Again I raise my hat off to you. You doing very well. As far as I know you are using a combination of tools for DR. Right? 1.) MRTLAB Ultra 2.) PC3000 from ACELab 3.) DFL-SRP from Dolphin Data Lab Can you tell us about you experience with those products, which is better for this and which is better for that? What about performance (read/write-speed) and can you build the hardware in one/two lab-PCs or do you need for each product a separate PC? Questions, about questions and I hope you like to answer them and love to hear more technical details. Well did you ever think about for helping remote sessions?
Educational, to the point and with granular detail that is really engaging. A great video. Keep up the regular posting - I hope your subscriber count and viewership really increases as you really are a pioneer in educating people in the intricacies of data recovery and the ever increasing necessity in backing up data. Thank you for your efforts.
Hi, sorry but in conclusion what is Imaging?? can we say that Imaging = repairing bad sectors on a HDD, or Imaging = recovering data from a failing HDD and putting them on a different HDD ?? is it different from making a disc Image wih soft like Acronis?? can we jump into Imaging with only 1 HDD to fix bad sectors?? Thx
It would be nice to have more software recoveries to watch and understad. So you use more than one software depending what you need to recover. The PS 3000 is expensive but I'll get the smallest one 2 channels, just to start. Nice Video ;)
Hi, your tutorials are the best on internet! I have a question: I folled your steps, I am using MRT Pro Express and I was unable to do a Head Map for my WD7500BPKT, do you know why? Thank you so much!
Hello, I know this is not place for stupid questions, but internet is dumb today, and you most know the answer by head. I have an ST2000LM015 (2.5 Barracuda 2TB), does this drive support some sort of low power spinup, like WD drives do by setting a jumper? Thank You! Also keep up the good work, I like the videos!
This all seems like great information but I wish there were maybe some edited zooming and/or panning to where the mouse is while you are choosing an option since it is quite difficult to see where you are clicking. Thank you either way.
I am very new to screen capture, and my monitor for MRT is also ultra wide ratio, I've been meaning to switch it to a regular ratio so I can cap at regular 1080
HDD Recovery Services I understand, do what you can for the time being. Your data recovery seems very intriguing and the editing does not take away from your skill but just from a viewing perspective makes it a bit hard to take everything in. Thanks for the reply I hope to be able to do this type of work some time and I'll check here for advice and guidance.
So how does MRTLAB Ultra read the service area via the sata connector? It knows some secret cmd to send? I know Seagates and their system area can be read through the special diag serial port, but doing it via sata would be easier. Answer is its a secret that only mrtlab and a few others know...
My lenovo E430 screen shows " A disk need error occured Press Crtl+Alt+Del to restart". I had done several time, but same msg shows. How to fix it. Pl. help me. Bad sector shows #3740
I have had the MRT ultra for 6 months but have not yet had any issues imaging channel to channel. I typically only use two channels at once, perhaps the issue would happen if I used all 4 channels at the same time.
Yes. I only use two channels so I uncheck ATA2 and ATA3 (keep ATA0 and ATA1 checked of course) when the "please select interface" windows pops up. I read somewhere that the MRT Ultra although designed for four channels it doesn't work well when using all 4 channels at the same time so I only use all four when I really need to. If you continue to get errors using ATA0 and ATA1, try ATA2 and ATA3 only to see if they work better. Hopefully there is no issue with your MRT card. If you ever want to log onto mine to see if my MRT Ultra behaves differently just let me know and I can contact you and grant you access through TeamViewer if you like. Appreciate the great videos by the way.
Loving the new daily uploads Erkin, your channel is by far the most helpful and I find it interesting to watch :)
Thank you!
Again I raise my hat off to you. You doing very well.
As far as I know you are using a combination of tools for DR. Right?
1.) MRTLAB Ultra
2.) PC3000 from ACELab
3.) DFL-SRP from Dolphin Data Lab
Can you tell us about you experience with those products, which is better for this and which is better for that?
What about performance (read/write-speed) and can you build the hardware in one/two lab-PCs or do you need for each product a separate PC?
Questions, about questions and I hope you like to answer them and love to hear more technical details.
Well did you ever think about for helping remote sessions?
Erkin the work you do shows your dedication towards your profession the best data recovery specialist. Thank you for sharing info for all of us...
Educational, to the point and with granular detail that is really engaging. A great video. Keep up the regular posting - I hope your subscriber count and viewership really increases as you really are a pioneer in educating people in the intricacies of data recovery and the ever increasing necessity in backing up data. Thank you for your efforts.
Glad to see the MRT Ultra being used by a serious data recovery business.
Hi, sorry but in conclusion what is Imaging?? can we say that Imaging = repairing bad sectors on a HDD, or Imaging = recovering data from a failing HDD and putting them on a different HDD ??
is it different from making a disc Image wih soft like Acronis??
can we jump into Imaging with only 1 HDD to fix bad sectors??
Thx
It would be nice to have more software recoveries to watch and understad.
So you use more than one software depending what you need to recover.
The PS 3000 is expensive but I'll get the smallest one 2 channels, just to start.
Nice Video ;)
this will happen rather sooner than later
Another awesome video! Keep up the great work man!
Good Job, waiting more about enviroment and tools especially the laminar cabinet practical advices since you have more than one model.
Keep up the daily videos man!
Hi, your tutorials are the best on internet! I have a question: I folled your steps, I am using MRT Pro Express and I was unable to do a Head Map for my WD7500BPKT, do you know why? Thank you so much!
My drive has over 69000 hours on it. It has 744 reallocated sectors.
MRT Labs websites seem to be down. Have you heard if they have gone out of business?
Hi, I am getting lot of bad sectors while imaging the Toshiba HDD. Please suggest. Head0 is reading lot of Bad sectors.
Hello, I know this is not place for stupid questions, but internet is dumb today, and you most know the answer by head. I have an ST2000LM015 (2.5 Barracuda 2TB), does this drive support some sort of low power spinup, like WD drives do by setting a jumper? Thank You!
Also keep up the good work, I like the videos!
I want to start data recovery lab, and I am looking to buying data recovery equipment, can you suggest any equipment which I can buy.
This all seems like great information but I wish there were maybe some edited zooming and/or panning to where the mouse is while you are choosing an option since it is quite difficult to see where you are clicking. Thank you either way.
I am very new to screen capture, and my monitor for MRT is also ultra wide ratio, I've been meaning to switch it to a regular ratio so I can cap at regular 1080
HDD Recovery Services I understand, do what you can for the time being. Your data recovery seems very intriguing and the editing does not take away from your skill but just from a viewing perspective makes it a bit hard to take everything in. Thanks for the reply I hope to be able to do this type of work some time and I'll check here for advice and guidance.
Love your videos, can you do the PC3000 Version of this tools please.
What don't need head replacement if red blok
je kiffe tes vidéos merci, I like your videos very much thanxxxxx so helpfull
So how does MRTLAB Ultra read the service area via the sata connector? It knows some secret cmd to send? I know Seagates and their system area can be read through the special diag serial port, but doing it via sata would be easier. Answer is its a secret that only mrtlab and a few others know...
6:30-7:30 well said bro 😃
Thanks Andy
Very helpful, thanks...
What's the name of the tool
i m unable to recover my seagate hdd with lot of bad secotrs can u help me to recover
SIR HI....
give me a solution
which one is better dfl or mrt
Are you going to finish Lexar Professional 1000x?
I'll add it in the next video
My lenovo E430 screen shows " A disk need error occured
Press Crtl+Alt+Del to restart".
I had done several time, but same msg shows. How to fix it. Pl. help me. Bad sector shows #3740
Suggest the Best Data Recovery Tools
I'm looking into this software you are using and it cost around 4 grand. wow.
thats considered cheap
Thanks brother
Hi, why are you using MRT so much? Do you switch from PC3000 to MRT?
MRT is what I have in the laminar flow cabinet, so it's easy I don't have to adjust settings for light on camera.
My Seagate 250 gb hard drive not work what problem
I need to get my data out of my phone and it's a ( Note4 ) all I need is tools . Is there any way to call you or buying from you
contact us on Facebook and we will advise you.
that good
hi sir i am sorif from dhaka bangladesh i need yourhelp
nice
What is the name of that hot-swap drive bay that you're using at 3:02?
That HP workstation comes with them from factory
I have had the MRT ultra for 6 months but have not yet had any issues imaging channel to channel. I typically only use two channels at once, perhaps the issue would happen if I used all 4 channels at the same time.
Don Jagoe you mean when software starts? And you select how many channels you want to include?
Yes. I only use two channels so I uncheck ATA2 and ATA3 (keep ATA0 and ATA1 checked of course) when the "please select interface" windows pops up. I read somewhere that the MRT Ultra although designed for four channels it doesn't work well when using all 4 channels at the same time so I only use all four when I really need to. If you continue to get errors using ATA0 and ATA1, try ATA2 and ATA3 only to see if they work better. Hopefully there is no issue with your MRT card. If you ever want to log onto mine to see if my MRT Ultra behaves differently just let me know and I can contact you and grant you access through TeamViewer if you like. Appreciate the great videos by the way.
what software you use ?
Francesco Lombardo I use a lot of different ones
Hi
6666 views while I am watching.
Your what up no ?
on the lighter note i am the third one to comment haa haa
:)
Well i have some inputs on this behaviour of MRT .I will make a Video And Post On My Channel For You .Its Amazing You Come Up With This Question ,
Great, drop a link here so other can see too
it really seems to be intermittent issue. Video I did yesterday for cuda LP had no issues getting to the terminal