It's more just the Arrma 8th scale platform that's my favorite bashers. Not just because arrma builds awesome rigs. It's because of the overwhelming aftermarket support that makes them so incredibly.
Like seeing how others upgrade their RC compared to me. I’m scouring the internet for Typhon upgrades and most are getting basher chassis, braces, and shock towers. I’m speed running my car so I’m looking for weight savings and drive train efficiency parts. I went with carbon fiber shock towers, ceramic bearing kit, and a tire balancer. I would like some milled out drive cups and titanium tie rods and pillow balls next.
@@fxrc3086 I haven’t found a chassis that weighs less than the stock chassis. I have the V5 and it is strong enough for speed runs. Whom ever wants to make a molded CF V5 chassis for the Typhon can take my money.
@@TKO593 a CF chassis would be sick I think they make one for the limitless... scorched RC makes titanium chassis that are the same thickness as stock. Don't know how much it weighs.
Great video. I recently picked up a Typhon v5 and still waiting to run it. I would like to make some of the mods that you did. Do you happen to have a list of the part numbers that were used? Especially referring to using the Kraton parts to truggify it. Thank you in advance.
Thank you my friend... all u need are the kraton steering blocks and rear axle carrier as well as the stub axles. I suggest aluminum ones like hot racing for a # of reasons but it's not necessary. part# HRAAON21M01👍👍
Thank you... The tires are 2.8 proline trenchers belted.. the steering blocks and rear hubs are made for the kraton as well as the 4 stub axles. AON22M01-AON21M01
@@fxrc3086 they are sick have one on my kraton , definitely worth the cost I am getting a red weave one for Typhon this winter. He does all the arrma chassis now.
I don't know if that's a good idea. I had carbon fiber shock towers and one thing about carbon fiber is it doesn't really like taking hard hits. Where other materials bend slightly carbon fiber is so Ridgid it just explodes.
Thanks for the video Fox, really useful as a new Typhon owner (who has already bent the chassis and shock towers!). Was interested in the plastic "bumpers" you have on the front shock tower which stops the M2C metal from getting wrecked. Guessing they're something you made, rather than bought?
What’s your opinion on the TLR Typhon? I have the V5 Typhon with upgraded EXB parts & I’m considering truggifing it because it’s reinforced. Now I’d like to p/u the TLR Typhon & make it a speed car. Your opinion please?
Its the stub axle... its the part that goes into the hub and attaches to the CVDs. Ur going to want the 17mm weel hex from the kraton also. U can use the typhon 17mm weel hex but you'll need to space it out a bit but it works👍👍 good luck my friend
That would probably work as well. As long as the offset is enough. Large offset hex extenders aren't that great but you can also get weels with a decent offset added to a hex extender should work👍👍 truggifin it they way I did is just a more stable and durable way of doing it my friend
@@fxrc3086 awesome man i love our 6s Typhon this thing can FLY to the moon dude for sure. appreciate the detailed videos and you got my like and sub for sure
@@sopot44 thank you my friend... the typhon is one of the strongest RCs ever made and one of my favorite. Ive been making sure to get those part #s in my latest videos. Thanks again👍
Could you provide me with a list of parts needed to do the Truggy conversion with links? I'd really appreciate it. Im newer to RC an I wanted a Talion 6S but it's always on backorder so I bought the Typhon but want it to rip through the grass a little better
@@jaybee8786 so the ones on the talion are the same as the stock typhone. U need the wider hubs and stub axles from the kraton to give it a wider stance and to let u mount 2.8 tires
@@jaybee8786 u can use the stock 17mm weel hex but you'll need to put a shim or washer behind it or just get the kratons 17mm weel hexes which is easer👍👍
Skinny hubs. And all the because skinny small tires on the buggy . Now it raises a question. How much more power uou need to up? One whole scale. . That's why 1/8 buggy is 1/10 truck.
If arrma was smart they would just take the most common upgrades parts from m2c and just bash it and hite them to make the chassis and shock braces for all their cars
The 6s Typhon is awesome. You did a great job with the upgrades. I like the tires your going with. Great presentation. 👍
It it awesome... thank you
Such a tease... one of your favs... what's your fav? Comon dude, spit it out!!
It's more just the Arrma 8th scale platform that's my favorite bashers. Not just because arrma builds awesome rigs. It's because of the overwhelming aftermarket support that makes them so incredibly.
Like seeing how others upgrade their RC compared to me. I’m scouring the internet for Typhon upgrades and most are getting basher chassis, braces, and shock towers. I’m speed running my car so I’m looking for weight savings and drive train efficiency parts. I went with carbon fiber shock towers, ceramic bearing kit, and a tire balancer. I would like some milled out drive cups and titanium tie rods and pillow balls next.
That sounds awesome... I've always wanted a speed typhon, they look sweet. M2c does make a speed run chassis 👍👍
@@fxrc3086 I haven’t found a chassis that weighs less than the stock chassis. I have the V5 and it is strong enough for speed runs. Whom ever wants to make a molded CF V5 chassis for the Typhon can take my money.
@@TKO593 a CF chassis would be sick I think they make one for the limitless... scorched RC makes titanium chassis that are the same thickness as stock. Don't know how much it weighs.
can you add the parts for this in the description for us please?
Dear sir, great Tyohon 6s there!! I wish to convert the same as well. Do we need the Kraton CVD/Drive shafts as well? Thank you!
Thank you... you don't need the shafts the kraton stub axles will go on the typhon drive shafts👍👍
You don't need a new front bumper. Just add a m2c front skid plate to it and rock on 👍
Thats a really good idea thank you
@@fxrc3086 Its my standard setup now on all my arrma rigs with the t bone bumpers. Never worry about pulling bolts through anymore
@@DSC1320 Im definitely going to try it... I love these tbone bumpers thats just going to make it even better... thank u👍👍
Great video. I recently picked up a Typhon v5 and still waiting to run it. I would like to make some of the mods that you did. Do you happen to have a list of the part numbers that were used? Especially referring to using the Kraton parts to truggify it. Thank you in advance.
Thank you my friend... all u need are the kraton steering blocks and rear axle carrier as well as the stub axles. I suggest aluminum ones like hot racing for a # of reasons but it's not necessary. part# HRAAON21M01👍👍
I like these upgrades 🔥💪😃
Thank you... its a fun rig 👍👍
I need a truggy! Cool vid😊😊
Great video. Do you have a parts list for the tyres hubs??
Thank you... The tires are 2.8 proline trenchers belted.. the steering blocks and rear hubs are made for the kraton as well as the 4 stub axles. AON22M01-AON21M01
Almost bummed I bought the 3s version. Definitely not a regret but not as many upgrades for the 3s👊
There's definitely not... but its an Arrma so u cant go wrong
@@williamperri3437 the 3s version is nice too. It will be cool to see some more aftermarket parts for it.
Awesome video! Hope to get one of these in the summer
Thank you... its an Amazing RC to get... one of Arrmas best 👍👍
Just got this setup love it. Try a carbon fiber chassis bro they have fully molded ones that bolt right up.
Its definitely still one of my favorites... A Carbon fiber chassis would be killer... who makes them??
@@fxrc3086 they are sick have one on my kraton , definitely worth the cost I am getting a red weave one for Typhon this winter. He does all the arrma chassis now.
@@BNIRc that sounds so sick... im definitely looking into getting one
I don't know if that's a good idea. I had carbon fiber shock towers and one thing about carbon fiber is it doesn't really like taking hard hits. Where other materials bend slightly carbon fiber is so Ridgid it just explodes.
@@xXB.FunkXx all depends on resin weave and lay up my friend, and it's been a beast have had no issues
Fox, hope all is well. Love your build vids. Any new ones coming?
So to truggyfy it u just added kraton 6s hubs front and rear and the cv ends ?? The arms are typhon originals ??
that is right but you might want to put the kraton hexes also... you can use the typhons but you will want to space them out
@@fxrc3086 awesome thanks for the info
@@rogersanchez4687 any time 👍👍
Thanks for the video Fox, really useful as a new Typhon owner (who has already bent the chassis and shock towers!). Was interested in the plastic "bumpers" you have on the front shock tower which stops the M2C metal from getting wrecked. Guessing they're something you made, rather than bought?
Thank you... they are something i made out of a broken t-bone racing wing mount
@@fxrc3086 Super, thanks. Will see what I can come up with, amazed no-one has produced anything.
Hi, nice video!have you changed the punch settings to do a backflip?or its enough to change the tires?
Thank you... I did have the punch all the way up but the tires helped for backflips more.
@@fxrc3086 Thank you. What i have to change ro put the prolines mx28? with the original parts it stripes at the turnbuckles.
Max punch will do backflips on stock tyres I did a quad with mine
@@Nathan-qt2zi that's awesome. This one is crazy with the flips also... even more now with the new power system 👍👍
@@fxrc3086 cool when I can do my paper run to get money I will get mx28 and widening it
Nice video I just got a v5 typhon about to upgrade it thanks
Thank you... its an Amazing rig... one of my all time favorites... if you only do one upgrade it should be the front and rear chassis braces.👍👍
help what kind batterys are you using ? i have x2 3s battery 5000 my boody shell wont fit
I use 2 3s 5200 zeee battery or 1 6s 6000 zeeee battery and they're both a really tight fit
awesome build bra i got one my self with a few upgrades and in the proscess of truggifie it. also u gave me a few tips that i will use tnx.
Thank you bro... u should see it know, Ive done a few things... should post a video soon...👍👍
@@fxrc3086 cool looking forward to see it
@@fxrc3086 hey bro, I just got the v5, great buggy, are those 1:10 truck or truggy tyres you got on your buggy.,?
Many thanks man.
@@1521joe awsome... its one of my all time favorites.... so there 2.8 proline trencher HP with 17mm hex conversion
Where did you disappear to Fox?
what front wedge bumper is that you have on there?
It's a T bone racing bumper that I'm not sure u can still purchase
What’s your opinion on the TLR Typhon? I have the V5 Typhon with upgraded EXB parts & I’m considering truggifing it because it’s reinforced. Now I’d like to p/u the TLR Typhon & make it a speed car. Your opinion please?
I've thought about picking one up also. I love that it's a roller and with a few upgrades it will probably be an amazing RC
Got my first arrma a granite a month ago . They are tough , im now wanting a typhon and probably will truggy it too
It's a super rugged RC and very versatile. One of my favorites 👍👍
Great video thanks I've been thinking about getting one also
Hey what’s that part that you said was from the kraton or the outcast ( the part that’s at 3:58 )
Its the stub axle... its the part that goes into the hub and attaches to the CVDs. Ur going to want the 17mm weel hex from the kraton also. U can use the typhon 17mm weel hex but you'll need to space it out a bit but it works👍👍 good luck my friend
@@fxrc3086 thank you !!
@@xl_itzdieselz_lx8617 any time👍👍
What's the things you got protecting the front and rear arms?
They're peaces of a tbone racing wing mount I cut up and use as sliders to protect my shock towers
@@fxrc3086 thankyou👍
Where did you get the mud flaps?
I believe they're Tbone racing
I love this car!
Run video?
Can i just get the Kraton 17mm extender? or do i need to replace the entire hub for the bigger wheel setup?
That would probably work as well. As long as the offset is enough. Large offset hex extenders aren't that great but you can also get weels with a decent offset added to a hex extender should work👍👍 truggifin it they way I did is just a more stable and durable way of doing it my friend
@@fxrc3086 awesome man i love our 6s Typhon this thing can FLY to the moon dude for sure. appreciate the detailed videos and you got my like and sub for sure
@@sopot44 thank you my friend... the typhon is one of the strongest RCs ever made and one of my favorite. Ive been making sure to get those part #s in my latest videos. Thanks again👍
I thought the firma esc in the Typhon is a rebranded max6.
It probably is a rebranded max8 not 6 the max6 is 8s
Could you provide me with a list of parts needed to do the Truggy conversion with links? I'd really appreciate it. Im newer to RC an I wanted a Talion 6S but it's always on backorder so I bought the Typhon but want it to rip through the grass a little better
So you'll need the front and rear hubs from the kraton as well as the stub axles 👍👍
@@fxrc3086 how come not the ones from the Talion? Or are they the same thing?
@@jaybee8786 so the ones on the talion are the same as the stock typhone. U need the wider hubs and stub axles from the kraton to give it a wider stance and to let u mount 2.8 tires
@@jaybee8786 u can use the stock 17mm weel hex but you'll need to put a shim or washer behind it or just get the kratons 17mm weel hexes which is easer👍👍
@@fxrc3086 are the kraton stub axles the same front and rear?
Wow all those parts you spoke about and didn’t even list or link one part in the description 🙄
Uhhhhhhhhhhhhh you are lost. FOX RC is showing his build not teaching you how to build it. 🙄
@@dklien6443 why tell us about it then. You might as well just show a video with no speaking 🤦🏻♂️
Skinny hubs. And all the because skinny small tires on the buggy . Now it raises a question. How much more power uou need to up?
One whole scale. . That's why 1/8 buggy is 1/10 truck.
The stock system handles 2.8 tires just fine... its the same system in all arrmas 1/8 line👍👍
If arrma was smart they would just take the most common upgrades parts from m2c and just bash it and hite them to make the chassis and shock braces for all their cars
Right... I love Arrma but what makes them really Amazing is the M2C racing as well as other upgrades👍👍
@@fxrc3086 true but if they just included m2c chassis shock towers and supports they would actually be arrma tough 🤣
@@repentorperish1386 Im with you brother... instead of an EXB roller it could be an M2C Edition... that would be Amazing 👍👍
@@fxrc3086 thanks for replying. Thats cool from a youtuber :) and yeah they would see a huge boost in sales lol
@@repentorperish1386 thank you and any time... I love talking RC
2nd arrma for me to
Arrmas are Amazing.... especially the 8th scale arrmas... Im up to like 10 of them...👍👍
My 12 year old has one..