Kept getting an error, that there was no programmer. It must be a change in the IDE from this version. In the end, when uploading to the AtTiny via the programmer, do not use the usual "Verify and Upload" buttons, but enter Top menu- "Sketch", and then use "Upload Using Programmer". Worked like a charm after this! Thanks!
Refer to this pinout diagram to see what pins you can use. There are 3 analog pins. You can even you the pins that you use for programming. miro.medium.com/max/2450/1*YgfXzyFlpP_IgSCdCE3Jxg.jpeg
@@LiveSparks Interestingly, I found that it may be possible to use AVRDUDE with an FTDI board (the kind used to program an Arduino Pro Mini) to upload. Seems like it needs a few extra steps though. Not sure yet
Great video! this helped me finally have success programming an ATtiny85. I also think your white board you designed to expedite further programming removing room for errors during using jumpers.
Is it actually possible to make a Universal IR remote? As far as I know, the IRremote library (which is brilliant for everything) can't run on the Attiny85. I'd be happy to be proved wrong because I'd love to make my universal remote even smaller
It is certainly possible. Making a truly universal remote would hard requiring a lot of optimization but sometimes catered to your particular needs is definitely doable. If you like the idea of such a project then you should definitely give it a go. It will be a great learning experience.
hello, I programmed attiny85 with Relay By Arduino But with its connected to arduino works But with the 9v Battery not working help me please . thanks.
slow down, take a breath, smell the flowers, and no more coffee for you today! great video with excellent information. i WILL view it again (and again) to get all the good info you have presented, thanks.
A wonderful video very interesting, I wanted to ask you if you could do a video tutorial with Attiny85 and 74hc595 in order to multiply the outputs of Attiny85 being able to manage 8 relays. Thank you very much for your attention I hope very much that you will do this tutorial.
Can you post the Eagle file for the project. Reason I am asking I would like to add capabilities to the board to make it more usable than just a programing board to ATTINY. Regards, Dana.
The project was made in easyEDA and not in eagle so I don't have any eagle files. You can open and edit this in easyEDA and look if there is an option to convert the project to an eagle supported format.
i like the video you made, but you was going thru stuff quite fast, making it hard for a NOOB like me to keep up and follow.. i'd like to make a custom 4 led volt meter, where i can command the exact voltage before a led turns on. i have a non-linear hall sensor that i am to use , so i need to set custom turn on points, and have a small hysteresis as well.. if you have interest to help, feel free to let me know..
Man I wish you would work a little faster!! I kept getting bored throughout the entire video waiting on you to tell us the next step. Sorry my brain can’t work that slow.
I have wasted MANY hours on this. ---- IT DOES NOT WORK using your connections, and IDE V 1.8.9 selecting "Arduino as ISP (ATTinyCore)" or "Arduino as ISP (ATmega32U4, ATTinyCore)". What the !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Kept getting an error, that there was no programmer. It must be a change in the IDE from this version.
In the end, when uploading to the AtTiny via the programmer, do not use the usual "Verify and Upload" buttons, but enter Top menu- "Sketch", and then use "Upload Using Programmer".
Worked like a charm after this! Thanks!
Thanks! Other tutorials say that it's just in the board manager, but it wasn't there, so this tutorial really helped me!
awesome video. Concise introduction, just what i was after. thank you and keep it up
very well explained, and your accent was no problem, if only others were as clear as you are, thanks !
Bro in some videos they r telling to choose internal 8mhz nd burn bootloader bt same when i did it shown error . Why?
merhaba yükleme yaparken "Upload error: A programmer is required to upload" hatası veriyor. Sebebi ne olabilir?
i am getting this:
avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
Can you pull the program written in it using Arduino?
It should be possible to retrieve the hex file but not the source code
Ok I am confused, can the ATtiny85 read in analog input in reference to serial communication SCL and SDA ? Pins 6 and 7 I saw were not used.
Refer to this pinout diagram to see what pins you can use. There are 3 analog pins. You can even you the pins that you use for programming. miro.medium.com/max/2450/1*YgfXzyFlpP_IgSCdCE3Jxg.jpeg
LiveSparks thank you. Also, are pins 6 and 7 on ATtiny85 usable, I noticed he had no wires connected to those pins to program?
They are usable
Can you program the ATTiny24/44/84 in that larger socket?
Quick question: Is there a way to upload code from a hex file to the ATTINY using the Uno?
There should be a tool on the nets somewhere. The one that I can remember is AVRDUDE but I don't know if it can do it through the UNO.
@@LiveSparks Interestingly, I found that it may be possible to use AVRDUDE with an FTDI board (the kind used to program an Arduino Pro Mini) to upload. Seems like it needs a few extra steps though. Not sure yet
Great video! this helped me finally have success programming an ATtiny85. I also think your white board you designed to expedite further programming removing room for errors during using jumpers.
What program did you use to create the Schematic / Board layout?
Easyeda
@@LiveSparks - Thanks!
Very well explained; worked first time!
Is it actually possible to make a Universal IR remote? As far as I know, the IRremote library (which is brilliant for everything) can't run on the Attiny85. I'd be happy to be proved wrong because I'd love to make my universal remote even smaller
It is certainly possible. Making a truly universal remote would hard requiring a lot of optimization but sometimes catered to your particular needs is definitely doable. If you like the idea of such a project then you should definitely give it a go. It will be a great learning experience.
Hello, Friend!
I have this error:
avrdude: Yikes! Invalid device signature.
Can you help me?
hello,
I programmed attiny85 with Relay By Arduino
But with its connected to arduino works
But with the 9v Battery not working
help me please .
thanks.
Excellent! Well done!
slow down, take a breath, smell the flowers, and no more coffee for you today! great video with excellent information. i WILL view it again (and again) to get all the good info you have presented, thanks.
When I upload the arduino isp, I receive a fault. #Define SERIAL Serial
Serial is not declared
Whar do I do?
A wonderful video very interesting, I wanted to ask you if you could do a video tutorial with Attiny85 and 74hc595 in order to multiply the outputs of Attiny85 being able to manage 8 relays. Thank you very much for your attention I hope very much that you will do this tutorial.
You rock bro. It is working. Cheers from Amsterdam!
hi, where should I put the folder Attiny programmer Shield ?
0:32 Funny demo of usb interface, you never know until you try
Does this work with an attiny straight from the factory with no bootloader?
It should, if it doesn't, there is an option in the arduino IDE to burn the arduino bootloader.
Can you post the Eagle file for the project. Reason I am asking I would like to add
capabilities to the board to make it more usable than just a programing board to
ATTINY.
Regards, Dana.
The project was made in easyEDA and not in eagle so I don't have any eagle files. You can open and edit this in easyEDA and look if there is an option to convert the project to an eagle supported format.
its confusing that you seem to turn the board around during the video
Good tutorial, thanks.
Hello my Friend...good video..
can i use the attiny85 for servo control?
Yes, just like you would use any other Arduino board.
thank you! So there is no need for a capacitor fpr programming?
Not really.
Nice video... Queries about what s/w you use for video editing & screen capture ?
+sreeram Tharekkad Premiere Pro and OBS respectively
Are the Gerber files on Github the latest version ?
I don't remember if I updated the Gerber files or not but the easyEDA project was the latest. Open that and generate the gerber from there.
Where is the EasyEDA file located ?
i like the video you made, but you was going thru stuff quite fast, making it hard for a NOOB like me to keep up and follow.. i'd like to make a custom 4 led volt meter, where i can command the exact voltage before a led turns on. i have a non-linear hall sensor that i am to use , so i need to set custom turn on points, and have a small hysteresis as well.. if you have interest to help, feel free to let me know..
Good job! Thanks..
How many times we are programme it?
I upload a led blink programme first, after that i want to change the programe, can i do it with ATtiny85?
Hi Robbi you can add the link for the attiny as board?
You can get them really cheap on Ebay/Aliexpress
প্রোগ্রাম দেওয়ার পর আরডুইনো ছাড়া এটাতে শুধু পাওয়ার দিলে কার্যক্রম ঠিকঠাকমতো করবে না???
vai karon ki ?
Awesome video. Thank you.
+krunal patel glad you liked it.
I heard "Hello" and "Goodbye" was there something in the middle???
nice one good video thank you
Well done
Man I wish you would work a little faster!! I kept getting bored throughout the entire video waiting on you to tell us the next step. Sorry my brain can’t work that slow.
That was hilarious! Seriously, though, I loved the presentation. One can always go back and parse the parts that require more careful inspection.
flawless
Thank you very much! This tutorial worked perfectly! As of December 27 2017
+Joseph Kreifels II Happy to help!
awesome thanks brother for board manager url.....this part is very hard...how's this possible been done by me, I don't know
nice video.. keep it up
I have wasted MANY hours on this. ---- IT DOES NOT WORK using your connections, and IDE V 1.8.9 selecting "Arduino as ISP (ATTinyCore)" or "Arduino as ISP (ATmega32U4, ATTinyCore)". What the !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Worked for me. There is a chance that an update might have broken something. You might have to do a bit of research of your own.
Thanks
attiny board manager cont instol
Capictor use karo
What are ur Educational qualifications?? Bahi?
Btw nic vid!!😘✌👏👍
+Sachin shukla Currently getting my computer science degree
Live Sparks which college which course bro??
"hey you guys rubby here"
keep it up
Good #NMElectrical
Slow down, you are trying to teach give us a chance to take it all in.
Turn on subtitles for help.
slow down
+Original map of Mexico You can turn on the captions for help.
is we program it again and again and please make a video of how to lock ATmega328p when it stand it alone!. Thanks
you go too fast
Set RUclips SPEED to 0.75 :) from wheel sign