How to install a red dot optic on a CZ Shadow 2

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 20

  • @alfredocuomo1546
    @alfredocuomo1546 2 года назад

    Most of these plates only have between two & three tread engagement on the screws so steel would be my choice for the plate, also since there is no back relief screw length is critical. The other concern would be the Galvanic corrosion between the Steel screw & the Aluminum plate not to mention the effect of the additional weight added to the slide & the selection of the recoil spring. I would most likely by a new optics ready slide from CZ for my Shadow2 if I wanted a red dot on it.

  • @nicholascohen852
    @nicholascohen852 2 года назад +2

    I ordered both mounts for my Shadow 2 and expected to receive a set of instructions, as presented in this video. Neither of them came with mounting instructions. Where can I obtain these?

  • @michaeltroster9059
    @michaeltroster9059 Год назад

    My mounting plate did not come with a diagram as where to place the pins. Also the pins were steel, not nylon.Are the pins necessary,because when I put them in The sight was tilted and I could not not adjust the site as it shot too low. Very confusing . Poor packaging with no instructions.

  • @turijdragonfly
    @turijdragonfly 10 месяцев назад

    Salve,la piastra a coda di rondine ,ho quella della Glock e quella per 1911 e he capa, e'compatibili una di queste due per cz S2?

  • @JamesBreitenstein
    @JamesBreitenstein 3 года назад +2

    does work with the ASG Airsoft Shadow 2 as well?

    • @HashtagDeebz
      @HashtagDeebz 3 года назад +1

      im wondering the same thing. did u ever get an answer elsewhere?

  • @allidsarebusy
    @allidsarebusy 3 года назад

    Why do you need those plugs on it?

  • @speroskoufis7505
    @speroskoufis7505 3 года назад +1

    If my shadow 2 is not "optics ready" am I still able to use the vortex venom?

    • @r4ym1n13
      @r4ym1n13 Год назад

      Mines is not optics ready either. Did you install an optic yet ? How so

    • @justinrichards296
      @justinrichards296 Год назад

      I'm here for the same question as well. It seems the best options are buy just the optics ready slide from cz or take your current one to a gun shop and have them mill it.

    • @r4ym1n13
      @r4ym1n13 Год назад

      @@justinrichards296 That's what I believe as well

    • @coleshelton6469
      @coleshelton6469 Год назад

      There are mounts for standard non-OR shadow 2’s

    • @coleshelton6469
      @coleshelton6469 Год назад

      That’s the steel version…there’s others but that one worked well. Although they sold out of steel versions for for other red dot brands. Turns out I quite like the RMS

  • @stormynightsinapril
    @stormynightsinapril 3 года назад

    I have a gap between the slide and the bottom of the adapter plate.....Is this normal. Do I need shims? 5-1-2021 please reply

  • @dariobelarmino5035
    @dariobelarmino5035 4 года назад

    I was trying to order these online the price states 65AUD which around $45USD as i was about to pay the price still remains $65. How much is it actually for U.S. buyers. Would like to try these for my shadow 2 but wondering if you can do something about the price and shipping. Thanks.

  • @alfonsoroma4930
    @alfonsoroma4930 4 года назад +1

    Have you run it?

  • @wmw2222
    @wmw2222 Год назад

    15 seconds showing us how *not* to file it and 0 seconds showing how to file it properly. No time was spent showing how to properly hammer the mount properly. How are these omissions not obvious to the video creator?

  • @andrewditommaso8407
    @andrewditommaso8407 9 месяцев назад

    File a new part?!?!?!
    An aluminum.
    No thanks

  • @chippooutdoors5325
    @chippooutdoors5325 Месяц назад

    you show people and then say dont do what we just did and then you contiue the wrong way
    good luck with your new company