eBubble and Tilt Sensor Functions with a Trimble R12
HTML-код
- Опубликовано: 10 фев 2025
- In this Tailgate Series video we show you the settings and calibrations for the eBubble and tilt sensor in the Trimble R12. We also demonstrate the functionality of these features.
www.frontierprecision.com
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Good demonstration. Thanks!
Great info, thanks for this video very help full
How important is it to do the first calibration from the "trusted source?" Is it enough to do it with the bipod attached as you do in the video?
It's time for R12i...
The resault looks nice. Is the Calibration required every time you measure ?
No, if you calibrate the receiver away from metallic objects then you can set the amount of time for the calibration. I set this one for a reminder in 90 days.
How do you get the ebubble to appear for topo point? I have it only for observed control points.
Hi Ryan, as long as the Tilt Functions are turned on in the survey style under Rover options, then you should be able to toggle the eBubble on for all measurements including Topo and Rapid. There should be a softkey at the bottom of your screen in Access. If you aren't seeing it, possibly try running Trimble Installation Manager to make sure you have the latest version of Access that you are licensed for along with rebooting the controller. I hope that helps! Thanks again.
How I can cancel the calibrate and ebubble please?
If you don't want to use the ebubble, you can simply turn this function off. Go into your GNSS survey style that you are using and then go into the Rover options. Scroll down to the bottom and uncheck the Tilt functions box. Select Accept and Store. Now you shouldn't be prompted to calibrate. I hope this helps. Thank you.
it is not the IMU RTK?
No, the IMU one which is the new R12i was just released today.