As a 63yr old experienced welder, I strongly suggest you guys start covering your skin when welding. You don't notice the damage until it becomes skin cancer. The UV radiation from welding is very damaging even if you don't feel it burning. You will blink one day and discover you are old and all these small things really add up! Old welders always cover up, even when it's hot and uncomfortable, for a very important reason.
@@agentcrm - mate, you can’t tell people till it’s too late and they say, ‘well, I should’ve covered up when I was a young fella.’ We have RUclipsrs in Australia copping flack from Boilermakers all the time about proper PPE use and the dangers of intense UV on the skin. Especially in America where the health system charges like a wounded bill when you get sick, injured or get cancer. Surprised no one said more about walking purlins across beams without fall restraints. More than 2 metres and you’re dead.
@@DiscoFang - like any sunscreen, cover is best rather than a lotion applied topographically. High SPF sunscreen can have some ability to block some of the wavelengths of UV.
You guys did an awesome job mentoring Will. He's come sooo far in the past few builds. He's soaking up the knowledge you feed him and runs with it. GREAT job Will you're killin it kid!!
I was thinking the same thing. Well said. I like to learn and watching him make decisions and do the work reminds everyone that giving things a go and making a few mistakes is what makes an expert.
Oh for sure! I've been thinking that while watching the whole thing. He's learning, he's eager and asking questions and learning from his "learning experiences" proper. It really shows that he's putting in effort. I can't wait to see this thing roast the rear tire or cruise to town 😂 I'm so stoked for this!
@@stevenmcmorn3534 I know. So irritating. If everybody started calling their turds gold tomorrow it wouldn't make them anything but turds. Will is an annoying idiot. If I didn't like the s*** that Ethan build so much I would unsubscribe. If I have to hear shrekt or swindled one more f****** time I actually might.
@joshm8661 I see Josh in those vids but I remember him as road tripping old cars all over, busted knuckle looks like extreme motorsports and I don't see any road trips ...
Love that ya'll let Will go crazy with the other builds and this one was much more of a teaching experi3nce for him, getting him thinking and doing in a more controlled, intentional and professional way. Shows he really has the potential to become the second builder of the crew
Edwin is outstanding at both putting this footage together - which is always way more work than you'd think - and FPV flying his drones. OK he has the occasional crash, but with the tight spaces he flies through at speed, that's always going to happen.
@@TrevorDennis100 when you fly like he does, you're bound to have a few bumps, scrapes and accidents along the way, he makes me borderline dizzy with some of his moves, I'm always impressed with his amount of control! Any good hobby or craft comes with it's learning experiences for sure.
@@mowler8042 his names Josh he's been on Hoonigan with his LS Hilux he's been on here with the bronco eBay build he has been on vice grip garage and many other places ...
Will did amazing and it was great seeing Josh teach him some things, he’s such a good dude and I look forward to why Josh is hanging around the GH shop!
Guys I have an idea. I talked a little to Edwin about my little old coast to coast lawnmower. I was pedaling around at the festival when I saw him with who I think was his mom, hopefully he remembers me. Anyway I’m trying to make the lawnmower into something kinda like you guys did with the 2jz lawnmower. But because I’m 16 I don’t really have the money for it. My idea is what if I make a video of me fixing it up and making it way faster than a 50 year old lawnmower should ever be, all I ask is that you “sponsor” me. Then I send the video to you guys. I’m not real good with video editing so you might have to do that. I could also let you guys borrow it for a while or drive it up there. Think about it. Thanks -Odin
I think this shows how much fun little power can be. I know why people like adding more power to everything but sometimes just enough power can be a blast too.
Been watching you guys since 50k subs. Ya'll have been making such quality videos since the beginning. Keep up the good work. And could you bring back some of the old beats that you used to make and put in the videos? That would be premium.
How is Grind Hard even going to work in a shiny new garage?! These types of builds are perfect for that grungy little garage, I hope you all keep doing projects in it.
Not only do i love seeing the young guys learning, i especially like seeing the older guys mentor and instruct! 👏👏👏 great work you guys, the younger generation can't be expected to figure it all out on their own. 👍
Will is a goddamn king. Seriously the first youtube person i'd be down to just hang with. Your energy, Will, is the rarest of all resources in the world, good, and bad (that said don't die in an accident plz)
Damn man! Running a wire wheel without safety glasses. I look at those things and get wires sticking out of my face, hands, arms. Lol. Do what you do but even safety squints can get pierced by those little wires. ✌🏼
As a big bike rider who just got back into it after 25 years I feel like a newbie again, because I am. So, I bought a Yamaha Vino 125 scooter to get around town and I'm ADDICTED. I think I might like scooters more than big bikes, just like I love air rifles way moe than powder burners. EDIT : I've seen that BMW "cruck" in another video and I love it.
The transition of Will driving off in the yute to suddenly being in a crisp, clean collared GHPC shirt is hilarious to me. Long live well dressed swindle willie
My guy with the cowboy hat is very knowledgeable and also seems like a great teacher not over bearing and let's you learn how to do something while watching over offering guidance. You can learn alot from him if you so wish to
I love my simplisafe system. Only issue I have had was my cat sets off a motion detector every now and then. I have had to let them know what it was. No need for the police to come. Also really like that when you go on the website you are able to put certain information in too help first responders to a situation, my animals, firearms and level in the home. Awesome
I’ve been wanting to do the same thing to my bike for years. That is freaking awesome. Can’t wait to see it finished don’t kill yourself. I think it’s gonna be fast.
My friends dad had a 2007 CBR 1000rr and those things are quick. He dented his tank in to do wheelies and burnouts. He one day was riding by me on his tank doing a wheelie at 150 kmph, it was cool ASF
Absolutely cannot wait for the next video!! That thing is going to be sick!!! And it fits the part because people love to do the super extended swing arms and stuff already with the ruckus!
I was watching the woodsmen tv series last night and almost fell over when I realized Ethan was on the show building his badass tree house. I’ve been a sub for a lot of years and never realized he was on the show and I have watched it before 😂
I tried the whole take a shot when he says premium and I've already gone through a bottle of tequila. Seeing how I'm only halfway through this. I should be in the hospital by the end of this video.
I seen a Honda ruckus on RUclips with a cbr600cc engine.. never seen one with a 1000cc yet….. strong 💪 man love watching you guys build those cars and other vehicles.looks sick I need one
You should take the factory gas tank cut the bottom out ,and put a filler plate halfway up into the tank. then you could set it over the intake to cover it, and it would still hold some fuel.
It’s really nice to see will taking things a bit more seriously. The shopping cart and go kart builds felt more like filler episodes but this is really coming along! Will well done dude! Watching your skills develop has been really nice to see
As a 63yr old experienced welder, I strongly suggest you guys start covering your skin when welding. You don't notice the damage until it becomes skin cancer. The UV radiation from welding is very damaging even if you don't feel it burning. You will blink one day and discover you are old and all these small things really add up! Old welders always cover up, even when it's hot and uncomfortable, for a very important reason.
I work in a fabrication shop and this is important. More than young fellas realise.
It's something that annoys me all the time on youtube. There's only a few channels I watch where people bother coving up.
@@agentcrm - mate, you can’t tell people till it’s too late and they say, ‘well, I should’ve covered up when I was a young fella.’ We have RUclipsrs in Australia copping flack from Boilermakers all the time about proper PPE use and the dangers of intense UV on the skin.
Especially in America where the health system charges like a wounded bill when you get sick, injured or get cancer.
Surprised no one said more about walking purlins across beams without fall restraints. More than 2 metres and you’re dead.
Does sunscreen block the relevant UV freqs?
@@DiscoFang - like any sunscreen, cover is best rather than a lotion applied topographically.
High SPF sunscreen can have some ability to block some of the wavelengths of UV.
You guys did an awesome job mentoring Will. He's come sooo far in the past few builds. He's soaking up the knowledge you feed him and runs with it. GREAT job Will you're killin it kid!!
I was thinking the same thing. Well said. I like to learn and watching him make decisions and do the work reminds everyone that giving things a go and making a few mistakes is what makes an expert.
0
0p
Odds we get DJ Khaled to drive this when its done?
High. And he'll ride Another One
Make sure that the throttle sticks and aim it toward a wall if he does🤔🤫👍🫣🤣🤣🤣
“Tell ‘em to bring out the CBR 1000 ruckus”
Maybe 6 or 9%
That's funny
Man, Will sure has come into his own over the last couple months. Really enjoying watching him build all this premium stuff!
Oh for sure! I've been thinking that while watching the whole thing. He's learning, he's eager and asking questions and learning from his "learning experiences" proper. It really shows that he's putting in effort. I can't wait to see this thing roast the rear tire or cruise to town 😂 I'm so stoked for this!
Do you know what premium means there stuff definitely is not premium it may be very cool but not premium look up a word don't just use it.
@@stevenmcmorn3534 I know. So irritating. If everybody started calling their turds gold tomorrow it wouldn't make them anything but turds. Will is an annoying idiot. If I didn't like the s*** that Ethan build so much I would unsubscribe. If I have to hear shrekt or swindled one more f****** time I actually might.
It’s premium. Your brain is not premium because of all that premium brake fluid you’ve been drinking.
Got me laughing 😂😂
Will is killing it, swindle level is off the charts
I'm really enjoying the 'Will and Edwin unsupervised' builds.
Will is creating some monster creations lately, love it!
The amount of love the grind hard community has for Will is awesome. His personality is infectious, and we all want him to succeed
Should make a Ruckus powered wheelbarrow with the drivetrain.
Now that would be awesome 😎
I dig this or something like it lol
That whistle was so chill😩
One thing I learned while watching Edwin and Will today ... I never question the engineering integrity of Ethan's work.
I never thought I'd see Josh hanging with the boys. He's pretty fun and does wild builds just like the grind hard crew.
hes been before. was stoked to see him here. that means him and Ethan are up to something Fuqin AWESOME!!!!
@DrivinghardOregon lol yea, you know they have something in the works that's gonna be wild.
Help! Can't remember Josh's channel name
@@k_the_v busted knuckle or vague industry's I think
@joshm8661 I see Josh in those vids but I remember him as road tripping old cars all over, busted knuckle looks like extreme motorsports and I don't see any road trips ...
Love that ya'll let Will go crazy with the other builds and this one was much more of a teaching experi3nce for him, getting him thinking and doing in a more controlled, intentional and professional way. Shows he really has the potential to become the second builder of the crew
I've never heard the word premium so much in my life until I watched this video
The editing/drone film is always top notch! I bet it's more time consuming than working on these builds, but the end result is always superb. 👍
These videos are always top notch, I don't know how they do it
It's premium 😎
Edwin is outstanding at both putting this footage together - which is always way more work than you'd think - and FPV flying his drones. OK he has the occasional crash, but with the tight spaces he flies through at speed, that's always going to happen.
@@TrevorDennis100 when you fly like he does, you're bound to have a few bumps, scrapes and accidents along the way, he makes me borderline dizzy with some of his moves, I'm always impressed with his amount of control! Any good hobby or craft comes with it's learning experiences for sure.
Fabrication cowboy just hanging out and helping will is amazing nice to see him back visiting and another awesome build boys
who is the fabrication cowboy, sure I've seen him before?
@@mowler8042 his names Josh he's been on Hoonigan with his LS Hilux he's been on here with the bronco eBay build he has been on vice grip garage and many other places ...
@@mowler8042 he's also got his own show to I believe
Will did amazing and it was great seeing Josh teach him some things, he’s such a good dude and I look forward to why Josh is hanging around the GH shop!
Just ran into Will at the Winco in CDA! Made my day to say hello. Thanks for all the great content. Long time fan.
Guys I have an idea. I talked a little to Edwin about my little old coast to coast lawnmower. I was pedaling around at the festival when I saw him with who I think was his mom, hopefully he remembers me. Anyway I’m trying to make the lawnmower into something kinda like you guys did with the 2jz lawnmower. But because I’m 16 I don’t really have the money for it. My idea is what if I make a video of me fixing it up and making it way faster than a 50 year old lawnmower should ever be, all I ask is that you “sponsor” me. Then I send the video to you guys. I’m not real good with video editing so you might have to do that. I could also let you guys borrow it for a while or drive it up there. Think about it. Thanks -Odin
18:05 I don't need NOS, I just need a bean burrito🔥💨
I think this shows how much fun little power can be. I know why people like adding more power to everything but sometimes just enough power can be a blast too.
It’s really heartwarming to see you guys mentoring Will to become a craftsman. His skill set is improving with every video. Love your work! 😍
Love to see you guys bringing Will along. Get it, Will.
Guys u're the best. It's a genius idea. Very pretty cool stills.
And very very awesome views, the forest is beautiful
You guys have gone full circle. It reminds me of the old snowmobile scooter!
Josh being the patient Uncle was worth watching. Will has come far!
You guys always do the sickest builds. Absolutely love it 🔥🔥🔥🔥
"It's not that heavy, it's just a little awkward" relatable
Will really set up the bar high on this one. Proud of you kid!
recipe for self deletion: Take a shot every time dude bro says premium
Been watching you guys since 50k subs. Ya'll have been making such quality videos since the beginning. Keep up the good work.
And could you bring back some of the old beats that you used to make and put in the videos? That would be premium.
I have a cbr1000 and that is WHY I needed to watch this. That bike is a beast.
We need a premium counter when wills in the shop lol. Keep up the good work guys!
How is Grind Hard even going to work in a shiny new garage?!
These types of builds are perfect for that grungy little garage, I hope you all keep doing projects in it.
I'm afraid that the new shop build may not have as much "shade-tree, back-alley success" vibe. The lil Shop IS character.
Freaking love how knowledgeable and capable Ethan is shop's looking great love the projects keep it up guys
Not only do i love seeing the young guys learning, i especially like seeing the older guys mentor and instruct! 👏👏👏 great work you guys, the younger generation can't be expected to figure it all out on their own. 👍
I'm lovin all of Will's chaotic builds they are sick!! I think we need some more of cowboy hat guy
The amount of enjoyment my fellow Will brings me as well as the rest of the crew of this channel is immense.
Will is definitely learning, and he's getting better, Atta bi's teaching the young lads 🍻
Will is a goddamn king. Seriously the first youtube person i'd be down to just hang with. Your energy, Will, is the rarest of all resources in the world, good, and bad (that said don't die in an accident plz)
awesome video guys. just wanted to let you guys know the ruckus is a 50cc not a 125 lol My dad owns one
You can use a much smaller sprocket in the rear as the tire is already smaller than a regular bike.
Will killed it. It has the potential to look almost like a factory built insane thing! It all just works
I say Will should have to do push-ups every time he says premium 😂
Or a punch in the bollocks😂
it has that
it's gonna kill me can't wait to drive it
energy
Damn man! Running a wire wheel without safety glasses. I look at those things and get wires sticking out of my face, hands, arms. Lol. Do what you do but even safety squints can get pierced by those little wires. ✌🏼
Deffo don't recommend it engineer by trade and I wear them at home too 😂✌️
Man this video sure simplyed my safe
As a big bike rider who just got back into it after 25 years I feel like a newbie again, because I am. So, I bought a Yamaha Vino 125 scooter to get around town and I'm ADDICTED. I think I might like scooters more than big bikes, just like I love air rifles way moe than powder burners. EDIT : I've seen that BMW "cruck" in another video and I love it.
The transition of Will driving off in the yute to suddenly being in a crisp, clean collared GHPC shirt is hilarious to me. Long live well dressed swindle willie
I love how Josh just shows up and immediately begins to help.
Hi from the UK. That actually looks pretty cool. I Look forwards to seeing it run. Thanks for sharing
My guy with the cowboy hat is very knowledgeable and also seems like a great teacher not over bearing and let's you learn how to do something while watching over offering guidance. You can learn alot from him if you so wish to
So awesome to see Mr. Mazzerole visiting / collabing with Y'all.
"dude the motor is bigger than the ruckus"
"that's why it's premium"😂😂
Great job Will. It’s great to see how Ethan is encouraging and training
I love my simplisafe system. Only issue I have had was my cat sets off a motion detector every now and then. I have had to let them know what it was. No need for the police to come. Also really like that when you go on the website you are able to put certain information in too help first responders to a situation, my animals, firearms and level in the home. Awesome
I’ve been wanting to do the same thing to my bike for years. That is freaking awesome. Can’t wait to see it finished don’t kill yourself. I think it’s gonna be fast.
Will is definitely one of my favorite people. Just seems like such a genuine good person
My friends dad had a 2007 CBR 1000rr and those things are quick. He dented his tank in to do wheelies and burnouts. He one day was riding by me on his tank doing a wheelie at 150 kmph, it was cool ASF
Man Its so cool Will end up building the most epic machines!! Love that guy!!
drinking game: take a shot every time he says premium
RUclipsr viewers love Grindhard madness. Just stay safe guys. Safety first.
Great job Will, it looks amazing!
Good to see Will embracing the Year of the Flamingo
Im looking forward to see the finish product . As a guy that loves working on scooters and making them faster this build really excites me .
Good job Will. Those push-ups or paying off😂
That's really cool
Can't wait to see it all painted up.
Beautiful
Great job building
Premium 👍❤️👍
I suggested you guys do this like 4 yrs ago. If not longer. I'm so happy rn!
Absolutely cannot wait for the next video!! That thing is going to be sick!!! And it fits the part because people love to do the super extended swing arms and stuff already with the ruckus!
I was watching the woodsmen tv series last night and almost fell over when I realized Ethan was on the show building his badass tree house. I’ve been a sub for a lot of years and never realized he was on the show and I have watched it before 😂
Good job will , that rear tire is going to have nothing left of it within the first minute ! Shred !!
Will is really improving his skills FAST
Good start , hope to see it finished soon! Then you guys can test it out!
Great job on the video folks! Thanks for making it.
I just appreciate the cluster mess that is your art studio and the projects y’all conjure. Thanks for the videos.
I tried the whole take a shot when he says premium and I've already gone through a bottle of tequila. Seeing how I'm only halfway through this. I should be in the hospital by the end of this video.
I seen a Honda ruckus on RUclips with a cbr600cc engine.. never seen one with a 1000cc yet….. strong 💪 man love watching you guys build those cars and other vehicles.looks sick I need one
I’m proud of Will mainly because he kept his phone in his front pocket for an entire video!
You should take the factory gas tank cut the bottom out ,and put a filler plate halfway up into the tank. then you could set it over the intake to cover it, and it would still hold some fuel.
Ethan IS a forklift!
"The Herniator"
Should totally turn this into Kanedas bike from Akira!
Will needs to bring this thing to the next cars and coffee
Much respect to will you’ve come a long way ! And this is going to be one sick ass build, the ruckus death trap👍🏼🤩🫡❤️
Y’all, give my boy Will sum credit!!! Dat boy good 💪🏾🤝🏾
It’s really nice to see will taking things a bit more seriously. The shopping cart and go kart builds felt more like filler episodes but this is really coming along!
Will well done dude! Watching your skills develop has been really nice to see
Will is definitely a credit to this channel… these side mutant projects are the best!!
Sweet sweet sweet and sour chicken! You got me on ruckus POWA!! Lol 👌💯😬
Y'all need to build a Rokon!
Your channel is awesome, Thank you for providing this content!
My jaw dropped when I saw this thumbnail😂😂
While you and Will were over there debating, Ethan just picks it up like a beast. 14:00
Good to see will improving on his fab skills. Keep on going dude!!
Yall seem cool af I'd feel blessed just having dudes like u as fellow dudes tearing stuff up
Hello from India 🇮🇳🇮🇳
Big Fan of your videos
I’m belatedly older than will and I’m so damn proud of him right now
Yo sooper scooter level 1000!!!!!😂
Awesome!
Maybe at some later stage.... fit a slick and wheelie bar setup and go drag racing?! 🙏👍
The Ruckus is fucking legend. I kept it under 50cc on principle and we have achieved great things together.
I am seeing Josh show up on all the channels I watch. He sure gets around.
35:17 you should put a bar that goes up above the rear wheel and back 6-8 inches so you can pull the jet boat around with the ruckus