Great looking watch. I was lucky to get one in the second batch on October 16th. It sold out in 2 minutes. I took your advice and kept refreshing the listing.
@@Time_and_time_again The watch arrived today at my home in the U.S. (only 4 days after purchasing it). I got it sized, and love it! It wears a bit smaller than I envisioned it.
Great looking watch man, I’ve always been curious about this brand. However like you mentioned, they’re super hard to get. Keep up the great work brother 👍🏼
I did exactly the same with regard to purchasing! Had the app open on my phone, was refreshing like mad and thankfully got one (coming tomorrow!) Learnt my lesson with the Everest, took time putting my card details in and it vanished! Great advice.
Top notch video, as usual! Also can't wait for your other Christopher Ward videos, CW should be thankful towards you, just when I wanted to get the C63 Sealander GMT you sold me on the C60 Trident Pro 38mm as well, so I did the only reasonable thing when you can't decide between two watches and got both haha.
Received mine tonight. The negatives: No reviews mentioned the metal bracelet has a different color than the case. The fit is great but the colour doesn't match. The bezel action seems very unrefined to me. It's loud and rough. On a good note, there is no back play whatsoever. Instead of 6 micro-adjust holes, I could do with 4 if they made the clasp shorter to balance the case. Other than these, all looks great. The case doesn't feel thick. Proportion is good, seconds hand reach to the edge of the dial. Loved the muster colour of the indexes in contrast to the black dial.
Thanks for the info! I don’t think anyone has had chance for a full review just yet but I’ll be sure to have a look at your very good observations and talk about them in my review when I do it 🙏👍
Great review! This sure is a beautiful piece. Happy owner of a PRS-25 I might try to get my hands on the PRS-60 as well (not an easy task as you described it well). Keep up the good work!
Excellent watch, love your Sinn too, you could be bad for my wallet. Look forward to the pics on Watch Crunch. PS: I think the orange strap looked fine.
After missing the time slot on this one i’m relieved to see this is much too chunky for my tastes (i am very picky). The dial is gorgeous though, similar to the prs-25 gilt dial i had.
I've never understood why this brand doesn't take pre orders on their website rather than the free for all style that they operate. It's always put me off a bit 🤷🏾 lovely looking watch though 👌
14.6mm is verging on unwearable. I cannot imagine that being as comfortable as a 12mm watch on the long run. I do not see the point of a faraday cage, i have many watches, most lacking a faraday cage and they do just fine in terms of accuracy.
@@Time_and_time_again Great review, thanks! It's a beautiful watch but is nearly the thickness of a mechanical chronograph. I don't think a nato strap would work too well with the additional height it would add to it.
Watch heights are so personal or individual and independent. Each watch needs to be worn on a proper bracelet or strap before making a judgment… depth really is more than a number imho (if that makes sense). I’ve been surprised many a times but really appreciate everyone’s opinions. Thanks
Great review, it looks superb and will go with so many straps!! Could you please tell me where you got the brown leather strap right at the very end of your video?
Thank you and that strap is from Amazon, here’s the link for you… Berfine 20mm Retro Handmade Watch... www.amazon.co.uk/dp/B0918B7SP8?ref=ppx_pop_mob_ap_share
@Time and time again: When sizing the bracelet, did the screws of the links come loose easy? No Loctite/glue needed? What size screwdriver needed? Perhaps need to buy the correct size. Ordered my Commander today(lucky).
Hi mate, they came out fairly easily but didn't go back in very easily. I had most success when screwing with a 1.2mm until I got close to the link then did the last few turns with a 1mm. Hope this helps 🙏
I wish it wouldn't be so thick. I'd probably give up on the antimagnetic cover for a thinner case.It also seems to be a magnet for fingerprints from your video. It's a nice watch but the fake patina and old lume doesn't do the trick for me
Actually appreciate the first six minutes as I was confused the other night whilst trying to finger out “Smith’s” website, or time-factor’s site. Thanks, Tank and Time and time again.
Myiota Movement 😂 cmon …. Never ever, even if it looks like a Rolex and even if it’s smiths clone … it’s a Japanese Mvt… I would never buy this for 460 Dollars! Steinhart is Swiss Made with an ETA and has the same clone …
Always the finest british timepieces, this one sure is amazing and hard to get ! Love Smiths and my PRS Commando ! Regards from France
Designed in England, manufactured in China/Hong Kong though..
Many thanks for a chilled watch review. Really enjoyed the song at the end. Take care and stay safe 👍🏼
Thanks for the great feedback Peter 🙏👍
Great looking watch. I was lucky to get one in the second batch on October 16th. It sold out in 2 minutes. I took your advice and kept refreshing the listing.
That's great! 👍
I just managed to purchase a PRS-60 in the last round of orders. I'm looking forward to receiving it. Thanks for the unboxing and review.
Well done on purchasing. Not always an easy task 😊👍
@@Time_and_time_again The watch arrived today at my home in the U.S. (only 4 days after purchasing it). I got it sized, and love it! It wears a bit smaller than I envisioned it.
@@adventuresinpianoing6189
Great looking watch man, I’ve always been curious about this brand. However like you mentioned, they’re super hard to get. Keep up the great work brother 👍🏼
Thank you mate 🙏👍
I did exactly the same with regard to purchasing! Had the app open on my phone, was refreshing like mad and thankfully got one (coming tomorrow!) Learnt my lesson with the Everest, took time putting my card details in and it vanished! Great advice.
Glad to hear you got one Simon! Yes, it’s a bit of skill when making the purchase isn’t it 😊👍
Top notch video, as usual!
Also can't wait for your other Christopher Ward videos, CW should be thankful towards you, just when I wanted to get the C63 Sealander GMT you sold me on the C60 Trident Pro 38mm as well, so I did the only reasonable thing when you can't decide between two watches and got both haha.
Thanks mate! And that sounds perfectly reasonable to me! 😂👍
En route to half a thousand subscribers, my friend! Keep up the good work m8 love the reviews
Thank you mate 🙏👍
Received mine tonight. The negatives: No reviews mentioned the metal bracelet has a different color than the case. The fit is great but the colour doesn't match. The bezel action seems very unrefined to me. It's loud and rough. On a good note, there is no back play whatsoever. Instead of 6 micro-adjust holes, I could do with 4 if they made the clasp shorter to balance the case. Other than these, all looks great. The case doesn't feel thick. Proportion is good, seconds hand reach to the edge of the dial. Loved the muster colour of the indexes in contrast to the black dial.
Thanks for the info! I don’t think anyone has had chance for a full review just yet but I’ll be sure to have a look at your very good observations and talk about them in my review when I do it 🙏👍
The bracelet also have sharp edges and does pull my hair from time to time due to loose tolerance. Good thing the watch is a strap Monster.
Great review! This sure is a beautiful piece. Happy owner of a PRS-25 I might try to get my hands on the PRS-60 as well (not an easy task as you described it well). Keep up the good work!
Thanks Tom 🙏👍
Very nice looking watch
Gorgeous watch - loved the review - subscribed !!!
Much appreciated! 🙏👍
Great video Allan as usual.
Thanks Graham! 🙏👍
20:00 to 23:12 with the sound down is Harry Potter without the wand, finally the magic is working on the straps 😂
😂👍
Great video .. well done ! I love your leather strap option are you able to tell me where you purchased it please?
Many thanks 🙏🏼
Thanks Shane! Yes it’s from Amazon and here is the link… Berfine 20mm Retro Handmade Watch... www.amazon.co.uk/dp/B0918B7SP8?ref=ppx_pop_mob_ap_share
Many thanks for your reply it’s much appreciated. 👍🏼
Excellent watch, love your Sinn too, you could be bad for my wallet. Look forward to the pics on Watch Crunch. PS: I think the orange strap looked fine.
Thanks Steve! Hopefully Your wallet doesn’t suffer too much sorry 😊👍
Stunning
After missing the time slot on this one i’m relieved to see this is much too chunky for my tastes (i am very picky). The dial is gorgeous though, similar to the prs-25 gilt dial i had.
I’d have to agree on the chunckiness mate 👍
You are a man of great taste!
Thank you sir! 😊👍
I've never understood why this brand doesn't take pre orders on their website rather than the free for all style that they operate. It's always put me off a bit 🤷🏾 lovely looking watch though 👌
Yes I agree! I don’t understand it either 🙈
14.6mm is verging on unwearable. I cannot imagine that being as comfortable as a 12mm watch on the long run. I do not see the point of a faraday cage, i have many watches, most lacking a faraday cage and they do just fine in terms of accuracy.
I’d have to agree with you 👍
@@Time_and_time_again Great review, thanks!
It's a beautiful watch but is nearly the thickness of a mechanical chronograph.
I don't think a nato strap would work too well with the additional height it would add to it.
Watch heights are so personal or individual and independent. Each watch needs to be worn on a proper bracelet or strap before making a judgment… depth really is more than a number imho (if that makes sense).
I’ve been surprised many a times but really appreciate everyone’s opinions.
Thanks
Great review, it looks superb and will go with so many straps!! Could you please tell me where you got the brown leather strap right at the very end of your video?
Thank you and that strap is from Amazon, here’s the link for you… Berfine 20mm Retro Handmade Watch... www.amazon.co.uk/dp/B0918B7SP8?ref=ppx_pop_mob_ap_share
@@Time_and_time_again thanks very much!! Enjoy your weekend 👍
Awesome 👍
@Time and time again: When sizing the bracelet, did the screws of the links come loose easy? No Loctite/glue needed? What size screwdriver needed? Perhaps need to buy the correct size. Ordered my Commander today(lucky).
Hi mate, they came out fairly easily but didn't go back in very easily. I had most success when screwing with a 1.2mm until I got close to the link then did the last few turns with a 1mm. Hope this helps 🙏
@@Time_and_time_again Thanks!
Beautiful watch, and very good presentation, how long does it take to receive your order?
Thank you 🙏 took about a week from ordering 👍
@@Time_and_time_again thank you for your answer
I wish it wouldn't be so thick. I'd probably give up on the antimagnetic cover for a thinner case.It also seems to be a magnet for fingerprints from your video. It's a nice watch but the fake patina and old lume doesn't do the trick for me
Have to agree with all of this (particularly the proportions being a bit off) 👍
where is the song? "I've got a watch on my hands"
That’s just a little song I wrote myself 😊👍
Would you have the link to it? I can’t find it, but really really enjoy it. It resonates with me very well
Even with dome sapphire 14.6 mm on a 38 mm diver ? It’s bizarre the Miyota movement is thin don’t really understand why the watch is so thick..
Yes I agree! I’ve been told it has something to do with the anti magnetic casing inside 🤷♂️👍
It fits perfect on you what size are your wrist I’m worried it may look small on me
Mines only 6.25” so if you’re even slightly bigger I’d go for the 40! 🙏👍
@@Time_and_time_again ye 18.5 cm me but I thought they only did it in a 38 🤔
@@188313 sorry yes you’re right! I thought you made this comment on my christopher ward trident video! 🙈🙏
nice!
Looks like a chunkier Blancpain.
Yes it does actually 👍
Pretty thick?
Yes it is rather thick! 😊👍
Made in China?
Not entirely sure but probably! 👍
Harder to get then a Rolex Daytona..
😂👍
6 minutes in……
Until I get it out of the box yeah? 😊
Actually appreciate the first six minutes as I was confused the other night whilst trying to finger out “Smith’s” website, or time-factor’s site.
Thanks, Tank and Time and time again.
Oh don’t get me wrong, I actually liked the review. My excitement of seeing the watch took over my emotions for a bit lol
Myiota Movement 😂 cmon …. Never ever, even if it looks like a Rolex and even if it’s smiths clone … it’s a Japanese Mvt… I would never buy this for 460 Dollars! Steinhart is Swiss Made with an ETA and has the same clone …
Too thick. That’s a dealbreaker.
Agreed mate! 🙏👍