I’m just being humorous. The camera pans to the grit machine and all that’s left is a small polished marble 😮😂. Thanks for the video. I use CTD pads all the time
WOW! This is some seriously great bowling tech! This can really change the way a lot of people approach lanes pre-league and what not. I cannot wait to get me a set of these!
AS AN OLDER BOWLER at age 62 - throwing the ball at lower speeds (12.5 mph ish) the P5000D pads used with the Turtle Wax 5500 let me bowl where I want to on dry lane conditions without killing myself.
This video is over 5 years old, so I don't know if the original uploader of it is still reading new comments, but I'll ask my question anyway. I'm a novice bowler who is learning, but I've purchased 3 new balls over the past 9 months, and want to maintain them myself to keep them in the best condition possible. My first ball is a Storm Hyroad pearl, followed by a Global 900 Harsh Reality solid, and I just bought a Hammer Black Widow 3.0. What products do you suggest I use on each of these three balls to keep them like new, or in their best condition? Thanks in advance to anyone replying to my question.
I wet sand my ball by hand with 2000 since it came out of the box as such, before every bowling session. The ball hooks a ton as expected and the backend is most angular. This type of reaction only lasts about 6 frames for me, however. As the ball soaks up the oil, it will not hook as much as it did during the first 5 frames.
That's partly because the pad you are using wasn't made to cut a bowling balls. ctdbowling.com/blogs/news/trucut-launches-innovative-first-dual-sanding-pad-p5000d
No, the durability of this pad is about 1/2 of the other pads as the technology used to get it to shine a ball is very different. The good news is the surface lasts 3 to 4 times longer on the ball.
Hey got a question when I used 1000 grit aberlon wet and by hand what pad would be the best with a truck cut pad I tried the 1000 by hand wet and was way to aggressive compared to the 1000 aberlon was so 2000 wet or a 3000 pad wet by hand be the best to get that same finish as a 1000 aberlon ?
Read this to understand how Abralon cuts and how TruCut cuts a bowling ball. ctdbowling.com/blogs/news/trucut-launches-innovative-first-dual-sanding-pad-p5000d
Been throwing the all road. Great ball. But im really struggling game 3. I cant seem to find a ball that goes longer down lane. I have the storm orange rocket. But not sure what finsh i should putvit at to help me. Any ideas?
You can use the Clear to restore the Raw Hammer, or look at the hammer fugitive line for a replacement. The purple hammer urethane is a good replacement for a urethane ball
@@Ctdbowling I’m liking the new hammer line ups and gonna purchase sooner or later definitely but not quite ready to give up the ones I have now I was meaning as far as pads I need to purchase any suggestions?
No it's about the same. The P5000D pad is actually less than the other pads because it is designed to break down to create the shine when used on a high speed spinner. If used by hand it's about the same
Just preordered the six pad set! I’m very impressed with the video testimonials and demos, can’t wait to add mine!
I’m just being humorous. The camera pans to the grit machine and all that’s left is a small polished marble 😮😂. Thanks for the video. I use CTD pads all the time
You're a talented speaker. Do more presentations.
WOW! This is some seriously great bowling tech! This can really change the way a lot of people approach lanes pre-league and what not. I cannot wait to get me a set of these!
Can't wait to get on staff and start trying these out
AS AN OLDER BOWLER at age 62 - throwing the ball at lower speeds (12.5 mph ish) the P5000D pads used with the Turtle Wax 5500 let me bowl where I want to on dry lane conditions without killing myself.
Looks like great products,my son bowls at Oklahoma Christian university and I will definitely get some stuff for him to try
Love the ctd pads. Use them all the time.
This video is over 5 years old, so I don't know if the original uploader of it is still reading new comments, but I'll ask my question anyway. I'm a novice bowler who is learning, but I've purchased 3 new balls over the past 9 months, and want to maintain them myself to keep them in the best condition possible. My first ball is a Storm Hyroad pearl, followed by a Global 900 Harsh Reality solid, and I just bought a Hammer Black Widow 3.0. What products do you suggest I use on each of these three balls to keep them like new, or in their best condition? Thanks in advance to anyone replying to my question.
I wet sand my ball by hand with 2000 since it came out of the box as such, before every bowling session. The ball hooks a ton as expected and the backend is most angular. This type of reaction only lasts about 6 frames for me, however. As the ball soaks up the oil, it will not hook as much as it did during the first 5 frames.
That's partly because the pad you are using wasn't made to cut a bowling balls. ctdbowling.com/blogs/news/trucut-launches-innovative-first-dual-sanding-pad-p5000d
Donald great videos
I would have liked to have seen you throw each ball at the end of the video to compare. Great videos though, keep up the good work!
We have a 5000 grit comparison to polish on my page.
Ron--To get a true 5000 surface can one go from 3000 TruCut to 5000 TruCut on spinner/Vertex? Thanks! Scott
Will the durability be the same as the lower grit trucut pads?
No, the durability of this pad is about 1/2 of the other pads as the technology used to get it to shine a ball is very different. The good news is the surface lasts 3 to 4 times longer on the ball.
Hey got a question when I used 1000 grit aberlon wet and by hand what pad would be the best with a truck cut pad I tried the 1000 by hand wet and was way to aggressive compared to the 1000 aberlon was so 2000 wet or a 3000 pad wet by hand be the best to get that same finish as a 1000 aberlon ?
Read this to understand how Abralon cuts and how TruCut cuts a bowling ball. ctdbowling.com/blogs/news/trucut-launches-innovative-first-dual-sanding-pad-p5000d
beautiful. great job, great tips.
dude, pls put on a mask pls. protect your respiratory system.
Been thinking about hitting my dark web with 4k-5k, just hit it with a 3000 abralon pad. Hoping it gets down further and reads the lane later
When these going up for sale? Ive got the kit but need 3000 and this pad... how does one get the ball to 3000 when not offered thru ctd?
Read this as we will offer 3000 grit in October 2018. ctdbowling.com/blogs/news/beginners-guide-to-surface
What sanding pad would I use for the storm physix for a factory finish?
TruCut 3000 grit. ctdbowling.com/products/trucut-by-ctd-sanding-pads
Been throwing the all road. Great ball.
But im really struggling game 3. I cant seem to find a ball that goes longer down lane. I have the storm orange rocket. But not sure what finsh i should putvit at to help me. Any ideas?
I would look at this kit. It will give you as much length as you need. ctdbowling.com/products/trucut-polish-pack?_pos=4&_sid=c9c0e4b1b&_ss=r
Longer down lane I highly recommend the brunswick twist or the storm tropical surge.
What would I use for a old raw hammer sir ? Or what should I purchase ? And also maybe a old urethane ball possibly
You can use the Clear to restore the Raw Hammer, or look at the hammer fugitive line for a replacement. The purple hammer urethane is a good replacement for a urethane ball
@@Ctdbowling I’m liking the new hammer line ups and gonna purchase sooner or later definitely but not quite ready to give up the ones I have now I was meaning as far as pads I need to purchase any suggestions?
Does sanding with 3000, then p5000d pads last longer than the other grit pads?
No it's about the same. The P5000D pad is actually less than the other pads because it is designed to break down to create the shine when used on a high speed spinner. If used by hand it's about the same
So I have a ball spinner and my ball say 500 polish. Do I do 500,3000,p5000?
No in that case you should just use 3000 and P5000D
Boy you got all the toys.
Will using a regular ball spinner yield the same results?
Yes it may take longer depending on the speed
What do you mean by "loading?"
"Loading" refers to the debris from the pad collecting or loading up in the pad.