I’ve seen someone else mount these bags and they put the big washers on the inside of the bags which makes sense to prevent the bags pulling out of the pre drilled holes through weight etc. They look good though!! Nice work 👍🏍
That does make sense. I am guessing that because I only got the 4 large washers and none of the other 8 were included I missed that. However I do have something I am trying and I will keep you guys updated on it. Their quick lock mounting systen is not compatible with these so I am getting creative and if it works it will be a cool little hack to make these easily removable and also help retain them while mounted like the washers you mentioned. Appreciate the tip!
I got the same bags for my 2022 Scout Rogue Sixty ABS, a few days ago and yes, they came with only 4 big washers, I luckily had some extra at home, I use the factory washers that came in the motorcycle, I use one outside the bag , put 2 big washers inside with the acorn nut , broke 2 of them in the first install and the other 2 survived 😂😂, I’m planning to get a couple of quick release anchors for inside the bag, got the lidlox handlebar helmet locker, floorboard, crush bar and heel/toe shifter, I got use to because I used to have a HD , so now I’m planning to get a Bluetooth speaker to hide between the handlebars and the useless tiny fairing 😂😂, ride safe brother. 👍👍
I just put these bags on my 2023 rogue. I didn't receive any paperwork at all and received the exact hardware you did. I placed the flat washers inside the bags for support and used 1/4" spacers to take up slack before installing the cap nuts.
Yea I have since revised mine to do this. I also used some M8 threaded black screw on handles and a lock washer to make them more quick release and not need a wrench.
Those looks really good. I just bought them for my 23 Bobber Twenty. Website still has them listed as preoder. Can't wait to get them to replace the tiny registration holder that I've got on there now. Is that the Indian mid height windscreen on yours as well? I've been thinking about getting it as the wind gets a little brutal over 60. Do you like it and does it make a difference?
You might want to blue loctite the bolts at the fender if you don’t plan on making a quick release solution soon because mine were coming loose after a week, luckily I was checking periodically.
Good tip. So far so good. When I removed it prior to install the plate holder on the left side they held up fine for the last 8 months but yea I will check on them for sure.
I’ve seen someone else mount these bags and they put the big washers on the inside of the bags which makes sense to prevent the bags pulling out of the pre drilled holes through weight etc. They look good though!! Nice work 👍🏍
That does make sense. I am guessing that because I only got the 4 large washers and none of the other 8 were included I missed that. However I do have something I am trying and I will keep you guys updated on it. Their quick lock mounting systen is not compatible with these so I am getting creative and if it works it will be a cool little hack to make these easily removable and also help retain them while mounted like the washers you mentioned. Appreciate the tip!
Instructions are right under these bags on the website. The big washers only go on the bag part inside and outside - not the fender bolts…
I got the same bags for my 2022 Scout Rogue Sixty ABS, a few days ago and yes, they came with only 4 big washers, I luckily had some extra at home, I use the factory washers that came in the motorcycle, I use one outside the bag , put 2 big washers inside with the acorn nut , broke 2 of them in the first install and the other 2 survived 😂😂, I’m planning to get a couple of quick release anchors for inside the bag, got the lidlox handlebar helmet locker, floorboard, crush bar and heel/toe shifter, I got use to because I used to have a HD , so now I’m planning to get a Bluetooth speaker to hide between the handlebars and the useless tiny fairing 😂😂, ride safe brother. 👍👍
I just put these bags on my 2023 rogue. I didn't receive any paperwork at all and received the exact hardware you did. I placed the flat washers inside the bags for support and used 1/4" spacers to take up slack before installing the cap nuts.
Yea I have since revised mine to do this. I also used some M8 threaded black screw on handles and a lock washer to make them more quick release and not need a wrench.
Those looks really good. I just bought them for my 23 Bobber Twenty. Website still has them listed as preoder. Can't wait to get them to replace the tiny registration holder that I've got on there now. Is that the Indian mid height windscreen on yours as well? I've been thinking about getting it as the wind gets a little brutal over 60. Do you like it and does it make a difference?
You might want to blue loctite the bolts at the fender if you don’t plan on making a quick release solution soon because mine were coming loose after a week, luckily I was checking periodically.
Good tip. So far so good. When I removed it prior to install the plate holder on the left side they held up fine for the last 8 months but yea I will check on them for sure.
Make a quick run to harbor freight to pick up hardwares😂
You get what you pay for XD
Will these fit an open face helmet inside?