposes only"
May be for ordinary purposes, not for high tensile uses in machinery..
@@Abc-qk1xt May..... :-)
Million dollars this is a yet dude
Since you're so Amazing, Why don't you make your own products and let those trying continue to contribute to society and evolution or shut your mouth.. show us what you've done better than this guys
What have you done show us
It's a good thing that they're all wearing their safety flip flops.
Техника безопасности вышла покурить )))
Какое покурить вышла!? Она, когда мимо проходила, даже не заметила этот гараж!
Да ладно с ТБ. Качество болтов из арматуры ,это вообще жесть)
The production methods are the same, but the quality is another question. They show their efforts to reach our level, but the main problem is social and growth of people
Wow wonderful invention of Machines
British Empire left a fantastic legacy behind, still going strong !
forget about the product, but the techniques used in the machines are quite impressive, especially the machine, that work as a buffer station arranging and aligning bolts before thread rolling works completely mechanical without any sensors .5:03
OSHA Approved!
Nice work ❤
Looks good enough for a home depot bolt bin 😂😂😂
Realy amazing and obsolutely hard work for their bread
otro día tranquilo en una fabrica nacional y popular de tornillos de la matanza conurbano. Gracias general Perón :D
Fantastic. And cold formed and pressed bolts get some case hardening. For tempering, these bolts would have to be taken to another facility for heating in furnace and controlled cooling and anealing. The furnace guy probably has an operation a block down the street, take left turn.
Very nice Enterprise, and a very nice way of dividing "manufacturing specializations" into small low investment operation. Takes a lot of courage and devotion.
These are not the explosive bolts used between stages of a Saturn 5 rocket, so don't be so critical.
I ran a header at Huck mfg for ten months. The blanks I made were then rolled and heat treated for a certain tensile strength, but it only works on carbon bearing alloys. You cannot heat treat soft iron such as rebar is made of. It has no carbon because it's soft on purpose so the knurling surface texture can be easily pressed into it. That knurling is what the concrete grips onto when it cures. Soft iron is totally the wrong alloy to make bolts out of.
@@vincentwade1 this factory doesn't work towards market-failure. It's working towards shipping and returns...
For the last 150 years.
Application time concerns are left to the market "space"....where Caveat Emptor is the rule.... Nevermind
@@droverslane4678reo is quaity steel that is heat treated for full tensile strength
Work hardening has nothing to do with case hardening 😅
@@vincentwade1reo bar isn't iron it's steel , best do some studies
And this here folks is how you get bolt grade less than 8.8. At least now we know where they're coming from
Probably stamped 8.8 though
OSHA would shut this place down in a heartbeat.
Luckily they don't need a license to work and feed themselves.
@@topduk It would be hard to find workers like that in the US.
West Midlands industry still going strong
¡Genial!
Acero en desuso que es convertido en algo útil sin tener que fundirlo emitiendo carbono a la atmósfera.
Isso não é aço, é ferro macio, não é um parafuso resistente e confiável
Молодцы 👍💋
Grande. Esperienza.....👀👍✋🖐️🇮🇹
Mesin sederhana menghasilkan teknologi yg luar biasa.
Very nice Grade .5 bolts…
So these bolts are at best 4.2 which might hold parts of your washing machine together.
Maybe they do yeah...
These are old rods used in any bridge are better than today's iron rod
No, it's not.
Good to see the Boeing 737 max fastener production line.
The 737 Max bolts didn’t fail. They can’t fail if they’re not even installed! :p
О даааа это же мои любимые болты из пластилина
Это наоборот отличные болты, уплотнённые.
Next time when a bolt snaps i will remember that video
This stuff is back from the British occupation era and still going well 😊
No safety gear, great job
I was more impressed with the comments than I was with the video itself
greetings uncle, always be careful uncle, at work, making bolts that are amazing uncle, carefully and compactly in work, always healthy uncle.🙏🙏🙏🙏🙏
Bolts with the tensile strength of rebar 🤤🤤
Just like the ones we get from China now.
Tofu Dreg rebar
ماشآءالله ماشآءالله تبارك الرحمن جزآك الله خير ❤❤❤❤❤
Now is clear why we have airplane disasters , buildings falling and clutch fault :))
Making bolt from rusty iron bar was great proccess. Very interesting video. Thank you..🙏⚘
Regards
looks like ancient 19century brittis engineering.
Great video ! 👍
ye technology mere khyal se 15-20 saal purani ho chuki hai India me sayad hi kahi dekhne ko milegi.
this is in Pakistan
aaho india chand ty chla gia
Guys, this video is 100% genuine.
О культуре производства и технике безопасности на производстве видно ни кто даже не слышал.
А зачем это им, продукция идёт и всё нормально!
Плодятся как тараканы!
Это всё от бездуховного Запада, настоящие мужики до соблюдения ТБ не опускаются
Its a developing economy. Things were same in ur country just 4 years ago
Las Chanclas.
Son Ideales
Para este Trabajó
СЛАВА БОГУ, МОЛОДЦІ !,ХАЙ БОГ БЛАГОСЛОВИТЬ ДУЖЕ РЯСНО З НЕБА І ЗЕМЛІ МИРОМ І ВСІМ ДОБРИМ РАНКОМ Й ДІТЕЙ ТА МОЛОДІ СЕРЦЯ БАЖАЮ ВАМ ЩАСТТЯ ВІД ГОСПОДА БОГА І ЗДОРОВЛЯ НАШОГО ІСУСА ХРИСТА І ЧИТАЙ ЄВАНГЛІЮ ПОКАЯННЯ НАВЕРНЕННЯ РОКУ ПЛАН ЗАХОДІВ
철근 공사장에서 작업 하는사람들 오늘도 수고하세요
감사합니다
Very easy and simple technique.
Very satisfying.
Using trash to make garbage! Amazing!!
Ốc lớn làm dễ hơn ốc vít nhỏ như đt ...đều là thép thôi...nhưng cái này chưa mạ kẽm thì phải... Nhìn nhớt bôi trơn đủ biết họ tiết kiệm...giá bán chắc thấp... Loại này ko mạ kẽm sau này tháo muốn khóc ... Pakistan mưa cũng đâu ít
Excellent
Amazing job
Wow imagine how much work they can get done without all the safety like in the US and they made something usable out of trash. Great job.
Wow amazing work 👍
Look at these workers who are doing dangerously unsafe work with no leather safety boots no leather gloves no goggles for eyes while welding no protective clothing 😊
Like amazing machine using scrap to a mass production of bolts
Nice tornos they have here. Is this the 2022 model?
Amazing!
Super el video q maravilla y se SENCILLO
Thank you for this informative and educational video!
www.youtube.com/@blackpearl3242
Beautiful vlog
Might be ok to hold one of the trucks made from scrap together.
Proses produksi yang luar biasa
Good work
These bolts must have a heated threat to use on heavy duty equipment. Otherwise they just can use on bicycles or small household stuff only.
Very good!
👏👏👏👏
Amazing bolt video 💜💙❤🧡
These rods are taken from demolished buildings. These old iorn rods are used to make bolts. Will they with stand?
Whether these bolts have the required fastening binding strength ???
Anna m
Да имеют и эта прочность называется сталь пластилин -3
Didn't you see the first process where the iron was stretched and straightened out... that's also the strengths test.
интересно,какой у них предел прочности?) 0?) Это пластилин без термообработки,который на минимальных моментах вытянет)
1)Они делают из пролежалаго металла
2) вытягивают тем самым добавляют прочность
3) эти очень хорошие болты на выходе ))
بارك الله فيكم ❤️
Jallah uh ahkbarz 🛬🏢
I'd love to see batch tests of the tensile strength of these bolts.
I bet that would be some shocking reading.
Rebar is decent quality carbon steel, it's designed to be strong in tension.
As long as the bolts are annealed correctly they should be ok.
ภั6พพพกกขภผไฃลัล
@@kenbakker3241 Did he say that? No, there are different grades of bolts you know... Sheesh, stop putting words in people's mouths, Bridget.
@@cedley1969 Yea, especially Tofu Dreg rebar. Don't throw all of rebar into a single assumption bucket.
Ausgezeichnet 👍👍👍👍👍
Makes you wonder how long ago they made those machines in Birmingham?
lol
About 100 years
👌👌👌👌👍👍👍👏👏👏 SUPER
Thakns for watching❤️
Nice 💘
некоторые тупые блогеры наконец то узнали, что болты не природное ископаемое😁
лайк работягам однозначно 👍
я про станки😁
Lol the bolts holding the schoolbus brakes on came from there.
👍👍maine BHEL BHOPAL me aise lakhon pices banaye the...Capstone and Turriet Lathe machine me🙏🇮🇳❤️ se
Khaan hy bhai aap ki factory?
so nic Pakistan vai
WOWW the way it works is really good
Good
👍👍
Thats some Dollar Store bolts
Excellent!!
The most important part on every step is to throw everything to the ground 😂
Блин. Это чтож за болты получатся из строительной арматуры? тем более б/у арматура)
Is using the bolts made from rusted iron safe ?
It will work as a bolt. But will not have any consistency in the quality of the steel. One batch might be ok, and the next will be junk. And like Forest Gump said...you never know what your gonna get.
I wouldn’t use it to hold anything critical. General use ought to be fine though.
Nothing in this video is safe.
@@craig2963 Forrest Gump's mother*
No absolutely no
Too bad, the bolts are wearing slippers in the workshop! Signature: "Those we know"
I wish to start the same project in my country but I don't know how to start it!!
Mantul kreativ 👍👍
Сталь марки пластилин-3 😎
Very niece videot
That is a lot screws going on!!!!!!!🔴🫢🤫
I wonder what grade those are
Grade ooooooo absolute junk
thank you so much bro its so good
🙋♀️🇻🇳👍