Harley Davidson Ape Hanger Handlebar Internal Wiring volume 1
HTML-код
- Опубликовано: 21 апр 2017
- This is a 6 part series showing the basics of internally wiring a set of ape hangers on a Harley Davidson touring model, pre 2014. I thought I'd make this to help others with their handle bar swap. I'm just a self taught garage mechanic but I'm a professional at wiring things. I'm and electrician and a substation switchboard wireman. I hope this makes someone's project a little easier.
![Jelly Roll - Dead End Road (From Twisters: The Album) [Official Music Video]](http://i.ytimg.com/vi/_Mb8CqKW4R8/mqdefault.jpg)
Hey, I like this dude. He walks you through it. He’s not trying to sell you anything. He’s helpful so I subscribed.
You are the only person that has done a video for wire extensions to this day. Thank you!
I have watched several videos and could not get the pins to dislodge the way others did it for my 13 CVO RG. Spent hours searching, watching and trying. I thought I would look for one more video. Watched your video last night. You explained it with a slight variation... and boom... I was pulling pins at 1AM. Give the camera woman a raise. Thanks!
Jimmy Dakotagv awesome! I’m glad I could help. That’s the whole reason I made these videos.
The camera woman is well taken care of! 😎
Great video. As a employee of a major connector manufacturer, I appreciate your knowledge and understanding of the insulator and conductor crimps on the male and female terminals, and how important the crimping process is to a great connection, and not to damage the housing or connector and show patients on those stubborn ones! 😎you make it look easy.
DUDE! Thank you for this series of videos! I have been reading forums and watching other videos, but none have been as in depth or as helpful as these! Also nice how you talk us through each step that you are doing and are crazy thorough! Keep up the good stuff man. 🤘
You’re welcome, I’m glad it helped!
I really really appreciate this video!!! I wouldn't have figured it out without you. I used a paper clip based on the tool you said you made with a needle. It worked great. I can't thank you enough.
Just want to thank you. Had to switch out my apes for new ones and your video got the job done for me. I didn’t have something small enough to release the pins. So I pulled the entire white clip out and then pushed the pins up, twisted to the right and they slid out. But thank you again.
anthony delgrosso you’re welcome. I’m glad I could help.
that's what I figured out and it took me a while to do so
It’s easier if you push the pin using the needle from the other side.. in fact you push the lever down and it releases the pin.. paper clip does the trick.
I clicked subscribe right when you said the old forcep or "roach clip"🤣😎💯
Thank you so much for the info we just put new bars and we've got a gremlin most likely a crossed wire when I reverse the plug harnesses back-and-forth from right to left under the gas tank the starter button switches from the horn to the starter🤦🏼
At least you know what the problem is. That’s half the battle in fixing something. I’ve been having an issue with my cruse control not working after a few times of resetting it until I shut the bike down and re start it. It’s been a bugger to track down what’s wrong.
Yup , me to 😜 .
You dont know how long I messed with that dang connector trying to figure out how to get the wires from it. This helped a lot. I have a dyna but same set up. Thank Youuuuu!!!
Brantlee Avants you're welcome, I'm glad I could help!
Thank you for this series of videos. Very informative and helped me when I wired my bars!
You’re welcome. I’m glad they helped!
Hey bud thanks a lot for this I been here 3 hours trying to get those connections apart
I’m glad it helped!
You have saved me hours of frustration. Thanks so much for putting this video up. 👍🏻
Patrick Stone you’re welcome. I’m glad it helped!
I like how you made use of the needle. I found a thimble is very helpful with this procedure.
Wayne S good idea. I’ve jammed that into my finger a time or two.
A true professor!!!
Thank you, I hope I helped you out.
This is a very nice video. Thanks.
You’re welcome
Thanks Brother.. I'm getting ready to Install some new handlebars... you been a great Help... thank you and thank you for being there...... Thank you
James Carter you’re welcome. Glad I could help
Great video. Thank you so much!
Your welcome!
Great series for pre-14 baggers. Very helpful. Thanks !
Harley David your welcome. I'm glad you found it useful, it reaffirms why I spent the time to make it!
wish I would have found this earlier, took me a while to figure out "how to remove wires from plug connectors" anyway, Thanks. good video
Bill Watson you’re welcome and thank you!
Foreal I just said screw it and broke the housing haha
Great video man. Any possible way you could share that wire diagram for the lead to the pigtail? Tried to screen shot it but not the best quality
Thank you sir
you saved the day !
You’re welcome! I’m glad my effort to make these videos has helped people out. That was my intention.
absolutely brilliant thank you!
I don’t know about brilliant, but you’re welcome!
Thank u
You’re welcome
I subscribed solely for the roach clip reference
😃
Thank you sir your a big help
You’re welcome!
Those are some strange thumb nails lol. Great video, very informative.
I have stub thumbs. It’s caused by genetics. Some people only have one stub thumb. I worked with a gal years back that had one stubby and one normal. I used to think everyone else had weird thumbs lol.
Looking for a 14” extension kit for my 2009 roadglide any ideas?
dip c2c two sources I’ve had good luck with are Eastern Performance
(www.easternperformance.com/)
and Dennis Kirk
(www.denniskirk.com/?gclid=CjwKCAiAyMHhBRBIEiwAkGN6fJvzhr0EG0lA5CHiLimut0434E14mQjRiwQ_PYxK2TM_gVSIZx09NBoCGlAQAvD_BwE&ad=231775418824)
Do you run the brake cables and throttle also Im having a hardvtime
I haven’t made a video about replacing cables or brake lines if that’s what you’re asking. At the time of this video, I was changing from 12” to 14” bars and didn’t need a new clutch cable or brake line.
Is there a way I can get your what wires do what on the internal ape hanger wiring ??
What year is your bike?
It looks like there’s several of the same color wire, how do you know which is which when it comes time to plug them back in?
Wires that are the same color have a different colored stripe. Between the wire colors and the stripes, all wires are uniquely identifiable.
@@skydude426 oh ok, that makes more sense
@@skydude426 ok just take a shit ton of pictures ha
Pictures can be a big help but it’s important to make yourself a diagram showing the wire positions in the connector before removing any.
Hi mate which size wires we can use to extend the stock wires. I m doing 2018 deluxe
I don’t know what the 2018 models have for wiring to the handle bar controls. I’m not sure which year, but the control switches changed and so did the wiring. In the bikes with control switches like the ones on my 2012 in the video, 18 or 20 gauge will work fine.
@@skydude426 thanks for replying. Can I use same for Throttle wire
You can if you plan on soldering the throttle wires. If you do, be careful not to mix them up. Some of them are the same color. Also, they are smaller wires, I guessing 22 gauge. I chose not to solder the throttle wires and bought a plug and play extension. That saved me the hassle of dealing with the small connector and associated pins. If I remember correctly I bought it at my local dealership. You can also find them on line.
Hello Sky Dude,
I’ve watched all 6 videos. I have say, you help me to make the decision to do this myself. If it’s not to much trouble, where did you buy the braided nylon? I need to buy some wire cutters and crimping tool. What brand of tool did you buy on eBay? I too, don’t want to spend a fortune on tools.
Here’s a link to a site I found after I did my handle bars. They sell the crimp tool I use for 25 bucks. They also sell custom cut colored wire lengths and virtually any terminal or pin you could need on a Harley. Very handy site for Harley wiring projects. They also have expandable sleeping.
4rcustomswire.com/products/molex-style-crimp-tool-delphi-amp-tyco-terminals-crimper-open-barrel-22-12-awg
Here’s another site that sells connectors and expandable sleeves. This is where I bought mine.
www.elecdirect.com/
Thank you so much, I ordered it today!
Hello Sky Dude,
I was wondering if you could come to my rescue one more time. I’m upgrading all my handlebar switch housings to chrome. As I said before, I have the Ultra Classic Tri-Glide. I’m told from my local Harley Davidson dealership, that Harley does not offer the reverse switch housing in chrome. Bummer! Any idea who I can go to for an aftermarket reverse switch housing? Don’t really want to go back with the black housing when everything else is chrome. Any help will be greatly appreciated!
I did some checking on my lunch break. I couldn’t find anything for the reverse switch housing. Sorry I’m not any help with this one.
Why can't the stock wires be cut in the center and wire added ?
Ringo Gingo they can if that’s the way you want to do it. You’ll have to make twice as many splices.
Can u post pics of your wiring diagrams?
I would but it doesn’t look like RUclips will let me.
Wouldnt it be easier to connect one every time disconnect one?
I’m not sure I understand what you’re asking.
@@skydude426 like instead of unplugging every wire and trying remember each wires port wouldnt it be easier to connect each extention one by one as you go?
Yes that would be easier, unfortunately I had to remove the connector entirely in order to pull the wire bundle through the handlebars. That’s the whole reason for taking the connector apart.
@@skydude426 ah i see i have to do this very same project in a few days still debating on doing a wire tuck
"Roach clips"
I'm pretty sure they are called hemostats😆
What happened to your thumbs?
Wiring*
No way I'm gonna be able to domy own bars
71donkrider it's wise to know when you shouldn't get into something.
It's expensive to get into something you shouldn't and mess it up.
Ha you've smoked some herb
Well I’ve seen it done!
@@skydude426 I was laughing about the roach clips. We've all got a pair
@@vinny9988 I know 😁