Hello,thanks for video. My Freelander 2.0 di 2000 model has got shuttle valve switch electrical failure. TC and ABS warning lighr showing. Can ı do your method on my car for this problem. Thank u.
Hey guys! Happy to found you I have Disco 2 td5 with ABS abs electric discharge, when the car is off, the abs unit does not go to sleep, have any ideas? Thanks!
Hi Guys, did you use a code reader ? As i'm having a sensor issue but the code reader I have says, "sensor output too low" . Ive put new sensors on and removed the plugs, (soldered them together in the engine bay) I don't know now whether to do shuttle valve or double check the sensors in the hub, as I know the air gap should be 1 mm and that's critical but how can you be sure that the air gap is correct ? between the sensor and the toothed pinion wheel.
Hello mate wondering if u could help me out I done everything u done in the video but now when my wheels are trying to get traction it’s stopping my hole truck to a dead stop everytime I go off roading
![FNAF Into the Pit has A LOT of Unused Graphics | LOST BITS [TetraBitGaming]](http://i.ytimg.com/vi/6YhZCRdipl4/mqdefault.jpg)
it's a tricky job .but I done mine then i took to my local mechanic. He cleared the fault lights and it's been fine since
00 disco 2 , ty for the hack
Hello,thanks for video.
My Freelander 2.0 di 2000 model has got shuttle valve switch electrical failure. TC and ABS warning lighr showing.
Can ı do your method on my car for this problem.
Thank u.
Hey guys! Happy to found you
I have Disco 2 td5 with ABS abs electric discharge, when the car is off, the abs unit does not go to sleep, have any ideas?
Thanks!
That's a difficult one. I'd check the slabs unit for water ingress. Thanks for watching
Hi Guys, did you use a code reader ? As i'm having a sensor issue but the code reader I have says, "sensor output too low" . Ive put new sensors on and removed the plugs, (soldered them together in the engine bay) I don't know now whether to do shuttle valve or double check the sensors in the hub, as I know the air gap should be 1 mm and that's critical but how can you be sure that the air gap is correct ? between the sensor and the toothed pinion wheel.
We are still having issues with too low and erratic reading so we will keep you upto date once we have found the issue.
@@wardysworx Excellent work guys :-)
@The W worx did you find the issue ? I'm having a similar problem, fitted new shuttle valve and still flashing up as shuttle valve error
Hello mate wondering if u could help me out I done everything u done in the video but now when my wheels are trying to get traction it’s stopping my hole truck to a dead stop everytime I go off roading
Any lights on the dash?
Hi did the shuttle valve mod work thanks
It did tes
guessing as there was no "it worked " bit, it isn't the problem... so state that ... stop wasting people's lives!
It worked hows that for you