It looks very clean!! I need to look into that radio for my Lancer GT but first I need to switch out the stock speakers because they're no longer good lol
Had the android unit in my Lancer… was cool nut sound quality wasn’t good once I turned it up with the factory RF system. Thought about it in the Evo to have all my gauges but ended up with another pioneer. But love how the big screen updates the interior.
@@TheJMedia The best way to get the highest quality audio is to wire a bluetooth receiver on the AUX port, the receiver is built with a DAC aptX HD. The sound is way better than any chinese car radio that uses low-end bluetooth modules (even the most expensive ones).
Ok, what I want to know is how do you control the things you used to control through the MMCS headunit, like blinker flash, auto headlight sensitivity, auto wiper, remote functionality etc
@@TheJMedia My '08 doesn't have anything other than (mode, volume up/down and the 'channel up' and down arrows and cruise controls) Any thoughts on how to access all that stuff with steering control or the factory headunit access ? No idea what can be done through the obdii module other than what I can see with torque. I'd also really love to see what you can control from your steering column because the steering wheel looks the same as mine.
@bagerklestyne You have to go to settings on the headunit to reconnect the steering wheel buttons. There is an option called "steering wheel controls" under settings
Do the volume buttons on the steering wheel still work? I’m looking for a head unit because for some reason the factory one now causes battery draw when the car isn’t running
Wiring harness to connect OEM back up camera to headunit is also by Xtrons. Can be found on Amazon. ruclips.net/video/KuABk66HEJ0/видео.htmlsi=vYx3pfWEr3Qnlnvw
Nope no issues at all. You might have bought a cheaper headunit with lower specs. They all look the same but they go for different price points and different specs.
It should work just fine if you connected all the wiring correctly. If you have Rockford fosgate or premium amp, you might need to connect an external an amp
I'm afraid that having the Gps antenna exposed outside that the antenna will get damage from heat. It may not be now but soon. How much difference (in terms of reception) will it make if I have the gps antenna inside or outside like you did? Thank you
I had the gps antenna outside for years on my other cars and never had any issues. I always had it out for better reception so not sure if putting it elsewhere would make reception more slow
So Mine 2015 Mitsubishi lancer S he has a back up camera. I bought a radio similar to this and I was wondering what I have to splice the back up camera wire into the original wire?
Hey, my 2015 Mitsubishi lancer came from the factory with a back up camera as well. I just had to connect all the wiring harnesses provided and back up camera works
Hey, I have a problem with my new Android radio. I saw in your video that you only plugged in one of the 3 factory cables which provided power. I did the exact same thing as you but I didn't get any audio out. After a little trouble shooting I found out that there is another factory plug that is responsible for the speakers/audio. How did you solve this now with you, please for help
I had no issues with audio. If you connected everything, it may be either wiring issue or the Android radio issue. Try contacting your seller for support
Make sure all your wiring is connected correctly. If you have Rockford, you might need to buy an additional amp or plug in for it. Check with your seller
I am sure the wiring is correct, but i just dont understand, the only problem is with the sound,but im not quite sure which wire belongs to the sound system, maybe you know?
@cassie_385 Sorry I don't since I don't have Rockford stereo. From what I heard, you might need to get a separate wire if you have Rockford stereo. Try contacting your seller to see if there is another wire
Does this work on a kit that was meant for 7inch double dins? I currently have a 7 inch double din with a 7 inch double din kit . So I. Was wondering can I keep the same kit when I switch to the 10 in double din
Yes you can go to the settings page on the headunit to adjust volume. There is also a small "+ and -" sign on the side of the headunit to adjust as well
It really depends on the ram and rom storage of the head unit. If you buy a cheaper one with 1gb RaM and 16gb rom, then it is going to be slow vs a 4gb rm and 64gb rom.
I also have the RF audio package. I had a simlar issue a when I installed mine a couple of months ago. I had to connect two of the RCA connectors, I'll dig thru my email to find the solution the seller gave me. OK, I found it. Ofcourse you have likely already connected the amp ctrl wire with your acc wire. If you haven't than go ahead and make it so. Now to the RCA connections. "AUX (L & R) IN" should be connected to "AUDIO OUT (L & R)." That had me up an running and I hope you have the same result. If you've already figured it out perhaps someone else will find this useful
I got rid of the aftermarket big screen when I got my EVO X and put in an OEM radio into my 2011 EVO X GSR.. The same one you showed here in this video.
@@TheJMedia Yes, the nav is outdated I will say, I think you can update it. But I'm really unsure, Don't see why you couldn't update the maps? I just kinda like the OEM looks., Besides I had to hotspot my phone to use google maps for the GPS. Now, the aftermarket radios you have the choice for google and or apple car play
@@TheJMedia I haven't even tried to update the map, I'm unsure how old it is. But, I guess you can go to the dealer and get an updated SD card to be used. I'm sure it will be like 200$
Hey im having a problem with the radio and im wondering if you know the solution . When the car is on the screen cuts out and says “no video signal” but when I only turn the key once the the screen and audio works fine. Do you know what the problem could be?
Hey, sorry not sure what your issue might be but sounds like it is not getting power. You'll have to turn the key once to accessory mode to have radio turn on
I have one on mines but it won’t work on Bluetooth any suggestions like it connects but the only thing it plays is a song that the system already has downloaded by maddona😂
It should work just fine. Sounds like music is playing so sound works but maybe check to make sure that your phone has been connected to the headunit and make sure that phone and headunit settings are working good?
You can buy it from here: Https://www.amazon.com/SYGAV-2008-2013-Mitsubishi-Rockford-Navigation/dp/B08NVPPTR1/ref=mp_s_a_1_3?crid=H77JQ2903S9C&keywords=Mitsubishi+lancer+radio&qid=1672266525&sprefix=mits
Not sure if you have this issue, but if anyone has that 'dip' in the middle, on the top of the unit after install. It's because the clip isn't inserting itself where it needs to go, but rather under the slot. I just installed this, trying to figure out why fitment was crap. I looked at both shrouds, the OEM (top-middle) clip was slightly skinnier on the sides. So I cut some material off the clip (on the shroud provided) where it was having that 'dip' in the middle. Once I took some material off on each side, it went it easy an looks flush like OEM. No weird looking bends, dips or waves. Just thought I'd share my experience, if anyone has this issue. I'm currently working on another issue. I can't get this unit to pair with my OBD2 adapter to use the torque app. I see the adapter in settings, when trying to 'pair'. When I tap 'pair', it tries for a few seconds then the OBD2 disappears. Idk why. Going to try an order another adapter an see if that's why. But overall I'm happy with it. It's a cheap China unit but it's worlds better than the base Lancer (non-RF) unit I had. That was junk!
Thanks for sharing your tip! Very helpful information. I haven't connected my head unit to an obd reader so not sure but hopefully you get it to work. I agree, definitely makes the interior look more modern and better than stock in my opinion!
@Antony I can't remember. I believe 3. 1 on each side, and one in the middle where you see the dip. You don't need to cut the clip off entirely. Just the sides to make it skinnier to fit through the hole were it supposed to go. You can see it when you mate it together, look at the middle clip on the radio housing, then look at where it's supposed to go through. The clips too thick/wide. It'll just go under, which causes the dip. Once you trim it skinnier, it'll go through easy, an dip is corrected.
@DSM jUhnky i just done it. Now it fits better but the top still has noticeable gaps all around the top. I think its because of bad fitting frame i bought (only around $20).
You can buy the stereo here: Https://www.amazon.com/SYGAV-2008-2013-Mitsubishi-Rockford-Navigation/dp/B08NVPPTR1/ref=mp_s_a_1_3?crid=H77JQ2903S9C&keywords=Mitsubishi+lancer+radio&qid=1672266525&sprefix=mitsubishi+lancer+radio%252Caps%252C112&sr=8-3&ufe=app_do%253Aamzn1.fos.2b70bf2b-6730-4ccf-ab97-eb60747b8daf&_encoding=UTF8&tag=thejmedia-20&linkCode=ur2&linkId=e455148d0b5b43c14280c6de22f571f5&camp=1789&creative=9325
There are many different headunits out there and some with better specs cost more. I've used the $100+ headunits with 1gb rom and 16ram before and they are so slow
I made a separate video talking about how to connect OEM back up camera to aftermarket radio ruclips.net/video/KuABk66HEJ0/видео.htmlsi=xtWYVIP_ql1piGRv
It looks very clean!! I need to look into that radio for my Lancer GT but first I need to switch out the stock speakers because they're no longer good lol
Thank you! Yes definitely a simple and clean install! Love having the Bluetooth and apple car play/Android auto feature
Thank you so much for this, the only install that was detailed lol
Thank you I appreciate it! Thanks for watching and I am glad you found it helpful
2😊2😊😊223😊333322😅😅😅😅😊
❤@@TheJMedia
Had the android unit in my Lancer… was cool nut sound quality wasn’t good once I turned it up with the factory RF system. Thought about it in the Evo to have all my gauges but ended up with another pioneer. But love how the big screen updates the interior.
I agree. Definitely looks more modern and up to date with the interior. Downside is the audio quality isn't great
@@TheJMediaso the audio for this unit is good or bad?
@Khell23 it's great! Definitely an upgrade for stock
@@TheJMedia The best way to get the highest quality audio is to wire a bluetooth receiver on the AUX port, the receiver is built with a DAC aptX HD. The sound is way better than any chinese car radio that uses low-end bluetooth modules (even the most expensive ones).
Thanks for the tip!
Will it work with rockford system?
yes but you will need to order a extra harness for that
should be on amazon
Yes it will work but you will need extra harness. When you buy the headunit, make sure to specify to the seller
what about the sub in the boot
If you want to connect the sub, you'll have to connect it to the sub wire. I don't have it so didn't connect it.
@@TheJMedia cheers
@@TheJMedia how did you like the xtrons
Ok, what I want to know is how do you control the things you used to control through the MMCS headunit, like blinker flash, auto headlight sensitivity, auto wiper, remote functionality etc
All the auto headlight, auto wiper stuff is not controlled by the headunit. It's still controlled on the steering wheel column
@@TheJMedia My '08 doesn't have anything other than (mode, volume up/down and the 'channel up' and down arrows and cruise controls)
Any thoughts on how to access all that stuff with steering control or the factory headunit access ?
No idea what can be done through the obdii module other than what I can see with torque.
I'd also really love to see what you can control from your steering column because the steering wheel looks the same as mine.
@bagerklestyne You have to go to settings on the headunit to reconnect the steering wheel buttons. There is an option called "steering wheel controls" under settings
Do the volume buttons on the steering wheel still work? I’m looking for a head unit because for some reason the factory one now causes battery draw when the car isn’t running
Yes they do work. Just have to go to settings of the headunit and relink the steering wheel controls to it
what harness adaptor do you have and where did you get it?@@TheJMedia
@@danaiduma I'd like to know this too.
Wiring harness to connect OEM back up camera to headunit is also by Xtrons. Can be found on Amazon. ruclips.net/video/KuABk66HEJ0/видео.htmlsi=vYx3pfWEr3Qnlnvw
Can you run subs to the radio?
Yes you can
Have the same one, did yours short out one of the speakers?
Nope no issues at all. You might have bought a cheaper headunit with lower specs. They all look the same but they go for different price points and different specs.
I have 2011 mitsubishi lancer es, do you think i can use that device? And can you give a link, thanks
Yes it will work with any 2008 - 2017 Mitsubishi lancer.
xtrons.com/mitsubishi-android-iphone-octa-core-4gb-ram-64gb-rom-global-4g-lte-iap12lsms
Ive installed the same product on my evo x gsr 2015 but the speaker is not working, any suggestions?
It should work just fine if you connected all the wiring correctly. If you have Rockford fosgate or premium amp, you might need to connect an external an amp
I'm afraid that having the Gps antenna exposed outside that the antenna will get damage from heat. It may not be now but soon. How much difference (in terms of reception) will it make if I have the gps antenna inside or outside like you did? Thank you
I had the gps antenna outside for years on my other cars and never had any issues. I always had it out for better reception so not sure if putting it elsewhere would make reception more slow
So Mine 2015 Mitsubishi lancer S he has a back up camera. I bought a radio similar to this and I was wondering what I have to splice the back up camera wire into the original wire?
Hey, my 2015 Mitsubishi lancer came from the factory with a back up camera as well. I just had to connect all the wiring harnesses provided and back up camera works
@@TheJMedia you have another video that showed I need to buy another cable . Do I need that?
I installed everything only problem is I won't connect to the internet. Is says connected no WiFi any suggestions?
That's weird. Mine connected to Wi-Fi with no issues. Did you connect the Wi-Fi wire to the back of the headunit?
But with this install, you dont use all the speakera and do you lose the car controls for wipers, wing mirrors etc?
No, you don't lose any controls. Windshield wipers are controlled by the knob by the steering wheel and side mirror adjustments are by the door switch
Will it fit a 2017 Lancer Limited Edition and will the factory reverse camera work with this headunit?
Yes it will work
Hey, I have a problem with my new Android radio. I saw in your video that you only plugged in one of the 3 factory cables which provided power. I did the exact same thing as you but I didn't get any audio out.
After a little trouble shooting I found out that there is another factory plug that is responsible for the speakers/audio. How did you solve this now with you, please for help
I had no issues with audio. If you connected everything, it may be either wiring issue or the Android radio issue. Try contacting your seller for support
Hi, i tried to instal also a multimedia but for some reason theres no soud any suggestions? Its a rockford stereo and junsun multimedia
Make sure all your wiring is connected correctly. If you have Rockford, you might need to buy an additional amp or plug in for it. Check with your seller
I am sure the wiring is correct, but i just dont understand, the only problem is with the sound,but im not quite sure which wire belongs to the sound system, maybe you know?
@cassie_385 Sorry I don't since I don't have Rockford stereo. From what I heard, you might need to get a separate wire if you have Rockford stereo. Try contacting your seller to see if there is another wire
Does this work on a kit that was meant for 7inch double dins? I currently have a 7 inch double din with a 7 inch double din kit . So I. Was wondering can I keep the same kit when I switch to the 10 in double din
I don't think so since the size is different. Easier to just buy this headunit since it comes with the dash kit inbuilt to the headunit radio
@@TheJMedia ahhh I see thank you very much. Also may I ask where did you get your kit and radio from ?
@@SuperOwned12 No problem. This was from Amazon. Xtrons headunit
Hello, one question . It is possible to get any volume set up. Or just loud and quieter.
Yes you can go to the settings page on the headunit to adjust volume. There is also a small "+ and -" sign on the side of the headunit to adjust as well
These are nice head units. How long is the life of a radio like this? Before you notice that they start slowing down, how many years would you say?
It really depends on the ram and rom storage of the head unit. If you buy a cheaper one with 1gb RaM and 16gb rom, then it is going to be slow vs a 4gb rm and 64gb rom.
Hey was just curious , does your car have rockford fosgate, for me everything works except for the sound.
Hey, mine did not come with Rockford fosgate. It should still work just fine but you may have to connect extra wire for the amp or subwoofer possibly
I also have the RF audio package. I had a simlar issue a when I installed mine a couple of months ago. I had to connect two of the RCA connectors, I'll dig thru my email to find the solution the seller gave me.
OK, I found it. Ofcourse you have likely already connected the amp ctrl wire with your acc wire. If you haven't than go ahead and make it so. Now to the RCA connections. "AUX (L & R) IN" should be connected to "AUDIO OUT (L & R)." That had me up an running and I hope you have the same result. If you've already figured it out perhaps someone else will find this useful
Also, connect the AMP wire with the AMP CONT. You need to do this manually.
I got rid of the aftermarket big screen when I got my EVO X and put in an OEM radio into my 2011 EVO X GSR.. The same one you showed here in this video.
Oh I see. Oem touch screen one works great but navigation is pretty outdated and slow
@@TheJMedia Yes, the nav is outdated I will say, I think you can update it. But I'm really unsure, Don't see why you couldn't update the maps? I just kinda like the OEM looks., Besides I had to hotspot my phone to use google maps for the GPS. Now, the aftermarket radios you have the choice for google and or apple car play
I see. I wasn't able to update the map on the oem navigation system. My home address doesn't even show up 😅
@@TheJMedia I haven't even tried to update the map, I'm unsure how old it is. But, I guess you can go to the dealer and get an updated SD card to be used. I'm sure it will be like 200$
Oh okay I see. Good to know!
My lancer has a USB port in the glove compartment. Can it be plugged into the head unit so that I don't have to use those USB cables?
You should be able to. Never tried it so not sure
Hey im having a problem with the radio and im wondering if you know the solution .
When the car is on the screen cuts out and says “no video signal” but when I only turn the key once the the screen and audio works fine. Do you know what the problem could be?
Hey, sorry not sure what your issue might be but sounds like it is not getting power. You'll have to turn the key once to accessory mode to have radio turn on
Did you change the steering wheel?
Yes I had the steering wheel changed a few years back
Can you make a video or say how to install the backcamera wit this stereo?
I have not done that yet but I will make a video on that possibly in the future when I install a back up camera. Stay tuned!
@@TheJMedia do i need to unplug the battery before I put the stereo in?
You don't have to. I didn't but you can if you want to play it safe
@@TheJMedia how’s the sound quality? Is it really bad or good enough?
It's not great but you can add amps, subwoofer etc to make sound quality better
I have one on mines but it won’t work on Bluetooth any suggestions like it connects but the only thing it plays is a song that the system already has downloaded by maddona😂
It should work just fine. Sounds like music is playing so sound works but maybe check to make sure that your phone has been connected to the headunit and make sure that phone and headunit settings are working good?
What website did you get it from?
You can buy it from here:
Https://www.amazon.com/SYGAV-2008-2013-Mitsubishi-Rockford-Navigation/dp/B08NVPPTR1/ref=mp_s_a_1_3?crid=H77JQ2903S9C&keywords=Mitsubishi+lancer+radio&qid=1672266525&sprefix=mits
Hey bro where did u get the screen from??
I have the Xtrons headunit. You can buy it off Amazon
anyone know if this works on the gts model?
Yes it will work on a gts
@@TheJMedia thank you man i appreciate it also you have any idea if i can use it with my iphone but wired? not wireless
@lukeevans7598 Yes I'm pretty sure it will work just fine wired too. Just need to connect your phone via USB cable
What brand of this the double din?
It is the Xtrons double din for the Mitsubishi lancer. 4g ram + 64gb rom
How do you adjust the bass and treble with this?
You can click on settings. Bass and treble adjustments would be under audio settings
where did u get this screen
Got it from Xtrons
Whats the screen size?
I believe about 10"
Will it fit in “10 lancer es?
Yes it will fit any 2008 to 2017 lancers
Not sure if you have this issue, but if anyone has that 'dip' in the middle, on the top of the unit after install. It's because the clip isn't inserting itself where it needs to go, but rather under the slot.
I just installed this, trying to figure out why fitment was crap. I looked at both shrouds, the OEM (top-middle) clip was slightly skinnier on the sides. So I cut some material off the clip (on the shroud provided) where it was having that 'dip' in the middle. Once I took some material off on each side, it went it easy an looks flush like OEM. No weird looking bends, dips or waves. Just thought I'd share my experience, if anyone has this issue.
I'm currently working on another issue. I can't get this unit to pair with my OBD2 adapter to use the torque app. I see the adapter in settings, when trying to 'pair'. When I tap 'pair', it tries for a few seconds then the OBD2 disappears. Idk why.
Going to try an order another adapter an see if that's why. But overall I'm happy with it. It's a cheap China unit but it's worlds better than the base Lancer (non-RF) unit I had. That was junk!
Thanks for sharing your tip! Very helpful information. I haven't connected my head unit to an obd reader so not sure but hopefully you get it to work. I agree, definitely makes the interior look more modern and better than stock in my opinion!
I cant figure out which clip to cut. Theres 4 in the top right?
@Antony I can't remember. I believe 3. 1 on each side, and one in the middle where you see the dip. You don't need to cut the clip off entirely. Just the sides to make it skinnier to fit through the hole were it supposed to go. You can see it when you mate it together, look at the middle clip on the radio housing, then look at where it's supposed to go through. The clips too thick/wide. It'll just go under, which causes the dip. Once you trim it skinnier, it'll go through easy, an dip is corrected.
@DSM jUhnky ah great thanks. I'll try that tomorrow.
@DSM jUhnky i just done it. Now it fits better but the top still has noticeable gaps all around the top. I think its because of bad fitting frame i bought (only around $20).
What do you think of the Tesla style lancer headset unit?
Those are cool but I think these flow better with the interior. Tesla one a little too big for my liking
Steering wheel controls work???
Yes they work! Just need to link the headunit to the steering wheel controls to relearn it by clicking on steering wheel control settings
Link?
You can buy the stereo here:
Https://www.amazon.com/SYGAV-2008-2013-Mitsubishi-Rockford-Navigation/dp/B08NVPPTR1/ref=mp_s_a_1_3?crid=H77JQ2903S9C&keywords=Mitsubishi+lancer+radio&qid=1672266525&sprefix=mitsubishi+lancer+radio%252Caps%252C112&sr=8-3&ufe=app_do%253Aamzn1.fos.2b70bf2b-6730-4ccf-ab97-eb60747b8daf&_encoding=UTF8&tag=thejmedia-20&linkCode=ur2&linkId=e455148d0b5b43c14280c6de22f571f5&camp=1789&creative=9325
$400 U CRAZY ITS $130 MAX
There are many different headunits out there and some with better specs cost more. I've used the $100+ headunits with 1gb rom and 16ram before and they are so slow
What deck is this? Your links broken
Here is the updated link for the radio: Mitsubishi lancer radio
What brand is it?
You can buy it here: www.amazon.com/XTRONS-Mitsubishi-Android-Navigation-Bluetooth/dp/B0B4JYLPBL/ref=mp_s_a_1_3?crid=13CQK3LCV6FJU&key
How do you connected reverse camera?
I made a separate video talking about how to connect OEM back up camera to aftermarket radio
ruclips.net/video/KuABk66HEJ0/видео.htmlsi=xtWYVIP_ql1piGRv